Cree® PLCC4 3-in-1 RGB SMD LED CLMUC-FKA PRODUCT DESCRIPTION FEATURES APPLICATIONS The CLMUC-FKA full-color RGB LED • Size (mm):1.5x 1.5 • Full-Color Video Screen offers a high-intensity light output and • Dominant Wavelength: Red (619 - 624nm) Green (520 - 535nm) Blue (462.5 - 477.5nm) • Decorative lighting a wide viewing angle. The compact 1.5mm x 1.5mm package allows for a very high resolution screen and is designed to work in a wide array of environmental conditions. Cree PLCC full-color RGB LEDs are suited for indoor video screen, decorative lighting and amusement applications. • Amusement • Luminous Intensity (mcd) Red (180 - 355)@ 20mA Green (180 - 355)@10mA Blue (36 - 71)@ 10mA • Moisture Sensitivity Level: 5a • Lead-Free • RoHS Compliant WWW.CREE.COM/HB • Matte Surface Copyright © 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. the Cree logo are registered trademarks of Cree, Inc. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 www.cree.com/xlamp CLD-CT1266.001 PRODUCT FAMILY DATA SHEET Cree PLCC4 3 in 1 SMD RGB LED CLMUC-FKA ABSOLUTE MAXIMUM RATINGS (TA = 25°C) Items Symbol Absolute Maximum Rating Unit R G B IF 25 13 13 mA IFP 70 50 50 mA Reverse Voltage VR 5 5 5 V Power Dissipation PD 63 49 49 mW Operation Temperature Topr -40 ~ +100 °C Storage Temperature Tstg -40 ~ +100 °C Junction Temperature TJ 110 110 110 °C Junction/ambient 1 chip on RTHJA 450 400 450 °C/W Junction/ambient 3 chip on RTHJA 650 580 680 °C/W Junction/solder point 1 chip on RTHJS 300 280 300 °C/W Junction/solder point 3 chip on RTHJS 450 430 480 °C/W Forward Current Note 1 Peak Forward Current Note 2 Note: 1.Single-color light. 2.Pulse width ≤0.1 msec, duty ≤1/10. TYPICAL ELECTRICAL & OPTICAL CHARACTERISTICS (TA = 25°C) Characteristics Condition Symbol Dominant Wavelength IF = 20 mA(R) IF = 10 mA(B.G) Spectral bandwidth at 50% IREL max IF = 20 mA(R) IF = 10 mA(B.G) Forward Voltage IF = 20 mA(R) IF = 10 mA(B.G) Luminous Intensity Reverse Current (max) Values Unit R G B λDOM 619~624 520~535 462.5~477.5 nm Δλ 24 38 28 nm VF(avg) 2.0 3.1 3.1 V VF(max) 2.5 3.8 3.8 V IF = 20 mA(R) IF = 10 mA(B.G) IV(min) 180 180 36 mcd IV(avg) 280 240 50 mcd VR = 5 V IR 10 10 10 μA Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 2 Cree PLCC4 3 in 1 SMD RGB LED CLMUC-FKA INTENSITY BIN LIMIT (RED IF = 20 mA,GREEN & BLUE IF = 10 mA ) Red Green Blue Bin Code Min.(mcd) Max.(mcd) Bin Code Min.(mcd) Max.(mcd) Bin Code Min.(mcd) Max.(mcd) E 180 224 E 180 224 L8 36 45 bc 202 252 bc 202 252 3g3f 41 51 F 224 280 F 224 280 L9 45 56 de 252 318 de 252 318 3e3d 51 64 G 280 355 G 280 355 L 56 71 Tolerance of measurement of luminous intensity is ±10%. COLOR BIN LIMIT (RED IF = 20 mA,GREEN & BLUE IF = 10 mA ) Red Green Blue Bin Code Min.(nm) Max.(nm) Bin Code Min.(nm) Max.(nm) Bin Code Min.(nm) Max.(nm) RB 619 624 G7 520 525 B23 462.5 467.5 G23 522.5 527.5 B4 465 470 G8 525 530 B45 467.5 472.5 G45 527.5 532.5 B5 470 475 G9 530 535 B67 472.5 477.5 Tolerance of measurement of dominant wavelength is ±1 nm. Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 3 Cree PLCC4 3 in 1 SMD RGB LED CLMUC-FKA ORDER CODE TABLE* Luminous Intensity (mcd) Kit Number CLMUC-FKA-CEGEGL8LBB7923673 Color CLMUC-FKA-CE1E1L81BB7C23C3 CLMUC-FKA-CF1E1L91BB7C23C3 Color Bin Max.(nm) Package 619 RB 624 Reel 520 G9 535 Reel B23 462.5 B67 477.5 Reel RB 619 RB 624 Reel Color Bin Min. (nm) 355 RB 355 G7 71 Min. Max. Red 180 Green 180 36 Blue Dominant Wavelength (nm) Red Any 1 Intensity bin from E(180) - G(355) Green Any 1 Intensity bin from E(180) - G(355) Any 1 hue bin from G7(520) - G9(535) Reel Blue Any 1 Intensity bin from L8(36) - L(71) Any 1 hue bin from B23(462.5) - B67(477.5) Reel Red Any 1 Intensity bin from F(224) - G(355) Green Blue RB 619 RB 624 Reel Any 1 Intensity bin from E(180) - G(355) Any 1 hue bin from G7(520) - G9(535) Reel Any 1 Intensity bin from L9(45) - L(71) Any 1 hue bin from B23(462.5) - B67(477.5) Reel Notes: 1. The above kit numbers represent the order codes which include multiple intensity-bin and color-bin codes. Only one intensity-bin code and one color-bin code will be shipped on each reel. Single intensity-bin code and single color- bin code will be orderable in certain quantities. 