DATA SHEET SMSA3923-011LF: Surface Mount Mixer/Detector Schottky Diode Automotive Applications Infotainment Navigation Telematics Garage door openers Wireless control systems Features AEC-Q101 qualified ISO/TS16949 certified facility Package rated MSL1, 260 C per JEDEC J-STD-020 Description The SMSA3923-011LF plastic packaged Schottky diode is designed for several automotive in-vehicle applications. Table 1 describes the SMSA3923-011LF package and marking. Skyworks GreenTM products are compliant with all applicable legislation and are halogen-free. For additional information, refer to Skyworks Definition of GreenTM, document number SQ04–0074. Table 1. Packaging and Marking Single SOD-323 Green™ SMSA3923-011LF Marking: XB LS = 1.5 nH The Pb-free symbol or “LF” in the part number denotes a lead-free, RoHScompliant package unless otherwise noted as Green™. Tin/lead (Sn/Pb) packaging is not recommended for new designs. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 203196B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • April 9, 2015 1 DATA SHEET • SMSA3923-011LF: MIXER/DETECTOR SCHOTTKY DIODE Electrical and Mechanical Specifications Package and Handling Information The absolute maximum ratings of the SMSA3923-011LF are provided in Table 2. Electrical specifications are provided in Table 3. The associated SPICE model parameters are provided in Table 4. Instructions on the shipping container label regarding exposure to moisture after the container seal is broken must be followed. Otherwise, problems related to moisture absorption may occur when the part is subjected to high temperature during solder assembly. Typical performance characteristics of the SMSA3923-011LF series are illustrated in Figure 1. Package dimensions are shown in Figure 2, and tape and reel dimensions are provided in Figure 3. The SMSA3923-011LF is rated to Moisture Sensitivity Level 1 (MSL1) at 260 C for 5 seconds. It can be used for lead or leadfree soldering. For additional information, refer to the Skyworks Application Note, Solder Reflow Information, document number 200164. Care must be taken when attaching this product, whether it is done manually or in a production solder reflow environment. Production quantities of this product are shipped in a standard tape and reel format. Table 2. SMSA3923-011LF Absolute Maximum Ratings (Note 1) Parameter Symbol Minimum Maximum Units Rated VB V Reverse voltage c Forward current IF 50 mA Power dissipation @ 25 °C lead temperature PD 75 mW Storage temperature TSTG –65 +150 C Operating temperature TA –65 Junction temperature TJ Electrostatic discharge: ESD Charged Device Model (CDM), Class 4 Human Body Model (HBM), Class 0 Machine Model (MM), Class A +150 C +150 C >1100 <250 <50 V V V Note 1: Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device. CAUTION: Although this device is designed to be as robust as possible, electrostatic discharge (ESD) can damage this device. This device must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD precautions should be used at all times. Table 3. SMSA3923-011LF Electrical Specifications (Note 1) (TA = +25 C, Per Junction Unless Otherwise Noted) Part Number SMSA3923-011LF VB @ 10 μA (V, Minimum) 20 IR CT @ 0 V (pF) VF @ 1 mA (mV) Pair Configuration ΔVF @ 1 mA (mV, Maximum) VF, Maximum <500 nA @ 15 V 0.83 to 1.30 310 to 370 10 <1000 mV @ 35 mA Note 1: Performance is guaranteed only under the conditions listed in this table. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 2 April 9, 2015 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 203196B DATA SHEET • SMSA3923-011LF: MIXER/DETECTOR SCHOTTKY DIODE Table 4. SPICE Model Parameters Parameter Units SMSA3923-011LF IS A 5E-9 RS Ω 10 N – 1.05 TT sec 8E-11 CJO pF 0.9 M – 0.24 EG eV 0.69 XTI – 2 FC – 0.5 BV V 46 Ibv A 1E-5 VJ V 0.640 Typical Performance Characteristics (TA = +25 C, Per Junction Unless Otherwise Noted) 1.20 Capacitance (pF) 1.00 0.80 0.60 0.40 0.20 0 0 5 10 15 20 Reverse Voltage (V) Figure 1. SMSA3923-011LF Total Capacitance vs Reverse Voltage Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 203196B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • April 9, 2015 3 DATA SHEET • SMSA3923-011LF: MIXER/DETECTOR SCHOTTKY DIODE 0.060 (1.52 mm) Min. 0.070 (1.78 mm) Max. 0.090 (2.29 mm) Min. 0.107 (2.72 mm) Max. 0.044 (1.12 mm) Min. 0.054 (1.37 mm) Max. 1 0.000 (0 mm) Min. 0.004 (0.10 mm) Max. 0.013 (0.33 mm) Min. 0.017 (0.43 mm) Max. 2 0.012 (0.305 mm) Min. 0.016 (0.406 mm) Max. Cathode Indicator 0.036 (0.91 mm) Min. 0.046 (1.17 mm) Max. 0.008 Ref. 0.025 (0.635 mm) Min. 0.037 (0.940 mm) Max. Gauge Datum For Foot Length Measurement 0.005 (0.127 mm) Min. 0.008 (0.203 mm) Max. 0.010 (0.25 mm) Min. 0.018 (0.46 mm) Max. Dimensions are in inches (millimeters shown in parentheses) S1619 Figure 2. SOD-323 Package Dimensions 4.00 2.00 ± 0.05 Pin 1 Indicator Ø1.00 Min. 4.00 (See Note 4) 1.75 ± 0.10 A R0.3 Max. 3.50 ± 0.05 2.90 (Bo) 2.08 1.35 (Ko) A 1.52 (Ao) R0.5 Typ. 1.07 (K1) A 0.84 Notes: 1. Carrier tape: black conductive polystyrene. 2. Cover tape: transparent conductive PSA. 3. Cover tape size: 5.4 mm width. 4. 10 sprocket hole pitch cumulative tolerance: ±0.20 mm. 5. All measurements are in millimeters. Figure 3. SOD-323 Tape and Reel Dimensions Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 4 8.00 +0.30/–0.10 0.30 ± 0.05 Ø1.50 +0.1/–0 April 9, 2015 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 203196B S2910 DATA SHEET • SMSA3923-011LF: MIXER/DETECTOR SCHOTTKY DIODE Copyright © 2014-2015 Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes. No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of Sale. THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury, death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters. Skyworks and the Skyworks symbol are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 203196B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • April 9, 2015 5