www.avx.com AVX SMD Power Inductors Version 14.7 Table of Contents LMax SMD Non-Shield Power Inductor LMXN Series – Non-Shielded Style B 2-3 Inductance Range: 0.47 - 470 μH Rated Current: 0.53 - 30 A LMXS Series – Shielded Style J LMXN Series – Non-Shielded Style C 4-7 Inductance Range: 0.47 - 1000 μH Rated Current: 0.10 - 40 A LMXN Series – Non-Shielded Style D 8-11 12-15 Inductance Range: 0.47 - 6,800 μH Rated Current: 0.017 - 4.70 A LMXS Series – Shielded Style C 16-19 Inductance Range: 0.36 - 2,500 μH Rated Current: 0.026 - 9.24 A LMXS Series – Shielded Style D 20-22 LMXS Series – Shielded Style F LMXS Series – Shielded Style G 36-37 LMXS Series – Shielded Style P 38-41 Inductance Range: 1.0 - 180 μH Rated Current: 0.22 - 3.50 A LMax SMD Miniature Power Inductor 42-49 Inductance Range: 0.12 – 10,000 μH Rated Current: 0.03 - 6.0 A LMax Low Profile Power Inductor 23-26 Inductance Range: 1.2 - 1,500 μH Rated Current: 0.13 - 8.20 A Inductance Range: 10 - 1,000 μH Rated Current: 0.16 - 1.84 A 34-35 Inductance Range: 1.0 - 100 μH Rated Current: 0.75 - 9.0 A LMMN Series – Miniature Style M Inductance Range: 1.0 - 10,000 μH Rated Current: 0.02 - 5.0 A 32-33 Inductance Range: 0.80 -330 μH Rated Current: 0.70 - 11.20 A LMXS Series – Shielded Style M LMax SMD Shielded Power Inductor 29-31 Inductance Range: 1.30 - 1,000 μH Rated Current: 0.40 - 10.50 A LMXS Series – Shielded Style L Inductance Range: 1.0 - 820 μH Rated Current: 0.24 - 3.30 A LMXS Series – Shielded Style B LMXS Series – Shielded Style H Inductance Range: 2.4 - 1,000 μH Rated Current: 0.40 - 8.0 A LMLP Series –Style C 50-57 Inductance Range: 0.8 - 220 μH Rated Current: 0.22 - 11.0 A 27-28 LMLP Series –Style D 58-64 Inductance Range: 0.10 - 47 μH Rated Current: 3.0 - 120 A NOTICE: Specifications are subject to change without notice. Contact your nearest AVX Sales Office for the latest specifications. All statements, information and data given herein are believed to be accurate and reliable, but are presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements or suggestions concerning possible use of our products are made without representation or warranty that any such use is free of patent infringement and are not recommendations to infringe any patent. The user should not assume that all safety measures are indicated or that other measures may not be required. Specifications are typical and may not apply to all applications. 1 LMax SMD Power Inductor LMXN Series – Non-Shielded Style B FEATURES CHARACTERISTICS • Miniature surface mount design • High power, High saturation inductors • Very low resistance • Maximum power density • Ideal inductors for DC–DC converters • Available on tape and reel for auto surface mounting • Saturation Rated Current:The current when the inductance becomes 30% lower than its initial value. (Ta=25°C) • Operating temperature range: -40 ~ 85°C INDUCTANCE AND RATED CURRENT RANGES • 0705 0.47μH ~ 22.0μH 7.7 ~ 0.70A • 0906 0.56μH ~ 100μH 7.7 ~ 0.53A • 1310 0.47μH ~ 100μH 11.4 ~ 0.95A • 1913 0.47μH ~ 100μH 25.1 ~ 1.80A • 2216 0.78μH ~ 470μH 30.0 ~ 0.8A • Electrical specifications at 25°C APPLICATIONS • Notebook Computers • Handheld Communications • LCD Televisions • Power Supply For VTRs • DC/DC Converters, etc. DIMENSIONS A I J I C 100 4R7 E B PAD LAYOUT D H mm (inches) Type 0705 0906 1310 1913 2216 A max. 7.50 (0.295) 8.89 (0.350) 13.20 (0.560) 19.40 (0.764) 22.35 (0.880) B max. 5.20 (0.205) 6.40 (0.252) 9.90 (0.390) 13.30 (0.524) 16.26 (0.604) C max. 3.20 (0.126) 5.00 (0.197) 6.35 (0.250) 6.80 (0.268) 8.00 (0.315) D 4.60 (0.181) 5.84 (0.230) 9.50 (0.374) 12.7 (0.500) 16.0 (0.630) E 2.50 (0.098) 2.60 (0.103) 4.50 (0.177) 6.60 (0.260) 8.00 (0.315) H 4.00 (0.157) 4.06 (0.160) 6.50 (0.256) 8.00 (0.315) 8.64 (0.340) I 2.00 (0.079) 2.00 (0.079) 2.30 (0.091) 3.80 (0.150) 4.30 (0.169) J 4.00 (0.157) 5.08 (0.200) 9.00 (0.344) 11.7 (0.460) 14.35 (0.565) HOW TO ORDER LM XN 0705 M R04 B T A S Family LM = Power Inductor Series XN = Non-Shielded Size 0705 = 7x5xh (h = see catalog) Tolerance M = ±20% P = +40% –20% Inductance R04 = 0.039μH R39 = 0.390μH 3R9 = 3.900μH 390 = 39.00μH 391 = 390.0μH 392 = 3900μH Style Termination T = Sn Plate Special A = Standard Packaging S = 13" Reel 2 LMax SMD Power Inductor LMXN Series – Non-Shielded Style B ELECTRICAL CHARACTERISTICS 0705/0906/1310/1913/2216 Codes L (μH) 705 R47 R56 R78 1R0 1R5 2R2 3R3 3R9 4R7 6R0 6R8 7R8 100 150 220 330 470 680 101 221 331 471 0.47 0.56 0.78 1.0 1.5 2.2 3.3 3.9 4.7 6.0 6.8 7.8 10 15 22 33 47 68 100 220 330 470 P – – M M M M – M – M – M M M – – – – – – – Tolerance 0906 1310 2216 1913 – P M – M – – P M P M M M M M – M M M – M M M – M M M M M M M M M M M M M M M – M – M – Test Condition 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 0.1V 0.1V 0.1V 0.1V 0.1V 0.1V 0.1V 0.1V 0.1V 0.1V 0.1V 0.1V 0.1V 0.1V 0.1V 0.1V 0.1V 0.1V 0.1V 0.1V 0.1V 0.1V DCR (Ω) max. I sat (A) max* 0705 0906 1310 1913 2216 0705 0906 1310 1913 2216 0.025 – – 0.050 0.050 0.070 0.080 – 0.090 – 0.130 – 0.160 0.230 0.370 – – – – – – – – 0.010 – – – 0.035 0.040 – 0.054 – 0.08 – 0.111 0.170 0.250 0.350 0.470 0.730 1.110 – – – 0.005 – – 0.006 0.008 0.011 0.014 – 0.018 – 0.027 – 0.038 0.045 0.070 0.100 0.150 0.220 0.280 – – – 0.003 – – 0.004 0.006 0.008 0.009 – 0.012 – 0.019 – 0.027 0.032 0.050 0.069 0.109 0.156 0.206 – – – – – 0.003 – 0.004 0.006 0.009 0.010 0.014 0.017 – 0.018 0.026 0.032 0.043 0.066 0.096 0.115 0.165 0.396 0.588 0.950 7.7 – – 2.9 2.6 2.3 2 – 1.5 – 1.2 – 1.1 0.9 0.7 – – – – – – – – 7.7 – – – 3.5 3 – 2.6 – 2.2 – 1.9 1.5 1.2 0.99 0.87 0.68 0.53 – – – 11.4 – – 9.9 7.9 6.1 5.1 – 4.2 – 3.6 – 3.3 2.4 2 1.7 1.4 1.2 0.95 – – – 25.1 – – 15.3 12 10.2 9.3 – 7.7 – 6.2 – 5.2 4.3 3.7 3 2.4 2 1.8 – – – – – 30 – 25 20 17 15 13 12 – 11 10 8 7 6 5 4 3 2.4 1 0.8 *Saturation Current:The current when the inductance becomes 30% lower than its initial value. (Ta=25°C) 3 LMax SMD Power Inductor LMXN Series – Non-Shielded Style C FEATURES CHARACTERISTICS • High power, High saturation inductors • Ideal inductors for DC-DC converters in notebook computers, PDAs, Step-up or step-down converters, flash memory programmers, etc. • 0705 has ceramic base with gold-plating • Others have LCP plastic base • Saturation Rated Current: The current when the inductance becomes 10% lower than its initial value. (Ta=25°C) • Operating temperature range: -40 ~ 125°C APPLICATIONS • 0705 1.0μH ~ 1000μH 2.9 ~ 0.10A • 1309 4.7μH ~ 1000μH 4.2 ~ 0.29A • 13E9 1.0μH ~ 1000μH 9.0 ~ 0.30A • 13L9 0.47μH ~ 1000μH 40 ~ 0.8A • 1915 1.0μH ~ 1000μH 20 ~ 1.0A • Electrical specifications at 25°C • Portable Telephones • Personal Computers • DC/DC Converters • Various Electronic Appliances INDUCTANCE AND RATED CURRENT RANGES DIMENSIONS A 4R7 C B EPOXY D E J F I H mm (inches) Type 0705 1309 13E9 13L9 1915 4 A max. 6.60 (0.260) 12.95 (0.510) 12.95 (0.510) 12.95 (0.510) 18.54 (0.730) B max. 4.45 (0.175) 9.40 (0.370) 9.40 (0.370) 9.40 (0.370) 15.24 (0.600) C max. 2.92 (0.115) 3.00 (0.118) 5.21 (0.205) 11.43 (0.450) 7.11 (0.280) D 4.32 (0.170) 7.62 (0.300) 7.62 (0.300) 7.62 (0.300) 12.7 (0.500) E 1.27 (0.050) 2.54 (0.100) 2.54 (0.100) 2.54 (0.100) 2.54 (0.100) F 1.02 (0.040) 2.54 (0.100) 2.54 (0.100) 2.54 (0.100) 2.54 (0.100) H 3.56 (0.140) 2.79 (0.110) 2.79 (0.110) 2.79 (0.110) 2.79 (0.110) I 1.40 (0.055) 2.92 (0.115) 2.92 (0.115) 2.92 (0.115) 2.92 (0.115) J 4.06 (0.160) 7.37 (0.290) 7.37 (0.290) 7.37 (0.290) 12.45 (0.490) LMax SMD Power Inductor LMXN Series – Non-Shielded Style C HOW TO ORDER LM XN 1309 M R04 C T A S Family LM = Power Inductor Series XN = Non-shielded Size 1309 = 13x9xh 13E9 = 13x9xE(h) (h = see catalog) Tolerance M = ±20% N = ±30% Inductance R04 = 0.039μH R39 = 0.390μH 3R9 = 3.900μH 390 = 39.00μH 391 = 390.0μH 392 = 3900μH Style Termination T = Sn Plate Special A = Standard Packaging S = 13" Reel ELECTRICAL CHARACTERISTICS 0705 Codes 1R0 1R5 2R2 3R3 4R7 6R8 8R2 100 150 220 330 470 680 101 151 221 331 471 681 102 L (μH) 1.0 1.5 2.2 3.3 4.7 6.8 8.2 10 15 22 33 47 68 100 150 220 330 470 680 1000 Tolerance M M M M M M M M M M M M M M M M M M M M Test Condition 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V DCR (Ω) max. 0.05 0.06 0.07 0.08 0.09 0.13 0.16 0.16 0.23 0.37 0.51 0.64 0.86 1.27 2.00 3.11 3.80 5.06 9.20 13.8 I sat (A) max* 2.90 2.60 2.30 2.00 1.50 1.20 1.15 1.10 0.90 0.70 0.58 0.50 0.40 0.31 0.27 0.22 0.18 0.16 0.14 0.10 L (μH) 4.7 6.8 10 15 22 33 47 68 100 150 220 330 470 680 1000 Tolerance M M M M M M M M M M M M M M M Test Condition 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V DCR (Ω) max. 0.036 0.060 0.085 0.12 0.18 0.25 0.32 0.54 0.69 0.94 1.60 2.15 3.30 4.40 7.00 I sat (A) max* 4.20 3.90 2.70 2.30 1.80 1.60 1.30 1.10 0.87 0.74 0.56 0.50 0.40 0.33 0.29 1309 Codes 4R7 6R8 100 150 220 330 470 680 101 151 221 331 471 681 102 *Saturation Current: The current when the inductance becomes 10% lower than its initial value. (Ta=25°C) 5 LMax SMD Power Inductor LMXN Series – Non-Shielded Style C 13E9 Codes 1R0 1R5 2R2 3R3 4R7 6R8 100 150 220 330 470 680 101 151 221 331 471 681 102 L (μH) 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 68 100 150 220 330 470 680 1000 Tolerance M M M M M M M M M M M M M M M M M M M Test Condition 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V DCR (Ω) max. 0.009 0.010 0.012 0.015 0.018 0.027 0.038 0.046 0.085 0.100 0.140 0.200 0.280 0.400 0.610 1.020 1.270 2.020 3.000 I sat (A) max* 9.00 8.00 7.00 6.40 5.40 4.60 3.80 3.00 2.60 2.00 1.60 1.40 1.20 1.00 0.80 0.60 0.50 0.40 0.30 L (μH) 0.47 0.82 1.2 1.5 2.2 3.5 4.7 5.6 6.8 8.2 10 15 22 33 47 68 100 150 220 330 470 680 1000 Tolerance N N N N N N N N N N M M M M M M M M M M M M M Test Condition 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V DCR (Ω) max. 0.008 0.009 0.010 0.010 0.012 0.015 0.020 0.022 0.030 0.033 0.040 0.050 0.066 0.080 0.11 0.17 0.22 0.34 0.44 0.70 0.95 1.20 2.00 I sat (A) max* 40.0 34.7 28.4 25.7 23.0 21.0 18.0 16.0 15.0 10.0 8.00 7.00 5.50 4.00 3.80 3.00 2.50 2.00 1.60 1.20 1.00 1.00 0.80 13L9 Codes R47 R82 1R2 1R5 2R2 3R5 4R7 5R6 6R8 8R2 100 150 220 330 470 680 101 151 221 331 471 681 102 *Saturation Current: The current when the inductance becomes 10% lower than its initial value. (Ta=25°C) 6 LMax SMD Power Inductor Non-Shielded Style C 1915 Codes 1R0 2R2 3R3 5R6 100 150 220 330 470 680 101 151 221 331 471 681 102 L (μH) 1.0 2.2 3.3 5.6 10 15 22 33 47 68 100 150 220 330 470 680 1000 Tolerance M M M M M M M M M M M M M M M M M Test Condition 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V DCR (Ω) max. 0.009 0.014 0.018 0.020 0.031 0.036 0.047 0.066 0.095 0.130 0.190 0.250 0.380 0.560 0.850 1.100 1.800 I sat (A) max* 20 16 14 12 10 8.0 7.0 5.5 4.5 3.5 3.0 2.6 2.4 1.9 1.4 1.2 1.0 *Saturation Current: The current when the inductance becomes 10% lower than its initial value. (Ta=25°C) 7 LMax SMD Power Inductor LMXN Series – Non-Shielded Style D FEATURES CHARACTERISTICS • Open Magnetic Circuit Construction • Small Surface Area • Rated Current (IDC): The DC current that will cause an approximate ΔT of 40°C. (Ta=25°C) • Operating temperature range: -40°C ~ +125°C APPLICATIONS INDUCTANCE AND RATED CURRENT RANGES • LCD Televisions • Notebooks • Portable Communication • DC/DC Converters, etc. • 0504 1.0μH ~ 33 μH 3.30 ~ 0.56A • 0605 10.0μH ~ 220 μH 1.44 ~ 0.35A • 0808 10.0μH ~ 330 μH 1.44 ~ 0.28A • 08G8 10.0μH ~ 470 μH 2.30 ~ 0.34A • 1009 10.0μH ~ 560 μH 2.38 ~ 0.32A • 10F9 10.0μH ~ 820 μH 2.6 ~ 0.24A • Electrical specifications at 25°C DIMENSIONS SILVER G F Land A D C E R1.0 Part of Silk Scrren B mm (inches) Type 0504 0605 0808 08G8 1009 10F9 A 4.50 ± 0.30 (0.177 ± .012) 5.80 ± 0.30 (0.228 ± .012) 7.80 ± 0.30 (0.307 ± .012) 7.80 ± 0.30 (0.307 ± .012) 10.0 ± 0.30 (0.394 ± .012) 10.0 ± 0.40 (0.394 ± .016) 4.00 (0.158 5.20 (0.205 7.30 (0.276 7.30 (0.287 9.00 (0.354 9.00 (0.354 HOW TO ORDER LM XN Family LM = Power Inductor 8 Series XN = Non-shielded B ± 0.30 ± 0.012) ± 0.30 ± 0.012) ± 0.30 ± 0.012) ± 0.30 ± 0.012) ± 0.30 ± 0.012) ± 0.40 ± 0.016) 3.20 (0.126 4.50 (0.177 3.50 (0.140 5.08 (0.200 4.00 (0.158 5.40 (0.213 C ± 0.30 ± 0.012) ± 0.35 ± 0.014) ± 0.50 ± 0.020) ± 0.50 ± 0.020) ± 0.50 ± 0.020) ± 0.40 ± 0.016) D 5.00 (0.197) 6.00 (0.236) 8.00 (0.315) 8.00 (0.315) 10.0 (0.394) 10.0 (0.394) E 1.50 (0.059) 1.70 (0.067) 2.00 (0.079) 2.00 (0.079) 2.50 (0.098) 2.50 (0.098) F 1.75 (0.069) 2.15 (0.085) 3.00 (0.118) 3.00 (0.118) 3.75 (0.148) 3.75 (0.148) G 4.50 (0.177) 5.50 (0.217) 7.50 (0.295) 7.50 (0.295) 9.50 (0.374) 9.50 (0.374) 1009 M R04 D T A S Size 1009 = 10x9xh 10F9 = 10x9xF(h) (h = see catalog) Tolerance M = ±20% Inductance 1R0 = 1.00μH 390 = 39.00μH 391 = 390.0μH Style Termination T = Sn Plate Special A = Standard Packaging S = 13" Reel LMax SMD Power Inductor LMXN Series – Non-Shielded Style D ELECTRICAL CHARACTERISTICS 0504 Codes 1R0 1R4 1R8 2R2 2R7 3R3 3R9 4R7 5R6 6R8 8R2 100 120 150 180 220 270 330 L (μH) 1.0 1.4 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 Tolerance M M M M M M M M M M M M M M M M M M Test Condition 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V DCR (Ω) max. 0.048 0.056 0.063 0.071 0.078 0.086 0.093 0.108 0.125 0.131 0.146 0.182 0.210 0.235 0.338 0.378 0.522 0.540 IDC (A) max. 3.30 2.80 2.45 2.21 2.00 1.81 1.66 1.51 1.40 1.26 1.14 1.04 0.97 0.85 0.74 0.68 0.62 0.56 L (μH) 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 Tolerance M M M M M M M M M M M M M M M M M Test Condition 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V DCR (Ω) max. 0.100 0.120 0.140 0.150 0.180 0.200 0.230 0.320 0.370 0.420 0.460 0.600 0.700 0.930 1.100 1.380 1.570 IDC (A) max. 1.44 1.40 1.30 1.23 1.11 0.97 0.88 