2. For example, any 1 intensity-bin from E - G means only 1 intensity-bin (E or bc or F or de or G) will be shipped by Cree. 3. For example, any 1 color-bin from G7 - G9 means only 1 color-bin (G7 or G23 or G8 or G45 or G9) will be shipped by Cree. 4. Please refer to the “Cree LED Lamp Reliability Test Standards” document for reliability test conditions. 5. Please refer to the “Cree LED Lamp Soldering & Handling” document for information about how to use this LED product safely. Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 4 Cree PLCC4 3 in 1 SMD RGB LED CLMUC-FKA GRAPHS The above data are collected from statistical figures that do not necessarily correspond to the actual parameters of each single LED. Hence, these data will be changed without further notice. Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 5 Cree PLCC4 3 in 1 SMD RGB LED CLMUC-FKA GRAPHS The above data are collected from statistical figures that do not necessarily correspond to the actual parameters of each single LED. Hence, these data will be changed without further notice. Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 6 Cree PRODUCT PLCC4 3 in 1 SMD RGB LED PRODUCED BY AN AUTODESK EDUCATIONAL CLMUC-FKA MECHANICAL DIMENSIONS All dimensions are in mm. 1 3 2 4 1 2 3 4 1 COMMON ANODE 2 CATHODE FOR Red 3 CATHODE FOR Green 4 CATHODE FOR Blue NOTES PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT RoHS Compliance The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or otherwise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2002/95/ EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as amended through April 21, 2006. Vision Advisory Claim Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye. Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 7 Cree PLCC4 3 in 1 SMD RGB LED CLMUC-FKA KIT NUMBER SYSTEM Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage, and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the “Cree LED Lamp Packaging Standard” document for more information about shipping and packaging options. Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following manner: Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 8 • The temperature profile is as below. Cree PLCC4 3 in 1 SMD RGB LED CLMUC-FKA REFLOW SOLDERING • • • • The CLMUC-FKA is rated as a MSL 5a product. After opening the sealed bag,the SMD LED must be stored under the condition<30ºC and<60%RH. Under these conditions,the SMD LEDs must be used (subject to reflow) within 24 hours after bag opening, and baking 24-hour/80ºC is required when exceeding 24 hours. Note that baking must only be done once. Document No.: COTCO-05-0057 The temperature profile is as below. Rev. NO. : 13 Temperature Melting-point Pre-heat Soak Cooling Reflow Time Use all SMD besides LP6-NPP1-01-N1 Solder = Sn63-Pb37 Solder = Lead-free Preheat time = 100s max. Ramp-down = 6ºC/s max. Preheat temperaturerate = 150ºC ~200ºC Ramp-down rate = 6ºC/s max. Preheat timetemperature = 120s max Peak Peak temperature = 250ºC max. = 230ºC max. Ramp-down rate = 6ºC/s max Time within 5ºC of actual Peak Temperature = 10s max. Peak temperature = 235ºC max Duration above 183ºC is 80s max. Time within 5ºC of actual Peak Temperature = 10s max. Duration above 217ºC is 80s max. Time within 5ºC of actual Peak Temperature = 10s max Duration above is 45s max Only use217ºC LP6-NPP1-01-N1 Preheat time = =100s max. Average ramp-up rate 4ºC/s max Preheat temperature = 150ºC ~200ºC Solder = 4ºC/s max Average ramp-up rate Average ramp-up rate = 4ºC/s max. Use only with CLMUC-FKA Preheat temperature = 100ºC ~150ºC [13] Solder = Low Lead-free Average ramp-up rate = 3ºC/s max. Preheat temperature = 130ºC ~170ºC Preheat time = 120s max. Ramp-down rate = 6ºC/s max. Peak temperature = 213ºC max. Time within 3ºC of actual Peak Temperature = 25s max. Duration above 200ºC is 40s max. Recommended solder pad design for heat dissipation (2-pin SMD LED): Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 7.0 9 Cree PLCC4 3 in 1 SMD RGB LED CLMUC-FKA PACKAGING • • • • • • The CLMUC-FKA is rated as a MSL 5a product. The boxes are not water resistant and they must be kept away from water and moisture. The LEDs are packed in cardboard boxes after packaging in normal or anti-electrostatic bags. Cardboard boxes will be used to protect the LEDs from mechanical shocks during transportation. The reel pack is applied in SMD LED. Max 3500 pcs per reel. H UMIC HECK w ww .vit ap ac .c om Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 10