CMMD Series Rev. B 20 Watt Single Output 2:1 Wide Input Voltage Range Chassis Mount DC/DC Converter APPLICATIONS FEATURES ● Measurement ● Output Current up to 6A ● Wireless Network ● 2:1 Wide Input Voltage Range ● Telecom/Datacom ● Six-Sided Continuous Shielding ● Industry Control System ● 20 Watts Maximum Output Power ● Semiconductor Equipment ● Options: Negative Logic Remote ON/OFF ● Call Factory for More Output Power Options ● Compliant to RoHS EU Directive 2002/95/EC ● CE Mark Meets 2006/95/EC, 93/68/EEC, and 89/336 EEC ● Chassis Mount Options: Open Frame, U Channel, and Enclosed Types Available SPECIFICATIONS: CMMD Series All specifications apply @ 25°C ambient unless otherwise noted INPUT SPECIFICATIONS GENERAL SPECIFICATIONS Input Voltage Range ............ 12V nominal input .......................... 9-18VDC 24V nominal input ........................ 18-36VDC 48V nominal input ........................ 36-75VDC Efficiency ........................................................................................see table Input Voltage Variation .................... dv/dt ................................ 5V/ms max (Complies with ETS300 132 part 4.4) Input Surge Voltage (100ms max) ....... 12V input ...........................36VDC 24V input ...........................50VDC 48V input .........................100VDC Input Reflected Ripple Current (nominal Vin and full load) ...........20mAp-p Start Up Time (nominal Vin and constant resistive load) Power Up................................................................................10ms typ. Remote ON/OFF ....................................................................10ms typ. Remote ON/OFF (Note 6) (Positive Logic)............... DC-DC ON ................Open or 3V < Vr < 12V DC-DC OFF .............Short or 0V < Vr < 1.2V (Negative Logic) ............. DC-DC ON ...............Short or 0V < Vr < 1.2V DC-DC OFF ..............Open or 3V < Vr < 12V Switching Frequency .................................................................500KHz typ. Isolation Voltage (Input to Output)......................................... 1600VDC min. Isolation Voltage (Input to case) ............................................ 1600VDC min. Isolation Voltage (Output to Case) ........................................ 1600VDC min. 9 Isolation Resistance ...............................................................10 ohms min. Isolation Capacitance .............................................................. 1000pF max. ENVIRONMENTAL SPECIFICATIONS Operating Temperature ................................ -40°C ~ +85°C (with derating) Storage Temperature .......................................................... -55°C ~ +105°C Maximum Case Temperature ............................................................. 100°C Relative Humidity...................................................................5% to 95% RH Input Current of Remote Control Pin (nominal Vin) ........ -0.5mA ~ +0.5mA Thermal Impedance (Note 7) Natural Convection ............................................................. 12°C / Watt Natural Convection with Heat-Sink..................................... 10°C / Watt Remote Off Input Current (nominal Vin) ...........................................2.5mA Thermal Shock ..................................................................... MIL-STD-810F OUTPUT SPECIFICATIONS Vibration ................................10~55Hz, 10G, 30 minutes along X, Y, and Z Output Voltage ..............................................................................see table MTBF (Note 1).................................................................. 1.791 x 10 hours Voltage Accuracy (nominal Vin and full load) ...................................... ±1% PHYSICAL SPECIFICATIONS Voltage Adjustability............................................................................. 10% Potting material of the DC/DC Converter ..........................Epoxy (UL94-V0) Output Current ..............................................................................see table Shielding of the DC/DC Converter.................................................. six-sided Output Power ........................................................................ 20 watts max. Weight .............................................................................Approximately 6oz Line Regulation (LL to HL at FL)....................................................... ±0.2% Dimensions............................................ 