ROHM BU34440

Optical disc ICs
Single-chip 4-bit microcontroller for
CD-DA
BU34440
The BU34440 is a single-chip 4-bit microcontroller designed for CD-DA and contains parallel I / O, serial I / O, timer / counter and all other functions required for CD control in a single compact package.
FApplications
Portable CD-DA devices, portable CD stereos
FPin assignments
FFeatures
1) Low-voltage, high-speed operation (VDD=2.3 X 5.5V
at 4.4MHz).
2) 4k byte ROM, 256 nibble RAM.
3) Internal 8-bit SIO (LSB first).
4) 14 programmable pull-up input / outputs.
5) 5 programmable pull-up inputs.
FAbsolute maximum ratings (Ta = 25_C)
FRecommended operating conditions (Ta = 25_C)
101
Optical disc ICs
Block diagram
102
BU34440
Optical disc ICs
BU34440
Pin descriptions
103
Optical disc ICs
Input / output circuits
104
BU34440
Optical disc ICs
BU34440
FElectrical characteristics (unless otherwise noted, Ta = 25_C, VDD = 5V)
105
Optical disc ICs
FElectrical characteristics (unless otherwise noted, Ta = 25_C, VDD = 3V)
106
BU34440
Optical disc ICs
Hardware descriptions
(1) Operates on a single power supply (VDD=2.3 X
5.5V).
(2) Memory size
ROM: 4096
8 bits
RAM: 256
4 bits
(3) Instruction execution time (1 cycle instruction)
1.5µsec: (at 4MHz)
(4) Subroutine nesting : 8 levels
(5) Interrupts: 4 factors
External: 2 factors
Internal (timer / counter, serial I / O)
: 2 factors
(6) ROM data table function (data table area : 4kB)
BU34440
(7) Two energy-saving modes (STOP / HALT)
(8) Internal 8-bit timer counter
(9) Internal serial I / O, simplifying interface with attached LSIs (LSB first)
(10) 14 programmable pull-up input / outputs
(11) 5 programmable pull-up inputs
External dimensions (Units: mm)
107