With Mounting Flange (“A” Type) PSLSU120 SERIES 120 Watts, AC/DC LED Power Supplies Rev C Wall Industries, Inc. FEATURES • • • • • • • Size: 8.66 x 1.94 x 1.36 inches (220.0 x 49.3 x 34.5 mm) • • • • • • • Class I RoHS Compliant IP68 Rated C.C. Mode and C.V. Mode Constant Current: 0.1~5.71A Constant Voltage: 21~50VDC 4242VDC I/O Isolation Active Power Factor Correction 120 Watts Maximum Output Power Wide Input Voltage Range: 90~305VAC, 47~63Hz Internal EMI Filter Over Voltage, Over Current, & Over Temp. Protection Up to 92% High Efficiency Two types of Mechanical Options Available APPROVALS IP68 Without Mounting Flange (“B” Type) DESCRIPTION Size: 7.87 x 1.94 x 1.36 inches (200.0 x 49.3 x 34.5 mm) The PSLSU120 series of AC/DC LED switching power supplies provides a maximum power rating of 120W, with constant current ratings ranging from 0.1~5.71A and constant voltage ranging from 21~50VDC. These supplies have a 90-305VAC input voltage range, active PFC, an internal EMI filter, and high efficiency up to 92%. These supplies are housed in a 7.87” x 1.94” x 1.36” enclosure, rated to IP68 waterproof standards, which makes them suitable for harsh environments in industrial or commercial outdoor lighting applications. This series is RoHS compliant and has over voltage, over current, and over temperature protection. These supplies are available with a mounting flange (“A” Type) or without the mounting flange (“B” type). MODEL SELECTION TABLE Model Number (2) PSLSU120X-108-21V PSLSU120X-108-22V PSLSU120X-108-23V PSLSU120X-108-24V PSLSU120X-108-25V PSLSU120X-108-26V PSLSU120X-108-27V PSLSU120X-109-27V PSLSU120X-109-28V PSLSU120X-109-29V PSLSU120X-109-30V PSLSU120X-109-31V PSLSU120X-109-32V PSLSU120X-109-33V PSLSU120X-110-33V PSLSU120X-110-34V PSLSU120X-110-35V PSLSU120X-110-36V PSLSU120X-110-37V PSLSU120X-110-38V PSLSU120X-110-39V PSLSU120X-110-40V PSLSU120X-111-40V PSLSU120X-111-41V PSLSU120X-111-42V PSLSU120X-111-43V PSLSU120X-111-44V PSLSU120X-111-45V PSLSU120X-111-46V PSLSU120X-111-47V PSLSU120X-111-48V PSLSU120X-111-49V PSLSU120X-111-50V Input Voltage Range 90 ~ 305 VAC 90 ~ 305 VAC 90 ~ 305 VAC 90 ~ 305 VAC Output Voltage (1) Output Current Ripple & Noise 21 VDC 22 VDC 23 VDC 24 VDC 25 VDC 26 VDC 27 VDC 27 VDC 28 VDC 29 VDC 30 VDC 31 VDC 32 VDC 33 VDC 33 VDC 34 VDC 35 VDC 36 VDC 37 VDC 38 VDC 39 VDC 40 VDC 40 VDC 41 VDC 42 VDC 43 VDC 44 VDC 45 VDC 46 VDC 47 VDC 48 VDC 49 VDC 50 VDC 0.1 ~ 5.71 A 0.1 ~ 5.45 A 0.1 ~ 5.21 A 0.1 ~ 5.00 A 0.1 ~ 4.80 A 0.1 ~ 4.61 A 0.1 ~ 4.44 A 0.1 ~ 4.44 A 0.1 ~ 4.28 A 0.1 ~ 4.13 A 0.1 ~ 4.00 A 0.1 ~ 3.87 A 0.1 ~ 3.75 A 0.1 ~ 3.63 A 0.1 ~ 3.63 A 0.1 ~ 3.52 A 0.1 ~ 3.42 A 0.1 ~ 3.33 A 0.1 ~ 3.24 A 0.1 ~ 3.15 A 0.1 ~ 3.07 A 0.1 ~ 3.00 A 0.1 ~ 3.00 A 0.1 ~ 2.92 A 0.1 ~ 2.85 A 0.1 ~ 2.79 A 0.1 ~ 2.72 A 0.1 ~ 2.66 A 0.1 ~ 2.60 A 0.1 ~ 2.55 A 0.1 ~ 2.50 A 0.1 ~ 2.44 A 0.1 ~ 2.40 A 1% 1% 1% 1% 1% 1% 1% 1% 1% 1% 1% 1% 1% 1% 1% 1% 1% 1% 1% 1% 1% 1% 1% 1% 1% 1% 1% 1% 1% 1% 1% 1% 1% Load Regulation C.C. C.V. 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% Output Power 120W 120W 120W 120W 120W 120W 120W 120W 120W 120W 120W 120W 120W 120W 120W 120W 120W 120W 120W 120W 120W 120W 120W 120W 120W 120W 120W 120W 120W 120W 120W 120W 120W NOTES 1. For constant current (C.C.) mode, the output voltage will vary from Vo to 0.6 x Vo (See C.V. vs C.C. curve on page 4). 2. The red “X” in the model number can either be “A” for models with a mounting flange or “B” for models without a mounting flange. 