Datasheet

POLY-FUSE® Resettable PTCs
Surface Mount > 0805L Series
0805L Series
RoHS
Description
he 0805L Series PTC provides surface mount overcurrent
T
protection for applications where space is at a premium
and resettable protection is desired.
Features
• RoHS compliant, lead-free
and halogen-free
• Fast response to fault
currents
• Compact design saves
board space
Agency Approvals
AGENCY
AGENCY FILE NUMBER
Applications
E183209
•U
SB peripherals
•D
isk drives
• CD-ROMs
•P
lug and play protection
for motherboards and
peripherals
R50119118
Additional Information
Datasheet
• Low resistance
• Low-profile
• Compatible with high
temperature solders
•M
obile phones - battery
and port protection
•D
isk drives
•P
DAs / digital cameras
•G
ame console port
protection
Samples
Resources
Electrical Characteristics
I trip
(A)
V max
(Vdc)
I max
(A)
P d typ.
(W)
Part Number
Marking
I hold
(A)
0805L005/30
f3
0.05
0.15
30
40
0805L010
A
0.10
0.30
15
100
Maximum Time
To Trip
Resistance
Agency
Approvals
Current
(A)
Time
(Sec.)
R min
(Ω)
R 1max
(Ω)
0.50
0.25
1.50
3.600
20.000
0.5
0.50
1.50
1.000
6.000
X
X
0805L010/24
J
0.10
0.30
24
100
0.5
0.50
1.50
1.500
6.000
X
X
0805L020
C
0.20
0.50
9
100
0.5
8.00
0.02
0.650
3.500
X
X
0805L035
E
0.35
0.75
6
100
0.5
8.00
0.10
0.250
1.200
X
X
0805L050
1
F
0.50
1.00
6
100
0.5
8.00
0.10
0.150
0.850
X
X
0805L075
G
0.75
1.50
6
40
0.6
8.00
0.20
0.090
0.350
X
X
0805L100
N
1.00
1.95
6
40
0.6
8.00
0.30
0.060
0.210
X
X
0805L110
H
1.10
2.00
6
100
0.8
8.00
0.10
0.050
0.160
X
X
I hold = Hold current: maximum current device will pass without tripping in 20°C still air.
I trip = Trip current: minimum current at which the device will trip in 20°C still air.
V max = Maximum voltage device can withstand without damage at rated current (I max)
I max = Maximum fault current device can withstand without damage at rated voltage (Vmax)
P d = Power dissipated from device when in the tripped state at 20°C still air.
R min = Minimum resistance of device in initial (un-soldered) state.
R typ = Typical resistance of device in initial (un-soldered) state.
aximum resistance of device at 20°C measured one hour after tripping or reflow soldering of 260°C for 20 sec.
R 1max = M
Caution: Operation beyond the specified rating may result in damage and possible arcing and flame.
1 Part Number tested and complied with AEC-Q200.
© 2016 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 04/12/16
POLY-FUSE® Resettable PTCs
Surface Mount > 0805L Series
Temperature Rerating
Ambient Operation Temperature
-40°C
-20°C
0°C
20°C
40°C
0.076
0.14
0.15
0.28
0.47
0.68
1.00
1.35
1.45
0.068
0.12
0.13
0.25
0.44
0.62
0.90
1.25
1.35
0.060
0.11
0.12
0.23
0.39
0.55
0.79
1.10
1.20
0.050
0.10
0.10
0.20
0.35
0.50
0.75
1.00
1.10
50°C
60°C
70°C
85°C
0.038
0.07
0.08
0.14
0.27
0.37
0.57
0.74
0.84
0.033
0.06
0.07
0.12
0.24
0.33
0.53
0.65
0.75
0.028
0.05
0.06
0.10
0.20
0.29
0.41
0.55
0.65
0.023
0.03
0.04
0.07
0.14
0.23
0.34
0.42
0.52
Hold Current (A)
Part Number
0805L005/30
0805L010
0805L010/24
0805L020
0805L035
0805L050
0805L075
0805L100
0805L110
0.043
0.08
0.09
0.17
0.30
0.40
0.63
0.82
0.92
Notes: The temperature rerating data is only for reference, please contact Littelfuse technical support for detail temperature rerating information.
Average Time Current Curves
Temperature Rerating Curve
0.005A/30
0.10A/24
0.10A
0.20A
0.35A
0.50A
0.75A
1.00A
1.10A
170%
Percentage of Rated Current
150%
100
Time in Seconds
10
130%
110%
90%
70%
50%
30%
10%
-40
1
-30 -20
-10
0
10
20 30
40
Temperature (°C)
50
60
70
80
Note:
Typical Temperature rerating curve, refer to table for derating data
0.1
0.01
0.1
1
10
100
Current in Amperes
The average time current curves and Temperature Rerating curve performance is affected
by a number or variables, and these curves provided as guidance only. Customer must
verify the performance in their application.