0.80 0.72 0.68 0.61 0.58 0.52 0.48 0.40 0.38 0.35 0605 Codes 100 120 150 180 220 270 330 390 470 560 680 820 101 121 151 181 221 9 LMax SMD Power Inductor LMXN Series – Non-Shielded Style D 0808 Codes 100 120 150 180 220 270 330 390 470 560 680 820 101 121 151 181 221 271 331 L (μH) 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 Tolerance M M M M M M M M M M M M M M M M M M M Test Condition 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V DCR (Ω) max. 1.44 1.39 1.24 1.12 1.07 0.94 0.85 0.74 0.68 0.64 0.59 0.54 0.51 0.49 0.40 0.36 0.31 0.29 0.28 IDC (A) max. 0.081 0.089 0.104 0.111 0.129 0.153 0.170 0.217 0.252 0.282 0.332 0.406 0.481 0.536 0.755 1.022 1.200 1.306 1.495 L (μH) 10 12 15 18 22 27 33 47 56 68 82 100 120 150 220 330 390 470 Tolerance M M M M M M M M M M M M M M M M M M Test Condition 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V DCR (Ω) max. 0.070 0.080 0.090 0.100 0.110 0.120 0.130 0.180 0.240 0.280 0.370 0.430 0.470 0.640 0.960 1.260 1.770 1.960 IDC (A) max. 2.30 2.00 1.80 1.60 1.50 1.30 1.20 1.00 0.94 0.85 0.78 0.72 0.66 0.58 0.49 0.40 0.36 0.34 08G8 Codes 100 120 150 180 220 270 330 470 560 680 820 101 121 151 221 331 391 471 10 LMax SMD Power Inductor LMXN Series – Non-Shielded Style D 1009 Codes 100 120 150 180 220 330 470 560 680 820 101 121 181 221 331 471 561 L (μH) 10 12 15 18 22 33 47 56 68 82 100 120 180 220 330 470 560 Tolerance M M M M M M M M M M M M M M M M M Test Condition 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V DCR (Ω) max. 0.053 0.061 0.070 0.081 0.088 0.120 0.170 0.199 0.223 0.252 0.344 0.396 0.621 0.721 1.100 1.526 1.904 IDC (A) max. 2.38 2.13 1.87 1.73 1.60 1.26 1.10 1.01 0.91 0.85 0.74 0.69 0.56 0.53 0.42 0.35 0.32 L (μH) 10 12 15 22 33 39 47 56 68 82 100 120 150 220 270 330 470 560 820 Tolerance M M M M M M M M M M M M M M M M M M M Test Condition 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V DCR (Ω) max. 0.060 0.070 0.080 0.100 0.120 0.140 0.170 0.190 0.220 0.250 0.350 0.400 0.470 0.730 0.970 1.150 1.480 1.900 2.550 IDC (A) max. 2.60 2.45 2.27 1.95 1.50 1.37 1.28 1.17 1.11 1.00 0.97 0.89 0.78 0.66 0.57 0.52 0.42 0.33 0.24 10F9 Codes 100 120 150 220 330 390 470 560 680 820 101 121 151 221 271 331 471 561 821 11 LMax SMD Power Inductor LMXS Series – Shielded Style B FEATURES CHARACTERISTICS • Directly connected electrode on ferrite core • Excellent property with high saturation for surface mounting • Rated DC Current: The current when the inductance becomes 30% lower than its initial value. • Operating temperature: -40 ~ 85°C APPLICATIONS INDUCTANCE AND RATED CURRENT RANGES • OA Equipment • Notebook PCs • LCD Monitor • Portable Terminal Equipment • DC/DC Converters, etc. • Power Supply for VTR • 04B4 0.47 ~ 2200μH 1.84 ~ 0.035A • 04C4 1.0 ~ 6800μH 1.90 ~ 0.017A • 04A4 1.0 ~ 100μH 1.50 ~ 0.100A • 0505 0.47 ~ 820μH 2.33 ~ 0.030A • 05C5 0.47 ~ 2500μH 4.82 ~ 0.045A • 0606 1.0 ~ 3300μH 4.70 ~ 0.026A • Electrical specifications at 25°C DIMENSIONS C A E G J D K H B mm (inches) Type 04B4 04C4 04A4 0505 05C5 0606 A 3.85 ± 0.30 (0.152 ± 0.012) 3.85 ± 0.30 (0.152 ± 0.012) 3.85 ± 0.30 (0.152 ± 0.012) 5.30 max. (0.207 max.) 5.30 max. (0.207 max.) 5.90 ± 0.20 (0.232 ± 0.008) B 3.85 ± 0.30 (0.152 ± 0.012) 3.85 ± 0.30 (0.152 ± 0.012) 3.85 ± 0.30 (0.152 ± 0.012) 5.30 max. (0.207 max.) 5.30 max. (0.207 max.) 5.90 ± 0.20 (0.232 ± 0.008) C max. 2.00 (0.079) 3.00 (0.118) 1.50 (0.059) 2.00 (0.079) 3.00 (0.118) 3.00 (0.118) D 3.9 ± 0.20 (0.154 ± 0.008) 3.9 ± 0.20 (0.154 ± 0.008) 4.80 max. (0.189 max.) 5.7 ± 0.40 (0.224 ± 0.016) 5.7 ± 0.40 (0.224 ± 0.016) 6.4 ± 0.30 (0.252 ± 0.012) E 1.60 (0.063) 1.60 (0.063) 1.60 (0.063) 1.60 (0.063) 1.60 (0.063) 2.40 (0.094) G 3.20 (0.126) 3.20 (0.126) 3.00 (0.118) 4.20 (0.165) 4.20 (0.165) 4.70 (0.185) H 1.90 (0.075) 1.90 (0.075) 2.00 (0.079) 1.90 (0.075) 1.90 (0.075) 2.70 (0.106) K 3.00 (0.118) 3.00 (0.118) 2.60 (0.102) 3.90 (0.154) 3.90 (0.154) 4.40 (0.173) J 4.55 (0.179) 4.55 (0.179) 5.20 (0.205) 5.70 (0.224) 5.70 (0.224) 6.50 (0.256) HOW TO ORDER LM XS 0505 M R04 B T A S Family LM = Power Inductor Series XS = Shielded Size 0505 = 5x5xh 05A5 = 5x5xA(h) (h = see catalog) Tolerance M = ±20% N = ±30% P = ±40% Inductance R04 = 0.039μH R39 = 0.390μH 3R9 = 3.900μH 390 = 39.00μH 391 = 390.0μH 392 = 3900μH Style Termination T = Sn Plate Special A = Standard Packaging S = 13" Reel 12 12 LMax SMD Power Inductor LMXS Series – Shielded Style B ELECTRICAL CHARACTERISTICS 04B4/04C4 Codes R47 1R0 1R2 1R5 1R8 2R0 2R2 2R4 2R5 2R7 3R3 3R5 3R9 4R7 5R6 6R2 6R8 8R2 100 120 150 180 220 270 330 390 470 500 560 680 820 101 121 151 181 221 271 331 391 471 561 681 821 102 122 152 L (μH) 0.47 1.0 1.2 1.5 1.8 2.0 2.2 2.4 2.5 2.7 3.3 3.5 3.9 4.7 5.6 6.2 6.8 8.2 10 12 15 18 22 27 33 39 47 50 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 1000 1200 1500 Tolerance N N N N N N N N N N N N N N N N N N M M M M M M M M M M M M M M M M M M M M M M M M M M M M Test Condition 100 KHz, 0.25V 100 KHz, 0.25V 100 KHz, 0.25V 100 KHz, 0.25V 100 KHz, 0.25V 100 KHz, 0.25V 100 KHz, 0.25V 100 KHz, 0.25V 100 KHz, 0.25V 100 KHz, 0.25V 100 KHz, 0.25V 100 KHz, 0.25V 100 KHz, 0.25V 100 KHz, 0.25V 100 KHz, 0.25V 100 KHz, 0.25V 100 KHz, 0.25V 100 KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V DCR (Ω) max. 04B4 04C4 0.017 – 0.030 0.009 0.043 0.010 0.052 0.013 0.056 – 0.057 0.016 0.058 0.025 0.059 – 0.059 0.018 0.060 0.020 0.064 0.030 0.127 0.025 – 0.033 0.146 0.039 0.176 0.044 0.220 – 0.238 0.051 0.272 0.065 0.299 0.092 – 0.100 0.472 0.113 0.552 0.125 0.592 0.146 0.630 0.176 1.075 0.214 1.269 0.225 1.309 0.304 – – 1.960 0.324 2.613 0.472 2.950 0.539 3.255 0.608 3.350 0.757 3.550 0.882 4.000 1.130 4.900 1.269 – 1.570 7.280 1.930 – 2.360 – 2.770 – 3.520 13.37 4.250 – 4.830 19.55 6.260 – 7.860 36.15 9.980 I sat (A) max* 04B4 04C4 1.84 – 1.80 1.90 1.70 1.75 1.60 1.45 1.55 – 1.51 1.25 1.50 1.15 1.41 – 1.40 1.05 1.35 1.00 1.30 0.96 1.30 0.95 – 0.87 1.10 0.78 0.95 0.74 0.91 – 0.90 0.68 0.80 0.57 0.70 0.43 – 0.38 0.61 0.33 0.58 0.30 0.52 0.28 0.44 0.26 0.43 0.23 0.37 0.21 0.34 0.19 – – 0.29 0.170 0.25 0.156 0.20 0.142 0.19 0.128 0.15 0.116 0.12 0.106 0.10 0.095 0.09 0.087 – 0.080 0.08 0.078 – 0.073 – 0.068 – 0.065 0.07 0.056 – 0.050 0.065 0.047 – 0.043 0.038 0.039 *Saturation Current: The current when the inductance becomes 30% lower than its initial value. 13 LMax SMD Power Inductor LMXS Series – Shielded Style B 04A4 Codes 1R0 1R2 2R2 3R3 3R9 4R7 5R6 6R8 8R2 100 150 220 330 470 680 101 L (μH) 1.0 1.2 2.2 3.3 3.9 4.7 5.6 6.8 8.2 10 15 22 33 47 68 100 Tolerance N N N N N N N N N N N M M M M M Test Condition 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V *Saturation Current: The current when the inductance becomes 30% lower than its initial value. 14 DCR (Ω) max. 0.058 0.070 0.082 0.105 0.120 0.150 0.180 0.220 0.240 0.255 0.390 0.610 0.920 1.130 1.520 2.120 I sat (A) max* 1.50 1.40 1.00 0.92 0.80 0.76 0.69 0.62 0.56 0.50 0.40 0.32 0.28 0.20 0.15 0.10 LMax SMD Power Inductor LMXS Series – Shielded Style B 0505/05C5/0606 Codes R47 1R0 1R1 1R2 1R5 1R8 2R0 2R2 2R4 2R7 3R3 3R9 4R1 4R7 5R6 6R8 8R2 100 120 150 180 220 270 330 390 470 560 680 820 101 121 151 181 221 271 331 391 471 561 681 821 102 122 152 182 222 252 272 332 L (μH) 0.47 1.0 1.1 1.2 1.5 1.8 2.0 2.2 2.4 2.7 3.3 3.9 4.1 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 1000 1200 1522 1800 2200 2500 2700 3300 Tolerance N N N N N N N N N N N N N N N N N M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M Test Condition 100KHz, 0.25V 100KHz, 0.25V 100KHz, 0.25V 100KHz, 0.25V 100KHz, 0.25V 100KHz, 0.25V 100KHz, 0.25V 100KHz, 0.25V 100KHz, 0.25V 100KHz, 0.25V 100KHz, 0.25V 100KHz, 0.25V 100KHz, 0.25V 100KHz, 0.25V 100KHz, 0.25V 100KHz, 0.25V 100KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 0505 0.015 0.024 – 0.044 – – 0.046 0.059 0.062 – 0.073 0.081 0.087 – – 0.105 0.139 0.150 – 0.210 – 0.275 0.452 0.455 – 0.730 – 0.935 1.300 1.500 1.910 2.680 3.040 3.520 4.380 5.560 – 7.820 – – 15.00 – – – – – – – – DCR (Ω) max. 05C5 0.010 0.015 0.020 0.022 – – 0.027 0.029 0.034 – 0.040 – 0.045 0.052 – 0.068 0.084 0.090 0.120 0.142 0.192 0.208 0.222 0.257 0.320 0.352 0.459 0.525 0.770 0.801 0.850 1.100 1.190 1.530 – 2.030 3.000 3.500 4.080 – – – 8.500 10.00 13.15 19.00 20.00 – – 0606 – 0.014 – 0.016 0.018 0.019 0.022 0.022 0.024 0.027 0.030 0.034 – 0.042 0.048 0.054 0.058 0.065 0.082 0.096 0.110 0.140 0.170 0.210 0.240 0.280 0.340 0.410 0.490 0.550 0.700 0.780 0.960 1.080 1.360 1.820 2.050 2.580 3.160 4.040 4.900 6.000 7.600 9.440 11.70 13.40 – 17.30 22.10 0505 2.33 2.27 – 2.15 – – 1.90 1.63 1.50 – 1.34 1.20 1.14 – – 0.95 0.90 0.76 – 0.63 – 0.56 0.48 0.44 – 0.35 – 0.30 0.27 0.23 0.22 0.21 0.20 0.195 0.193 0.190 – 0.180 – – 0.120 – – – – – – – – I sat (A) max* 05C5 4.82 4.00 3.87 3.80 – – 2.92 2.41 2.36 – 1.95 – 1.87 1.60 – 1.51 1.38 1.33 1.06 1.05 0.90 0.86 0.75 0.72 0.64 0.62 0.53 0.51 0.48 0.43 0.34 0.26 0.24 0.20 – 0.19 0.16 0.15 0.14 – – – 0.070 0.065 0.062 0.050 0.045 0606 – 4.70 – 3.90 3.52 3.25 2.95 2.95 2.75 2.55 2.45 2.35 – 2.25 2.05 1.85 1.65 1.45 1.35 1.25 1.15 0.98 0.90 0.80 0.72 0.70 0.66 0.58 0.52 0.46 0.42 0.36 0.34 0.32 0.28 0.24 0.22 0.20 0.18 0.16 0.14 0.13 0.12 0.10 0.098 0.095 – 0.086 0.078 *Saturation Current: The current when the inductance becomes 30% lower than its initial value. 15 LMax SMD Power Inductor LMXS Series – Shielded Style C FEATURES INDUCTANCE AND RATED CURRENT RANGES • Directly connected electrode on ferrite core • Available in magnetically shielded • Low DC resistance • Suitable for large current • Available on tape and reel for auto surface mounting • 0404 1.0 ~ 180μH 1.60 ~ 0.110A • 04B4 0.47 ~ 1800μH 1.84 ~ 0.036A • 04C4 1.5 ~ 560μH 1.90 ~ 0.090A • 0505 1.2 ~ 1000μH 1.77 ~ 0.067A • 05B5 1.0 ~ 820μH 2.70 ~ 0.026A • 05C5 1.0 ~ 2500μH 4.00 ~ 0.045A • 0707 1.0 ~ 820μH 3.28 ~ 0.100A • 07B7 1.0 ~ 1500μH 3.52 ~ 0.095A • 07D7 0.36 ~ 1000μH 9.24 ~ 0.180A • Electrical specifications at 25°C APPLICATIONS • Power Supply For VTRs • OA Equipment. • Notebook PCs • Portable Communication Equipment • DC/DC Converters, etc. CHARACTERISTICS • Rated Current: 0404/04B4/0505/05B5/05C5/0707/07B7/07D7: The DC current when the inductance becomes 30% lower than its initial value. 04C4/101B/101D/101H: The DC current when the inductance becomes 35% lowers than its initial value. (Ta=25°C) • Operating temperature range: -40 ~ +105°C DIMENSIONS A C B H PCB Pattern D øC K J mm (inches) Type 0404 04B4 04C4 0505 05B5 05C5 0707 07B7 07D7 16 A 3.80 ± 0.30 (0.150 ± 0.012) 3.80 ± 0.30 (0.150 ± 0.012) 3.80 ± 0.30 (0.150 ± 0.012) 5.00 ± 0.30 (0.197 ± 0.012) 5.00 ± 0.30 (0.197 ± 0.012) 5.00 ± 0.30 (0.197 ± 0.012) 6.90 ± 0.30 (0.272 ± 0.012) 6.90 ± 0.30 (0.272 ± 0.012) 7.00 ± 0.40 (0.276 ± 0.016) B 3.80 ± 0.30 (0.150 ± 0.012) 3.80 ± 0.30 (0.150 ± 0.012) 3.80 ± 0.30 (0.150 ± 0.012) 5.00 ± 0.30 (0.197 ± 0.012) 5.00 ± 0.30 (0.197 ± 0.012) 5.00 ± 0.30 (0.197 ± 0.012) 6.90 ± 0.30 (0.272 ± 0.012) 6.90 ± 0.30 (0.272 ± 0.012) 7.00 ± 0.40 (0.276 ± 0.016) C max. 1.25 (0.049) 2.00 (0.079) 3.00 (0.118) 1.20 (0.047) 2.00 (0.079) 3.00 (0.118) 1.50 (0.059) 1.90 (0.075) 4.30 (0.169) D 1.20 (0.047) 1.20 (0.047) 1.20 (0.047) 2.00 (0.079) 2.00 (0.079) 2.00 (0.079) 2.50 (0.098) 2.50 (0.098) 1.80 (0.071) H 4.40 (0.173) 4.40 (0.173) 4.40 (0.173) 5.90 (0.232) 5.90 (0.232) 5.90 (0.232) 7.30 (0.287) 7.30 (0.287) 8.00 (0.315) J 4.40 (0.173) 4.40 (0.173) 4.40 (0.173) 5.90 (0.232) 5.90 (0.232) 5.90 (0.232) 7.30 (0.287) 7.30 (0.287) 8.00 (0.315) K 1.10 (0.043) 1.10 (0.043) 1.10 (0.043) 1.90 (0.075) 1.90 (0.075) 1.90 (0.075) 2.00 (0.079) 2.00 (0.079) 1.60 (0.063) øC 3.00 (0.118) 3.00 (0.118) 3.00 (0.118) 4.20 (0.165) 4.20 (0.165) 4.20 (0.165) 5.30 (0.209) 5.30 (0.209) 6.00 (0.236) LMax SMD Power Inductor LMXS Series – Shielded Style C HOW TO ORDER LM XS 0707 Family LM = Power Inductor Series XS = Shielded Size 0707 = 7x7xh 07D7 = 7x7xD(h) (h = see catalog) M R04 C T A S Tolerance M = ±20% N = ±30% Inductance R04 = 0.039μH R39 = 0.390μH 3R9 = 3.900μH 390 = 39.00μH 391 = 390.0μH 392 = 3900μH Style Termination T = Sn Plate Special A = Standard Packaging S = 13" Reel 04C4 – – – 0.015 0.018 0.020 0.022 – 0.028 0.032 – 0.035 0.037 0.043 0.045 0.046 – – 0.065 0.079 0.071 0.105 0.119 0.140 0.175 0.201 0.227 0.287 0.341 0.430 0.471 0.532 0.675 0.850 1.110 1.230 1.560 1.800 2.200 2.640 3.820 4.620 – – – – 0404 – 1.600 1.400 1.240 1.220 1.200 0.980 – – 0.890 0.850 – 0.780 – 0.710 – 0.620 – 0.570 – 0.520 0.470 0.430 0.380 0.350 0.320 0.290 0.280 0.250 0.220 0.200 0.180 0.160 0.140 0.130 0.120 0.110 – – – – – – – – – ELECTRICAL CHARACTERISTICS 0404/04B4/04C4 Codes R47 1R0 1R2 1R5 1R8 2R2 2R4 2R5 2R7 3R3 3R5 3R6 3R9 4R3 4R7 5R1 5R6 6R2 6R8 7R5 8R2 100 120 150 180 220 270 330 390 470 560 680 820 101 121 151 181 221 271 331 471 561 681 102 152 182 L (μH) 0.47 1.0 1.2 1.5 1.8 2.2 2.4 2.5 2.7 3.3 3.5 3.6 3.9 4.3 4.7 5.1 5.6 6.2 6.8 7.5 8.2 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 470 560 680 1000 1500 1800 Tolerance N M, N M, N M, N M, N M, N M, N M, N M, N M, N M, N M, N M, N M, N M, N M, N M, N M, N M, N M, N M, N M M M M M M M M M M M M M M M M M M M M M M M M M Test Condition 100KHz, 0.25V 100KHz, 0.25V 100KHz, 0.25V 100KHz, 0.25V 100KHz, 0.25V 100KHz, 0.25V 100KHz, 0.25V 100KHz, 0.25V 100KHz, 0.25V 100KHz, 0.25V 100KHz, 0.25V 100KHz, 0.25V 100KHz, 0.25V 100KHz, 0.25V 100KHz, 0.25V 100KHz, 0.25V 100KHz, 0.25V 100KHz, 0.25V 100KHz, 0.25V 100KHz, 0.25V 100KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 0404 – 0.060 0.065 0.077 0.093 0.125 0.139 – – 0.187 0.210 – 0.220 – 0.240 – 0.320 – 0.350 – 0.470 0.570 0.750 0.810 1.060 1.150 1.670 1.840 2.310 2.630 2.860 