4.00(L) x 2.25(W) x 0.81(H) inches Load Regulation (no load to full load) ............................................... ±0.5% SAFETY & EMC Minimum Load ....................................................................................... 0% Approvals and Standards .................. IEC60950-1, UL60950-1, EN60950-1 Ripple/Noise (20 MHz BW) ...........................................................see table (measured with a 0.1uF/50V MLCC) EMI .............................EN55022 ...................................................... Class A Temperature Coefficient ................................................. ±0.02% / °C max. 6 ESD ....................EN61000-4-2…….. Air ± 8KV …….Perf. Criteria B Contact ± 6KV Transient Response Recovery Time (25% load step) .......................250us Radiated Immunity......EN61000-4-3 ....................... 10V/m Perf. Criteria A PROTECTION SPECIFICATIONS Fast Transient.............EN61000-4-4 ......................... ±2KV Perf. Criteria B Over Voltage Protection........... 1.5, 1.8, 2.5, 3.3V outputs..................3.9V (zener diode clamp) 5V output ........................................6.2V 12V output .........................................15V 15V output .........................................18V Surge ..........................EN61000-4-5 ......................... ±1KV Perf. Criteria B Conducted Immunity...EN61000-4-6 .................... 10 Vrms Perf. Criteria A Over Load Protection (% of full load at nominal input).............. 150% max. Short Circuit Protection. ...................................Hiccup, automatic recovery Due to advances in technology, specifications subject to change without notice Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 CMMD Series 20 Watt Single Output 2:1 Wide Input Voltage Range Chassis Mount DC/DC Converter Rev. B OUTPUT VOLTAGE / CURRENT RATING CHART Model Number CMMD12S1.5-6000 CMMD12S1.8-6000 CMMD12S2.5-6000 CMMD12S3.3-5000 CMMD12S5-4000 CMMD12S12-1670 CMMD12S15-1330 CMMD24S1.5-6000 CMMD12S1.8-6000 CMMD24S2.5-6000 CMMD24S3.3-5000 CMMD24S5-4000 CMMD24S12-1670 CMMD24S15-1330 CMMD48S1.5-6000 CMMD48S1.8-6000 CMMD48S2.5-6000 CMMD48S3.3-5000 CMMD48S5-4000 CMMD48S12-1670 CMMD48S15-1330 Input Range 12VDC (9 – 18 VDC) 24VDC (18 – 36 VDC) 48VDC (36 – 75 VDC) Output Voltage 1.5 VDC 1.8 VDC 2.5 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC 1.5 VDC 1.8 VDC 2.5 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC 1.5 VDC 1.8 VDC 2.5 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC Output Current Min. Load Full Load 0mA 6000mA 0mA 6000mA 0mA 6000mA 0mA 5000mA 0mA 4000mA 0mA 1670mA 0mA 1330mA 0mA 6000mA 0mA 6000mA 0mA 6000mA 0mA 5000mA 0mA 4000mA 0mA 1670mA 0mA 1330mA 0mA 6000mA 0mA 6000mA 0mA 6000mA 0mA 5000mA 0mA 4000mA 0mA 1670mA 0mA 1330mA (4) Output Ripple & Noise 60mVp-p 60mVp-p 60mVp-p 60mVp-p 75mVp-p 75mVp-p 75mVp-p 60mVp-p 60mVp-p 60mVp-p 60mVp-p 75mVp-p 75mVp-p 75mVp-p 60mVp-p 60mVp-p 60mVp-p 60mVp-p 75mVp-p 75mVp-p 75mVp-p Input Current (3) (2) No load Full load 70mA 1014mA 75mA 1200mA 80mA 1582mA 115mA 1698mA 75mA 2008mA 90mA 2037mA 35mA 2027mA 35mA 493mA 45mA 584mA 40mA 781mA 30mA 838mA 35mA 980mA 55mA 1006mA 40mA 1002mA 15mA 247mA 20mA 288mA 30mA 391mA 15mA 414mA 20mA 490mA 35mA 497mA 50mA 501mA (4) Eff (%) 78 79 83 85 87 86 86 80 81 84 86 89 87 87 80 82 84 87 89 88 87 NOTES 1. 2. 3. 4. 5. 6. 7. 8. BELLCORE TR-NWT-000332. Case 1: 50% Stress, Temperature at 40ºC. (Ground fixed and controlled environment). Maximum value at nominal input voltage and full load. Typical value at nominal input voltage and no load. Typical value at nominal input voltage and full load. Test by minimum Vin and constant resistive load. The ON/OFF control pin voltage is referenced to -Vin. To order Negative Logic ON-OFF Control add the suffix-R (Ex: CMMD48S12-1670R). Heat sink is optional. Contact Factory for ordering details. Chassis Mount Options: No suffix for open frame, “U” suffix for U Channel, and “E” suffix for Enclosed type. DERATING CURVES & EFFICIENCY GRAPHS Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 (5) Capacitor Load max 65000uF 65000uF 33000uF 13000uF 6800uF 2200uF 755uF 65000uF 65000uF 33000uF 13000uF 6800uF 2200uF 755uF 65000uF 65000uF 33000uF 13000uF 6800uF 2200uF 755uF CMMD Series 20 Watt Single Output 2:1 Wide Input Voltage Range Chassis Mount DC/DC Converter Rev. B MECHANICAL DRAWING Unit: inches [mm] TRM + Out -Out -Vin CNTL + Vin 4.00 [101.6] MODEL NAME LABEL 2.25 [57.2] .17 [4.3] 1.13 [28.6] 3.66 [93.0] .16 [4.06] 2X Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 .81 [20.6]