© 2016 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 04/12/16
POLY-FUSE® Resettable PTCs
Surface Mount > 0805L Series
Soldering Parameters
Pb-Free Assembly
Average Ramp-Up Rate (TS(max) to TP)
3°C/second max
Pre Heat:
Temperature Min (Ts(min))
150°C
Temperature Max (Ts(max))
200°C
Time (Min to Max) (ts)
60 – 180 secs
Time Maintained Temperature (TL)
Above:
Temperature (tL)
217°C
Peak / Classification Temperature (TP)
260+0/-5 °C
Time within 5°C of actual peak
Temperature (tp)
20 – 40 seconds
Ramp-down Rate
6°C/second max
Time 25°C to peak Temperature (TP)
8 minutes Max.
60 – 150 seconds
Physical Specifications
tP
TP
Critical Zone
tL to tP
Ramp-up
TL
TS(max)
Temperature
Profile Feature
tL
Ramp-do
Ramp-down
Preheat
TS(min)
25
tS
time to peak temperature
Time
-- All temperature refer to topside of the package, measured on the package body surface
-- If reflow temperature exceeds the recommended profile, devices may not meet the
performance requirements
-- Recommended reflow methods: IR, vapor phase oven, hot air oven, N2 environment
for lead
-- Recommended maximum paste thickness is 0.25mm(0.010inch)
-- Devices can be cleaned usingstandard industry methods and solvents
-- Devices can be reworked using the standard industry practices
Environmental Specifications
Terminal Material
Solder-Plated Copper
(Solder Material: Matte Tin (Sn))
Operating/Storage
Temperature
-40°C to +85°C
Lead Solderability
Meets EIA Specification RS186-9E,
ANSI/J-STD-002, Category 3
Maximum Device Surface
Temperature in Tripped
State
125°C
Passive Aging
+85°C, 1000 hours
-/+5% typical resistance change
Humidity Aging
+85°C, 85%, R.H.,1000 hours
-/+5% typical resistance change
Thermal Shock
MIL–STD–202, Method 107
+85°C/-40°C 20 times
-30% typical resistance change
Solvent Resistance
MIL–STD–202, Method 215
No change
Vibration
MIL–STD–883, Method 2007,
Condition A
No change
Moisture Sensitivity Level
Level 1, J–STD–020
© 2016 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 04/12/16
POLY-FUSE® Resettable PTCs
Surface Mount > 0805L Series
Dimensions
MARKING CODE VARIES
WITH AMPERAGE RATING
(See Electrical Characteristic Table)
SHOWN IS 1.0AMP RATING
C
A
Top
View
N
Bottom
View
N
Side
View
B
1.20 mm
(.047)
Pad
Layout
D
E
1.00 mm
(.040)
A
Part
Number
1.50 mm
(.059)
B
Inches
mm
Inches
C
mm
Inches
D
mm
Inches
E
mm
Inches
mm
Min Max Min Max Min Max Min Max Min Max Min Max Min Max Min Max Min Max Min Max
0805L005/30 0.08 0.09 2.00 2.20 0.05 0.06 1.20
1.50 0.03 0.05 0.75 1.25 0.01 0.02 0.20 0.55 0.002 0.02 0.05 0.45
0805L010
0.08 0.09 2.00 2.20 0.05 0.06 1.20
1.50 0.02 0.04 0.55 1.00 0.01 0.02 0.20 0.55 0.002 0.02 0.05 0.45
0805L010/24 0.08 0.09 2.00 2.20 0.05 0.06 1.20
1.50 0.02 0.04 0.55 1.00 0.01 0.02 0.20 0.55 0.002 0.02 0.05 0.45
0805L020
0.08 0.09 2.00 2.20 0.05 0.06 1.20
1.50 0.02 0.04 0.55 1.00 0.01 0.02 0.20 0.55 0.002 0.02 0.05 0.45
0805L035
0.08 0.09 2.00 2.20 0.05 0.06 1.20
1.50 0.02 0.03 0.45 0.75 0.01 0.02 0.20 0.55 0.002 0.02 0.05 0.45
0805L050
0.08 0.09 2.00 2.20 0.05 0.06 1.20
1.50 0.03 0.05 0.75 1.25 0.01 0.02 0.20 0.55 0.002 0.02 0.05 0.45
0805L075
0.08 0.09 2.00 2.20 0.05 0.06 1.20
1.50 0.03 0.05 0.75 1.25 0.01 0.02 0.20 0.55 0.002 0.02 0.05 0.45
0805L100