3.940 4.900 5.740 7.310 9.080 9.500 – – – – – – – – – DCR (Ω) max. 04B4 0.017 0.030 0.043 0.052 – 0.058 – 0.059 0.059 0.064 0.127 – 0.135 – 0.146 – 0.176 0.220 0.238 – 0.272 0.299 – 0.472 – 0.592 0.630 1.075 – 1.309 – 2.613 2.950 3.255 – 3.550 – 4.900 – 7.280 – – 13.370 19.550 36.150 57.620 I sat (A) max* 04B4 1.840 1.800 1.700 1.600 – 1.500 – 1.400 1.400 1.300 1.300 – 1.120 – 1.100 – 0.950 0.910 0.900 – 0.800 0.700 – 0.610 – 0.520 0.440 0.430 – 0.340 – 0.250 0.200 0.190 – 0.120 – 0.090 – 0.080 – – 0.070 0.065 0.038 0.036 04C4 – – – 1.900 1.760 1.670 1.650 – 1.450 1.440 – 1.430 1.320 1.000 0.970 0.940 – – 0.870 0.820 0.770 0.700 0.670 0.540 0.500 0.480 0.400 0.350 0.330 0.320 0.300 0.270 0.230 0.210 0.200 0.170 0.150 0.140 0.130 0.120 0.100 0.090 – – – – *Saturation Current (0404/04B4): The DC current when the inductance becomes 30% lower than its initial value. (Ta=25°C) *Saturation Current (04C4): The DC current when the inductance becomes 35% lowers than its initial value. (Ta=25°C) 17 LMax SMD Power Inductor LMXS Series – Shielded Style C 0505/05B5/05C5 Codes 1R0 1R1 1R2 1R5 2R0 2R2 3R3 3R5 4R1 4R7 5R6 6R2 6R8 8R2 100 120 150 180 220 270 330 390 470 560 680 820 101 121 151 181 221 271 331 391 471 561 681 821 102 122 152 182 222 252 L (μH) 1.0 1.1 1.2 1.5 2.0 2.2 3.3 3.5 4.1 4.7 5.6 6.2 6.8 8.2 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 1000 1200 1500 1800 2200 2500 Tolerance M, N M, N M, N M, N M, N M, N M, N M, N M, N M, N M, N M, N M, N M, N M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M Test Condition 100KHz, 0.25V 100KHz, 0.25V 100KHz, 0.25V 100KHz, 0.25V 100KHz, 0.25V 100KHz, 0.25V 100KHz, 0.25V 100KHz, 0.25V 100KHz, 0.25V 100KHz, 0.25V 100KHz, 0.25V 100KHz, 0.25V 100KHz, 0.25V 100KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 0505 – – 0.050 0.069 0.100 0.110 0.140 0.150 – 0.190 0.193 0.200 0.200 0.300 0.350 0.430 0.440 0.750 0.820 – 1.160 – 1.590 – 2.140 2.720 3.550 4.890 5.200 7.550 7.760 10.13 11.23 – 16.86 22.78 24.87 28.09 45.07 – – – – – DCR (Ω) max. 05B5 0.030 – 0.044 – 0.046 0.059 0.062 0.073 0.081 0.087 0.093 – 0.105 0.139 0.150 0.170 0.210 – 0.275 – 0.455 0.540 0.730 0.800 0.935 – 1.500 1.910 2.680 3.045 3.520 4.380 5.560 – 7.820 9.790 – 15.00 – – – – – – 05C5 0.015 0.020 0.022 – 0.027 0.029 0.034 – – 0.045 0.052 – 0.068 0.084 0.090 – 0.142 – 0.208 0.222 0.257 – 0.352 – 0.525 – 0.801 0.850 1.100 1.190 1.530 – 2.030 3.000 3.500 4.450 – – – 8.500 10.00 13.15 19.00 20.00 *Saturation Current (0505/05B5/05C5): The DC current when the inductance becomes 30% lower than its initial value. 18 0505 – – 1.770 1.710 1.440 1.400 1.140 1.100 – 0.950 0.900 0.840 0.800 0.750 0.660 0.620 0.590 0.570 0.560 – 0.430 – 0.340 – 0.290 0.250 0.220 0.200 0.190 0.170 0.150 0.145 0.140 – 0.098 0.097 0.085 0.077 0.067 – – – – – I sat (A) max* 05B5 2.700 – 2.150 – 1.900 1.630 1.500 1.340 1.200 1.140 1.000 – 0.950 0.900 0.760 0.660 0.630 – 0.560 – 0.440 0.380 0.350 0.320 0.300 – 0.230 0.220 0.210 0.200 0.195 0.193 0.190 – 0.180 0.170 – 0.120 – – – – – – 05C5 4.000 3.870 3.800 – 2.920 2.410 2.360 – – 1.870 1.600 – 1.510 1.380 1.330 – 1.050 – 0.860 0.750 0.720 – 0.620 – 0.510 – 0.430 0.340 0.260 0.240 0.200 – 0.190 0.160 0.150 0.140 – – – 0.070 0.065 0.062 0.050 0.045 LMax SMD Power Inductor LMXS Series – Shielded Style C 0707/07B7/07D7 Codes R36 R56 R80 1R0 1R2 1R5 1R8 2R0 2R2 2R5 2R7 3R0 3R3 3R9 4R3 4R7 5R6 6R8 8R2 100 120 150 180 220 270 330 390 470 560 680 820 101 121 151 181 221 271 331 391 471 561 681 821 102 122 152 L (μH) 0.36 0.56 0.80 1.0 1.2 1.5 1.8 2.0 2.2 2.5 2.7 3.0 3.3 3.9 4.3 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 1000 1200 1500 Tolerance N N N M, N M, N M, N M, N M, N M, N M, N M, N M, N M, N M, N M, N M, N M, N M, N M, N M M M M M M M M M M M M M M M M M M M M M M M M M M M Test Condition 100KHz, 0.25V 100KHz, 0.25V 100KHz, 0.25V 100KHz, 0.25V 100KHz, 0.25V 100KHz, 0.25V 100KHz, 0.25V 100KHz, 0.25V 100KHz, 0.25V 100KHz, 0.25V 100KHz, 0.25V 100KHz, 0.25V 100KHz, 0.25V 100KHz, 0.25V 100KHz, 0.25V 100KHz, 0.25V 100KHz, 0.25V 100KHz, 0.25V 100KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 1KHz, 0.25V 0707 – – – 0.050 – 0.067 – 0.085 – – 0.110 – 0.130 0.160 – 0.200 0.230 0.280 0.310 0.330 0.460 0.530 0.620 0.700 0.910 1.150 1.380 1.540 1.860 2.320 2.540 3.20 4.24 4.77 6.04 7.95 10.51 11.63 12.97 16.87 22.3 25.11 28.41 – – – DCR (Ω) max. 07B7 – – – 0.035 – – 0.052 – 0.071 – – 0.086 – 0.110 – 0.130 0.150 0.170 0.190 0.240 0.290 0.380 0.440 0.490 0.640 0.740 0.910 1.020 1.260 1.570 1.890 2.12 2.55 3.37 3.73 4.54 5.97 7.74 9.92 12.95 14.36 18.52 20.23 28.25 31.85 36.72 07D7 0.005 0.006 0.009 0.040 0.040 0.040 0.040 – 0.0410 0.0410 – – 0.0410 – 0.041 0.042 0.043 0.044 – 0.049 0.058 0.081 0.091 0.110 0.150 0.170 0.230 0.260 0.350 0.380 0.430 0.61 0.66 0.88 0.98 1.17 1.64 1.86 2.85 3.01 3.62 4.63 5.20 6.00 – – 0707 – – – 3.280 – 2.530 – 2.060 – – 1.870 – 1.580 1.460 – 1.300 1.220 1.160 1.130 1.030 0.870 0.800 0.730 0.710 0.650 0.570 0.500 0.480 0.450 0.410 0.370 0.32 0.29 0.27 0.24 0.22 0.19 0.18 0.16 0.15 0.13 0.12 0.10 – – – I sat (A) max* 07B7 – – – 3.520 – – 3.050 – 2.500 – – 2.150 – 2.010 – 1.950 1.820 1.670 1.520 1.390 1.220 1.090 1.030 0.950 0.840 0.800 0.750 0.690 0.630 0.560 0.510 0.47 0.42 0.37 0.32 0.29 0.25 0.23 0.21 0.18 0.16 0.14 0.13 0.11 0.10 0.095 07D7 9.240 8.500 5.800 2.100 2.100 2.100 2.090 – 2.080 2.080 – – 2.070 – 2.060 2.050 2.040 2.040 – 2.000 1.900 1.600 1.480 1.320 1.260 1.100 1.050 1.000 0.850 0.780 0.740 0.70 0.60 0.52 0.46 0.40 0.36 0.32 0.28 0.26 0.24 0.22 0.20 0.18 – – *Saturation Current (0707/07B7/07D7): The DC current when the inductance becomes 30% lower than its initial value. 19 LMax SMD Power Inductor LMXS Series – Shielded Style D FEATURES CHARACTERISTICS • Magnetically shielded against radiation • 0704 can help achieve longer battery life significantly in handheld communication devices. • 1309 / 1915 designed for the higher current requirements of portable computers. • 0704 hasceramic base with gold–plating • 1309 / 1915 has LCP plastic base • Saturation Rated Current (IDC): The DC current when the inductance becomes 10% lower than its initial value. (Ta=25°C) • Temperature Rise Current (I rms): The actual current when temperature of coil becomes Δ40°C. (Ta=25°C) • Operating temperature range: -40 ~ 85°C INDUCTANCE AND RATED CURRENT RANGES APPLICATIONS • 0704 1.0 ~ 10000μH 3.0 ~ 0.02A • 1309 1.0 ~ 1000μH 5.0 ~ 0.17A • 1915 10 ~ 1000μH 3.9 ~ 0.53A • Electrical specifications at 25°C • Portable Telephones • Personal Computers • Other Various Electronic Appliances • DC/DC Converters, etc. DIMENSIONS EPOXY 680 D F J I E H mm (inches) Type A max. 6.60 (0.260) 12.95 (0.510) 18.54 (0.730) 0704 1309 1915 B max. 4.45 (0.175) 9.40 (0.370) 15.24 (0.600) C max. 2.92 (0.115) 5.21 (0.205) 7.62 (0.300) D 4.32 (0.170) 7.62 (0.300) 12.70 (0.500) E 1.27 (0.050) 2.54 (0.100) 2.54 (0.100) F 1.02 (0.040) 2.54 (0.100) 2.54 (0.100) H 3.56 (0.140) 2.79 (0.110) 2.79 (0.110) I 1.40 (0.055) 2.92 (0.115) 2.92 (0.115) J 4.06 (0.160) 7.37 (0.290) 12.45 (0.490) HOW TO ORDER LM XS 0704 M R04 D T A S Family LM = Power Inductor Series XS = Shielded Size 0704 = 7x4xh 1309 = 13x9xh (h = see catalog) Tolerance M = ±20% Inductance R04 = 0.039μH R39 = 0.390μH 3R9 = 3.900μH 390 = 39.00μH 391 = 390.0μH 392 = 3900μH Style Termination T = Sn Plate Special A = Standard Packaging S = 13" Reel 20 LMax SMD Power Inductor LMXS Series – Shielded Style D ELECTRICAL CHARACTERISTICS 0704 Codes 1R0 1R5 2R2 3R3 4R7 6R8 100 150 220 330 470 680 101 151 221 331 471 681 102 152 222 332 472 682 103 L (μH) 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 68 100 150 220 330 470 680 1000 1500 2200 3300 4700 6800 10000 Tolerance M M M M M M M M M M M M M M M M M M M M M M M M M Test Condition L Q 100KHz, 0.1V 200KHz, 100KHz, 0.1V 200KHz, 100KHz, 0.1V 200KHz, 100KHz, 0.1V 200KHz, 100KHz, 0.1V 200KHz, 100KHz, 0.1V 200KHz, 100KHz, 0.1V 200KHz, 100KHz, 0.1V 100KHz, 100KHz, 0.1V 100KHz, 100KHz, 0.1V 100KHz, 100KHz, 0.1V 100KHz, 100KHz, 0.1V 100KHz, 100KHz, 0.1V 100KHz, 100KHz, 0.1V 100KHz, 100KHz, 0.1V 100KHz, 100KHz, 0.1V 100KHz, 100KHz, 0.1V 100KHz, 100KHz, 0.1V 100KHz, 100KHz, 0.1V 100KHz, 100KHz, 0.1V 100KHz, 100KHz, 0.1V 100KHz, 100KHz, 0.1V 100KHz, 100KHz, 0.1V 100KHz, 100KHz, 0.1V 100KHz, 100KHz, 0.1V 100KHz, 0.1V 0.1V 0.1V 0.1V 0.1V 0.1V 0.1V 0.1V 0.1V 0.1V 0.1V 0.1V 0.1V 0.1V 0.1V 0.1V 0.1V 0.1V 0.1V 0.1V 0.1V 0.1V 0.1V 0.1V 0.1V DCR (Ω) max. 0.040 0.045 0.050 0.055 0.060 0.065 0.075 0.090 0.11 0.19 0.23 0.29 0.48 0.59 0.90 1.40 1.80 2.20 3.40 4.20 8.50 11.0 13.9 25.0 32.8 SRF ref (MHz) 250 125 120 120 105 50 38 33 25 20 20 15 10 9 6 5 4 3 2 2 2 1 1 1 0.8 Q min. 30 30 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 50 50 50 50 50 50 I rms (A) max. 3.00 2.30 1.80 1.60 1.40 1.20 1.00 0.80 0.70 0.60 0.50 0.40 0.30 0.26 0.22 0.20 0.19 0.18 0.15 0.12 0.10 0.08 0.06 0.04 0.02 1309 Codes 1R0 1R5 2R2 3R3 4R7 6R8 100 150 220 330 470 680 101 151 221 102 L (μH) 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 68 100 150 220 1000 Tolerance M M M M M M M M M M M M M M M M Test Condition 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V DCR (Ω) max. 0.021 0.022 0.032 0.039 0.054 0.075 0.101 0.150 0.207 0.334 0.472 0.660 1.110 1.550 2.000 8.300 SRF ref (MHz) 140 120 80 70 40 38 35 25 19 15 13 10 7 6 5 2 IDC (A) max 5.6 5.2 5.0 3.9 3.2 2.8 2.4 2.0 1.6 1.4 1.0 0.9 0.8 0.6 0.5 0.32 I rms (A) max. 5.0 4.5 3.8 3.3 2.7 2.2 2.0 1.5 1.3 1.1 0.8 0.7 0.6 0.5 0.37 0.17 21 LMax SMD Power Inductor LMXS Series – Shielded Style D 1915 Codes 100 150 220 330 470 680 101 151 221 331 471 681 102 22 L (μH) 10 15 22 33 47 68 100 150 220 330 470 680 1000 Tolerance M M M M M M M M M M M M M Test Condition 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V DCR (Ω) max. 0.040 0.048 0.059 0.075 0.097 0.138 0.207 0.293 0.470 0.780 1.080 1.400 2.010 SRF ref (MHz) 30 20 18 14 10 9.0 7.0 6.0 5.0 4.0 3.0 2.5 2.0 IDC (A) max. 8.0 7.00 6.00 5.00 4.00 3.00 2.40 2.10 1.90 1.10 1.10 0.96 0.80 I rms (A) max. 3.9 3.4 3.1 2.8 2.4 2.0 1.7 1.3 1.1 0.86 0.73 0.64 0.53 LMax SMD Power Inductor LMXS Series – Shielded Style F FEATURES CHARACTERISTICS • Magnetically Shielded Construction • Large Current • Low DCR • Rated Current (IDC): The DC current that will cause an approximate ΔT of 40°C. (Ta=25°C) • Operating temperature range: -40°C ~ +125°C APPLICATIONS INDUCTANCE AND RATED CURRENT RANGES • Telephones • PCs • Notebooks • Hard Disk Drives • Peripherals • 0606 4.7μH ~ 100.0μH • 06C6 4.7μH ~ 100.0μH • 0707 3.3μH ~ 47.0μH • 07C7 3.3μH ~ 1000.0μH • 07E7 3.3μH ~ 1000.0μH • 1010 10.0μH ~ 1500.0μH • 1313 6.0μH ~ 1500.0μH • 131H 2.0μH ~ 220.0μH • 131J 1.2μH ~ 220.0μH • Electrical specifications at 25°C 1.50 ~ 0.33A 1.60 ~ 0.42A 1.60 ~ 0.54A 1.90 ~ 0.13A 2.30 ~ 0.14A 2.50 ~ 0.22A 3.60 ~ 0.29A 6.20 ~ 1.00A 8.20 ~ 1.30A DIMENSIONS C A D G H 4R7 I E B F EPOXY Type 0606 06C6 0707 07C7 07E7 1010 1313 131H 131J A 6.00 ± 0.20 (0.236 ± 0.008) 6.00 ± 0.20 (0.236 ± 0.008) 7.00 ± 0.20 (0.276 ± 0.008) 7.00 ± 0.20 (0.276 ± 0.008) 7.00 ± 0.20 (0.276 ± 0.008) 10.1 ± 0.30 (0.398 ± 0.012) 12.5 ± 0.30 (0.492 ± 0.012) 12.5 ± 0.30 (0.492 ± 0.012) 12.5 ± 0.30 (0.492 ± 0.012) B 6.00 ± 0.20 (0.236 ± 0.008) 6.00 ± 0.20 (0.236 ± 0.008) 7.00 ± 0.20 (0.276 ± 0.008) 7.00 ± 0.20 (0.276 ± 0.008) 7.00 ± 0.20 (0.276 ± 0.008) 10.1 ± 0.30 (0.398 ± 0.012) 12.5 ± 0.30 (0.492 ± 0.012) 12.5 ± 0.30 (0.492 ± 0.012) 12.5 ± 0.30 (0.492 ± 0.012) HOW TO ORDER LM XS Family LM = Power Inductor Series XS = Shielded H 0.1 typ. C 2.50 ± 0.20 (0.099 ± 0.008) 2.80 ± 0.20 (0.110 ± 0.008) 2.80 ± 0.20 (0.110 ± 0.008) 3.20 ± 0.20 (0.126 ± 0.008) 4.50 ± 0.30 (0.177 ± 0.012) 4.50 ± 0.30 (0.177 ± 0.012) 5.50 ± 0.30 (0.217 ± 0.012) 6.50 ± 0.35 (0.256 ± 0.014) 7.50 ± 0.35 (0.295 ± 0.014) D 2.00 ± 0.10 (0.079 ± 0.004) 2.00 ± 0.10 (0.079 ± 0.004) 2.00 ± 0.10 (0.079 ± 0.004) 2.00 ± 0.10 (0.079 ± 0.004) 2.00 ± 0.10 (0.079 ± 0.004) 3.00 ± 0.10 0.118 ± 0.004) 3.00 ± 0.10 0.118 ± 0.004) 3.00 ± 0.10 0.118 ± 0.004) 3.00 ± 0.10 0.118 ± 0.004) 0707 M Size 0707 = 7x7xh 07C7 = 7x7xC(h) (h = see catalog) Tolerance M = ±20% mm (inches) E 3.00 typ (0.118 typ) 3.00 typ (0.118 typ) 4.00 typ (0.193 typ) 4.00 typ (0.193 typ) 4.00 typ (0.193 typ) 6.00 ± 0.20 (0.236 ± 0.008) 8.60 ± 0.30 0.339 ± 0.012) 8.60 ± 0.30 0.339 ± 0.012) 8.60 ± 0.30 0.339 ± 0.012) 2R2 Inductance 2R2 = 2.20μH 680 = 68.0μH 152 = 1500μH F 1.50 typ (0.059 typ) 1.50 typ (0.059 typ) 1.50 typ (0.059 typ) 1.50 typ (0.059 typ) 1.50 typ (0.059 typ) 2.00 ± 0.15 (0.079 ± 0.006) 2.00 ± 0.15 (0.079 ± 0.006) 2.00 ± 0.15 (0.079 ± 0.006) 2.00 ± 0.15 (0.079 ± 0.006) G 2.20 (0.087) 2.20 (0.087) 2.20 (0.087) 2.20 (0.087) 2.20 (0.087) 3.20 (0.126) 3.20 (0.126) 3.20 (0.126) 3.20 (0.126) H 2.00 (0.079) 2.00 (0.079) 2.00 (0.079) 2.00 (0.079) 2.00 (0.079) 2.50 (0.099) 2.50 (0.099) 2.50 (0.099) 2.50 (0.099) I 2.60 (0.103) 2.60 (0.103) 3.60 (0.103) 3.60 (0.142) 3.60 (0.142) 5.60 (0.220) 8.20 (0.322) 8.20 (0.322) 8.20 (0.322) F T A S Style Termination T = Sn Plate Special A = Standard Packaging S = 13" Reel 23 LMax SMD Power Inductor LMXS Series – Shielded Style F ELECTRICALCHARACTERISTICS 0606 Codes 4R7 6R8 100 150 220 330 470 680 101 L (μH) 4.7 6.8 10 15 22 33 47 68 100 Tolerance M M M M M M M M M Test Condition 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V DCR (Ω) max. 0.050 0.080 0.098 0.140 0.208 0.310 0.390 0.540 0.810 IDC (A) max. 1.50 1.30 1.00 0.88 0.73 0.59 0.48 0.42 0.33 L (μH) 4.7 6.8 10 15 22 33 47 68 100 Tolerance M M M M M M M M M Test Condition 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V DCR (Ω) max. 0.050 0.073 0.098 0.128 0.172 0.290 0.420 0.533 0.730 