07/08/2014 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 1 of 4 PSLSU120 SERIES 120 Watts, AC/DC LED Power Supplies Rev C Wall Industries, Inc. SPECIFICATIONS: PSLSU120 SERIES All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS Min Nom Max Unit INPUT SPECIFICATIONS Input Voltage Range Safety Approvals Input Voltage Range 100 277 Operating Input Voltage Range 90 305 Input Frequency 47 Input Current 63 Io = Full Load, Vin = 100VAC 1.8 Io = Full Load, Vin = 240VAC 0.7 Hz A Io = Full Load, 25°C, Cold Start, Vin = 115VAC 37 Io = Full Load, 25°C, Cold Start, Vin = 230VAC 75 No Load Power Consumption Io = No Load, Vin = 230VAC 1 Power Factor Correction (PFC) Io = Full Load, Vin = 90~280VAC Inrush Current VAC 0.90 A W 1.0 OUTPUT SPECIFICATIONS Output Voltage Range See Note 1 See Table Output Current Range See Table Output Power 120 Load Regulation Vin = 230VAC Line Regulation Io = Full Load Ripple & Noise (peak to peak) Full Load, Vin = 90VAC Transient Response Time Full Load to Half Load, Vin = 100VAC Hold-Up Time (C.V. Mode) Io = Full Load, Vin = 100VAC Start-Up Time Io = Full Load, Vin = 100VAC W See Table 0.5 1 % 1 % 4 ms 10 ms 1 s -0.04 +0.04 %/°C Over Voltage Protection 103 105 % Over Current Protection 103 105 % Temperature Coefficient PROTECTION Over Temperature Protection optional GENERAL SPECIFICATIONS Efficiency Io = Full Load, Vin = 230VAC Dielectric Withstanding Voltage 86 Primary to Secondary 4242 Primary to PE 2121 Isolation Resistance Test Voltage = 500VDC Safety Ground Leakage Current Vin = 240VAC/60Hz 92 % VDC 50 MΩ 0.75 mA -20 +70 °C Storage Temperature -40 +85 °C Operating Humidity 0 95 % Storage Humidity 0 95 % ENVIRONMENTAL SPECIFICATIONS Operating Temperature Derating linearly from 100% Load at 60°C to 50% load at 70°C Cooling Free air convection MTBF Operating Temperature at 25°C, calculated per MIL-HDBK-217F 100,000 hours PHYSICAL SPECIFICATIONS Input Connector SJTW, 18AWGx3C (1ft) Output Connector SJTW, 18AWGx2C (1ft) Weight Approx. 1.50~1.65 lbs (680~750g) Dimensions (L x W x H) With Mounting Flange (“A” Type) 8.66 x 1.94 x 1.36 in (220.0 x 49.3 x 34.5 mm) Without Mounting Flange (“B” Type) 7.87 x 1.94 x 1.36 in (200.0 x 49.3 x 34.5 mm) SAFETY & EMC Safety Approvals 07/08/2014 UL/cUL UL8750: 1st edition TUV (EN61347-1: 2008, IEC61347-1: 2007, EN/IEC61347-2-13: 2006) CE-EMC (EN55015: 2006+A2: 2009 & EN61547: 2009) Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 2 of 4 Wall Industries, Inc. PSLSU120 SERIES 120 Watts, AC/DC LED Power Supplies Rev C MECHANICAL DRAWINGS With Mounting Flange (“A” Type) 8.66±0.04 [220.0±1.0] NOTES 1. Unit: inches [mm] 2. Weight: Approx. 1.50~1.65 lbs (680~750g) 3. Input Connector: SJTW, 18AWGx3C (1ft) 4. Output Connector: SJTW, 18AWGx2C (1ft) 5. All dimensions are for reference only 1.94±0.04 [49.3±1.0] 6.54±0.04 [166.0±1.0] R2.5 0.20±0.04 [5.0±1.0] 0.31±0.04 [8.0±1.0] 0.94±0.04 [24.0±1.0] 7.87±0.04 [200.0±1.0] 1.36±0.04 [34.5±1.0] 1.67±0.04 [42.5±1.0] Without Mounting Flange (“B” Type) 7.87±0.04 [200.0±1.0] NOTES 1. Unit: inches [mm] 2. Weight: Approx. 1.50~1.65 lbs (680~750g) 3. Input Connector: SJTW, 18AWGx3C (1ft) 4. Output Connector: SJTW, 18AWGx2C (1ft) 5. All dimensions are for reference only 7.87±0.04 [200.0±1.0] 1.94±0.04 [49.3±1.0] 1.36±0.04 [34.5±1.0] 1.67±0.04 [42.5±1.0] 6.54±0.04 [166.0±1.0] 07/08/2014 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 3 of 4 PSLSU120 SERIES 120 Watts, AC/DC LED Power Supplies Rev C Wall Industries, Inc. CHARACTERISTIC CURVES Derating Curve C.V. vs C.C. Curve 120 Output Voltage (VDC) Output Power (%) 100 80 60 40 20 0 -20 0 20 30 40 50 60 Ambient Temperature (°C) 70 80 Vo Current will regulate to 3% or 5% Iomax depending on model (See Model Selection Table) C.C. Range 0.6xVo Iomin Iomax Output Current (A) COMPANY INFORMATION Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008 certification is just one example of our commitment to producing a high quality, well-documented product for our customers. Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your future projects. Contact Wall Industries for further information: Phone: Toll Free: Fax: E-mail: Web: Address: 07/08/2014 (603)778-2300 (888)597-9255 (603)778-9797 [email protected] www.wallindustries.com 37 Industrial Drive Exeter, NH 03833 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 4 of 4