AOS Semiconductor Product Reliability Report AOK75B60D1, rev A Plastic Encapsulated Device ALPHA & OMEGA Semiconductor, Inc www.aosmd.com 1 This AOS product reliability report summarizes the qualification result for AOK75B60D1. Accelerated environmental tests are performed on a specific sample size, and then followed by electrical test at end point. Review of final electrical test result confirms that AOK75B60D1 passes AOS quality and reliability requirements. The released product will be categorized by the process family and be routine monitored for continuously improving the product quality. Table of Contents: I. II. III. IV. Product Description Package and Die information Reliability Stress Test Summary and Results Reliability Evaluation I. Product Description: • AlphaIGBT (аIGBT) technology • Low VCE(SAT) enables high efficiencies • Smooth Switching waveforms reduce EMI • Better thermal management • Minimal gate spike under high dV/dt Applications: • Welding Machines • Solar Inverters • Uninterruptible Power Supplies Details refer to the datasheet. II. Die / Package Information: Process Package Type Lead Frame Die Attach Bond Mold Material AOK75B60D1 Standard sub-micron TM 600V Alpha IGBT with Diode TO-247 Bare Cu Solder Paste Al wire Epoxy resin with silica filler 2 III. Reliability Stress Test Summary and Results Test Item Test Condition Time Point Total Sample Size Number of Failures Reference Standard HTGB Temp = 175°C , Vge=100% of Vgemax 168 / 500 / 1000 hours 693 pcs 0 JESD22-A108 HTRB Temp = 175°C , Vce=80% of Vcemax 168 / 500 / 1000 hours 693 pcs 0 JESD22-A108 96 hours 1155 pcs 0 JESD22-A110 1000 hours 1155 pcs 0 JESD22-A101 130°C , 85%RH, 33.3 psia, Vce = 80% of Vcemax up to 42V 85°C , 85%RH, Vce = 80% of Vcemax up to 100V HAST H3TRB Autoclave 121°C , 29.7psia, RH=100% 96 hours 1155 pcs 0 JESD22-A102 Temperature Cycle -65°C to 150°C , air to air, 250 / 500 / 1000 cycles 1155 pcs 0 JESD22-A104 HTSL Temp = 175°C 1000 hours 924 pcs 0 JESD22-A103 Power Cycling Tj = 100°C 5min on / 5min off 6000 cycles 1155 pcs 0 AEC Q101 Resistance to Temp = 260°C 10 seconds 30 pcs 0 JESD22-B106 Solder Heat Note: The reliability data presents total of available generic data up to the published date. IV. Reliability Evaluation FIT rate (per billion): 1.05 MTTF = 109175 years The presentation of FIT rate for the individual product reliability is restricted by the actual burn-in sample size. Failure Rate Determination is based on JEDEC Standard JESD 85. FIT means one failure per billion hours. 2 9 Failure Rate = Chi x 10 / [2 (N) (H) (Af)] = 1.05 9 MTTF = 10 / FIT = 109175 years Chi²= Chi Squared Distribution, determined by the number of failures and confidence interval N = Total Number of units from burn-in tests H = Duration of burn-in testing Af = Acceleration Factor from Test to Use Conditions (Ea = 0.7eV and Tuse = 55°C) Acceleration Factor [Af] = Exp [Ea / k (1/Tj u – 1/Tj s)] Acceleration Factor ratio list: 55 deg C 70 deg C 85 deg C 100 deg C 125 deg C Af 758 256 95 38 9.7 Tj s = Stressed junction temperature in degree (Kelvin), K = C+273.16 Tj u =The use junction temperature in degree (Kelvin), K = C+273.16 k = Boltzmann’s constant, 8.617164 X 10-5eV / K 150 deg C 175 deg C 2.9 1 3