IDC (A) max. 1.60 1.50 1.30 1.00 0.77 0.69 0.59 0.50 0.42 L (μH) 3.3 4.7 6.8 10 15 22 33 47 Tolerance M M M M M M M M Test Condition 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V DCR (Ω) max. 0.045 0.054 0.071 0.100 0.156 0.220 0.290 0.410 IDC (A) max. 1.60 1.50 1.30 1.10 0.88 0.75 0.65 0.54 L(μH) 3.3 4.7 6.8 10 15 22 33 47 68 100 150 220 330 470 680 1000 Tolerance M M M M M M M M M M M M M M M M TestCondition 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V DCR(Ω)max. 0.028 0.044 0.050 0.064 0.090 0.132 0.192 0.290 0.372 0.540 0.780 1.260 2.000 2.460 3.780 5.740 IDC(A)max. 1.90 1.70 1.60 1.40 1.10 0.96 0.75 0.67 0.59 0.45 0.37 0.29 0.22 0.20 0.16 0.13 06C6 Codes 4R7 6R8 100 150 220 330 470 680 101 0707 Codes 3R3 4R7 6R8 100 150 220 330 470 07C7 Codes 3R3 4R7 6R8 100 150 220 330 470 680 101 151 221 331 471 681 102 24 LMax SMD Power Inductor LMXS Series – Shielded Style F 07E7 Codes 3R3 4R7 6R8 100 150 220 330 470 680 101 151 221 331 471 681 102 L (μH) 3.3 4.7 6.8 10 15 22 33 47 68 100 150 220 330 470 680 1000 Tolerance M M M M M M M M M M M M M M M M Test Condition 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V DCR (Ω) max. 0.024 0.036 0.047 0.045 0.063 0.075 0.120 0.150 0.210 0.300 0.410 0.624 0.890 1.260 1.780 2.740 IDC (A) max. 2.30 2.00 1.70 1.30 1.10 0.90 0.82 0.75 0.60 0.50 0.40 0.33 0.25 0.22 0.20 0.14 L (μH) 10 15 22 33 47 68 100 150 220 330 470 680 1000 1500 Tolerance M M M M M M M M M M M M M M Test Condition 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V DCR (Ω) max. 0.044 0.057 0.071 0.100 0.120 0.170 0.240 0.420 0.570 0.820 1.240 1.920 3.360 4.080 IDC (A) max. 2.50 2.20 1.90 1.60 1.40 1.20 1.00 0.79 0.65 0.54 0.47 0.38 0.29 0.22 L (μH) 6 10 15 22 33 47 68 100 150 220 330 470 680 1000 1500 Tolerance M M M M M M M M M M M M M M M Test Condition 100KHz,1.0V 100KHz,1.0V 100KHz,1.0V 100KHz,1.0V 100KHz,1.0V 100KHz,1.0V 100KHz,1.0V 100KHz,1.0V 100KHz,1.0V 100KHz,1.0V 100KHz,1.0V 100KHz,1.0V 100KHz,1.0V 100KHz,1.0V 100KHz,1.0V DCR (Ω) max. 0.020 0.026 0.032 0.041 0.050 0.075 0.100 0.140 0.230 0.330 0.500 0.630 0.920 1.350 2.080 IDC (A) max. 3.60 3.40 2.80 2.30 1.90 1.60 1.30 1.10 0.88 0.72 0.59 0.49 0.43 0.34 0.29 1010 Codes 100 150 220 330 470 680 101 151 221 331 471 681 102 152 1313 Codes 6R0 100 150 220 330 470 680 101 151 221 331 471 681 102 152 25 LMax SMD Power Inductor LMXS Series – Shielded Style F 131H Codes 2R0 4R2 7R0 100 150 220 330 470 680 101 221 L (μH) 2.0 4.2 7.0 10 15 22 33 47 68 100 220 Tolerance M M M M M M M M M M M Test Condition 100KHz,1.0V 100KHz,1.0V 100KHz,1.0V 100KHz,1.0V 100KHz,1.0V 100KHz,1.0V 100KHz,1.0V 100KHz,1.0V 100KHz,1.0V 100KHz,1.0V 100KHz,1.0V DCR (Ω) max. 0.014 0.018 0.022 0.025 0.029 0.038 0.049 0.070 0.095 0.150 0.330 IDC (A) max. 6.20 5.50 5.00 4.80 4.20 3.50 2.80 2.40 2.00 1.60 1.00 L (μH) 1.2 2.7 3.9 5.6 6.8 10 15 22 33 47 68 100 150 220 Tolerance M M M M M M M M M M M M M M Test Condition 100KHz,1.0V 100KHz,1.0V 100KHz,1.0V 100KHz,1.0V 100KHz,1.0V 100KHz,1.0V 100KHz,1.0V 100KHz,1.0V 100KHz,1.0V 100KHz,1.0V 100KHz,1.0V 100KHz,1.0V 100KHz,1.0V 100KHz,1.0V DCR (Ω) max. 0.009 0.012 0.013 0.014 0.016 0.019 0.022 0.032 0.048 0.064 0.094 0.150 0.210 0.310 IDC (A) max. 8.20 7.00 6.70 6.30 5.90 5.40 4.70 4.00 3.20 2.70 2.00 1.90 1.50 1.30 131J Codes 1R2 2R7 3R9 5R6 6R8 100 150 220 330 470 680 101 151 221 26 LMax SMD Power Inductor LMXS Series – Shielded Style G FEATURES CHARACTERISTICS • Magnetically Shielded Construction • Large Current • Low DCR • Rated Current (IDC): The DC current that will cause an approximate ΔT of 40°C. (Ta=25°C) • Operating temperature range: -40°C ~ +125°C APPLICATIONS INDUCTANCE AND RATED CURRENT RANGES • LCD Televisions • Notebooks • Handheld Communication • DC/DC Converters, etc. • 0707 10μH ~ 1000μH 1.68 ~ 0.16A • 07D7 10μH ~ 1000μH 1.84 ~ 0.18A • Electrical specifications at 25°C DIMENSIONS D H A Max F I C Max G B Max J E Solder Mask K mm (inches) Type 0707 07D7 A max. 7.50 (0.295) 7.50 (0.295) B max. 7.50 (0.295) 7.50 (0.295) HOW TO ORDER LM XS Family LM = Power Inductor Series XS = Shielded C max. 3.50 (0.138) 4.50 (0.177) D 2.00 (0.079) 2.00 (0.079) E 1.10 (0.043) 1.10 (0.043) F 5.08 (0.200) 5.08 (0.200) G 6.30 (0.248) 6.30 (0.248) H 3.00 (0.118) 3.00 (0.118) I 1.91 (0.075) 1.91 (0.075) J 4.50 (0.177) 4.50 (0.177) K 10.5 (0.413) 10.5 (0.413) 0707 M R04 G T A S Size 0707 = 7x7xh 07C7 = 7x7xC(h) (h = see catalog) Tolerance M = ±20% Inductance 3R9 = 3.900μH 390 = 39.00μH 391 = 390μH 102 = 1000μH Style Termination T = Sn Plate Special A = Standard Packaging S = 13" Reel 27 LMax SMD Power Inductor LMXS Series – Shielded Style G ELECTRICAL CHARACTERISTICS 0707 Codes 100 120 150 180 220 270 330 390 470 560 680 820 101 121 151 181 221 271 331 391 471 561 681 821 102 L (μH) 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 1000 Tolerance M M M M M M M M M M M M M M M M M M M M M M M M M Test Condition 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V DCR (Ω) max. 0.072 0.098 0.130 0.140 0.190 0.210 0.240 0.320 0.360 0.470 0.520 0.690 0.790 0.890 1.270 1.450 1.650 2.310 2.620 2.940 4.180 4.670 5.730 6.540 9.440 IDC (A) max. 1.68 1.52 1.33 1.20 1.07 0.96 0.91 0.77 0.76 0.68 0.61 0.57 0.50 0.49 0.43 0.39 0.35 0.32 0.28 0.26 0.24 0.22 0.19 0.18 0.16 L (μH) 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 560 680 820 1000 Tolerance M M M M M M M M M M M M M M M M M M M M M M M M Test Condition 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V DCR (Ω) max. 0.060 0.070 0.081 0.091 0.110 0.150 0.170 0.230 0.260 0.350 0.380 0.430 0.610 0.660 0.880 0.980 1.170 1.640 1.860 2.850 3.620 4.630 5.200 6.000 IDC (A) max. 1.84 1.71 1.47 1.31 1.23 1.12 0.96 0.91 0.88 0.75 0.69 0.61 0.60 0.52 0.46 0.42 0.36 0.34 0.32 0.29 0.23 0.22 0.20 0.18 07D7 Codes 100 120 150 180 220 270 330 390 470 560 680 820 101 121 151 181 221 271 331 391 561 681 821 102 28 LMax SMD Power Inductor LMXS Series – Shielded Style H FEATURES CHARACTERISTICS • Magnetically Shielded Construction • Large Current • Low DCR • Rated Current (IDC): The DC Current that will cause a drop in inductance value of approximately 20%. • Operating temperature range: -40°C ~ +125°C APPLICATIONS INDUCTANCE AND RATED CURRENT RANGES • LCD Televisions • Notebooks • Handheld Communication • DC/DC Converters, etc. • 1212 3.9μH ~ 330μH 6.5 ~ 0.50A • 121G 2.4μH ~ 47μH 8.0 ~ 2.5A • 121J 10μH ~ 1000μH 4.0 ~ 0.40A • Electrical specifications at 25°C DIMENSIONS D I H C Max A Max F B Max J G Solder Mask E K mm (inches) Type 1212 121G 121J A max. 12.5 (0.492) 12.5 (0.492) 12.5 (0.492) B max. 12.5 (0.492) 12.5 (0.492) 12.5 (0.492) HOW TO ORDER LM XS Family LM = Power Inductor Series XS = Shielded C max. 4.50 (0.177) 6.20 (0.244) 8.00 (0.315) D 5.00 (0.197) 5.00 (0.197) 5.00 (0.197) E 2.00 (0.079) 2.00 (0.079) 2.00 (0.079) F 7.60 (0.299) 7.60 (0.299) 7.60 (0.299) G 10.00 (0.393) 10.00 (0.394) 10.00 (0.394) H 6.00 (0.236) 6.00 (0.236) 6.00 (0.236) I 3.00 (0.118) 3.00 (0.118) 3.00 (0.118) J 7.00 (0.276) 7.00 (0.276) 7.00 (0.276) K 18.0 (0.709) 18.0 (0.709) 18.0 (0.709) 1212 M R04 H T A S Size 1212 = 12x12xh 121G = 12x12xG(h) (h = see catalog) Tolerance M = ±20% Inductance 3R9 = 3.900μH 390 = 39.00μH 391 = 390μH 102 = 1000μH Style Termination T = Sn Plate Special A = Standard Packaging S = 13" Reel 29 LMax SMD Power Inductor LMXS Series – Shielded Style H ELECTRICAL CHARACTERISTICS 1212 Codes 3R9 4R7 6R8 100 120 150 180 220 270 330 390 470 560 680 820 101 121 151 181 221 271 331 L (μH) 3.9 4.7 6.8 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 Tolerance M M M M M M M M M M M M M M M M M M M M M M Test Condition 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V DCR (Ω) max. 0.015 0.018 0.023 0.028 0.038 0.050 0.057 0.066 0.080 0.097 0.132 0.150 0.190 0.220 0.260 0.308 0.380 0.530 0.620 0.700 0.876 0.990 IDC (A) max. 6.50 5.70 4.90 4.50 4.00 3.20 3.10 2.90 2.80 2.70 2.10 1.90 1.80 1.50 1.30 1.20 1.10 0.95 0.85 0.80 0.60 0.50 L (μH) 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 1000 Tolerance M M M M M M M M M M M M M M M M M M M M M M M M M Test Condition 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V DCR (Ω) max. 0.025 0.027 0.030 0.038 0.045 0.055 0.063 0.075 0.085 0.110 0.120 0.140 0.165 0.195 0.250 0.290 00400 00460 0.510 0.690 0.770 0.880 1.200 1.340 1.530 IDC (A) max. 4.00 3.50 3.30 3.00 2.80 2.30 2.10 2.00 1.80 1.70 1.50 1040 1.30 1.10 1.00 0.90 0.80 0.75 0.68 0.65 0.58 0.54 0048 0043 0040 121G Codes 100 120 150 180 220 270 330 390 470 560 680 820 101 121 151 181 221 271 331 391 471 561 681 821 102 30 LMax SMD Power Inductor LMXS Series – Shielded Style H 121J Codes 2R4 4R7 7R6 100 120 150 180 220 270 330 390 470 L (μH) 2.4 4.7 7.6 10 12 15 18 22 27 33 39 47 Tolerance M M M M M M M M M M M M Test Condition 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V DCR (Ω) max. 0.012 0.016 0.020 0.022 0.025 0.027 0.039 0.043 0.046 0.065 0.073 0.100 IDC (A) max. 8.00 6.80 5.90 5.40 4.90 4.50 3.90 3.60 3.40 3.00 2.75 2.50 31 LMax SMD Power Inductor LMXS Series – Shielded Style J FEATURES CHARACTERISTICS • Directly connected electrode on ferrite core • High power, High saturation inductors • Ideal inductors for DC/DC converters • Magnetically shielded against radiation • Available on tape and reel for automatic surface mounting • Rated DC current: The current when the inductance becomes 35% lower than its initial value or the actual current when the temperature of coil increases to ΔT=40°C. The smaller one is defined as Rated DC Current. (Ta=25°C) • Operating temperature range: -40 ~ 85°C APPLICATIONS INDUCTANCE AND RATED CURRENT RANGES • Power Supply for VTRs • LCD Televisions • Notebook PCs • Portable Communication • DC/DC Converters, etc. • 0606 2.5 ~ 100μH 2.60 ~ 0.40A • 1010 10 ~ 150μH 2.70 ~ 0.70A • 101D 1.3 ~ 330μH 10.0 ~ 0.70A • 101E 1.5 ~ 1000μH 10.5 ~ 0.35A • Electrical specifications at 25°C DIMENSIONS C B 220 A D F J I H E EPOXY mm (inches) Type A max. 6.20 (0.244) 10.3 (0.406) 10.3 (0.406) 10.3 (0.406) 0606 1010 101D 101E B max. 6.30 (0.248) 10.4 (0.409) 10.4 (0.409) 10.4 (0.409) C max. 3.00 (0.118) 3.10 (0.122) 4.00 (0.157) 5.00 (0.197) D 4.70 (0.185) 7.70 (0.303) 7.70 (0.303) 7.70 (0.303) E 2.00 (0.079) 3.00 (0.118) 3.00 (0.118) 3.00 (0.118) F 0.60 (0.024) 1.20 (0.047) 1.20 (0.047) 1.20 (0.047) H 2.60 (0.102) 3.20 (0.126) 3.20 (0.126) 3.20 (0.126) I 1.00 (0.039) 1.60 (0.063) 1.60 (0.063) 1.60 (0.063) J 4.60 (0.181) 7.30 (0.287) 7.30 (0.287) 7.30 (0.287) HOW TO ORDER LM XS 0606 N R04 J T A S Family LM = Power Inductor Series XS = Shielded Size 0606 = 6x6xh 1010 = 10x10xh 101D = 10x10xD(h) (h = see catalog) Tolerance N = ±30% Inductance R04 = 0.039μH R39 = 0.390μH 3R9 = 3.900μH 390 = 39.00μH 391 = 390.0μH 392 = 3900μH Style Termination T = Sn Plate Special A = Standard Packaging S = 13" Reel 32 LMax SMD Power Inductor LMXS Series – Shielded Style J 0606/1010/101D/101E Codes 1R3 1R5 2R2 2R5 3R3 3R8 4R0 4R7 5R0 5R2 5R6 6R0 6R8 7R0 8R0 8R2 100 120 150 180 220 270 330 390 470 560 680 820 101 121 151 181 221 271 331 391 471 561 681 821 102 L (μH) 1.3 1.5 2.2 2.5 3.3 3.8 4.0 4.7 5.0 5.2 5.6 6.0 6.8 7.0 8.0 8.2 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 1000 Tolerance N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N Test Condition 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 0606 – – – 17.6 20.3 – 27.0 – 31.1 – – 41.9 – – 49.9 – 54.0 71.6 82.4 101.5 119.0 146.0 182.5 209.5 229.5 305.0 351.0 418.5 520.0 – – – – – – – – – – – – DCR (mΩ) max. 1010 101D – 8 – 8 – 11 – 12 – 13 – 17 – – – 21 – – – 22 – 25 – – – 26 – 27 – – – – 58 35 72 – 86 50 116 – 145 73 176 83 213 93 270 – 299 128 335 – 451 213 513 – 700 304 765 – 876 506 – 631 – 756 – – – 1090 – – – – – – – – – – – – 101E – 6 7 – 10 – – 12 – – – – 18 – – 20 26 33 41 46 61 69 84 106 130 149 201 227 253 303 370 419 500 672 812 953 1289 1430 1599 1768 1989 0606 – – – 2.60 2.30 – 2.10 – 1.85 – – 1.70 – – 1.50 – 1.30 1.20 1.10 1.05 0.95 0.85 0.76 0.68 0.60 0.55 0.48 0.45 0.40 – – – – – – – – – – – – IDC (A) max. 1010 101D – 10.0 – 10.0 – 8.00 – 7.50 – 6.50 – 6.00 – – – 5.70 – – – 5.50 – 5.20 – – 4.90 – 4.80 – – – – 2.70 4.40 2.25 – 2.22 3.60 1.90 – 1.78 2.90 1.63 2.80 1.46 2.30 1.32 – 1.18 2.10 1.10 – 1.04 1.50 0.94 – 0.84 1.35 0.76 – 0.70 1.15 – 1.03 – 0.92 – – – 0.70 – – – – – – – – – – – – 101E – 10.5 9.25 – 7.80 – – 6.40 – – – – 5.40 – – 4.85 3.45 3.40 2.83 2.62 2.44 2.24 1.88 1.70 1.56 1.39 1.36 1.20 1.09 1.00 0.91 0.84 0.75 0.68 0.60 0.57 0.50 0.47 0.43 0.39 0.35 33 LMax SMD Power Inductor LMXS Series – Shielded Style L FEATURES CHARACTERISTICS • Magnetically Shielded Construction • Large Current • Low DCR • Rated Current (IDC): The DC current that will cause an approximate ΔT of 40°C. (Ta=25°C) • Operating temperature range: -40°C ~ +125°C APPLICATIONS INDUCTANCE AND RATED CURRENT RANGES • LCD Televisions • Notebooks • Camcorders • Digital Cameras • DC/DC Converters for Portable Devices • 1010 0.8uH ~ 47.0uH 11.2 ~ 1.43A • 101D 1.5uH ~ 330uH 10.0 ~ 0.70A • Electrical specifications at 25°C DIMENSIONS A C D I B E G I Recommended Solder PAD Layout F H mm (inches) Type 1010 101D A max 10.3 (0.398) 10.3 (0.398) B max 10.5 (0.414) 10.5 (0.414) HOW TO ORDER LM XS Family LM = Power Inductor 34 Series XS = Shielded C max D E F 3.10 3.00 ± 0.10 7.70 ± 0.30 1.20 ± 0.150 (0.122) (0.119 ± 0.004) (0.303 ± 0.012) (0.048 ± 0.006) 3.80 ± 0.20 3.00 ± 0.1 7.70 ± 0.30 1.2 ± 0.15 (0.150 ± 0.008) (0.119 ± 0.004) (0.303 ± 0.012) (0.048 ± 0.006) G 7.30 (0.288) 7.30 (0.288) H 3.20 (0.126) 3.20 (0.126) I 1.60 (0.630) 1.60 (0.630) 1010 N 2R2 L T A S Size 1010 = 10x10xh 101D = 10x10xD(h) (h = see catalog) Tolerance N = ±30% Inductance 