750W Extended Band Compact HPA for Satellite Communications K u -B a n d The VZU6997AB 750 watt TWT High Power Amplifier— high efficiency in a compact package Ku-Band Easy to Maintain Provides 750 watts of power in a 5 rack unit package, digital ready, for wideband, singleand multi-carrier satellite service in the 12.75 to 14.50 GHz frequency band. Ideal for transportable and fixed earth station applications where space and prime power are at a premium. Modular design and built-in fault diagnostic capability with convenient and clearly visible indicators for easy maintainability in the field. Efficient Employs a high efficiency dual-depressed collector helix traveling wave tube backed by many years of field-proven experience in airborne and military applications. Worldwide Support Backed by over three decades of satellite communications experience, and CPI’s worldwide 24-hour customer support network that includes twenty regional factory service centers. Simple to Operate User-friendly microprocessor-controlled logic with integrated computer interface, digital metering, pin diode attenuation and optional integrated linearizer for improved intermodulation performance. Global Applications Meets International Safety Standard EN-60215, Electromagnetic Compatibility 2004/108/EC and Harmonic Standard EN-61000-3-2 to satisfy worldwide requirements. 811 Hansen Way P.O. Box 51625, Palo Alto, CA 94303 tel: +1 (650) 846-3803 fax: +1 (650) 424-1744 e-mail: [email protected] www.cpii.com/satcom 7 5 0 W E x t e n d e d B a n d C o m p a c t H PA Compact Ku-Ba n d SPECIFICATIONS, VZU6997AB Electrical OPTIONS: Frequency 12.75 to 14.50 GHz Output Power TWT Flange 750 W min. (58.8 dBm) 650 W min. (58.1 dBm) Bandwidth 1750 MHz Gain 70 dB min. at rated power, 88 dB max. 75 dB min. at small signal, 90 dB max. RF Level Adjust Range 0 to 20 dB (via PIN diode attenuator) • Integral Linearizer • Remote Control Panel Gain Stability At constant drive & temp. • Redundant and Power Combined Subsystems Over temp., constant drive (any frequency) • External Receive Band Reject Filter (Increases loss by a minimum of 75 dB up to 12.75 GHz) Small Signal Gain Slope • L-Band Block Upconverter (BUC) --- specifications for when BUC is included are not contained in this document. Refer to CPI document TD-89. Electrical (continued) Small Signal Gain Variation Across any 80 MHz band Across the 1750 MHz band Across 1750 MHz, with linearizer -23 dBc or better with two equal carriers at total output power level of 51.13 dBm (-25 dBc at 54.63 dBm with linearizer) Group Delay (in any 80 MHz band) 0.02 ns/MHz linear max. 0.005 ns/MHz sq. parabolic max. 0.5 ns pk-pk ripple max. Primary Power Voltage Frequency Single phase, 208-240 VAC ±10% 47-63 Hz ±0.25 dB/24 hr. max. (after 30 min. warmup) ±1.0 dB over oper. temp. range (typical) ±0.75 dB over ±10°C (typical) Power Consumption 2.3 kVA typ. (at small signal) 3.0 kVA max. Power Factor 0.95 min. ±0.04 dB/MHz max. Inrush Current 200% max. Environmental (Operating) 1.0 dB pk-pk max. 3.5 dB pk-pk max. 5.5 dB pk-pk max. Input VSWR 1.3:1 max. Output VSWR 1.3:1 max. Load VSWR Continuous operation Full spec. compliance Operation without damage 2.0:1 1:5:1 Any value Phase Noise IESS-308/309 phase noise profile -10 dB AC fundamentals related -36 dBc Sum of spurs (370 Hz to 1 MHz) -47 dBc AM/PM Conversion Intermodulation 2.5°/dB max. for a single-carrier at 8 dB below rated CW power. With optional integral linearizer, improves to 1.0 deg/dB max. Ambient Temperature -10°C to +50°C operating -40°C to +70°C non-operating Relative Humidity 95% non-condensing Altitude 10,000 ft. with standard adiabatic derating of 2°C/1000 ft., operating; 50,000 ft., non-operating Shock and Vibration Designed for normal transportation environment per Section 514.4 MIL-STD-810E. Designed to withstand 20G at 11 ms (1/2 sine pulse) in non-operating condition. Mechanical Cooling Forced air with integral blower. Rear air intake & exhaust. Maximum external pressure loss allowable: 0.5 inches water column RF Input Connection Type N female Harmonic Output -80 dBc at rated CW power, second and third harmonics RF Output Connection WR-75 waveguide flange, grooved, threaded UNC 2B 6-32 Noise and Spurious <-120 dBW/4 kHz, 10.0 to 11.7 GHz <-65 dBW/4 kHz, passband <-60 dBW/4 kHz, passband with linearizer option RF Output Monitor Type N female Dimensions (W x H x D) 19 x 8.75 x 24 in. (483 x 222 x 610 mm) Weight 95 lbs (43 kg) max. Heat and Acoustic Certificate Number: 30515 For more detailed information, please refer to the corresponding CPI Technical Description. Note: Specifications may change without notice as a result of additional data or product refinement. Please contact CPI before using this information for system design. MKT 331, ISSUE D JUN 13 PDF Heat Dissipation 2000 watts max. Acoustic Noise 68 dBA (as measured at 3 ft.)