1008F Series – SMD WIRE WOUND FERRITE CHIP INDUCTORS Rev. A A. Electrical Specifications: P/N 1008F-47N_ 1008F-68N_ 1008F-R10_ 1008F-R18_ 1008F-R20_ 1008F-R24_ 1008F-R56_ 1008F-R68_ 1008F-1R0_ 1008F-1R2_ 1008F-1R5_ 1008F-1R8_ 1008F-2R2_ 1008F-2R7_ 1008F-3R3_ 1008F-3R9_ 1008F-4R3_ 1008F-4R7_ 1008F-5R6_ 1008F-6R8_ 1008F-8R2_ 1008F-100_ 1008F-120_ 1008F-150_ 1008F-220_ L (uH) 0.047 0.068 0.100 0.180 0.200 0.240 0.560 0.680 1.00 1.20 1.50 1.80 2.20 2.70 3.30 3.90 4.30 4.70 5.60 6.80 8.20 10.0 12.0 15.0 22.0 L Test Freq. (MHz) 50 50 50 50 50 50 7.9 7.9 50 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 2.52 Tol. Q Min. K, J K, J K, J K, J K, J K, J K, J K, J K, J K, J K, J K, J K, J K, J K, J K, J K, J K, J K, J K, J K, J K, J K, J K, J K, J 50 40 50 50 50 50 40 27 50 48 41 39 34 34 32 32 30 31 31 31 23 31 30 38 10 Q Test Freq. (MHz) 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 2.52 SRF Min. (GHz) 1.80 1.80 1.80 1.00 0.900 0.900 0.460 0.400 0.380 0.210 0.190 0.170 0.150 0.135 0.120 0.105 0.085 0.090 0.080 0.070 0.065 0.060 0.050 0.050 0.010 DCR Max.(Ω) 0.045 0.045 0.196 0.290 0.285 0.135 0.300 0.320 0.260 0.680 0.760 0.840 1.10 1.28 1.46 1.56 1.70 1.68 1.82 2.00 2.65 2.95 3.35 3.04 2.80 I rms. Max.(mA) 650 650 700 700 700 700 700 700 650 650 630 600 520 490 450 420 400 400 380 360 330 300 270 250 120 1st Color 2nd Color 3rd Color YELLOW BLUE BROWN BROWN RED RED GREEN BLUE BROWN BROWN BROWN BROWN RED RED ORANGE ORANGE YELLOW YELLOW GREEN BLUE GRAY BROWN BROWN BROWN RED VIOLET GRAY BLACK GRAY BLACK YELLOW BLUE GRAY BLACK RED GREEN GRAY RED VIOLET ORANGE WHITE ORANGE VIOLET BLUE GRAY RED BLACK RED GREEN RED BLACK BLACK BROWN BROWN BROWN BROWN BROWN BROWN RED RED RED RED RED RED RED RED RED RED RED RED RED ORANGE ORANGE ORANGE ORANGE Note: 1008F -xxx_: “1008F” = Size Type, “xxx” = Inductance, “_” = Tolerance, K= ± 10%, J= ±5%. B. Dimensions: mm (Inch) Series 1008F Tol. a 2.92 (0.115) b 2.79 (0.110) c 2.03 (0.080) d 0.51 (0.020) e 1.52 (0.060) f 1.27 (0.050) g 1.27 (0.050) h 2.54 (0.100) Max. Max. Max. Typ. Typ. Typ. Typ. Typ. C. Color coding: 1. 2. 3. Parts are marked with 3 color dots. The table below shows the significance of each color. Dots 1 and 2 indicate the inductance in nano-Henries. Dot 3 indicates number of zeroes to be added. 0 = Black 1 = Brown 2 = Red 3 = Orange 4 = Yellow 5=Green 6=Blue 7 = Violet 8 = Gray 9 = White D. General Information: 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. P/N: 1008F -xxx_: “1008F” = Type, “xxx” = Inductance, “_” = Tolerance. Tolerance “_” : K: ± 10%, J: ± 5% Small and lightweight surface mounting type High Q at high frequency High self-resonance frequency For 15ºC Temperature Rise Inductance & Q measured with HP4291B Impedance Analyzer SRF measured with HP8720D or HP8753E Network Analyzer DCR measured with 16502 milliohm meter Operating temperature: -40°C to +85ºC Inductance and Current Range: From 0.047 uH (650 mA) to 22.0 uH (120 mA) SRF: From 10 MHz to 1800 MHz Unspecified values available on request. 14. MSL: Level 1. Frontier Electronics Corp.® http://www.frontierusa.com Page 1 of 2 667 E. Cochran St., Simi Valley, CA 93065 Phone: 1-805-522-9998, Fax: 1-805-522-9989 1008F Series – SMD WIRE WOUND FERRITE CHIP INDUCTORS Rev. A E. Applications: 1. 2. 3. 4. 5. Game Consoles Set Top Boxes Cables Modems Computers Mobile Communication Devices (Cell Phones, Radios, etc.) F. Characteristics Curve: Frontier Electronics Corp.® http://www.frontierusa.com Page 2 of 2 667 E. Cochran St., Simi Valley, CA 93065 Phone: 1-805-522-9998, Fax: 1-805-522-9989