0R8 = 0.8μH 470 = 47.00μH 331 = 330.0μH Style Termination T = Sn Plate Special A = Standard Packaging S = 13" Reel LMax SMD Power Inductor LMXS Series – Shielded Style L ELECTRICAL CHARACTERISTICS 1010 Codes 0R8 1R5 2R2 3R3 4R7 6R8 8R0 100 150 220 330 470 L (μH) 0.8 1.5 2.2 3.3 4.7 6.8 8.0 10 15 22 33 47 Tolerance N N N N N N N N N N N N Test Condition 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V DCR (Ω) max. 0.0057 0.011 0.0159 0.021 0.030 0.035 0.050 0.059 0.091 0.143 0.202 0.299 IDC (A) max. 11.2 8.00 6.70 5.56 4.55 3.84 3.54 3.18 2.60 2.16 1.74 1.43 L (μH) 1.5 2.5 3.8 4.7 5.2 7.0 10 15 22 33 47 68 100 150 220 330 Tolerance N N N N N N N N N N N N N N N N Test Condition 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V DCR (Ω) max. 0.0081 0.010 0.013 0.022 0.022 0.027 0.035 0.050 0.073 0.093 0.128 0.213 0.304 0.506 0.756 1.090 IDC (A) max. 10.0 7.50 6.00 5.50 5.50 4.80 4.40 3.60 2.90 2.30 2.10 1.50 1.35 1.15 0.92 0.70 101D Codes 1R5 2R5 3R8 4R7 5R2 7R0 100 150 220 330 470 680 101 151 221 331 35 LMax SMD Power Inductor LMXS Series – Shielded Style M FEATURES CHARACTERISTICS • Magnetically shielded construction • RoHS compliance • Rated DC Current: The current when the inductance becomes 35% lower than its initial value. • Operating temperature: -40 ~ 85°C APPLICATIONS INDUCTANCE AND RATED CURRENT RANGES • LCD TV • DC to DC Converters • Notebook PC • 0808 1.0 ~ 100μH 6.5 ~ 0.75A • 08D8 1.8 ~ 100μH 7.0 ~ 1.05A • 08E8 1.0 ~ 100μH 9.0 ~ 1.30A • Electrical specifications at 25°C DIMENSIONS A D C F EPOXY J K E B H mm (inches) Type 0808 08D8 08E8 A B 8.00 ± 0.30 8.00 ± 0.30 (0.315 ± 0.012) (0.315 ± 0.012) 8.00 ± 0.30 8.00 ± 0.30 (0.315 ± 0.012) (0.315 ± 0.012) 8.0 ± 0.30 8.00 ± 0.30 (0.315 ± 0.012) (0.315 ± 0.012) C max. 3.00 (0.118) 4.00 (0.157) 4.50 (0.177) D Ref. 6.30 (0.248) 6.30 (0.248) 6.30 (0.248) E Ref. 2.50 (0.098) 2.50 (0.098) 2.50 (0.098) F Ref. 1.20 (0.047) 1.20 (0.047) 1.20 (0.047) H 2.80 (0.110) 2.80 (0.110) 2.80 (0.110) J 10.1 (0.398) 10.1 (0.398) 10.1 (0.398) K 6.10 (0.240) 6.10 (0.240) 6.10 (0.240) HOW TO ORDER LM XS 0808 N R04 M T A S Family LM = Power Inductor Series XN = Non-shielded Size 0808 = 8x8xh 08D8 = 8x8xD(h) (h = see catalog) Tolerance N = ±30% Inductance 3R9 = 3.900μH 390 = 39.00μH 391 = 390.0μH 392 = 3900μH Style Termination T = Sn Plate Special A = Standard Packaging S = 13" Reel 36 LMax SMD Power Inductor LMXS Series – Shielded Style M ELECTRICAL CHARACTERISTICS 0808/08D8/08E8 Codes 1R0 1R2 1R8 2R0 2R5 3R3 3R5 3R9 4R7 6R0 6R8 7R3 100 150 220 330 470 680 101 L (μH) 1.0 1.2 1.8 2.0 2.5 3.3 3.5 3.9 4.7 6.0 6.8 7.3 10 15 22 33 47 68 100 Tolerance N N N N N N N N N N N N N N N N N N N Test Condition 0808 08D8/08E8 100KHz, 0.25V 100KHz, 0.1V 100KHz, 0.25V 100KHz, 0.1V 100KHz, 0.25V 100KHz, 0.1V 100KHz, 0.25V 100KHz, 0.1V 100KHz, 0.25V 100KHz, 0.1V 100KHz, 0.25V 100KHz, 0.1V 100KHz, 0.25V 100KHz, 0.1V 100KHz, 0.25V 100KHz, 0.1V 100KHz, 0.25V 100KHz, 0.1V 100KHz, 0.25V 100KHz, 0.1V 100KHz, 0.25V 100KHz, 0.1V 100KHz, 0.25V 100KHz, 0.1V 100KHz, 0.25V 100KHz, 0.1V 100KHz, 0.25V 100KHz, 0.1V 100KHz, 0.25V 100KHz, 0.1V 100KHz, 0.25V 100KHz, 0.1V 100KHz, 0.25V 100KHz, 0.1V 100KHz, 0.25V 100KHz, 0.1V 100KHz, 0.25V 100KHz, 0.1V 0808 11.0 – – – 15.6 18.2 – – 24.7 – – 39.0 47.0 69.0 99.0 156 195 286 430 DCR (Ω) max. 08D8 – – 15.6 – 17.5 – 24.0 – 29.0 32.0 – – 48.0 67.0 105 157 189 290 410 08E8 9.50 12.2 – 14.0 – – – 19.0 22.0 – 25.0 – 36.0 53.0 75.0 125 150 240 360 0808 6.5 – – – 4.5 4.0 – – 3.4 – – 2.80 2.50 1.90 1.60 1.30 1.15 0.92 0.75 I sat (A) max* 08D8 – – 7.0 6.5 – 5.0 – 4.6 4.2 – – 3.00 2.75 2.30 1.75 1.52 1.30 1.05 0838 9.0 8.0 – 7.0 – – – 5.9 5.6 – 4.4 – 4.0 2.9 2.6 2.2 1.8 1.5 1.3 *Saturation Current: The current when the inductance becomes 35% lower than its initial value. 37 LMax SMD Power Inductor LMXS Series – Shielded Style P FEATURES CHARACTERISTICS • Magnetically Shielded Construction • Large Current • Low DCR • Rated Current (IDC): The DC current that will cause an approximate ΔT of 40°C. (Ta=25°C) • Operating temperature range: -40°C ~ +125°C APPLICATIONS INDUCTANCE AND RATED CURRENT RANGES • LCD Televisions • Notebooks • Camcorders • Digital Cameras • DC/DC Converters for Portable Devices • 0404 1.5 ~ 33μH 1.55 ~ 0.32A • 0505 1.0~ 39μH 1.72 ~ 0.30A • 05C5 1.2 ~ 180μH 2.56 ~ 0.22A • 0606 4.1 ~ 100μH 1.95 ~ 0.36A • 06C6 2.6 ~ 100μH 2.6 ~ 0.42A • 0707 3.3 ~ 10μH 3.00 ~ 1.8A • 07C7 3.0 ~ 100μH 3.00 ~ 0.54A • 07D7 3.3 ~ 100μH 3.50 ~ 0.65A • Electrical specifications at 25°C DIMENSIONS F A I J C B D E H G J Recommended Solder PAD Layout mm (inches) Type 0404 0505 05C5 0606 06C6 0707 07C7 07D7 A 3.80 ± 0.50 (0.150 ± 0.012) 4.70 ± 0.50 (0.185 ± 0.012) 4.70 ± 0.50 (0.185 ± 0.012) 5.7 ± 0.50 (0.225 ± 0.012) 5.70 ± 0.50 (0.225 ± 0.012) 6.70 ± 0.40 (0.264 ± 0.158) 6.70 ± 0.50 (0.264 ± 0.012) 6.70 ± 0.50 (0.264 ± 0.012) B max C max 3.80 ± 0.50 1.80 ± 0.20 (0.150 ± 0.012) (0.071 ± .008) 4.70 ± 0.50 2.00 (0.185 ± 0.012) (0.079) 4.70 ± 0.50 3.00 (0.185 ± 0.012) (0.119) 5.70 ± 0.50 2.10 (0.225 ± 0.012) (0.083) 5.70 ± 0.50 3.00 (0.225 ± 0.012) (0.119) 6.70 ± 0.40 1.90 (0.264 ± 0.158) (0.075) 6.70 ± 0.50 3.00 (0.264 ± 0.012) (0.119) 6.70 ± 0.50 4.00 (0.264 ± 0.012) (0.158) HOW TO ORDER LM XS Family LM = Power Inductor 38 Series XS = Shielded D 3.80 (0.150) 4.50 (0.177) 4.50 (0.177) 5.50 (0.217) 5.50 (0.217) 6.50 (0.256) 6.50 (0.256) 6.50 (0.256) E 1.10 (0.044) 1.50 (0.059) 1.50 (0.059) 2.00 (0.079) 2.00 (0.079) 2.00 (0.079) 2.00 (0.079) 2.00 (0.079) F max 3.80 (0.150) 4.50 (0.177) 4.50 (0.177) 5.50 (0.217) 5.50 (0.217) 6.50 (0.256) 6.50 (0.256) 6.50 (0.256) G max 5.00 (0.196) 6.90 (0.272) 6.90 (0.272) 8.20 (0.323) 8.20 (0.323) 9.50 (0.375) 9.50 (0.375) 9.50 (0.375) H 1.10 (0.044) 1.50 (0.059) 1.50 (0.059) 2.00 (0.079) 2.00 (0.079) 2.00 (0.079) 2.00 (0.079) 2.00 (0.079) I 4.60 (0.181) 5.30 (0.209) 5.30 (0.209) 6.30 (0.248) 6.30 (0.248) 7.30 (0.288) 7.30 (0.288) 7.30 (0.288) 0505 M 2R2 P T A S Size 0505 = 5x5xh 05C5 = 5x5xC(h) (h = see catalog) Tolerance M = ±20% Inductance 0R8 = 0.8μH 470 = 47.00μH 331 = 330.0μH Style Termination T = Sn Plate Special A = Standard Packaging S = 13" Reel LMax SMD Power Inductor LMXS Series – Shielded Style P ELECTRICAL CHARACTERISTICS 0404 Codes 1R5 2R2 3R3 4R7 6R8 100 150 220 330 L (μH) 1.5 2.2 3.3 4.7 6.8 10 15 22 33 Tolerance M M M M M M M M M Test Condition 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V DCR (Ω) max. 0.052 0.072 0.085 0.105 0.170 0.210 0.295 0.430 0.675 IDC (A) max. 1.55 1.20 1.10 0.90 0.73 0.55 0.45 0.40 0.32 L (μH) 1.0 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 39 Tolerance M M M M M M M M M M M M M M M M M Test Condition 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V DCR (Ω) max. 0.045 0.060 0.070 0.085 0.110 0.128 0.145 0.158 0.185 0.200 0.210 0.240 0.338 0.397 0.441 0.694 0.709 IDC (A) max. 1.72 1.32 1.28 1.04 0.88 0.84 0.80 0.76 0.68 0.61 0.56 0.50 0.48 0.41 0.35 0.32 0.30 L (μH) 1.2 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 Tolerance M M M M M M M M M M M M M M M M M M M M M M M M M M Test Condition 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V DCR (Ω) max. 0.0236 0.0275 0.0313 0.0433 0.0492 0.0648 0.0720 0.1009 0.1089 0.1175 0.1283 0.1316 0.1490 0.1660 0.2350 0.2610 0.3780 0.3837 0.5870 0.6245 0.6990 0.9148 1.020 1.270 1.350 1.540 IDC (A) max. 2.56 2.20 2.04 1.60 1.57 1.44 1.32 1.17 1.12 1.04 1.00 0.84 0.76 0.72 0.70 0.58 0.56 0.50 0.48 0.41 0.35 0.32 0.29 0.27 0.24 0.22 0505 Codes 1R0 2R2 2R7 3R3 3R9 4R7 5R6 6R8 8R2 100 120 150 180 220 270 330 390 05C5 Codes 1R2 1R8 2R2 2R7 3R3 3R9 4R7 5R6 6R8 8R2 100 120 150 180 220 270 330 390 470 560 680 820 101 121 151 181 39 LMax SMD Power Inductor LMXS Series – Shielded Style P 0606 Codes 4R1 5R4 6R2 8R9 100 120 150 180 220 270 330 390 470 560 680 820 101 L (μH) 4.1 5.4 6.2 8.9 10 12 15 18 22 27 33 39 47 56 68 82 100 Tolerance M M M M M M M M M M M M M M M M M Test Condition 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V DCR (Ω) max. 0.057 0.076 0.096 0.116 0.124 0.153 0.196 0.21 0.29 0.33 0.386 0.52 0.595 0.665 0.84 0.978 1.2 IDC (A) max. 1.95 1.6 1.4 1.25 1.2 1.1 0.97 0.85 0.8 0.75 0.65 0.57 0.54 0.5 0.43 0.41 0.36 L (μH) 2.6 3 4.2 5.3 6.2 8.2 10 12 15 18 22 27 33 39 47 56 68 82 100 Tolerance M M M M M M M M M M M M M M M M M M M Test Condition 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V DCR (Ω) max. 0.018 0.024 0.031 0.038 0.045 0.053 0.065 0.076 0.103 0.11 0.122 0.175 0.189 0.212 0.26 0.305 0.355 0.463 0.52 IDC (A) max. 2.6 2.4 2.2 1.9 1.8 1.6 1.3 1.2 1.1 1 0.9 0.85 0.75 0.7 0.62 0.58 0.52 0.46 0.42 06C6 Codes 2R6 3R0 4R2 5R3 6R2 8R2 100 120 150 180 220 270 330 390 470 560 680 820 101 40 LMax SMD Power Inductor LMXS Series – Shielded Style P 0707 Codes 3R3 4R7 6R8 100 L (μH) 3.3 4.7 6.8 10 Tolerance M M M M Test Condition 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V DCR (Ω) max. 0.069 0.075 0.106 0.15 IDC (A) max. 3 2.4 2.2 1.8 L (μH) 3 3.9 5 6 7.3 8.6 10 12 15 18 22 27 33 39 47 56 68 82 100 Tolerance M M M M M M M M M M M M M M M M M M M Test Condition 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V DCR (Ω) max. 0.024 0.027 0.031 0.035 0.054 0.058 0.065 0.07 0.084 0.095 0.128 0.142 0.165 0.21 0.238 0.277 0.304 0.39 0.535 IDC (A) max. 3 2.6 2.4 2.25 2.1 1.85 1.7 1.55 1.4 1.32 1.2 1.05 0.97 0.86 0.8 0.73 0.65 0.6 0.54 L (μH) 3.3 5 6 7.3 8.6 10 12 15 18 22 27 33 39 47 56 68 82 100 Tolerance M M M M M M M M M M M M M M M M M M Test Condition 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V 100KHz, 1.0V DCR (Ω) max. 0.02 0.024 0.027 0.031 0.034 0.038 0.053 0.057 0.092 0.096 0.109 0.124 0.138 0.155 0.202 0.234 0.324 0.358 IDC (A) max. 3.5 2.9 2.5 2.3 2.2 2 1.7 1.6 1.5 1.3 1.2 1.1 1 0.95 0.85 0.75 0.7 0.65 07C7 Codes 3R0 3R9 5R0 6R0 7R3 8R6 100 120 150 180 220 270 330 390 470 560 680 820 101 07D7 Codes 3R3 5R0 6R0 7R3 8R6 100 120 150 180 220 270 330 390 470 560 680 820 101 41 LMax SMD Power Inductor LMMN Series – Miniature Style M FEATURES • LMMN series miniature chip inductors are wound on a special ferrite core. • 0302/ 03A2/ 0403 are high Q value at high frequency and low DC resistance. • 0302/03A2/ 0403/ 0605 are low DC resistance, high current capacity, and high impedance characteristics. They are excellent for using as a choke coil in DC power supply circuits. • Operating temperature range (0202, 02A2, 02B2, 0302): -40°C to 105°C • Operating temperature range (03A2, 0403, 0605): -40°C to 85°C APPLICATIONS INDUCTANCE AND RATED CURRENT RANGES • 0202 1.00 ~ 10μH 2.80 ~ 0.65A • 02A2 1.00 ~ 10μH 3.70 ~ 0.90A • 02B2 1.00 ~ 22μH 2.30 ~ 0.51A • 0302 1.00 ~ 100μH 1.00 ~ 0.1A • 03A2 1.00 ~ 560μH 0.445 ~ 0.04A • 0403 1.00 ~ 2200μH 0.50 ~ 0.03A • 0302 (C) 0.47 ~ 120μH 3.40 ~ 0.17A • 03A2 (C) 1.00 ~ 560μH 1.00 ~ 0.06A • 0403 (C) 1.00 ~ 470μH 1.08 ~ 0.09A • 0605 (C) 0.12 ~ 10000μH 6.00 ~ 0.05A • Electrical specifications at 25°C • High Frequency Communication Products • Personal Computers • Disk Drives And Computer Peripherals • DC Power Supply Circuits H DIMENSIONS I C PAD LAYOUT E B A F E J I mm (inches) Type A 2.50 ± 0.20 0202 (0.098 ± 0.008) 2.50 ± 0.20 02A2 (0.098 ± 0.008) 2.50 ± 0.20 02B2 (0.098 ± 0.008) 3.20 ± 0.30 0302 / 0302 (C) (0.126 ± 0.012) 3.20 ± 0.30 03A2 / 03A2 (C) (0.126 ± 0.012) 4.50 ± 0.30 0403 / 0403 (C) (0.177 ± 0.012) 5.70 ± 0.30 0605 (C) (0.224 ± 0.012) 42 B 2.00 ± 0.20 (0.079 ± 0.008) 2.00 ± 0.20 (0.079 ± 0.008) 2.50 ± 0.20 (0.098 ± 0.008) 2.50 ± 0.20 (0.098 ± 0.008) 2.50 ± 0.20 (0.098 ± 0.008) 3.20 ± 0.20 (0.126 ± 0.008) 5.00 ± 0.30 (0.197 ± 0.012) C 1.00 max. (0.039) 1.25 max. (0.049) 1.05 max. (0.041) 1.55 ± 0.30 (0.061 ± 0.012) 2.00 ± 0.30 (0.079 ± 0.012) 2.60 ± 0.30 (0.102 ± 0.012) 4.70 ± 0.50 (0.185 ± 0.020) E 0.40 ± 0.20 (0.016 ± 0.008) 0.40 ± 0.20 (0.016 ± 0.008) 0.85 ref (0.033) 1.05 ± 0.30 (0.041 ± 0.012) 1.05 ± 0.30 (0.041 ± 0.012) 1.00 min. (0.039) 1.30 min. (0.051) F 1.00 min. (0.039) 1.00 min. (0.039) 0.85 ref (0.033) 1.05 ± 0.30 (0.041 ± 0.012) 1.05 ± 0.30 (0.041 ± 0.012) 1.00 min. (0.039) 1.70 min. (0.067) H 2.10 (0.083) 2.10 (0.083) 2.50 (0.098) 2.00 (0.079) 2.00 (0.079) 3.00 (0.118) 5.00 (0.197) I 0.90 (0.035) 0.90 (0.035) 1.20 (0.047) 1.50 (0.059) 1.50 (0.059) 2.00 (0.079) 2.00 (0.079) J 0.80 (0.031) 0.80 (0.031) 0.80 (0.031) 1.00 (0.039) 1.00 (0.039) 1.20 (0.047) 2.00 (0.079) LMax SMD Power Inductor LMMN Series – Miniature Style M HOW TO ORDER LM MN 0202 N R04 M T A R Family LM = Power Inductor Series MN = Miniature Size 0202 = 2x2xh (h = see catalog) Tolerance J = ±5% K = ±10% M = ±20% N = ±30% Inductance R39 = 0.390μH 3R9 = 3.900μH 390 = 39.00μH 391 = 390.0μH 392 = 3900μH Style Termination T = Sn Plate Special A = Standard C = Choke* Packaging R = 7" Reel S = 13" Reel* *Available for 0302, 03A2, 0402 and 0605 sizes only *0605 size only ELECTRICAL CHARACTERISTICS 0202 AVX PN LMMN0202M1R0MTAR LMMN0202M1R5MTAR LMMN0202M2R2MTAR LMMN0202M3R3MTAR LMMN0202M4R7MTAR LMMN0202M6R8MTAR LMMN0202M100MTAR 1 2 L (μH) 1.0 1.5 2.2 3.3 4.7 6.8 10 Tolerance M M M M M M M Test Condition 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V DCR (Ω) max. 0.085 0.128 0.19 0.304 0.44 0.541 0.854 IRMS1 (A) Typical 1.7 1.4 1.1 0.94 0.78 0.7 0.52 ISAT2 (A) Typical 2 1.7 1.4 1.2 0.98 0.82 0.65 The temperature rise current value (IRMS) is the DC current value that increases component temperature by up to 40ºC. (Ta=25°C) The saturation current value (lSAT) is the DC current value when the inductance decreases by 30% of its initial value. (Ta=25°C) 02A2 AVX PN LMMN02A2M1R0MTAR LMMN02A2M1R5MTAR LMMN02A2M2R2MTAR LMMN02A2M3R3MTAR LMMN02A2M4R7MTAR LMMN02A2M5R6MTAR LMMN02A2M6R8MTAR LMMN02A2M100MTAR 1 2 L (μH) 1.0 1.5 