A...V Series www.vishay.com Vishay BCcomponents Axial Leaded Multilayer Ceramic Capacitors for Automotive Applications Class 1 and Class 2, 50 VDC, 100 VDC, 200 VDC FEATURES • AEC-Q200 qualified with PPAP available • High reliability MLCC insert with wet build process • High operating temperature up to 160 °C • High capacitance with small size • Axial mounting style • Parts compliant with ELV Directive Available • For fully RoHS-compliant alternative A...R Series, please refer to www.vishay.com/doc?45231 • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 Note * This datasheet provides information about parts that are RoHS-compliant and / or parts that are non-RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information / tables in this datasheet for details. APPLICATIONS • Automotive QUICK REFERENCE DATA DESCRIPTION Ceramic Class Ceramic Dielectric Voltage (VDC) Min. Capacitance (pF) Max. Capacitance (pF) Mounting VALUE 50 100 10 000 1 C0G 100 100 10 000 2 200 100 1000 50 470 1 000 000 Axial X7R 100 470 470 000 MARKING CAPACITANCE RANGE Marking indicates capacitance value and tolerance in accordance with “EIA 198” and voltage marks. 100 pF to 1 μF 200 330 68 000 X8R 50 470 330 000 TOLERANCE ON CAPACITANCE OPERATING TEMPERATURE RANGE ± 5 %, ± 10 %, ± 20 % -55 °C to +160 °C (50 % rated voltage above 150 °C) RATED VOLTAGE TEMPERATURE CHARACTERISTICS Class 1: C0G Class 2: X7R, X8R SECTIONAL SPECIFICATIONS Climatic category (acc. to EN 60058-1) Class 1 and 2: 55/125/21 APPROVALS EIA 198 IEC 60384-9 AEC-Q200 DESIGN • The capacitors consist of a high reliability MLCC • The lead wires are 0.5 mm and are made of 100 % tinned copper clad steel wire • Coating is made of yellow colored flame retardant epoxy resin in accordance with UL 94 V-0 Revision: 26-Feb-16 50 VDC, 100 VDC, 200 VDC TEST VOLTAGE • 50 VDC and 100 VDC: 250 % of rated voltage • 200 VDC: 200 % of rated voltage INSULATION RESISTANCE 100 G or 1000 F whichever is less at rated voltage within 2 min of charging. DISSIPATION FACTOR Class 1: 0.1 % max. (at 1 MHz, 1 V where C 1000 pF; at 1 kHz; 1 V where C > 1000 pF) Class 2: 2.5 % max. (at 1 kHz, 1 V) Document Number: 45212 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 A...V Series www.vishay.com Vishay BCcomponents DIMENSIONS (in millimeters) ØD Lb 52.4 ± 1.5 SIZE CODE 15 20 LbMAX. 3.8 5.1 ØDMAX. 2.6 3.1 Note • The leads are matte tinned FeCu wire. MARKING Side one Side two BC XXX DDD t T V XXX: Capacitance code Logo mark (BC or Vishay) t: Tolerance code T: T.C. code V: Voltage code DDD: Date code MARKING CODE DESCRIPTION DDD XXX t V T Date Code The first digit is the year, the last two digits are the week. For example: 109 = 2011, 9th week 217 = 2012, 17th week Capacitance Code Two significant digits followed by one digit for the multiplier as given below. 1 = * 10, 2 = * 100, 3 = * 1000, 4 = * 10 000, 5 = * 100 000 Tolerance Code J=±5% K = ± 10 % M = ± 20 % Voltage Code 1 = 100 V 2 = 200 V 5 = 50 V T.C. Code A = C0G (NP0) C = X7R R = X8R ORDERING CODE INFORMATION A 104 K 15 X7R F 5 TAA V 1 234 5 67 8 9 10 11 12 13 14 15 16 Product Type Capacitance (pF) Capacitance Tolerance Size Code TC Code Rated Voltage Lead Diameter Packaging AEC-Q200 Qualified A = axial leaded MLCC The first two digits are the significant figures of capacitance and the last digit is a multiplier as follows: 1 = * 10 2 = * 100 3 = * 1000 4 = * 10 000 5 = * 100 000 J=±5% K = ± 10 % M = ± 20 % 5 = 0.50 mm ± 0.05 mm TAA = reel UAA = ammo V= AEC-Q200 qualified Revision: 26-Feb-16 Please Please F = 50 VDC refer to refer to H = 100 VDC relevant relevant K = 200 VDC datasheet datasheet Document Number: 45212 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 A...V Series www.vishay.com Vishay BCcomponents ORDERING CODES DIELECTRIC