5/8 - 27 UNS THREAD 0.43 11.0 K603 O-RING KIT SEE NOTE 4 HANDLE / STRAIN RELIEF (SEE TABLE) 0.70 17.8 0.53 13.4 1.01 25.7 SECTION A-A 913S/913DS MOMENTARY SWITCH SEALING HANDLE HOUSING - NICKEL PLATED, COPPER ALLOY BUTTON SEAL - THERMOPLASTIC, BLACK INSULATORS - RIGID PLASTIC TERMINALS - SILVER PLATED, COPPER ALLOY O-RING - THERMOPLASTIC RUBBER HANDLE - THERMOPLASTIC, BLACK OVERMOLD - THERMOPLASTIC RUBBER, BLACK TERMINAL A TERMINAL C TERMINAL C TERMINAL B TERMINAL B TERMINAL A 913S SCHEMATIC WHITE DOT ON BACK OF SWITCH DESIGNATES "1-D" CIRCUIT A 0.68 17.4 3.01 76.4 0.39 10.0 913DS SCHEMATIC 1C - CIRCUIT 2.22 56.3 1D - CIRCUIT SEALED BUTTON SWITCH PART NUMBER SWITCH CIRCUIT EP913S14 0.140 - 0.170 EP913S17 0.90 22.9 913S EP913S20 1-C 0.170 - 0.200 0.200 - 0.230 EP913S23 0.230 - 0.255 EP913DS14 0.140 - 0.170 EP913DS17 A CABLE NOMINAL O.D. RANGE 913DS EP913DS20 1-D EP913DS23 0.170 - 0.200 0.200 - 0.230 0.230 - 0.255 CUSTOMER DRAWING NOTES: THIS DRAWING DESCRIBES A DESIGN CONSIDERED PROPRIETARY IN NATURE, DEVELOPED AND MANUFACTURED BY SWITCHCRAFT INC. AND IS RELEASED ON A CONFIDENTIAL BASIS FOR IDENTIFICATION PURPOSES ONLY. 1. COMPLETED ASSEMBLY ON CABLE MEETING MINIMUM REQUIREMENT SPECIFICATIONS SHALL MEET IP67 RATING. UNLESS OTHERWISE SPECIFIED 2. OUTER JACKET OF CABLE USED IN ASSEMBLY MUST BE SMOOTH, ROUND, FLEXIBLE, AND FALL WITHIN THE SPECIFIED CABLE RANGE PER THE HANDLE. 1. ALL DIMENSIONS IN INCHES [mm] 3. USING CABLE OD CLOSER TO THE CABLE RANGE MAXIMUM PER HANDLE WILL ENSURE A MORE SECURE SEAL. 4. SWITCH AND O-RING SHIPPED UNASSEMBLED. 5. THIS PART IS RoHS COMPLIANT. SIZE WIDTH FINISH - TWO PLACE DECIMALS 0.02 [0.5] - THREE PLACE DECIMALS 0.005 [0.13] REV 27625 ECO NUMBER 12-9-15 DATE REVISIONS TO SPEC No. FIRST USED ON BY 02/29/12 TJK APVD DO NOT SCALE DRAWING SolidWorks CAD File NAME B LBS/M TEMPER MATERIAL DATE DRAWN A MULT SPEC No. SCALE 3:2 - BY TS CHKD TS 02/29/12 APVD TJK 12-29-15 SEALED CORD SWITCH ASSEMBLY, RoHS SHEET PART No. 1 OF EP913_S__SERIES 1 REV A