Datasheet

Metal-Oxide Varistors (MOVs)
Industrial High Energy Terminal Varistors > DHB34 Series
DHB34 Varistor Series
RoHS
Description
The DHB34 Series of transient surge suppressors is
comprised of two industrial high-energy Metal-Oxide
Varistors (MOVs) discs placed in parallel as a single device.
They are designed to provide surge suppression in the
AC mains outdoor and service entrance environment
(distribution panels) of buildings. DHB34 applications
also include industrial heavy motors, controls, and power
supplies such as used in the oil-drilling, mining, and
transportation fields, including HVAC and motor/generator
applications.
The DHB34 Series provides rigid terminals for throughhole solder mounting on printed circuit boards, thereby
eliminating the need for screw mounting.
Agency Approvals
Agency
Agency Approval
Agency File Number
UL1449
E320116
22.2-1
91788
Additional Information
Datasheet
Resources
Features
•Lead-Free, HalogenFree and RoHS
Compliant
• Rigid terminals for
secure through-hole
solder mounting
• Wide operating
voltage range
• No derating up to
85ºC ambient
VM(AC)RMS 110V to 750V
• Dual Disc Device two 34mm varistor
discs in parallel in
a single package.
•High–energy
absorption
capability WTM = 220J to 1050J
Samples
• High peak pulse
current (Each of
two discs placed in
parallel) capability
ITM = 40,000A
Absolute Maximum Ratings
• For ratings of individual members of a series, see Device Ratings and Specifications chart
Continuous
DHB34 Series
Units
AC Voltage Range (VM(AC)RMS)
110 to 750
V
DC Voltage Range (VM(DC))
148 to 970
V
40000
A
Steady State Applied Voltage:
Transients:
Peak Pulse Current (ITM)
For 8/20µs Current Wave (See Figure 2)
Single Pulse Energy Range
220 to 1050
J
Operating Ambient Temperature Range (TA)
For 2ms Current Wave (WTM)
-55 to + 85
ºC
Storage Temperature Range (TSTG)
-55 to + 125
ºC
Temperature Coefficient (aV) of Clamping Voltage (VC) at Specified Test Current
<0.01
%/ºC
Hi-Pot Encapsulation (COATING Isolation Voltage Capability)
2500
V
COATING Insulation Resistance
1000
MΩ
CAUTION: Stresses above those listed in "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any
other conditions above those indicated in the operational sections of this specification is not implied.
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/04/15
Metal-Oxide Varistors (MOVs)
Industrial High Energy Terminal Varistors > DHB34 Series
DHB34 Series Ratings & Specifications
Maximum Rating (85°C)
Lead–free
Model
and RoHS
Size
Compliant Models
Disc
Dia.
(mm)
Part Number
Continuous
Specifications (25°C)
Transient
Peak
Current
8 x 20µs
Varistor Voltage at 1mA
DC Test Current
Maximum
Clamping Voltage
VC at 200A
Current (8/20µs)
Typical
Capacitance
VRMS
VDC
Energy
(2ms)
VM(AC)
VM(DC)
WTM
ITM
Min
VN(DC)
Max
VC
f = 1MHz
V111DHB34
34
(V)
110
(V)
148
(J)
220
(A)
40,0001
(V)
156
(V)
173
(V)
190
(V)
288
(pF)
11,600
V131DHB34
34
130
175
270
40,0002
184.5
205
225.5
345
10,000
V141DHB34
34
140
188
291
40,0003
198
220
242
375
9,000
V151DHB34
34
150
200
300
4
40,000
216
240
264
405
8,000
V181DHB34
34
180
240
330
40,000
254
282
310
468
6,800
V201DHB34
34
200
265
350
40,000
283
314
345
533
6,350
V251DHB34
34
250
330
370
40,000
351
390
429
650
5,000
V271DHB34
34
275
369
400
40,000
387
430
473
730
4,500
V301DHB34
34
300
410
430
40,000
423
470
517
780
4,100
V321DHB34
34
320
420
460
40,000
459
510
561
830
3,800
V331DHB34
34
330
435
475
40,000
467
518.5
570
843
3,750
V351DHB34
34
350
460
500
40,000
495
549.5
604
894
3,600
V391DHB34
34
385
510
550
40,000
545
604
663
1,000
3,500
V421DHB34
34
420
560
600
40,000
612
680
748
1,130
3,000
V441DHB34
34
440
585
630
40,000
622
690
758
1,147
2,900
V481DHB34
34
480
640
650
40,000
675
750
825
1,240
2,700
V511DHB34
34
510
675
700
40,000
738
820
902
1,350
2,500
V551DHB34
34
550
710
755
40,000
778
863.5
949
1,404
2,390
V571DHB34
34
575
730
770
40,000
819
910
1001
1,480
2,200
V661DHB34
34
660
850
900
40,000
945
1050
1155
1,720
2,000
V681DHB34
34
680
875
925
40,000
962
1067.5
1173
1,777
1,900
V751DHB34
34
750
970
1050
40,000
1080
1200
1320
2,000
1,800
Note:
1. 40kA capability depends on applications rated up to 97VRMS. 30kA applies if > 97 VRMS.