2.2 3.3 4.7 5.6 6.8 10 Tolerance M M M M M M M M Test Condition 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V DCR (Ω) max. 0.088 0.126 0.155 0.272 0.45 0.45 0.612 0.756 IRMS1 (A) Typical 1.8 1.5 1.3 1 0.81 0.72 0.66 0.59 ISAT2 (A) Typical 2.7 2.2 2 1.6 1.2 1.15 1.1 0.9 The temperature rise current value (IRMS) is the DC current value that increases component temperature by up to 40ºC. (Ta=25°C) The saturation current value (lSAT) is the DC current value when the inductance decreases by 30% of its initial value. (Ta=25°C) 02B2 AVX PN LMMN02B2M1R0MTAR LMMN02B2M1R5MTAR LMMN02B2M2R2MTAR LMMN02B2M3R3MTAR LMMN02B2M4R7MTAR LMMN02B2M5R6MTAR LMMN02B2M6R8MTAR LMMN02B2M8R2MTAR LMMN02B2M100MTAR LMMN02B2M220MTAR 1 2 L (μH) 1.0 1.5 2.2 3.3 4.7 5.6 6.8 8.2 10 22 Tolerance M M M M M M M M M M Test Condition 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V DCR (Ω) max. 0.085 0.115 0.168 0.239 0.316 0.42 0.487 0.548 0.61 1.552 IRMS1 (A) Typical 1.9 1.5 1.2 1.1 0.9 0.83 0.8 0.71 0.68 0.4 ISAT2 (A) Typical 2.3 1.9 1.5 1.3 1.1 0.98 0.9 0.84 0.79 0.51 The temperature rise current value (IRMS) is the DC current value that increases component temperature by up to 40ºC. (Ta=25°C) The saturation current value (lSAT) is the DC current value when the inductance decreases by 30% of its initial value. (Ta=25°C) 43 LMax SMD Power Inductor LMMN Series – Miniature Style M 0302 AVX PN LMMN0302N1R0MTAR LMMN0302N1R5MTAR LMMN0302M2R2MTAR LMMN0302M3R3MTAR LMMN0302M4R7MTAR LMMN0302K100MTAR LMMN0302K150MTAR LMMN0302K220MTAR LMMN0302K330MTAR LMMN0302K470MTAR LMMN0302K680MTAR LMMN0302K101MTAR L (μH) 1.0 1.5 2.2 3.3 4.7 10 15 22 33 47 68 100 Tolerance N N M M M K K K K K K K Test Condition 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V DCR (Ω) max. 0.078 0.068 0.126 0.18 0.195 0.42 0.75 1 1.4 2.2 3.2 4.5 IDC1 (A) Typical 1 1.2 0.79 0.7 0.65 0.45 0.3 0.25 0.2 0.17 0.13 0.1 SRF (MHz) min 100 100 64 50 43 26 22 19 17 13 9 8 1 IDC: The current when the inductance becomes 10% lower than its initial value or the current when the temperature of the coil increases by 20°C. The smaller one is defined as the rated DC current. (Ta=25°C) * Inductance Tolerance: J=±5%, K=±10%, M=±20% 03A2 AVX PN LMMN03A2M1R0MTAR LMMN03A2M1R2MTAR LMMN03A2*1R5MTAR LMMN03A2*1R8MTAR LMMN03A2*2R2MTAR LMMN03A2*2R7MTAR LMMN03A2*3R3MTAR LMMN03A2*3R9MTAR LMMN03A2*4R7MTAR LMMN03A2*5R6MTAR LMMN03A2*6R8MTAR LMMN03A2*8R2MTAR LMMN03A2*100MTAR LMMN03A2*120MTAR LMMN03A2*150MTAR LMMN03A2*180MTAR LMMN03A2*220MTAR LMMN03A2*270MTAR LMMN03A2*330MTAR LMMN03A2*390MTAR LMMN03A2*470MTAR LMMN03A2*560MTAR LMMN03A2*680MTAR LMMN03A2*820MTAR LMMN03A2*101MTAR LMMN03A2*121MTAR LMMN03A2*151MTAR LMMN03A2*181MTAR LMMN03A2*221MTAR LMMN03A2*271MTAR LMMN03A2*331MTAR LMMN03A2*391MTAR LMMN03A2*471MTAR LMMN03A2*561MTAR 1 L (μH) 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 560 Tolerance M M K, M K, M K, M K, M K, M K, M K, M K, M K, M K, M J, K J, K J, K J, K J, K J, K J, K J, K J, K J, K J, K J, K J, K J, K J, K J, K J, K J, K J, K J, K J, K J, K Test Condition 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1KHz, 0.1V 1KHz, 0.1V Q 20 20 20 20 20 20 20 20 20 20 20 20 35 35 35 35 35 35 40 40 40 40 40 40 40 40 40 40 40 40 40 50 50 50 Quality Factor Test Contition 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 796KHz, 0.1V 796KHz, 0.1V 796KHz, 0.1V 796KHz, 0.1V 796KHz, 0.1V 796KHz, 0.1V 796KHz, 0.1V 796KHz, 0.1V 796KHz, 0.1V 796KHz, 0.1V DCR (Ω) max. 0.5 0.6 0.6 0.7 0.8 0.9 1 1.1 1.2 1.3 1.5 1.6 1.8 2 2.2 2.5 2.8 3.1 3.5 3.9 4.3 4.9 5.5 6.2 7 8 9.3 10.2 11.8 12.5 15 22 25 28 IDC1 (A) Typical 0.445 0.425 0.4 0.39 0.37 0.32 0.3 0.29 0.27 0.25 0.24 0.225 0.19 0.18 0.17 0.165 0.15 0.125 0.115 0.11 0.1 0.085 0.08 0.07 0.08 0.075 0.07 0.065 0.065 0.065 0.065 0.05 0.045 0.04 IDC: The current when the inductance becomes 10% lower than its initial value or the current when the temperature of the coil increases by 20°C. The smaller one is defined as the rated DC current. (Ta=25°C) * Inductance Tolerance: J=±5%, K=±10%, M=±20% 44 SRF (MHz) min 100 100 75 60 50 43 38 35 31 28 25 23 20 18 16 15 14 13 12 11 11 10 9 8.5 8 7.5 7 6 5.5 5 5 5 5 5 ref LMax SMD Power Inductor LMMN Series – Miniature Style M 0403 AVX PN LMMN0403M1R0MTAR LMMN0403M1R2MTAR LMMN0403M1R5MTAR LMMN0403M1R8MTAR LMMN0403M2R2MTAR LMMN0403M2R7MTAR LMMN0403M3R3MTAR LMMN0403M3R9MTAR LMMN0403*4R7MTAR LMMN0403*5R6MTAR LMMN0403*6R8MTAR LMMN0403*8R2MTAR LMMN0403*100MTAR LMMN0403*120MTAR LMMN0403*150MTAR LMMN0403*180MTAR LMMN0403*220MTAR LMMN0403*270MTAR LMMN0403*330MTAR LMMN0403*390MTAR LMMN0403*470MTAR LMMN0403*560MTAR LMMN0403*680MTAR LMMN0403*820MTAR LMMN0403*101MTAR LMMN0403*121MTAR LMMN0403*151MTAR LMMN0403*181MTAR LMMN0403*221MTAR LMMN0403*271MTAR LMMN0403*331MTAR LMMN0403*391MTAR LMMN0403*471MTAR LMMN0403*561MTAR LMMN0403*681MTAR LMMN0403*821MTAR LMMN0403*102MTAR LMMN0403*122MTAR LMMN0403*152MTAR LMMN0403*182MTAR LMMN0403*222MTAR L (μH) 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 1000 1200 1500 1800 2200 Tolerance M M M M M M M M K, M K, M K, M K, M J, K J, K J, K J, K J, K J, K J, K J, K J, K J, K J, K J, K J, K J, K J, K J, K J, K J, K J, K J, K J, K J, K J, K J, K J, K J, K J, K J, K J, K Test Condition 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1KHz, 0.1V 1KHz, 0.1V 1KHz, 0.1V 1KHz, 0.1V 1KHz, 0.1V 1KHz, 0.1V 1KHz, 0.1V 1KHz, 0.1V 1KHz, 0.1V Quality Factor SPEC Test Contition 20 1MHz, 0.1V 20 1MHz, 0.1V 20 1MHz, 0.1V 20 1MHz, 0.1V 20 1MHz, 0.1V 20 1MHz, 0.1V 20 1MHz, 0.1V 20 1MHz, 0.1V 30 1MHz, 0.1V 30 1MHz, 0.1V 30 1MHz, 0.1V 30 1MHz, 0.1V 35 1MHz, 0.1V 35 1MHz, 0.1V 35 1MHz, 0.1V 35 1MHz, 0.1V 35 1MHz, 0.1V 35 1MHz, 0.1V 35 1MHz, 0.1V 35 1MHz, 0.1V 35 1MHz, 0.1V 35 1MHz, 0.1V 35 1MHz, 0.1V 35 1MHz, 0.1V 40 796KHz, 0.1V 40 796KHz, 0.1V 40 796KHz, 0.1V 40 796KHz, 0.1V 40 796KHz, 0.1V 40 796KHz, 0.1V 40 796KHz, 0.1V 40 796KHz, 0.1V 40 796KHz, 0.1V 40 796KHz, 0.1V 40 796KHz, 0.1V 40 796KHz, 0.1V 40 252KHz, 0.1V 40 252KHz, 0.1V 40 252KHz, 0.1V 40 252KHz, 0.1V 40 252KHz, 0.1V DCR (Ω) max. 0.2 0.2 0.3 0.3 0.3 0.32 0.35 0.38 0.4 0.47 0.5 0.56 0.56 0.62 0.73 0.82 0.94 1.1 1.2 1.4 1.5 1.7 1.9 2.2 2.5 3 3.7 4.5 5.4 6.8 8.2 9.7 11.8 14.5 17 20.5 25 30 37 45 50 IDC1 (A) Typical 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.45 0.45 0.4 0.38 0.36 0.34 0.32 0.3 0.27 0.24 0.22 0.2 0.18 0.17 0.16 0.15 0.13 0.12 0.11 0.1 0.095 0.09 0.08 0.07 0.065 0.06 0.05 0.045 0.04 0.035 0.03 SRF (MHz) min 120 100 85 75 62 53 47 41 38 33 31 27 23 21 19 17 15 14 12 11 10 9.3 8.4 7.5 6.8 6.2 5.5 5 4.5 4 3.6 3.3 3 2.7 2.5 2.2 2 1.8 1.6 1.5 1.3 1 IDC: The current when the inductance becomes 10% lower than its initial value or the current when the temperature of the coil increases by 20°C. The smaller one is defined as the rated DC current. (Ta=25°C) * Inductance Tolerance: J=±5%, K=±10%, M=±20% 45 LMax SMD Power Inductor LMMN Series – Miniature Style M 0302 (C) AVX PN LMMN0302NR47MTCR LMMN0302N1R0MTCR LMMN0302N1R5MTCR LMMN0302N2R2MTCR LMMN0302N3R3MTCR LMMN0302N4R7MTCR LMMN0302N6R8MTCR LMMN0302M100MTCR LMMN0302M150MTCR LMMN0302M220MTCR LMMN0302M330MTCR LMMN0302M470MTCR LMMN0302M680MTCR LMMN0302M101MTCR LMMN0302M121MTCR 1 2 L (μH) 0.47 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 68 100 120 Tolerance N N N N N N N M M M M M M M M Test Condition 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V DCR (Ω) max. 0.03 0.045 0.057 0.076 0.12 0.18 0.24 0.38 0.57 0.81 1.15 1.78 2.28 2.7 4.38 IRMS1 (A) Typ. 2.55 2.05 1.75 1.6 1.2 1 0.85 0.7 0.52 0.45 0.39 0.31 0.275 0.25 0.2 ISAT2 (A) Typ. 3.4 2.3 1.75 1.55 1.25 1 0.85 0.75 0.6 0.5 0.38 0.33 0.28 0.18 0.17 SRF (MHz) min 100 100 70 70 50 40 40 30 20 20 13 11 11 8 8 The temperature rise current value (IRMS) is the DC current value that increases component temperature by up to 40ºC. (Ta=25°C) The saturation current value (lSAT) is the DC current value when the inductance decreases by 30% of its initial value. (Ta=25°C) 03A2 (C) AVX PN LMMN03A2M1R0MTCR LMMN03A2M2R2MTCR LMMN03A2M3R3MTCR LMMN03A2M4R7MTCR LMMN03A2M6R8MTCR LMMN03A2M100MTCR LMMN03A2*220MTCR LMMN03A2*470MTCR LMMN03A2*101MTCR LMMN03A2*151MTCR LMMN03A2*221MTCR LMMN03A2*331MTCR LMMN03A2*391MTCR LMMN03A2*471MTCR LMMN03A2*561MTCR 1 L (μH) 1.0 2.2 3.3 4.7 6.8 10 22 47 100 150 220 330 390 470 560 Tolerance M M M M M M K, M K, M J, K J, K J, K J, K J, K J, K J, K Test Condition 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V DCR (Ω) max. 0.078 0.126 0.165 0.195 0.33 0.572 0.923 1.69 4.55 9.1 10.92 13 22.1 24.7 28.6 IDC1 (A) Typical 1 0.79 0.5 0.45 0.45 0.3 0.25 0.17 0.1 0.08 0.07 0.06 0.06 0.06 0.06 IDC: The current when the inductance becomes 10% lower than its initial value or the current when the temperature of the coil increases by 20°C. The smaller one is defined as the rated DC current. (Ta=25°C) * Inductance Tolerance: J=±5%, K=±10%, M=±20% 46 SRF (MHz) min 100 64 50 43 38 26 19 12 8 7 5.5 4.5 4 3.7 3.4 LMax SMD Power Inductor LMMN Series – Miniature Style M 0403 (C) AVX PN LMMN0403M1R0MTCR LMMN0403M1R5MTCR LMMN0403M2R2MTCR LMMN0403M3R3MTCR LMMN0403*4R7MTCR LMMN0403*6R8MTCR LMMN0403*100MTCR LMMN0403*150MTCR LMMN0403*220MTCR LMMN0403*330MTCR LMMN0403*470MTCR LMMN0403*680MTCR LMMN0403*101MTCR LMMN0403*151MTCR LMMN0403*221MTCR LMMN0403*331MTCR LMMN0403*471MTCR L (μH) 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 68 100 150 220 330 470 Tolerance M M M M K, M K, M J, K J, K J, K J, K J, K J, K J, K J, K J, K J, K J, K Test Condition 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V DCR (Ω) max. 0.08 0.09 0.11 0.13 0.15 0.2 0.24 0.32 0.6 1 1.1 1.7 2.2 3.5 4 6.8 8.5 IDC1 (A) Typical 1.08 1 0.9 0.8 0.75 0.72 0.65 0.57 0.42 0.31 0.28 0.22 0.19 0.13 0.11 0.1 0.09 SRF (MHz) min 100 85 60 47 35 30 23 20 15 12 10 8.4 6.8 5.5 4.5 3.6 3 1 IDC: The current when the inductance becomes 10% lower than its initial value or the current when the temperature of the coil increases by 20°C. The smaller one is defined as the rated DC current. (Ta=25°C) * Inductance Tolerance: J=±5%, K=±10%, M=±20% 0605 (C) AVX PN LMMN0605MR12MTCS LMMN0605MR27MTCS LMMN0605MR47MTCS LMMN0605M1R0MTCS LMMN0605M1R5MTCS LMMN0605M2R2MTCS LMMN0605M3R3MTCS LMMN0605M4R7MTCS LMMN0605M6R8MTCS LMMN0605*100MTCS LMMN0605*150MTCS LMMN0605*220MTCS LMMN0605*330MTCS LMMN0605*470MTCS LMMN0605*680MTCS LMMN0605*101MTCS LMMN0605*151MTCS LMMN0605*221MTCS LMMN0605*331MTCS LMMN0605*471MTCS LMMN0605*681MTCS LMMN0605*102MTCS LMMN0605*222MTCS LMMN0605*472MTCS LMMN0605*103MTCS L (μH) 0.12 0.27 0.47 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 68 100 150 220 330 470 680 1000 2200 4700 10000 Tolerance M M M M M M M M M K, M K, M K, M K, M K, M K, M K, M K, M K, M K, M K, M K, M K, M K, M K, M K, M Test Condition 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 1MHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 100KHz, 0.1V 10KHz, 0.1V 10KHz, 0.1V 10KHz, 0.1V 10KHz, 0.1V DCR (Ω) max. 0.0098 0.014 0.0182 0.027 0.031 0.041 0.05 0.0574 0.104 0.13 0.21 0.266 0.448 0.56 0.938 1.204 2.66 3.36 6.16 7.56 11.34 14.42 30.1 61.04 140 IDC1 (A) Typical 6 5.3 4.8 4 3.7 3.2 2.9 2.7 2 1.7 1.4 1.2 0.9 0.8 0.64 0.56 0.42 0.32 0.27 0.24 0.19 0.15 0.1 0.07 0.05 SRF (MHz) min 450 300 200 150 110 80 40 30 25 20 17 15 12 10 ref 7.6 6.5 5 4 3.1 2.4 1.9 1.7 1.2 0.8 0.5 1 IDC: The current when the inductance becomes 10% lower than its initial value or the current when the temperature of the coil increases by 20°C. The smaller one is defined as the rated DC current. (Ta=25°C) * Inductance Tolerance: J=±5%, K=±10%, M=±20% 47 LMax SMD Power Inductor LMMN Series – Miniature Style M SHELF STORAGE SPECIFICATIONS Items Shelf Storage Conditions Specifications Temperature range: 25±3ºC • Humidity: <80% relative humidity. Recommendation: Product should be used within six months from the time of delivery. ENVIRONMENTAL SPECIFICATIONS Items Specification High Temperature Storage Test Low Temperature Storage Test No case deformation or change in appearance ΔL/L≤10% ΔQ/Q≤30% Humidity Test Thermal Shock Test Test Method/Conditions Temperature: 85±2ºC Time: 48±2 hours Tested after 1 hour at room temperature. Temperature: -25±2ºC Time: 48±2 hours Tested after 1 hour at room temperature. Temperature: 40±2ºC, 90~95% relative humidity Time: 96±2 hours Tested after 1 hour at room temperature. 