AN2800 HIGH-DENSITY NEXT GENERATION BROADBAND LOOP CARRIER (BLC) SCALABLE MODULAR PLATFORM BRIDGES THE GAP BETWEEN TRADITIONAL TDM AND IP-ENABLED VOICE WHILE ENABLING INCREMENTAL DSL DELIVERY • • UP TO 2688 POTS / PRODUCT DESCRIPTION XDSL PORTS PER MODULE Modular AN2800 integrates the standalone functionalities of a traditional Digital Loop HIGH AVAILABILITY Carrier (DLC), a next-generation Voice over IP (VoIP) Media Gateway and an IP PLATFORM DSLAM in a single multi-service access platform. By consolidating these three access devices, the platform frees Operators to efficiently add services and DUAL REDUNDANT applications without incurring additional infrastructure expenses. In addition, the POWER AN2800 enables Operators to gradually populate the platform based on subscriber DUAL EXTERNAL CLOCK demand, eliminating costly platform upgrades and providing maximum network INPUT deployment flexibility. The AN2800 presents Operators with an ideal strategy for migrating from TDM to IP-based voice, and triple-play ready data services. N+1 LINE CARD REDUNDANCY APPLICATIONS MGCP / H.248 / SIP • V5 TO VOIP TRANSLATION • DYNAMIC CALL ROUTING BETWEEN V5 AND VOIP • IDLC CONFIGURATION BASED ON V5.2 PROTOCOL • IP-BASED XDSL APPLICATIONS • RELIABLE GE/FE NETWORK INTERFACE FOR IP APPLICATIONS • • • • • • • • The AN2800 platform can be configured to deploy a wide range of narrowband and broadband voice and data applications, to subscribers over a wireline network infrastructure. The AN2800 platform can be deployed in central office as well as remote/building node applications using its wide range of functions. It enables migration from legacy TDM networks to next generation networks enabling IP-based voice as well as broadband data applications using either TDM or IP based transport. The AN2800 platform enables simultaneous deployment of V5.x TDM and VoIP services. When deployed in CO environments, it can connect to existing Remote Terminals (RT) via TDM while providing a VoIP uplink to the network. FEATURES The platform supports a wide range of customer interfaces via plug-in modules including: - MGCP / H.248 VoIP-based supplementary and Centrex services and applications E1/T1 IMA AND STM-1 - T.38 Fax Relay over IP NETWORK INTERFACE - Open PSTN interface: V5.1/V5.2, allowing seamless connections to any LE switch FOR ATM NETWORK for TDM POTS applications Note: For Brazilian market V5.2 ABNT is available. CONNECTIVITY - V5.1/V5.2 based ISDN BRI/PRI applications - Sub-rate / Nx64K / E1 TDM data applications through BRI/E1 or TDM-based INTEGRATED VOICE & SHDSL DATA MODULE WITH SPLITTERS - ADSL / ADSL2 / ADSL2+ support per ITU-T standards - Annex A/ Annex B / Annex C IP-xDSL support as per regional requirements LOW BIT RATE VOICE - STM-1/STM-16 based network interface with Ethernet over SDH capabilities BASED - E1 / STM-1 based network interface for TDM transport ON ITU-T G.729, G.726, - Fast / Gigabit Ethernet network interface for IP transport G.723.1 - E1/T1 IMA and STM-1 based ATM network interface WITH VAD, CNG AND ECHO - Out-of-band management for robust security CANCELLATION 20K BHCA Technical Specifications FEATURES Subscriber Interface Module FXS, BRI, PRI, E1, IPADSL, IPSHDSL, IPVDSL, TDM-SHDSL IVD (Integrated POTS+ADSL) TDM Network Interface Modules STM-1/STM-4/STM-16 (with Ethernet over SDH capability), E1, EOE (Ethernet over E1) IP/ATM Network Interface Modules ICM3, ASM, VPM (voice packetization module) Shelf Configuration 1 to 4-shelf system, 14 Universal line module slots, 2 special slots for control module, 2 special slots for IP aggregation module, 2 half-slots for power modules System Scalability 2688 POTS/ADSL or POTS+ADSL lines Protocols V5.1/V5.2, PRI, Media Gateway Control Protocol (RFC3435), RTCP, H.248, SIP (planned) Digital Signal Processing G.711, G.726, G.729 A/B G.723.1/RFC2833 planned, Echo cancellation based on ITU-T G.168 Voice Activity Detection (VAD) and Comfort Noise Generation (CNG) Call Features Supplementary and Centrex features, 50K BHCA 0.1Erlangs/60s Fax/Modem Transparent Fax and Modem, T.38 support Layer 2 Features Wire-speed switching engine, Rapid Spanning tree (IEEE 802.1 W), VLAN (IEEE 802.1Q), IGMP snooping (v1/v2), MAC layer Class of Service (802.1 p), IP TOS based Class of Service, Port mirroring, Black list, MAC-based port locking IP-xDSL ADSL Full rate (ITU-T G992.1) and G.Lite (ITU-T G.992.2), ANSI T1.413, SHDSL (ITU-T G.991.2/ G.994.1), ADSL2/ADSL2+ (ITU-T G.992.3/G.992.5), RFC2684 multiprotocol encapsulation over AAL5 NMS GUI based network management platform, SNMP, XML based Northbound interface Remote Line testing Metallic loop testing for subscriber lines Reliability and High Availability Hot standby, Dual clock, and Dual power INTEROPERABILITY VoIP Interoperates 3rd party softswitch platforms that comply with IETF/ITU-T standards TDM Interoperates with all industry standard PSTN switches as per ITU-T specifications SDH/E1 Interoperates with all industry standard equipment as per ITU-T standards IP Interoperates with all industry standard layer 2/3 switch equipment as per IEEE / IETF specifications PLATFORM OPERATING POWER/VOLTAGE Maximum Power Consumption 1650watts @ -48V for a chassis fully loaded with 48-port IPADSL modules Maximum Current 35A @ -48V Voltage (Battery powered) -39VDC to -72VDC PHYSICAL Module PCB Size (H x D) 219 mm x 280 mm AN2800 Shelf (H x W x D) 445 mm x 483 mm x 486 mm AN2800 Shelf (H x W x D) 533 mm x 483 mm x 600 mm Racks/Cabinets 1.8m/2.2m/2.6m high as per customer applications; indoor as well as outdoor cabinets. Mounting 19” inch Rack mount (Standard) 23” inch Rack mount (with adapter) ENVIRONMENTAL Operational Temperature 0oC - 50oC (0oC ~ 65oC module ambient temperature) Relative Humidity 95% non-condensing Storage Temperature -40o C ~ 70o C Acoustical Noise Less than 75 dBA REGULATORY COMPLIANCES FCC Part 15 Class A EN 55022, EN 55024, EN 61000 ETSI 300-386 v2.1 CISR 22 EN 60950, UL 60950 ETSI 300-019 ITU-T K.20 VCCI Class A (Japan) CE (Europe) NEC reserves the righ to modify these specifications without prior notice. NEC do Brasil S.A. o Av. Paulista, 2300 – 14 . andar, CEP – 031310 São Paulo – Brasil www.nec.com.br