2.40kA capability depends on applications rated up to 115VRMS. 30kA applies if > 115 VRMS.
3.40kA capability depends on applications rated up to 123VRMS. 30kA applies if > 123 VRMS.
4.40kA capability depends on applications rated up to 132VRMS. 30kA applies if > 132 VRMS.
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/04/15
Metal-Oxide Varistors (MOVs)
Industrial High Energy Terminal Varistors > DHB34 Series
Power Dissipation Ratings
PERCENT OF PEAK VALUE
Peak Pulse Current Test Waveform
100
90
50
10
O1
T
T1
O1 = Virtual Origin of Wave
T = Time From 10% to 90% of Peak
01 = Virtual
ofFront
Wavetime = 1.25 • t
T1 =Origin
Virtual
T = Time
from
10%
to 90%
of Peak
T2 = Virtual Time
to Half
Value (Impulse Duration)
T1 = Rise
Time =For
1.25
T
Example:
anx8/20µs
Current Waveform:
8 s =Time
T1 = Virtual Front Time
T2 = Decay
= Virtual
to Half
Value
20 s- =
T2an
Example
For
8/20 µsTime
Current
Waveform:
Should transients occur in rapid succession, the average
power 100 dissipation result is simply the energy
(watt-seconds) per pulse times the number of pulses
per second. The power so developed must be within
the specifications shown on the Device Ratings and
Specifications table for the specific device. The operating
values must be derated as shown in above.
8µs = T1 = Rise Time
FIGURE
PULSE
CURRENT TEST WAVEFORM
20µs2.=PEAK
T2 = Decay
Time
Repetitive Surge Capability
Maximum Clamping Voltage
10000
50,000
TA = -55 C to 85C
Maximum Clamping Voltage
DHB34 Series
110 to 750V AC Rating
20,000
10,000
V751
V511
V551
V681
V571
1000
V481
V141 V131
V111
V441
SURGE CURRENT (A)
V661
0.01
0.1
1
10
100
1000
10000
10 2
2,000
10 3
1,000
500
V391
V351 V331 V321 V301 V271
V251 V201 V181
DISC SIZE 34mm
V131DHB34 - V751DHB34
1
10 5
10 6
10 4
200
100
50
20
100000
10
Current - AMPS
Figure 3
2
10
5,000
V151
V421
100
0.001
T2
Figure 2
Figure 1
Voltage VOLTS
TIME
Figure 4
INDEFINITE
20
100
1,000
10,000
IMPULSE DURATION ( µs)
FIGURE 4. SURGE CURRENT RATING CURVES FOR
V131DHB34
V751DHB34
NOTE: If pulse ratings are
exceeded, a- shift
of VN(DC) (at specified current) of more than
+/-10% could result. This type of shift, which normally results in a decrease of VN(DC), may
result in the device not meeting the original published specifications, but it does not
prevent the device from continuing to function, and to provide ample protection.
