data sheet AS200-313LF: PHEMT GaAs IC 2 W High-Linearity 5–6 GHz T/R Switch Applications l Simplified Block Diagram T/R switch in WLAN 802.11a systems J2 CBL Features Operating frequency 5–6 GHz l High linearity 50 dBm IIP3 l High power P -1 dB > 33 dBm l Low positive control voltage 3 V l Low-cost, ultrasmall QFN package l A vailable lead (Pb)-free and RoHS-compliant MSL-1 @ 260 °C per JEDEC J-STD-020 1 6 V1 2 l J3 CBL 5 3 CBL J1 4 V2 Description The AS200-313LF is a 5–6 GHz PHEMT GaAs switch. Designed for transmit-receive applications, this device is capable of switching 2 W microwave signals with 3 V control while maintaining high-linearity performance. The switch covers the entire 802.11a frequency ranges of 5.15–5.825 GHz. The lowloss, high-isolation, high-linearity and low-cost features make it ideal for wireless LAN systems in the 802.11a frequency band. NEW Skyworks offers lead (Pb)-free, RoHS (Restriction of Hazardous Substances)-compliant packaging. Electrical Specifications at 25 °C (0, 3 V) Parameter(1) loss(2) Frequency Min.Typ. Max. Unit 1.5 1.5 1.5 dB dB dB Insertion 5.0–6.0 GHz 5.0–5.4 GHz 5.5–6.0 GHz 1.3 1.3 1.3 Isolation 5.0–6.0 GHz 5.0–5.4 GHz 5.5–6.0 GHz 26 26 26 30 30 30 dB dB dB Return loss(3) 5.0–5.4 GHz 5.5–6.0 GHz 10 10 15 15 dB dB 1. All measurements made in a 50 W system, unless otherwise specified. 2. Insertion loss changes by 0.003 dB/°C. 3. Insertion loss state. BUY NOW Innovation to GoTM Now available for purchase online. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 200189 Rev. C • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • December 4, 2008 1 Data Sheet • AS200-313LF Operating Characteristics at 25 °C (0, 3 V) Parameter Condition Frequency Min.Typ. Max. Unit Switching characteristics Rise, fall On, off Video feedthru 10/90% or 90/10% RF 50% CTL to 90/10% RF TRISE = 1 ns, BW = 500 MHz 20 50 50 ns ns mV Input power for -0.1 dB compression VCTL = 0/3 V 5.2 GHz 33 dBm Harmonics H2, H3 Pin = 30 dBm 5.2 GHz -65 dBc Thermal resistance 25 °C/W Control voltages Vlow = 0 to 0.2 V @ 20 µA max. Vhigh = 2.5 V @ 100 µA max. to 5 V @ 200 µA max. 0 -20 -0.2 -22 -0.4 -24 -0.6 -26 Isolation (dB) Insertion Loss (dB) Typical Performance Data (0, 3 V) -0.8 -1.0 -1.2 -28 -30 -32 -1.4 -34 -1.6 -36 -1.8 -38 -40 -2.0 5.0 5.1 5.2 5.3 5.4 5.5 5.6 5.7 5.8 5.9 6.0 5.0 5.1 5.2 5.3 5.4 5.5 5.6 5.7 5.8 5.9 6.0 Frequency (GHz) Frequency (GHz) Insertion Loss vs. Frequency Isolation vs. Frequency -10 -11 Return Loss (dB) -12 -13 -14 -15 -16 -17 -18 -19 -20 5.0 5.1 5.2 5.3 5.4 5.5 5.6 5.7 5.8 5.9 6.0 Frequency (GHz) Return Loss vs. Frequency 2 Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com December 4, 2008 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • 200189 Rev. C Data Sheet • AS200-313LF Absolute Maximum Ratings Truth Table Value V1 V2 J1–J2 J1–J3 RF input power 6 W max. > 900 MHz 0/7 V control 0 Vhigh Isolation Insertion loss Vhigh 0 Insertion loss Isolation Control voltage -0.2 V, +7 V Operating temperature -40 °C to +85 °C Storage temperature -65 °C to +150 °C Characteristic Performance is guaranteed only under the conditions listed in the specifications table and is not guaranteed under the full range(s) described by the Absolute Maximum specifications. Exceeding any of the absolute maximum/minimum specifications may result in permanent damage to the device and will void the warranty. CAUTION: A lthough this device is designed to be as robust as possible, ESD (Electrostatic Discharge) can damage this device. This device must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD precautions must be employed at all times. All other conditions not recommended. Vhigh = 2.5 to 5 V. QFN-6 Pin 1 Indicator 2 0.7 ± 0.05 3 0.20 ± 0.05 4X 10° + 2° 4X 10° - 10° 0.125 Max. 0.125 Max. 0.17/0.30 0.025 ± 0.025 0.9 ± 0.1 10X (R0.127) 1.219 ± 0.1 Recommended Solder Reflow Profiles Refer to the “Recommended Solder Reflow Profile” Application Note. Tape and Reel Information Refer to the “Discrete Devices and IC Switch/Attenuators Tape and Reel Package Orientation” Application Note. (1.9) 0.61 ± 0.1 4X (R0.127) 0.95 6X 0.35 + 0.08 6X 0.35 - 0.02 Exposed Heat Sink Plug 0.61 ± 0.1 0.84 ± 0.1 0.29 + 0.16 0.29 - 0.09 6X 0.20 Min. Pin Out (Top View) J2 CBL GND J3 CBL 1 6 2 5 3 4 V1 CBL J1 V2 DC blocking capacitors (Cbl) must be supplied externally. Cbl = 15 pF. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 200189 Rev. C • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • December 4, 2008 3 Data Sheet • AS200-313LF Copyright © 2002, 2003, 2004, 2005, 2006, 2007, 2008, Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes. No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of Sale. THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury, death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters. Skyworks, the Skyworks symbol, “Breakthrough Simplicity” and “Innovation to Go” are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Thirdparty brands and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc. com, are incorporated by reference. 4 Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com December 4, 2008 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • 200189 Rev. C