C0G CAP. (pF) 50 VDC 100 VDC 200 VDC 100 A101#15C0GF5###V A101#15C0GH5###V A101#15C0GK5###V 120 A121#15C0GF5###V A121#15C0GH5###V A121#15C0GK5###V 150 A151#15C0GF5###V A151#15C0GH5###V A151#15C0GK5###V 180 A181#15C0GF5###V A181#15C0GH5###V A181#15C0GK5###V 220 A221#15C0GF5###V A221#15C0GH5###V A221#15C0GK5###V 270 A271#15C0GF5###V A271#15C0GH5###V A271#15C0GK5###V 330 A331#15C0GF5###V A331#15C0GH5###V A331#15C0GK5###V 390 A391#15C0GF5###V A391#15C0GH5###V A391#15C0GK5###V 470 A471#15C0GF5###V A471#15C0GH5###V A471#15C0GK5###V 560 A561#15C0GF5###V A561#15C0GH5###V A561#15C0GK5###V 680 A681#15C0GF5###V A681#15C0GH5###V A681#15C0GK5###V 820 A821#15C0GF5###V A821#15C0GH5###V A821#15C0GK5###V 1000 A102#15C0GF5###V A102#15C0GH5###V A102#15C0GK5###V 1200 A122#15C0GF5###V A122#15C0GH5###V - 1500 A152#15C0GF5###V A152#15C0GH5###V - 1800 A182#15C0GF5###V A182#15C0GH5###V - 2200 A222#15C0GF5###V A222#20C0GH5###V - 2700 A272#15C0GF5###V A272#20C0GH5###V - 3300 A332#15C0GF5###V A332#20C0GH5###V - 3900 A392#15C0GF5###V A392#20C0GH5###V - 4700 A472#20C0GF5###V A472#20C0GH5###V - 5600 A562#20C0GF5###V A562#20C0GH5###V - 6800 A682#20C0GF5###V A682#20C0GH5###V - 8200 A822#20C0GF5###V A822#20C0GH5###V - 10 000 A103#20C0GF5###V A103#20C0GH5###V - Notes • Lead diameter is 0.5 mm • # 5th digit is capacitance tolerance code: ± 5 % = J; ± 10 % = K • # 13th, 14th and 15th digits are packaging code: reel = TAA; ammo = UAA RoHS-compliant Not RoHS-compliant, for fully RoHS-compliant alternative A...R Series, please refer to www.vishay.com/doc?45231 Revision: 26-Feb-16 Document Number: 45212 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 A...V Series www.vishay.com Vishay BCcomponents DIELECTRIC X7R CAP. (pF) 50 VDC 100 VDC 200 VDC 330 - - A331#15X7RK5###V 390 - - A391#15X7RK5###V 470 A471#15X7RF5###V A471#15X7RH5###V A471#15X7RK5###V 560 A561#15X7RF5###V A561#15X7RH5###V A561#15X7RK5###V 680 A681#15X7RF5###V A681#15X7RH5###V A681#15X7RK5###V 820 A821#15X7RF5###V A821#15X7RH5###V A821#15X7RK5###V 1000 A102#15X7RF5###V A102#15X7RH5###V A102#15X7RK5###V 1200 A122#15X7RF5###V A122#15X7RH5###V A122#15X7RK5###V 1500 A152#15X7RF5###V A152#15X7RH5###V A152#15X7RK5###V 1800 A182#15X7RF5###V A182#15X7RH5###V A182#15X7RK5###V 2200 A222#15X7RF5###V A222#15X7RH5###V A222#15X7RK5###V 2700 A272#15X7RF5###V A272#15X7RH5###V A272#15X7RK5###V 3300 A332#15X7RF5###V A332#15X7RH5###V A332#15X7RK5###V 3900 A392#15X7RF5###V A392#15X7RH5###V A392#15X7RK5###V 4700 A472#15X7RF5###V A472#15X7RH5###V A472#15X7RK5###V 5600 A562#15X7RF5###V A562#15X7RH5###V A562#15X7RK5###V 6800 A682#15X7RF5###V A682#15X7RH5###V A682#15X7RK5###V 8200 A822#15X7RF5###V A822#15X7RH5###V A822#15X7RK5###V 10 000 A103#15X7RF5###V A103#15X7RH5###V A103#15X7RK5###V 12 000 A123#15X7RF5###V A123#15X7RH5###V A123#15X7RK5###V 15 000 A153#15X7RF5###V A153#15X7RH5###V A153#15X7RK5###V 18 000 A183#15X7RF5###V A183#15X7RH5###V A183#15X7RK5###V 22 000 A223#15X7RF5###V A223#15X7RH5###V A223#15X7RK5###V 27 000 A273#15X7RF5###V A273#15X7RH5###V A273#15X7RK5###V 33 000 A333#15X7RF5###V A333#15X7RH5###V A333#20X7RK5###V 39 000 A393#15X7RF5###V A393#15X7RH5###V A393#20X7RK5###V 47 000 A473#15X7RF5###V A473#15X7RH5###V A473#20X7RK5###V 56 000 A563#15X7RF5###V A563#15X7RH5###V A563#20X7RK5###V 68 000 A683#15X7RF5###V A683#15X7RH5###V A683#20X7RK5###V 82 000 A823#15X7RF5###V A823#15X7RH5###V - 100 000 A104#15X7RF5###V A104#15X7RH5###V - 150 000 A154#15X7RF5###V A154#20X7RH5###V - 220 000 A224#20X7RF5###V A224#20X7RH5###V - 330 000 A334#20X7RF5###V A334#20X7RH5###V (1) - 470 000 A474#20X7RF5###V A474#20X7RH5###V (1) - 560 000 A564#20X7RF5###V (1) - - 680 000 A684#20X7RF5###V (1) - - 1 000 000 A105#20X7RF5###V (1) - - Notes (1) The Ø D is 4.5 mm max. • Lead diameter is 0.5 mm • # 5th digit is capacitance