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/04/15
Metal-Oxide Varistors (MOVs)
Industrial High Energy Terminal Varistors > DHB34 Series
Soldering Parameters
Lead–free Profile
Non Lead–free Profile
300
300
250
TEMPERATURE (ºC)
250
TEMPERATURE (ºC)
Maximum Wave 260C
Maximum Wave 240C
200
150
100
100
0
0
0
0.5
1
1.5
Figure 5
2
2.5
3
3.5
0
4
0.5
1
1.5
Figure 6
TIME(MINUTES)
Reflow Condition
Pb – Free assembly
- Temperature Min (Ts(min))
150°C
- Temperature Max (Ts(max))
200°C
- Time (min to max) (ts)
60 – 180 secs
Average ramp up–rate (Liquidus Temp (TL)
to peak
5°C/second max
TS(max) to TL - Ramp-up Rate
5°C/second max
Reflow
150
50
50
Pre Heat
200
- Temperature (TL) (Liquidus)
217°C
- Temperature (tL)
60 – 150 seconds
Peak Temperature (TP)
250+0/-5 °C
Time within 5°C of actual peak
Temperature (tp)
20 – 40 seconds
Ramp-down Rate
5°C/second max
Time 25°C to peak Temperature (TP)
8 minutes Max.
Do not exceed
260°C
2
2.5
3
3.5
4
TIME(MINUTES)
Physical Specifications
Lead Material
Tin–coated Copper
Soldering
Characteristics
Solderability per MIL–STD–202,
Method 208
Insulating Material
Cured, flame retardant epoxy polymer
meets UL94V–0 requirements.
Device Labeling
Marked with LF, voltage, amperage rating,
and date code.
Environmental Specifications
Operating/Storage
Temperature
-55°C to +85°C/-55°C to +125°C
Humidity Aging
+85°C, 85% RH, 1000 hours
+/-10% Voltage change
Thermal Shock
+85°C to -40°C 5 times
+/-10% Voltage change
Solvent Resistance
MIL–STD–202, Method 215
Moisture Sensitivity
Level 1, J-STD-020
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/04/15
Metal-Oxide Varistors (MOVs)
Industrial High Energy Terminal Varistors > DHB34 Series
Dimensions (mm)
Table of Dimensions - Thickness and Terminal Offsets
T max
37.5 max
56 max
12.7 typ
3.7 typ
Dia 3.81 +/- 0.08
25.4 +/- 0.5
Part Type
T Max
S1 +/- 1.15
mm
S2 +/2.30mm
V111DHB34
7.6
2.65
5.50
V131DHB34
7.8
2.85
5.70
V141DHB34
8.2
3.00
6.00
V151DHB34
8.8
3.15
6.30
V181DHB34
9.0
3.25
6.50
V201DHB34
9.2
Series
3.35
6.70
3.00
6.00
3.25
6.50
7.00
V251DHB34
S1
V271DHB34
S2
0.51 typ
DHB
9.10
Dimensions
9.55
V301DHB34
10.20
3.50
V321DHB34
10.60
3.66
7.24
V331DHB34
10.65
3.70
7.40
V351DHB34
10.5
4.10
8.20
V391DHB34
11.2
4.45
8.90
V421DHB34
12.65
4.50
9.00
- Terminals Configuration:
Terminals A & B are connected to one varistor element.
Terminals B & C connected to second varistor element.
V441DHB34
12.80
4.55
9.10
V481DHB34
13.55
4.80
9.60
V511DHB34
13.4
5.25
10.50
- Dimensions:
Measures are in mm is typical, unless otherwise specified.
V551DHB34
14.6
5.70
11.40
V571DHB34
14.8
5.80
11.60
V661DHB34
17.20
6.65
13.30
V681DHB34
17.5
7.00
14.00
V751DHB34
18.20
7.35
14.70
B
A
C
Terminals
Configuration
7.06 +/- 0.2
MOV1
MOV2
NOTES:
Part Numbering System
V 13 1DHB 34
VARISTOR DESIGNATOR
MAX AC RMS WORKING VOLTAGE
(FIRST SIGNIFICANT DIGITS) V M(AC)
DISC SIZE (mm)
SERIES DESIGNATOR
VM(AC) VOLTAGE DECADE MULTIPLIER
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/04/15