1 Cycle: -25ºC for 30 minutes +25ºC for 10 minutes 85ºC for 30 minutes Go through 5 cycles. Tested after 1 hour at room temperature. MECHANICAL SPECIFICATIONS Items Solderability Test Resistance to solder heat Specification Terminal area must have 90% minimum solder coverage No case deformation or change in appearance. Vibration Test No case deformation or change in appearance ΔL/L≤10% ΔQ/Q≤30% Shock Resistance RELOW SOLDERING RECOMMENDATION TEMP ºC 245 220 Peak 265ºC 260ºC / 10S Heat-up rate ≈ 3K/s Cooling Rate ≈ 6K/s 180 150 Pre-heating Max 20S 90s ~ 120S Max 60S Time (Sec.) 48 Test Method/Conditions Lead-free termination: Dip pads in flux then dip in solder pot at 245±5ºC for 3 seconds. Flux should cover the whole of the sample before heating, then be preheated for about 2 minutes over temperature 130 – 150ºC. Immersing to 260±5ºC for 10 seconds. Apply frequency at 10 – 55 Hz. I.5mm amplitude in each of perpendicular direction for 2 hours. Drop down with 981m/s2 (100G) shock attitude upon a rubber block method shock testing machine – 1 time. In each three orientations. LMax SMD Power Inductor LMMN Series – Miniature Style M PACKAGING SPECIFICATIONS THE FORCE FOR TEARING OFF COVER TAPE IS 10 TO 60 GRAMS IN THE ARROW DIRECTION 165 TO 180º COVER TAPE LABEL CARRIER TAPE ELECTRODE DIRECTION OF EED REEL TAPE TRAILER 160 (6.299) MIN 1.50 +0.10 -0.00 1.75±0.10 (0.059 +0.004 -0.000 ) (0.069±0.004) 4.00±0.10 (0.157±0.004) INDUCTORS TAPE LEADER 388 (15.28) MIN COVER TAPE 250 (9.843) MIN P 330 (13.00) or 178 (7.000) W LABEL 2.50±0.50 (0.098±0.020) 120º Size Code 0202 02A2 02B2 0302 03A2 0403 0605 Tape Size (mm) W P 8 4 8 4 8 4 8 4 8 4 12 8 16 12 SPQ (pcs) 7" 13" 2000 – 2000 – 2000 – 2000 – 2000 – 500 – – 1000 M ZOO 13.0±1.00 (0.512±0.039) 23.0±1.00 (0.906±0.039) 49 LMax Low Profile Power Inductor LMLP Series – Style C FEATURES INDUCTANCE AND RATED CURRENT RANGES • Small and low profile inductor • It corresponds to high current • Simple and original magnetic shield structure APPLICATIONS •For small DC/DC converter (cellular phone, HDD, DVC, DSC, PDA, LCD display etc.) CHARACTERISTICS • Operating Temperature Range: -40°C to +125°C • Storage Temperature Range: -40°C to +85°C • Saturation Current: The saturation current value (lSAT) is the DC current value when the inductance decreases by 30% of it initial value (at 20ºC). • Temperature Rise Current: The temperature rise current value (IRMS) is the DC current value that increases component temperature by up to 40ºC. • 0202 • 0303 • 03A3 • 03B3 • 0404 • 04A4 • 04B4 • 0505 • 05B5 • 05D5 • 0606 • 06A6 • 06B6 • 06C6 • 06D6 • 0808 2.2 ~ 22μH 1.0 ~ 47μH 1.0 ~ 47μH 1.0 ~ 47μH 1.0 ~ 47μH 1.0 ~ 47μH 1.0 ~ 220μH 10μH 1.50 ~ 22.0μH 1.50 ~ 47.0μH 4.7 ~ 10.0μH 2.50 ~ 100μH 0.80 ~ 22.0μH 1.50 ~ 100μH 1.30 ~ 100μH 0.90 ~ 100μH 1.290 ~ 0.390A 1.30 ~ 0.220A 1.50 ~0.250A 2.10 ~ 0.320A 1.80 ~ 0.240A 2.50 ~ 0.350A 4.0 ~ 0.270A 1.00A 3.35 ~ 0.90A 6.00 ~ 1.10A 1.40 ~ 1.00A 2.10 ~ 0.35A 5.50 ~ 1.05A 5.00 ~ 0.62A 8.00 ~ 0.80A 11.0 ~ 1.00A DIMENSIONS A G C E B D E H F H PCB Pattern Type 0202 0303 03A3 03B3 0404 04A4 04B4 0505 05B5 05D5 0606 06A6 06B6 06C6 06D6 0808 50 A 2.40 ± 0.10 (0.095 ± 0.004) 3.00 ± 0.20 (0.118 ± 0.008) 3.00 ± 0.20 (0.118 ± 0.008) 3.00 ± 0.20 (0.118 ± 0.008) 4.00 ± 0.20 (0.157 ± 0.008) 4.00 ± 0.20 (0.157 ± 0.008) 4.00 ± 0.20 (0.157 ± 0.008) 5.00 ± 0.20 (0.197 ± 0.008) 5.00 ± 0.20 (0.197 ± 0.008) 5.00 ± 0.20 (0.197 ± 0.008) 6.00 ± 0.20 (0.236 ± 0.008) 6.00 ± 0.20 (0.236 ± 0.008) 6.00 ± 0.20 (0.236 ± 0.008) 6.00 ± 0.20 (0.236 ± 0.008) 6.00 ± 0.20 (0.236 ± 0.008) 8.00 ± 0.20 (0.315 ± 0.008) B 2.40 ± 0.10 (0.095 ± 0.004) 3.00 ± 0.20 (0.118 ± 0.008) 3.00 ± 0.20 (0.118 ± 0.008) 3.00 ± 0.20 (0.118 ± 0.008) 4.00 ± 0.20 (0.157 ± 0.008) 4.00 ± 0.20 (0.157 ± 0.008) 4.00 ± 0.20 (0.157 ± 0.008) 5.00 ± 0.20 (0.197 ± 0.008) 5.00 ± 0.20 (0.197 ± 0.008) 5.00 ± 0.20 (0.197 ± 0.008) 6.00 ± 0.20 (0.236 ± 0.008) 6.00 ± 0.20 (0.236 ± 0.008) 6.00 ± 0.20 (0.236 ± 0.008) 6.00 ± 0.20 (0.236 ± 0.008) 6.00 ± 0.20 (0.236 ± 0.008) 8.00 ± 0.20 (0.315 ± 0.008) C max 1.00 (0.039) 1.00 (0.039) 1.20 (0.047) 1.50 (0.059) 1.00 (0.039) 1.20 (0.047) 1.80 (0.071) 1.00 (0.039) 2.00 (0.078) 4.00 (0.157) 1.00 ± 0.10 (0.039 ± 0.004) 1.20 (0.047) 2.00 (0.078) 2.80 (0.110) 4.50 (0.177) 4.20 (0.165) D 1.45 ± 0.20 (0.057 ± 0.008) 1.90 ± 0.20 (0.075 ± 0.008) 1.90 ± 0.20 (0.075 ± 0.008) 1.90 ± 0.20 (0.075 ± 0.008) 2.50 ± 0.20 (0.099 ± 0.008) 2.50 ± 0.20 (0.099 ± 0.008) 2.50 ± 0.20 (0.099 ± 0.008) 3.50 ± 0.20 (0.138 ± 0.008) 3.50 ± 0.20 (0.138 ± 0.008) 3.50 ± 0.20 (0.138 ± 0.008) 4.00 ± 0.20 (0.157 ± 0.008) 4.00 ± 0.20 (0.157 ± 0.008) 4.00 ± 0.20 (0.157 ± 0.008) 4.00 ± 0.20 (0.157 ± 0.008) 4.00 ± 0.20 (0.157 ± 0.008) 5.60 ± 0.30 (0.220 ± 0.011) E 0.60 ± 0.20 (0.240 ± 0.008) 0.90 ± 0.20 (0.035 ± 0.008) 0.90 ± 0.20 (0.035 ± 0.008) 0.90 ± 0.20 (0.035 ± 0.008) 1.10 ± 0.20 (0.043 ± 0.008) 1.10 ± 0.20 (0.043 ± 0.008) 1.10 ± 0.20 (0.043 ± 0.008) 1.50 ± 0.20 (0.059 ± 0.008) 1.50 ± 0.20 (0.059 ± 0.008) 1.50 ± 0.20 (0.059 ± 0.008) 1.35 ± 0.20 (0.053 ± 0.008) 1.35 ± 0.20 (0.053 ± 0.008) 1.35 ± 0.20 (0.053 ± 0.008) 1.35 ± 0.20 (0.053 ± 0.008) 1.35 ± 0.20 (0.053 ± 0.008) 1.60 ± 0.30 (0.063 ± 0.011) F 1.45 (0.057) 2.20 (0.087) 2.20 (0.087) 2.20 (0.087) 2.80 (0.110) 2.80 (0.110) 2.80 (0.110) 3.80 (0.150) 3.80 (0.150) 3.80 (0.150) 4.70 (0.185) 4.70 (0.185) 4.70 (0.185) 4.70 (0.185) 4.70 (0.185) 5.60 (0.220) G 2.00 (0.079) 2.70 (0.106) 2.70 (0.106) 2.70 (0.106) 3.70 (0.146) 3.70 (0.146) 3.70 (0.146) 4.70 (0.185) 4.70 (0.185) 4.70 (0.185) 5.70 (0.224) 5.70 (0.224) 5.70 (0.224) 5.70 (0.224) 5.70 (0.224) 7.50 (0.188) mm (inches) H 0.70 (0.028) 0.80 (0.032) 0.80 (0.032) 0.80 (0.032) 1.20 (0.047) 1.20 (0.047) 1.20 (0.047) 1.60 (0.063) 1.60 (0.063) 1.60 (0.063) 1.60 (0.063) 1.60 (0.063) 1.60 (0.063) 1.60 (0.063) 1.60 (0.063) 1.80 (0.071) LMax Low Profile Power Inductor LMLP Series – Style C HOW TO ORDER LM LP Family LM = Power Inductor Series LP = Low Profile 0303 M R04 C T A S Size 0303 = 3x3xh 03A3 = 3x3xA(h) (h = see catalog) Tolerance M = 20% N = 30% Inductance R39 = 0.390μH 3R9 = 3.900μH 390 = 39.00μH 391 = 390.0μH Style Termination T = Sn Plate Special A = Standard Packaging R = 7" Reel S = 13" Reel ELECTRICAL CHARACTERISTICS 0202 AVX PN LMLP0202N2R2CTAR LMLP0202N3R3CTAR LMLP0202N4R7CTAR LMLP0202N6R8CTAR LMLP0202M100CTAR LMLP0202M150CTAR LMLP0202M220CTAR L (μH) at 100KHz 1.0V 2.2 3.3 4.7 6.8 10 15 22 Tolerance ISAT* (A) IRMS** (A) DCR ±20% (Ω) ±30% ±30% ±30% ±30% ±20% ±20% ±20% 1.29 1 0.88 0.75 0.55 0.47 0.39 0.97 0.77 0.67 0.57 0.45 0.37 0.3 0.15 0.22 0.29 0.41 0.69 1.02 1.47 Tolerance ISAT* (A) IRMS** (A) DCR ±20% (Ω) ±30% ±30% ±30% ±30% ±30% ±30% ±20% ±20% ±20% ±20% ±20% 1.3 1.2 1.1 0.87 0.75 0.61 0.5 0.4 0.35 0.26 0.22 1.4 1.3 1.1 0.94 0.78 0.63 0.51 0.4 0.35 0.275 0.235 0.065 0.08 0.095 0.14 0.19 0.3 0.45 0.74 1.03 1.55 2.05 Tolerance ISAT* (A) IRMS** (A) DCR ±20% (Ω) ±30% ±30% ±30% ±30% ±30% ±30% ±20% ±20% ±20% ±20% ±20% 1.5 1.36 1.1 0.91 0.77 0.67 0.54 0.44 0.37 0.31 0.25 1.49 1.4 1.2 1.05 0.98 0.74 0.63 0.485 0.42 0.33 0.28 0.05 0.06 0.08 0.1 0.13 0.19 0.29 0.45 0.63 1.03 1.45 0303 AVX PN LMLP0303N1R0CTAR LMLP0303N1R5CTAR LMLP0303N2R2CTAR LMLP0303N3R3CTAR LMLP0303N4R7CTAR LMLP0303N6R8CTAR LMLP0303M100CTAR LMLP0303M150CTAR LMLP0303M220CTAR LMLP0303M330CTAR LMLP0303M470CTAR L (μH) at 100KHz 1.0V 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 03A2 AVX PN LMLP03A2N1R0CTAR LMLP03A2N1R5CTAR LMLP03A2N2R2CTAR LMLP03A2N3R3CTAR LMLP03A2N4R7CTAR LMLP03A2N6R8CTAR LMLP03A2M100CTAR LMLP03A2M150CTAR LMLP03A2M220CTAR LMLP03A2M330CTAR LMLP03A2M470CTAR L (μH) at 100KHz 1.0V 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 *The saturation current value (lSAT) is the DC current value when the inductance decreases by 30% of it initial value (at 20ºC). **The temperature rise current value (IRMS) is the DC current value that increases component temperature by up to 40ºC. 51 LMax Low Profile Power Inductor LMLP Series – Style C 03B3 AVX PN LMLP03B3N1R0CTAR LMLP03B3N1R5CTAR LMLP03B3N2R2CTAR LMLP03B3N3R3CTAR LMLP03B3N4R7CTAR LMLP03B3N6R8CTAR LMLP03B3M100CTAR LMLP03B3M150CTAR LMLP03B3M220CTAR LMLP03B3M330CTAR LMLP03B3M470CTAR L (μH) at 100KHz 1.0V 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 Tolerance ISAT* (A) IRMS** (A) DCR ±20% (Ω) ±30% ±30% ±30% ±30% ±30% ±30% ±20% ±20% ±20% ±20% ±20% 2.1 1.8 1.48 1.21 1.02 0.87 0.7 0.56 0.47 0.39 0.32 2.1 1.82 1.5 1.23 1.04 0.88 0.71 0.56 0.47 0.37 0.3 0.03 0.04 0.06 0.08 0.12 0.16 0.23 0.36 0.52 0.84 1.34 Tolerance ISAT* (A) IRMS** (A) DCR ±20% (Ω) ±30% ±30% ±30% ±30% ±30% ±30% ±20% ±20% ±20% ±20% 1.8 1.15 1.1 0.9 0.74 0.56 0.47 0.36 0.28 0.24 1.05 0.89 0.82 0.75 0.62 0.6 0.51 0.4 0.3 0.28 0.1 0.15 0.18 0.21 0.3 0.38 0.51 0.87 1.54 1.81 Tolerance ISAT* (A) IRMS** (A) DCR ±20% (Ω) ±30% ±30% ±30% ±30% ±30% ±20% ±20% ±20% ±20% ±20% 2.5 1.65 1.2 1.05 0.9 0.74 0.56 0.51 0.4 0.35 1.5 1.2 0.98 0.96 0.84 0.77 0.6 0.54 0.42 0.37 0.06 0.09 0.13 0.14 0.18 0.24 0.4 0.48 0.81 1 0404 AVX PN LMLP0404N1R0CTAS LMLP0404N2R2CTAS LMLP0404N3R3CTAS LMLP0404N4R7CTAS LMLP0404N6R8CTAS LMLP0404N100CTAS LMLP0404M150CTAS LMLP0404M220CTAS LMLP0404M330CTAS LMLP0404M470CTAS L (μH) at 100KHz 1.0V 1.0 2.2 3.3 4.7 6.8 10 15 22 33 47 04A4 AVX PN LMLP04A4N1R0CTAS LMLP04A4N2R2CTAS LMLP04A4N3R3CTAS LMLP04A4N4R7CTAS LMLP04A4N6R8CTAS LMLP04A4M100CTAS LMLP04A4M150CTAS LMLP04A4M220CTAS LMLP04A4M330CTAS LMLP04A4M470CTAS L (μH) at 100KHz 1.0V 1.0 2.2 3.3 4.7 6.8 10 15 22 33 47 *The saturation current value (lSAT) is the DC current value when the inductance decreases by 30% of it initial value (at 20ºC). **The temperature rise current value (IRMS) is the DC current value that increases component temperature by up to 40ºC. 52 LMax Low Profile Power Inductor LMLP Series – Style C 04B4 AVX PN LMLP04B4N1R0CTAS LMLP04B4N2R2CTAS LMLP04B4N3R3CTAS LMLP04B4N4R7CTAS LMLP04B4N6R8CTAS LMLP04B4M100CTAS LMLP04B4M150CTAS LMLP04B4M220CTAS LMLP04B4M330CTAS LMLP04B4M470CTAS LMLP04B4M680CTAS LMLP04B4M101CTAS LMLP04B4M151CTAS LMLP04B4M221CTAS L (μH) at 100KHz 1.0V 1.0 2.2 3.3 4.7 6.8 10 15 22 33 47 68 100 150 220 Tolerance ISAT* (A) IRMS** (A) DCR ±20% (Ω) ±30% ±30% ±30% ±30% ±30% ±20% ±20% ±20% ±20% ±20% ±20% ±20% ±20% ±20% 4 2.7 2 1.7 1.45 1.2 0.94 0.8 0.65 0.57 0.47 0.4 0.31 0.27 1.83 1.44 1.23 1.2 1.06 0.84 0.65 0.59 0.49 0.42 0.32 0.27 0.22 0.17 0.03 0.06 0.07 0.09 0.11 0.18 0.28 0.36 0.53 0.65 1 1.5 2.5 4 Tolerance ISAT* (A) IRMS** (A) DCR ±20% (Ω) ±20% 1 0.94 0.48 Tolerance ISAT* (A) IRMS** (A) DCR ±20% (Ω) ±30% ±30% ±30% ±30% ±30% ±20% ±20% ±20% 3.35 2.9 2.4 2 1.6 1.3 1.1 0.9 3.2 2.9 2.4 2 1.65 1.45 1.2 1 0.026 0.035 0.048 0.06 0.09 0.12 0.165 0.26 Tolerance ISAT* (A) IRMS** (A) DCR ±20% (Ω) ±30% ±30% ±30% ±30% ±30% ±20% ±20% ±20% ±20% ±20% 6 4.6 3.8 3.3 2.6 2.3 2 1.6 1.3 1.1 3.6 3.5 3.3 3.1 2.3 2.1 1.8 1.4 1.2 0.9 0.02 0.022 0.027 0.029 0.049 0.056 0.08 0.126 0.18 0.31 0505 AVX PN LMLP0505M100CTAR L (μH) at 100KHz 1.0V 10 05B5 AVX PN LMLP05B5N1R5CTAR LMLP05B5N2R2CTAR LMLP05B5N3R3CTAR LMLP05B5N4R7CTAR LMLP05B5N6R8CTAR LMLP05B5M100CTAR LMLP05B5M150CTAR LMLP05B5M220CTAR L (μH) at 100KHz 1.0V 1.5 2.2 3.3 4.7 6.8 10 15 22 05D5 AVX PN LMLP05D5N1R5CTAS LMLP05D5N2R2CTAS LMLP05D5N3R3CTAS LMLP05D5N4R7CTAS LMLP05D5N6R8CTAS LMLP05D5M100CTAS LMLP05D5M150CTAS LMLP05D5M220CTAS LMLP05D5M330CTAS LMLP05D5M470CTAS L (μH) at 100KHz 1.0V 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 *The saturation current value (lSAT) is the DC current value when the inductance decreases by 30% of it initial value (at 20ºC). **The temperature rise current value (IRMS) is the DC current value that increases component temperature by up to 40ºC. 53 LMax Low Profile Power Inductor LMLP Series – Style C 0606 AVX PN LMLP0606N4R7CTAR LMLP0606N6R8CTAR LMLP0606M100CTAR L (μH) at 100KHz 1.0V 4.7 6.8 10 Tolerance ISAT* (A) IRMS** (A) DCR ±20% (Ω) ±30% ±30% ±20% 1.4 1.2 1 1.4 1 0.85 0.29 0.372 0.5 Tolerance ISAT* (A) IRMS** (A) DCR ±20% (Ω) ±30% ±30% ±30% ±30% ±20% ±20% ±20% ±20% ±20% ±20% ±20% 2.1 1.8 1.5 1.3 1 0.8 0.76 0.59 0.52 0.44 0.35 1.73 1.57 1.4 1.18 1 0.79 0.63 0.53 0.46 0.41 0.32 0.09 0.105 0.11 0.165 0.235 0.33 0.53 0.7 1.05 1.35 2.18 Tolerance ISAT* (A) IRMS** (A) DCR ±20% (Ω) ±30% ±30% ±30% ±30% ±30% ±30% ±20% ±20% 5.5 4 3.2 2.8 2.4 2 1.7 1.05 3.8 3.2 2.7 2.6 2 1.8 1.4 0.95 0.02 0.026 0.034 0.04 0.058 0.085 0.125 0.29 Tolerance ISAT* (A) IRMS** (A) DCR ±20% (Ω) ±30% ±30% ±30% ±30% ±30% ±20% ±20% ±20% ±20% ±20% ±20% ±20% 5 4.2 3.6 2.7 2.5 1.9 1.6 1.3 1.1 0.95 0.76 0.62 4.2 3.7 3.4 3 2.5 1.9 1.8 1.4 1.1 0.92 0.77 0.66 0.016 0.02 0.023 0.031 0.04 0.065 0.095 0.135 0.22 0.3 0.42 0.6 06A6 AVX PN LMLP06A6N2R5CTAR LMLP06A6N4R0CTAR LMLP06A6N5R0CTAR LMLP06A6N6R8CTAR LMLP06A6M100CTAR LMLP06A6M150CTAR LMLP06A6M220CTAR LMLP06A6M330CTAR LMLP06A6M470CTAR LMLP06A6M680CTAR LMLP06A6M101CTAR L (μH) at 100KHz 1.0V 2.5 4 5 6.8 10 15 22 33 47 68 100 06B6 AVX PN LMLP06B6N0R8CTAS LMLP06B6N1R5CTAS LMLP06B6N2R2CTAS LMLP06B6N3R3CTAS LMLP06B6N4R7CTAS LMLP06B6N6R8CTAS LMLP06B6M100CTAS LMLP06B6M220CTAS L (μH) at 100KHz 1.0V 0.8 1.5 2.2 3.3 4.7 6.8 10 22 06C6 AVX PN LMLP06C6N1R5CTAS LMLP06C6N2R2CTAS LMLP06C6N3R0CTAS LMLP06C6N4R7CTAS LMLP06C6N6R0CTAS LMLP06C6M100CTAS LMLP06C6M150CTAS LMLP06C6M220CTAS LMLP06C6M330CTAS LMLP06C6M470CTAS LMLP06C6M680CTAS LMLP06C6M101CTAS L (μH) at 100KHz 1.0V 1.5 2.2 3 4.7 6 10 15 22 33 47 68 100 *The saturation current value (lSAT) is the DC current value when the inductance decreases by 30% of it initial value (at 20ºC). **The temperature rise current value (IRMS) is the DC current value that increases component temperature by up to 40ºC. 54 LMax Low Profile Power Inductor LMLP Series – Style C 06D6 AVX PN LMLP06D6N1R3CTAS LMLP06D6N1R8CTAS LMLP06D6N2R3CTAS LMLP06D6N3R0CTAS LMLP06D6N4R5CTAS LMLP06D6N6R3CTAS LMLP06D6M100CTAS LMLP06D6M150CTAS LMLP06D6M220CTAS LMLP06D6M330CTAS LMLP06D6M470CTAS LMLP06D6M680CTAS LMLP06D6M101CTAS L (μH) at 100KHz 1.0V 1.3 1.8 2.3 3 4.5 6.3 10 15 22 33 47 68 100 Tolerance ISAT* (A) IRMS** (A) DCR ±20% (Ω) ±30% ±30% ±30% ±30% ±30% ±30% ±20% ±20% ±20% ±20% ±20% ±20% ±20% 8 7 6 5 4 3.8 3 2.3 1.9 1.5 1.3 1 0.8 4 3.7 3.5 3.2 3 2.8 2.5 1.9 1.5 1.4 1.1 0.9 0.7 0.016 0.018 0.021 0.024 0.031 0.038 0.047 0.077 0.115 0.145 0.22 0.33 0.5 Tolerance ISAT* (A) IRMS** (A) DCR ±20% (Ω) ±30% ±30% ±30% ±30% ±30% ±30% ±20% ±20% ±20% ±20% ±20% ±20% ±20% 11 9 7.4 5.3 4.7 4 3.4 2.7 2.2 1.9 1.5 1.2 1 7.8 7 6.3 4.9 4.1 3.7 3.1 2.4 2.2 1.7 1.4 1.1 1 0.006 0.007 0.009 0.015 0.018 0.025 0.034 0.05 0.066 0.1 0.15 0.23 0.29 0808 AVX PN LMLP0808N0R9CTAS LMLP0808N1R4CTAS LMLP0808N2R0CTAS LMLP0808N3R6CTAS LMLP0808N4R7CTAS LMLP0808N6R8CTAS LMLP0808M100CTAS LMLP0808M150CTAS LMLP0808M220CTAS LMLP0808M330CTAS LMLP0808M470CTAS LMLP0808M680CTAS LMLP0808M101CTAS L (μH) at 100KHz 1.0V 0.9 1.4 2 3.6 4.7 6.8 10 15 22 33 47 68 100 *The saturation current value (lSAT) is the DC current value when the inductance decreases by 30% of it initial value (at 20ºC). **The temperature rise current value (IRMS) is the DC current value that increases component temperature by up to 40ºC. RECOMMENDED REFLOW PROFILE 5s Max. 260 Peak: 250 +5/-0 ºC 240 230ºC Min. 220 Temperature (Cº) 30 ± 10 s 200 150 ~ 180ºC 180 160 140 120 90 ± 30 s 100 80 *Temperature on surface of circuit board. Time(s) The products may be exposed to reflow soldering process of above profile tup to two times. 