tolerance code: ± 10 % = K; ± 20 % = M • # 13th, 14th and 15th digits are packaging code: reel = TAA; ammo = UAA RoHS-compliant Not RoHS-compliant, for fully RoHS-compliant alternative A...R Series, please refer to www.vishay.com/doc?45231 Revision: 26-Feb-16 Document Number: 45212 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 A...V Series www.vishay.com Vishay BCcomponents DIELECTRIC X8R CAP. (pF) 50 VDC 470 A471#15X8RF5###V 560 A561#15X8RF5###V 680 A681#15X8RF5###V 820 A821#15X8RF5###V 1000 A102#15X8RF5###V 1200 A122#15X8RF5###V 1500 A152#15X8RF5###V 1800 A182#15X8RF5###V 2200 A222#15X8RF5###V 2700 A272#15X8RF5###V 3300 A332#15X8RF5###V 3900 A392#15X8RF5###V 4700 A472#15X8RF5###V 5600 A562#15X8RF5###V 6800 A682#15X8RF5###V 8200 A822#15X8RF5###V 10 000 A103#15X8RF5###V 12 000 A123#15X8RF5###V 15 000 A153#15X8RF5###V 18 000 A183#15X8RF5###V 22 000 A223#15X8RF5###V 27 000 A273#15X8RF5###V 33 000 A333#15X8RF5###V 39 000 A393#15X8RF5###V 47 000 A473#15X8RF5###V 56 000 A563#15X8RF5###V 68 000 A683#20X8RF5###V 82 000 A823#20X8RF5###V 100 000 A104#20X8RF5###V 150 000 A154#20X8RF5###V (1) 220 000 A224#20X8RF5###V (1) 330 000 A334#20X8RF5###V (1) Notes (1) The Ø D is 4.5 mm max. • Lead diameter is 0.5 mm • # 5th digit is capacitance tolerance code: ± 10 % = K; ± 20 % = M • # 13th, 14th and 15th digits are packaging code: reel = TAA; ammo = UAA RoHS-compliant Not RoHS-compliant, for fully RoHS-compliant alternative A...R Series, please refer to www.vishay.com/doc?45231 Revision: 26-Feb-16 Document Number: 45212 5 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 A...V Series www.vishay.com Vishay BCcomponents TAPING AND PACKAGING LABELLING For example: Each reel is provided with a label showing the following details: manufacturer, A style, capacitance, tolerance, batch number, quantity of components, rated voltage, dielectric. On special request other designations can be shown. PACKAGING QUANTITIES AND BOX DIMENSIONS SMALLEST PACKAGING QUANTITY (SPQ) BOX DIMENSIONS L x W x H (mm) 15, 20 7000 370 x 370 x 90 15, 20 4000 265 x 85 x 95 PACKAGING SIZE CODE Tape on reel Ammopack CAPACITORS ON BANDOLIER FOR DIPPED AXIAL A P C H S M B PARAMETER Inside tape spacing Center to tape spacing Cumulative pitch, 6 consecutive components Components pitch Lead bend Exposed adhesive Tape width Lead sandwich SYMBOL B (1) C P A M S T H T DIMENSIONS mm 52.4 ± 1.5 ± 0.8 ± 1.5 5.0 ± 0.5 < 1.2 < 0.51 6.35 > 3.96 INCH 2.062 ± 0.059 ± 0.031 ± 0.059 0.197 ± 0.015 < 0.047 > 0.020 0.250 > 0.156 Note (1) Inside tape spacing 26.0 mm + 1.51 mm/- 0.0 mm is available on request Revision: 26-Feb-16 Document Number: 45212 6 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 A...V Series www.vishay.com Vishay BCcomponents REEL DATA REEL A maximum of 0.5 % of the total number of capacitors per reel may be missing. 69.85 ± 1.5 A maximum of 1 consecutive vacant positions is followed by 6 consecutive components. 355.6 Max. Tape begins and ends with a minimum of 4 empty positions (180 mm tape). Maximum of 5 splicers per reel. Direction of unreeling Arbor hole Ø 28 ± 1 REEL DIMENSIONS A K H1 L REEL SIZE A (mm) Outer diameter 355.6 max. 28 ± 1 L Hole diameter K Core diameter 90 H1 Internal width 69.9 ± 1.5 AMMOPACK DATA AMMOPACK A maximum of 0.5 % of the total number of capacitors per pack may be missing. A maximum of 1 consecutive vacant positions is followed by 6 consecutive components. w = 85 Tape begins and ends with a minimum of 4 empty positions (180 mm tape). T = 95 Maximum of 5 splicers per pack. The cumulative pitch tolerance over 20 consecutive units is not to exceed ± 1.0 mm. L = 265 RELATED DOCUMENTS General Information Revision: 26-Feb-16 www.vishay.com/doc?45214 Document Number: 45212 7 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000