CSM0315D Series SMD WIRE WOUND POWER INDUCTORS (SHIELDED) Rev. A A. Electrical Specifications: P/N L (uH) Tol. Mark Test Freq. (MHz) DCR Max. (Ω) I sat. Max. (A) I rms Max. (A) CSM0315D-1R0N CSM0315D-1R5N CSM0315D-1R8N CSM0315D-2R2N CSM0315D-2R7N CSM0315D-3R3M CSM0315D-3R6M CSM0315D-4R7M CSM0315D-5R1M CSM0315D-6R2M CSM0315D-6R8M CSM0315D-100M CSM0315D-120M CSM0315D-150M CSM0315D-180M CSM0315D-220M CSM0315D-330M CSM0315D-390M CSM0315D-430M CSM0315D-470M CSM0315D-560M CSM0315D-680M CSM0315D-101M 1.0 1.5 1.8 2.2 2.7 3.3 3.6 4.7 5.6 6.2 6.8 10 12 15 18 22 33 39 43 47 56 68 100 ± 20%, ± 30% ± 20%, ± 30% ± 20%, ± 30% ± 20%, ± 30% ± 20%, ± 30% ± 20%, ± 30% ± 20%, ± 30% ± 20%, ± 30% ± 20%, ± 30% ± 20%, ± 30% ± 20%, ± 30% ± 20%, ± 30% ± 20%, ± 30% ± 20%, ± 30% ± 20%, ± 30% ± 20%, ± 30% ± 20%, ± 30% ± 20%, ± 30% ± 20%, ± 30% ± 20%, ± 30% ± 20%, ± 30% ± 20%, ± 30% ± 20%, ± 30% 1R0 1R5 1R8 2R2 2R7 3R3 3R6 4R7 5R6 6R2 6R8 100 120 150 180 220 330 390 430 470 560 680 101 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0.0360 0.0480 0.0650 0.0720 0.0975 0.0960 0.1365 0.1360 0.1625 0.2535 0.2110 0.2678 0.4160 0.4220 0.5590 0.5980 0.9590 1.2940 1.3780 1.4060 1.6640 3.5100 2.9200 2.10 1.80 1.75 1.48 1.52 1.21 1.28 1.08 1.08 1.00 0.90 0.75 0.70 0.58 0.56 0.47 0.39 0.41 0.37 0.32 0.33 0.28 0.23 2.10 1.90 1.70 1.60 1.43 1.45 1.20 1.25 1.09 0.86 0.90 0.87 0.68 0.65 0.59 0.55 0.45 0.39 0.37 0.40 0.34 0.23 0.25 B. Dimensions: mm (Inch) Series CSM0315D Tol. a b c d 3.0 (0.118) ±0.1 (0.004) 3.0 (0.118) ±0.1 (0.004) 1.5 (0.059) 2.7 (0.106) Max. Typ. e f 0.9 (0.035) 1.2 (0.047) Typ. Typ. g h 1.0 (0.039) 2.7 (0.106) Typ. Typ. C. General Information: 1. CSM0315D-xxx_, “CSM0315D” = P/N, “xxx” = Inductance, “_” = Tolerance. 2. Tolerance “_”: M: ± 20%, N: ± 30% 3. Test Freq.: 1MHz, 1V 4. Magnetically shielded 5. High saturation current 6. I sat: based on inductance decrease 30% (at 20 ºC ambient). 7. I rms: based on temperature increase 40ºC (at 20 ºC ambient). 8. Operating temperature range: -25ºC to +105ºC (Including self-heating). 9. Storage temperature: -40ºC to +85ºC. 10. Inductance measured: CH-3302, HP4286A or equivalent. 11. DCR measured: CHROMA 16502 or equivalent. 12. Inductance and Current Range: From 1.0 uH (2.1 A) to 100 uH (0.25 A) 13. MSL: Level 1. Frontier Electronics Corp.® http://www.frontierusa.com Page 1 of 2 667 E. Cochran St., Simi Valley, CA 93065 Phone: 1-805-522-9998, Fax: 1-805-522-9989 CSM0315D Series SMD WIRE WOUND POWER INDUCTORS (SHIELDED) Rev. A D. Applications: 1. 2. 3. 4. 5. 6. Game Consoles Set Top Boxes Cables Modems Computers Mobile Communication Devices (Cell Phones, Radios, etc.) PDA, LCD, DVD, BRP, HD. E. Characteristics Curve: Frontier Electronics Corp.® http://www.frontierusa.com Page 2 of 2 667 E. Cochran St., Simi Valley, CA 93065 Phone: 1-805-522-9998, Fax: 1-805-522-9989