0.08 0.09 2.00 2.20 0.05 0.06 1.20
1.50 0.02 0.07 0.50 1.80 0.01 0.02 0.20 0.55 0.002 0.02 0.05 0.45
0805L110
0.08 0.09 2.00 2.20 0.05 0.06 1.20
1.50 0.03 0.06 0.80 1.40 0.01 0.02 0.20 0.55 0.002 0.02 0.05 0.45
Part Ordering Number System
0805 L 380 /12 TH Y R - A
-A: Automotive grade
Blank: Standard version
SERIES
PACKAGING STYLE
R: Tape & Reel
QUANTITY CODE: K=10,000 Y=4,000 W=3,000 P=2,000
THIN PROFILE
(Not applicable to all parts)
/XX: SPECIAL VOLTAGE RATING
(Not applicable to all parts. Refer
to Electrical Characteristics Table)
I HOLD HOLD CURRENT CODE
(Refer to Electrical Characteristics Table)
L: LITTELFUSE SURFACE MOUNT PPTC
SIZE
Packaging
Part Number
Ordering
Number
Halogen
Free
I hold
(A)
I hold Code
Packaging
Option
Quantity
Quantity &
Packaging Codes
0805L005/30
0805L005/30YR
Yes
0.05
005
Tape and Reel
4000
YR
0805L010
0805L010YR
Yes
0.10
010
Tape and Reel
4000
YR
0805L010/24
0805L010/24YR
Yes
0.10
010
Tape and Reel
4,000
YR
0805L020
0805L020YR
Yes
0.20
020
Tape and Reel
4000
YR
0805L035
0805L035YR
Yes
0.35
035
Tape and Reel
4000
YR
0805L050
0805L050WR
Yes
0.50
050
Tape and Reel
3000
WR
0805L075
0805L075WR
Yes
0.75
075
Tape and Reel
3000
WR
0805L100
0805L100WR
Yes
1.00
100
Tape and Reel
3000
WR
0805L110
0805L110WR
Yes
1.10
110
Tape and Reel
3000
WR
© 2016 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 04/12/16
POLY-FUSE® Resettable PTCs
Surface Mount > 0805L Series
Tape and Reel Specifications
TAPE SPECIFICATIONS: EIA-481-1 (mm)
0805L005/30
0805L010
0805L020
0805L035
0805L010/24
0805L050
0805L075
0805L100
0805L110
W
8.00+/- 0.10
8.00+/- 0.30
8.00+/- 0.30
REEL DIMENSIONS:
EIA-481-1 (mm)
C
Ø178+/- 1.0
F
3.50+/- 0.05
3.50+/- 0.05
3.50+/- 0.05
D
Ø60.2+0.5
E1
1.75+/- 0.10
1.75+/- 0.10
1.75+/- 0.10
H
11.0+/- 0.5
W
9.0+/- 1.5
D0
1.55+/- 0.05
1.55+/- 0.05
1.55+/- 0.05
D1
1.00 (min)
1.00+/- 0.10
1.00+/- 0.10
P0
4.00+/- 0.10
4.00+/- 0.10
4.00+/- 0.10
P1
4.00+/- 0.10
4.00+/- 0.10
4.00+/- 0.10
P2
2.00+/- 0.05
2.00+/- 0.05
2.00+/- 0.05
A0
1.45+/- 0.10
1.65+/- 0.10
1.65+/- 0.10
B0
2.30+/- 0.10
2.35+/- 0.10
2.35+/- 0.10
T
0.25+/- 0.10
0.20+/- 0.10
0.25+/- 0.10
K0
0.90+/- 0.10
1.05+/- 0.10
1.50+/- 0.10
Leader min.
390
390
390
Trailer min.
160
160
160
H
D0
P0
P1
E1
P2
D
F
W
T
D1
D1
K0
W
B0
WARNING
• Users shall independently assess the suitability of these devices for each of their applications
• Operation of these devices beyond the stated maximum ratings could result in damage to the devices and lead to electrical arcing and/or fire
• These devices are intended to protect against the effects of temporary over-current or over-temperature conditions and are not intended to perform as protective devices where such
conditions are expected to be repetitive or prolonged in duration
• Exposure to silicon-based oils, solvents, electrolytes, acids, and similar materials can adversely affect the performance of these PPTC devices
• These devices undergo thermal expansion under fault conditions, and thus shall be provided with adequate space and be protected against mechanical stresses
• Circuits with inductance may generate a voltage (L di/dt) above the rated voltage of the PPTC device.
© 2016 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 04/12/16
C