Reed Sensors Lever Arm Sensor > 59210 59210 Small Lever Arm Reed Sensor Description The 59210 is a small lever arm reed sensor in a clip mounting frame with low operating force and an integral two-pin connector. It has normally closed contacts. It is capable of switching up to 140Vac/200Vdc at 10W. The 59210 is available with various other arm configurations (please contact Littelfuse). It is ideally suited to paper path sensing and security system applications. Please contact Littelfuse for optional return spring and other arm configurations. Features • Clip mounting frame • Shrouded terminal accepts Molex SL terminal or equivalent Benefits Agency Approvals Agency • Low operating force • Variety of arm configurations available (contact Littelfuse) • Hermetically sealed, magnetically operated contacts continue to operate long after optical and other technologies fail due to contamination Agency File Number E61760 Note: Contact Littelfuse for specific agency approval ratings. • No standby power requirement Applications • Paper path sensing • Security system switching Dimensions Dimensions in mm (inch) 3.00 (.118) 19.0 23.0 (.748) (.906) 11.58 (.456) 11.00±0.12 (.433±.005) 6.00±0.25 (.236±0.25) 4.10±0.12 (.161±.005) 1.00 (.039 R. MAX.) 2.30±0.12 TYP. (.091 DIA.±.005) 24.00 (.945) 22.00 (.866) 21.00±0.12 (.827±.005) 8.50±0.12 (.335±.005) 8.00 (.315) 10.00 (.394) 13.00 (.512) 9.00 (.354) BOARD MOUNTING DIMENSIONS MATERIAL 1.6±0.21 (.063±.008) © 2015 Littelfuse Revised: 11/02/15 Specifications are subject to change without notice. littelfuse.com Reed Sensors Lever Arm Sensor > 59210 59210 Small Lever Arm Reed Sensor Electrical Ratings Normally Closed Contact Type Switch Type 4 Contact Rating VA/Watt - max. 10 Vdc - max. Vac - max. Vdc - min. 200 140 250 Carry Adc - max. Aac - max. Adc - max. 0.5 1.0 1.2 Contact, Initial Insulation Ω - max. Ω - min. 0.2 1010 Capacitance Contact pF - typ. 0.3 Temperature Operating °C -40 to +105 Voltage 4 Current 4 1 Switching 2 Breakdown Switching Resistance 5 3 2 Product Characteristics Operate Time 6 ms - max. 1.0 Release Time 6 ms - max. 1.0 11ms 1⁄2 sine G - max. 100 50-2000 Hz G - max. 30 Shock 7 Vibration 7 Notes: 1. Contact rating - Product of the switching voltage and current should never exceed the wattage rating. Contact Littelfuse for additional load/life information. 2. When switching inductive and/or capacitive loads, the effects of transient voltages and/or currents should be considered. Refer to Application Notes AN108A and AN107 for details. 3. Breakdown Voltage - per MIL-STD-202, Method 301. 4. Electrical Load Life Expectancy - Contact Littelfuse with voltage, current values along with type of load. 5. This resistance value is for 11.81mm wire length. Resistance changes when wire lengthens. 6. Operate (including bounce)/Release Time - per EIA/NARM RS-421-A, diode suppressed coil (Coil II). 7. Shock and Vibration - per EIA/NARM RS-421-A and MIL-STD-202. Activation Parameters Part Numbering System 59210 - 4 - T - 00 - 0 Must Actuate (Contacts Open) Must Release (Contacts Close) < 15 degrees rotation of arm < 5 degrees rotation back down from rest position Series Switch Type Sensitivity Termination Mates with Molex SL series or equivalent Packaging Packaging Option Packaging Specification Bulk © 2015 Littelfuse Revised: 11/02/15 Specifications are subject to change without notice. Bulk Quantity 500 Quantity & Packaging Code N/A Taping Width N/A littelfuse.com