PRODUCTS High Reliability Commercial Off-the-Shelf (COTS) T513 Multiple Anode Low ESR COTS MnO2 Series Why Choose KEMET Programs Supported KEMET applies world-class service and quality to deliver industry-leading, high performance capacitance solutions worldwide. With 95% of possible dielectric solutions, KEMET offers the world’s most complete line of surface mount and through-hole capacitor technologies across tantalum, ceramic, film, aluminum and paper dielectrics. One world. One KEMET. The KEMET T513 Series is suitable for the high reliability (Commercial Off-the-Shelf) COTS requirements of industrial, telecom, military and aerospace applications: • • • • Radar Sonar Power supplies Guidance systems KEMET Electrical/Physical Characteristics Features & Benefits • • • • • • • • • • • • Meets or exceeds EIA Standard 535BAAC Taped and reeled per EIA 481-1 High surge current capability 100% steady-state accelerated aging RoHS compliance 100% Sn terminations available High ripple current capability Stable temperature performance ESR as low as 10 mΩ Surge current testing options Weibull Grade ‘B’ reliability Termination options All manufacturing lots for this series are conditioned per MIL-PRF-55365 Group A Testing Case Sizes X/7343–43, E/7260–38, D/7343-31 Tolerances K Tolerance (10%), M Tolerance (20%) Cathod Material MnO2 Temperature Range -55°C to +125°C Voltage Options 4 V to 35 V Capacitance Values 15 µF to 1,000 µF Termination Options B, C, H, K, T Product Checklist • • • • • • What is the circuit switching frequency? What is the circuit operating voltage? Are there any voltage spikes expected? Are there any environmental concerns? What are the physical space restrictions? What is the expected annual volume? Ordering Information Capacitor Class T T= Tantalum For more information, samples and engineering kits, please visit us at www.kemet.com or call 1.877.myKEMET. SA0413 Series Case Size Capacitance Capacitance Code (pF) Tolerance Voltage Failure Rate/ Design Lead Material Surge ESR 513 X 108 K 004 B H 61 10 Multiple Anode COTS D, E, X First two digits represent significant figures. Third digit specifies number of zeros. K = ±10% M = ±20% 004 = 4 V 006 = 6.3 V 010 = 10 V 016 = 16 V 020 = 20 V 025 = 25 V 035 = 35 V A = N/A B= 0.1%/1,000 hours C = Hot Solder Dipped H = Standard Solder Coated (SnPb 5% Pb minimum) B = Gold Plated K = Solder Fused T = 100% Tin 61 = None 62 = 10 cycles, 25°C after Weibull 63 = 10 cycles, -55°C & 85°C after Weibull 64 = 10 cycles, -55°C & 85°C before Weibull 10 = Standard ESR 20 = Low ESR 30 = Ultra Low ESR Copyright © 2013 KEMET