55 LMax Low Profile Power Inductor LMLP Series – Style C TEST CONDITIONS ITEM Temperature Range Appearance Core Chipping Void Appearance Exposed Electrode Appearance Criterion for Exposed Wire Solderability SPECIFICATION DESCRIPTION Operation temp.:-40ºC ~ +125℃(Including self-generated heat) Storage temp.: -40ºC ~ +85ºC No defects or abnormalities. The appearance standard of the chipping size in top side, of bottom side ferrite core is following dimension. L: 0.5 mm (max) W: 0.5 mm (max) Size of voids occurring to coating resin is specified as following. 1. Width direction (dimension a): acceptable when a ⬉w/2 nonconforming when a > w/2 2. Length direction (dimension b): it is not specified. 3. When total area of voids(including one exposing coil) occurring to each sides is not greater than 50% of coating resin area that is acceptable <Cross section of wire joint part> Conforming Less than 1/2 of joint side Lenght (More than 1/2 is selected as defect Wire is soldered insufficiently and less than half of outer diameter is covered with solder. Terminal Strength No detachment of terminal pin and no breakage of wire Thermal Shock Inductance change: within ± 10% without mechanical damage such as break High Temperature Resistance Inductance change: within ± 10% without mechanical damage such as break Humidity Resistance Inductance change: within ± 10% without mechanical damage such as break Low Temperature Storage Inductance change: within ± 10% without mechanical damage such as break High Temperature Storage Inductance change: within ± 10% without mechanical damage such as break 56 Visual inspection Using calipers Using calipers Visual inspection Only top side of wire exposed. (regardlesss of whole top side of wire exposed) Inductance change: within ± 10% without mechanical damage such as break DC Resistance – <Appearance judgement> Vibration Inductance TEST METHOD a. Temperature: 25 ± 3ºC b. Relative Humidity: 45 to 75%RH c. Measuring equipment: Current measure: Chroma 3302 + Chroma 1320 Measuring instrument: Chroma A165022 Solder heat proof: 1. Preheating: 160±10ºC 90s 2. Retention time: 245±5ºC for 3 ± 1 sec 1. Vibration frequency: (10Hz to 55Hz to 10Hz) in 60 sec. as a period 2. Vibration time: period cycled for 2 hr in each of 3 mutual perpendicular directions 3. Amplitude: 1.5mm max. Add static load 4.9N(500gf) to inductor through hole of test board for 10 ± 2 sec 1. Repeat 100 cycles as follow: (-40ºC ± 2ºC, 30 ± 3 minutes) ➞ (room temperature , 5 minutes) ➞ (+125ºC ± 2ºC, 30 ± 3 minutes) ➞ (room temperature , 5 minutes) 2. Recovery: 48 +4/-0 hours of recovery under the standard condition after the test. 1. Environment condition: 85ºC ± 2ºC 2. Applied current: rated current 3. Duration: 500 +4/-0 hours 1. Environment condition: 60ºC ± 2ºC 2. Humidity: 90~95% 3. Applied current: rated current 4. Duration: 500 +4/-0 hours Store temperature: -40ºC ± 2ºC for total 500 +4/-0 hours Store temperature: +125ºC ± 2ºC for total 500 +4/-0 hours Within specified tolerance In accordance with electrical specification. LMax Low Profile Power Inductor LMLP Series – Style C PACKAGING SPECIFICATIONS – CARRIER TAPE DIMENSIONS 4.00±0.10 2.00±0.05 1.75±0.10 T Ø1.50 +0.1 -0.0 P A K W F B Ø1.00 mm (inches) AVX PN A B P F W T K LMLP0202****CTAR 2.6 ± 0.1 (0.102 ± 0.004) 3.2 ± 0.1 (0.126 ± 0.004) 3.2 ± 0.1 (0.126 ± 0.004) 3.2 ± 0.1 (0.126 ± 0.004) 4.3 ± 0.1 (0.169 ± 0.004) 4.3 ± 0.1 (0.169 ± 0.004) 4.3 ± 0.1 (0.169 ± 0.004) 5.25 ± 0.1 (0.207 ± 0.004) 5.25 ± 0.1 (0.207 ± 0.004) 5.15 ± 0.1 (0.203 ± 0.004) 6.3 ± 0.1 (0.248 ± 0.004) 6.3 ± 0.1 (0.248 ± 0.004) 6.3 ± 0.1 (0.248 ± 0.004) 6.3 ± 0.1 (0.248 ± 0.004) 6.3 ± 0.1 (0.248 ± 0.004) 8.3 ± 0.1 (0.327 ± 0.004) 2.6 ± 0.1 (0.102 ± 0.004) 3.2 ± 0.1 (0.126 ± 0.004) 3.2 ± 0.1 (0.126 ± 0.004) 3.2 ± 0.1 (0.126 ± 0.004) 4.3 ± 0.1 (0.169 ± 0.004) 4.3 ± 0.1 (0.169 ± 0.004) 4.3 ± 0.1 (0.169 ± 0.004) 5.25 ± 0.1 (0.207 ± 0.004) 5.25 ± 0.1 (0.207 ± 0.004) 5.15 ± 0.1 (0.203 ± 0.004) 6.3 ± 0.1 (0.248 ± 0.004) 6.3 ± 0.1 (0.248 ± 0.004) 6.3 ± 0.1 (0.248 ± 0.004) 6.3 ± 0.1 (0.248 ± 0.004) 6.3 ± 0.1 (0.248 ± 0.004) 8.3 ± 0.1 (0.327 ± 0.004) 4 ± 0.1 (0.157±0.004) 4.0 ± 0.1 (0.157 ± 0.004) 4.0 ± 0.1 (0.157 ± 0.004) 4.0 ± 0.1 (0.157 ± 0.004) 8.0 ± 0.1 (0.315 ± 0.004) 8.0 ± 0.1 (0.315 ± 0.004) 8.0 ± 0.1 (0.315 ± 0.004) 8.0 ± 0.1 (0.315 ± 0.004) 8.0 ± 0.1 (0.315 ± 0.004) 8.0 ± 0.1 (0.315 ± 0.004) 8.0 ± 0.1 (0.315 ± 0.004) 8.0 ± 0.1 (0.315 ± 0.004) 8.0 ± 0.1 (0.315 ± 0.004) 8.0 ± 0.1 (0.315 ± 0.004) 8.0 ± 0.1 (0.315 ± 0.004) 12.0 ± 0.1 (0.472 ± 0.004) 3.5 ± 0.1 (0.138 ± 0.004) 3.5 ± 0.1 (0.138 ± 0.004) 3.5 ± 0.1 (0.138 ± 0.004) 3.5 ± 0.1 (0.138 ± 0.004) 5.5 ± 0.1 (0.217 ± 0.004) 5.5 ± 0.1 (0.217 ± 0.004) 5.5 ± 0.1 (0.217 ± 0.004) 5.5 ± 0.1 (0.217 ± 0.004) 5.5 ± 0.1 (0.217 ± 0.004) 5.5 ± 0.1 (0.217 ± 0.004) 5.5 ± 0.1 (0.217 ± 0.004) 5.5 ± 0.1 (0.217 ± 0.004) 5.5 ± 0.1 (0.217 ± 0.004) 5.5 ± 0.1 (0.217 ± 0.004) 5.5 ± 0.1 (0.217 ± 0.004) 7.5 ± 0.1 (0.295 ± 0.004) 8.0 ± 0.2 (0.315 ± 0.008) 8.0 ± 0.2 (0.315 ± 0.008) 8.0 ± 0.2 (0.315 ± 0.008) 8.0 ± 0.2 (0.315 ± 0.008) 12.0 ± 0.3 (0.472 ± 0.012) 12.0 ± 0.3 (0.472 ± 0.012) 12.0 ± 0.3 (0.472 ± 0.012) 12.0 ± 0.3 (0.472 ± 0.012) 12.0 ± 0.3 (0.472 ± 0.012) 12.0 ± 0.3 (0.472 ± 0.012) 12.0 ± 0.3 (0.472 ± 0.012) 12.0 ± 0.3 (0.472 ± 0.012) 12.0 ± 0.3 (0.472 ± 0.012) 12.0 ± 0.3 (0.472 ± 0.012) 12.0 ± 0.3 (0.472 ± 0.012) 16.0 ± 0.3 (0.630 ± 0.012) 0.25 ± 0.05 (0.009 ± 0.002) 0.3 ± 0.05 (0.012 ± 0.002) 0.3 ± 0.05 (0.012 ± 0.002) 0.3 ± 0.05 (0.012 ± 0.002) 0.3 ± 0.1 (0.012 ± 0.004) 0.3 ± 0.1 (0.012 ± 0.004) 0.3 ± 0.1 (0.012 ± 0.004) 0.3 ± 0.1 (0.012 ± 0.004) 0.3 ± 0.1 (0.012 ± 0.004) 0.4 ± 0.1 (0.016 ± 0.004) 0.4 ± 0.1 (0.016 ± 0.004) 0.4 ± 0.1 (0.016 ± 0.004) 0.4 ± 0.1 (0.016 ± 0.004) 0.4 ± 0.1 (0.016 ± 0.004) 0.4 ± 0.1 (0.016 ± 0.004) 0.5 ± 0.1 (0.020 ± 0.004) 1.3 ± 0.1 (0.051 ± 0.004) 1.4 ± 0.1 (0.055 ± 0.004) 1.6 ± 0.1 (0.063 ± 0.004) 1.9 ± 0.1 (0.075 ± 0.004) 1.4 ± 0.1 (0.055 ± 0.004) 1.6 ± 0.1 (0.063 ± 0.004) 2.1 ± 0.1 (0.083 ± 0.004) 1.4 ± 0.1 (0.055 ± 0.004) 2.3 ± 0.1 (0.091 ± 0.004) 4.2 ± 0.1 (0.165 ± 0.004) 1.4 ± 0.1 (0.055 ± 0.004) 1.6 ± 0.1 (0.063 ± 0.004) 2.3 ± 0.1 (0.091 ± 0.004) 3.1 ± 0.1 (0.122 ± 0.004) 4.7 ± 0.1 (0.185 ± 0.004) 4.5 ± 0.1 (0.177 ± 0.004) LMLP0303****CTAR LMLP03A3****CTAR LMLP03B3****CTAR LMLP0404****CTAS LMLP04A4****CTAS LMLP04B4****CTAS LMLP0505****CTAR LMLP05B5****CTAR LMLP05D5****CTAS LMLP0606****CTAR LMLP06A6****CTAR LMLP06B6****CTAS LMLP06C6****CTAS LMLP06D6****CTAS LMLP0808****CTAS Reel Size SPQ 7" 2500 7" 2000 7" 2000 7" 2000 13" 5000 13" 4500 13" 3500 7" 1000 7" 800 13" 1500 7" 1000 7" 1000 13" 2500 13" 2000 13" 1500 13" 1000 PACKAGING SPECIFICATIONS – REEL DIMENSIONS T1 2.0±0.50 P D Code D P 7" Reel 180±1.50 62.0±1.50 13" Reel 330±1.50 100±1.50 21.0±0.80 13.0±0.50 T2 57 LMax Low Profile/High Current Power Inductor LMLP Series – Style D FEATURES INDUCTANCE AND RATED CURRENT RANGES • Shielded Construction • Large Current Rating • Lower Temperature Rise • Low Profile • Available on tape and reel • 0405 • 05A6 • 0506 • 0707 • 07A7 • 07B7 • 07C7 • 1011 • 13A3 • 1313 • 13B3 APPLICATIONS • Personal Computers • Servers • High Current POL Converters • Low Profile High Current Power Supplies • DC/DC Converters • DC/DC Converters for FPGA 0.1 μH ~ 3.3 μH 0.1 μH ~ 4.7 μH 0.1 μH ~ 4.7 μH 0.1 μH ~ 4.7 μH 0.1 μH ~ 10 μH 0.1 μH ~ 10 μH 0.56 μH ~ 10 μH 0.19 μH ~ 47 μH 0.1 μH ~ 10 μH 0.1 μH ~ 10 μH 0.1 μH ~ 10 μH 22 ~ 4 A 45 ~ 5 A 27 ~ 8.2 A 40 ~ 8 A 50 ~ 7 A 60 ~ 7 A 12 ~ 4.5 A 90 ~ 3 A 84 ~ 14 A 118 ~ 16 A 120 ~ 15.5 A • All test data taken at 25ºC • Operating Temperature Range: -55°C ~ +155°C • ISAT: The current that causes an inductance drop of approximately 25% (30% on 0405 size). • IDC: DC Current that causes an approximate ΔT of 40ºC. DIMENSIONS D B C F G F E A H Recommended Land Pattern mm (inches) Type 0405 05A6 0506 0707 07B7 07A7 07C7 1011 13A3 1313 13B3 58 A 4.10±0.50 (0.161±0.020) 5.00±0.50 (0.197±0.020) 5.00±0.50 (0.197±0.020) 6.80 max (0.278 max) 6.80 max (0.278 max) 6.80 max (0.278 max) 6.80 max (0.278 max) 10.4 max (0.409 max) 13.0 max (0.512 max) 13.0 max (0.512 max) 13.0 max (0.512 max) B 4.50±0.50 (0.177±0.020) 5.50±0.50 (0.217±0.020) 5.50±0.50 (0.217±0.020) 7.50 max (0.295 max) 7.50 max (0.295 max) 7.50 max (0.295 max) 7.50 max (0.295 max) 11.5 max (0.453 max) 14.2 max (0.559 max) 14.2 max (0.559 max) 14.2 max (0.559 max) C 2.10 (0.083) 2.00 (0.083) 3.00 (0.118) 2.00 (0.083) 2.50 (0.098) 3.00 (0.118) 5.00 (0.197) 4.00 (0.157) 4.00 (0.157) 5.00 (0.197) 6.50 (0.256) D 0.80±0.50 (0.031±0.020) 1.20±0.50 (0.047±0.020) 1.20±0.50 (0.047±0.020) 1.60±0.50 (0.063±0.020) 1.60±0.50 (0.063±0.020) 1.60±0.50 (0.063±0.020) 1.60±0.50 (0.063±0.020) 2.00±0.50 (0.079±0.020) 2.30±0.50 (0.091±0.020) 2.30±0.50 (0.091±0.020) 2.30±0.50 (0.091±0.020) E 1.50±0.50 (0.059±0.020) 1.50±0.50 (0.059±0.020) 1.50±0.50 (0.059±0.020) 2.90±0.50 (0.114±0.020) 2.90±0.50 (0.114±0.020) 2.90±0.50 (0.114±0.020) 2.90±0.50 (0.114±0.020) 2.90±0.50 (0.114±0.020) 3.80±0.50 (0.150±0.020) 3.80±0.50 (0.150±0.020) 3.80±0.50 (0.150±0.020) F 1.50 (0.059) 2.00 (0.079) 2.00 (0.079) 2.50 (0.098) 2.50 (0.098) 2.50 (0.098) 2.50 (0.098) 3.50 (0.138) 2.90 (0.114) 2.90 (0.114) 2.90 (0.114) G 2.50 (0.098) 3.00 (0.118) 3.00 (0.118) 3.70 (0.146) 3.70 (0.146) 3.70 (0.146) 3.70 (0.146) 6.00 (0.236) 7.90 (0.311) 7.90 (0.311) 7.90 (0.311) H 2.20 (0.087) 2.50 (0.098) 2.50 (0.098) 3.50 (0.138) 3.50 (0.138) 3.50 (0.138) 3.50 (0.138) 4.00 (0.157) 5.00 (0.197) 5.00 (0.197) 5.00 (0.197) LMax Low Profile/High Current Power Inductor LMLP Series – Style D HOW TO ORDER LM LP Family LM = Power Inductor Series LP = Low Profile 0707 M R04 D T A S Size 0707 = 7x7xh 07A7 = 7x7xA(h) (h = see catalog) Tolerance M = 20% Inductance R39 = 0.390μH 3R9 = 3.900μH 390 = 39.00μH 391 = 390.0μH Style Termination T = Sn Plate Special A = Standard Packaging S = 13" Reel ELECTRICAL CHARACTERISTICS 0405 AVX PN LMLP0405MR10DTAS LMLP0405MR22DTAS LMLP0405MR47DTAS LMLP0405MR56DTAS LMLP0405M1R0DTAS LMLP0405M1R5DTAS LMLP0405M2R2DTAS LMLP0405M3R3DTAS Inductance (μH) 0.1 0.22 0.47 0.56 1 1.5 2.2 3.3 Tolerance ±20% ±20% ±20% ±20% ±20% ±20% ±20% ±20% Test Condition 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 0.25V 0.25V 0.25V 0.25V 0.25V 0.25V 0.25V 0.25V DCR (mΩ) ISAT (A) IDC (A) 4 6.6 14 16 27 46 58 87 22 12.5 9.5 8.5 7 6 5 4 12 9 7 6.5 4.5 4 3 2.5 DCR (mΩ) ISAT (A) IDC (A) 3.9 5.2 8.2 9.4 12.4 20 50.1 85.5 116.6 45 22 25 21 15 16 12.5 8.5 5 17 15 12 11.5 10 7 4.2 3.3 2.8 DCR (mΩ) ISAT (A) IDC (A) 3.16 4.52 5.56 7.04 8.96 11.9 13.7 20.7 29.2 54.7 77.5 27 21 19 16 13.5 13 12 11 10 8.5 8.2 23 15.5 13.7 12.2 10.2 9.3 9.2 7.2 5.8 5 3.5 05A6 AVX PN LMLP05A6MR10DTAS LMLP05A6MR22DTAS LMLP05A6MR33DTAS LMLP05A6MR47DTAS LMLP05A6MR68DTAS LMLP05A6M1R0DTAS LMLP05A6M2R2DTAS LMLP05A6M3R3DTAS LMLP05A6M4R7DTAS Inductance (μH) 0.1 0.22 0.33 0.47 0.68 1 2.2 3.3 4.7 Tolerance ±20% ±20% ±20% ±20% ±20% ±20% ±20% ±20% ±20% Test Condition 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 0.25V 0.25V 0.25V 0.25V 0.25V 0.25V 0.25V 0.25V 0.25V 0506 AVX PN LMLP0506MR10DTAS LMLP0506MR22DTAS LMLP0506MR33DTAS LMLP0506MR47DTAS LMLP0506MR68DTAS LMLP0506MR82DTAS LMLP0506M1R0DTAS LMLP0506M1R5DTAS LMLP0506M2R2DTAS LMLP0506M3R3DTAS LMLP0506M4R7DTAS Inductance (μH) 0.1 0.22 0.33 0.47 0.68 0.82 1 1.5 2.2 3.3 4.7 Tolerance ±20% ±20% ±20% ±20% ±20% ±20% ±20% ±20% ±20% ±20% ±20% Test Condition 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 0.25V 0.25V 0.25V 0.25V 0.25V 0.25V 0.25V 0.25V 0.25V 0.25V 0.25V ISAT: The current that causes an inductance drop of approximately 25% (30% on 0405 size). IDC: DC Current that causes an approximate ΔT of 40ºC. 59 LMax Low Profile/High Current Power Inductor LMLP Series – Style D 0707 AVX PN LMLP0707MR10DTAS LMLP0707MR15DTAS LMLP0707MR22DTAS LMLP0707MR33DTAS LMLP0707MR47DTAS LMLP0707MR68DTAS LMLP0707MR82DTAS LMLP0707M1R0DTAS LMLP0707M1R5DTAS LMLP0707M2R2DTAS LMLP0707M3R3DTAS LMLP0707M4R7DTAS Inductance (μH) 0.1 0.15 0.22 0.33 0.47 0.68 0.82 1 1.5 2.2 3.3 4.7 Tolerance ±20% ±20% ±20% ±20% ±20% ±20% ±20% ±20% ±20% ±20% ±20% ±20% Test Condition 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 0.25V 0.25V 0.25V 0.25V 0.25V 0.25V 0.25V 0.25V 0.25V 0.25V 0.25V 0.25V DCR (mΩ) ISAT (A) IDC (A) 3.5 5.2 5.7 7 9.3 13.9 15.9 18.3 34 46 60.1 78 40 38 26 18 18 17 17 14 11.5 13 10 8 18 15 14 12 11 9 8 7 4 3.75 3.25 3 DCR (mΩ) ISAT (A) IDC (A) 1.7 3.2 4.1 6.5 9.4 11.8 14.2 21.2 34 51.6 63 95 106 129 50 34 22 21 18 17 16 15 14 13 10 9 8 7 30 21 18 13.5 11 10 9 7.5 6.5 5 4.5 3.5 3 2.5 DCR (mΩ) ISAT (A) IDC (A) 1.7 2.8 3.9 4.2 5.5 8 10 15 20 30 40 60 68 105 60 40 30 26 25 24 22 18 14 13.5 10 8 7.5 7 32.5 23 20 17.5 15.5 13 11 9 8 6 5.5 4.5 4 3 07B7 AVX PN LMLP07B7MR10DTAS LMLP07B7MR22DTAS LMLP07B7MR33DTAS LMLP07B7MR47DTAS LMLP07B7MR68DTAS LMLP07B7MR82DTAS LMLP07B7M1R0DTAS LMLP07B7M1R5DTAS LMLP07B7M2R2DTAS LMLP07B7M3R3DTAS LMLP07B7M4R7DTAS LMLP07B7M6R8DTAS LMLP07B7M8R2DTAS LMLP07B7M100DTAS Inductance (μH) 0.1 0.22 0.33 0.47 0.68 0.82 1 1.5 2.2 3.3 4.7 6.8 8.2 10 Tolerance ±20% ±20% ±20% ±20% ±20% ±20% ±20% ±20% ±20% ±20% ±20% ±20% ±20% ±20% Test Condition 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 0.25V 0.25V 0.25V 0.25V 0.25V 0.25V 0.25V 0.25V 0.25V 0.25V 0.25V 0.25V 0.25V 0.25V 07A7 AVX PN LMLP07A7MR10DTAS LMLP07A7MR22DTAS LMLP07A7MR33DTAS LMLP07A7MR47DTAS LMLP07A7MR68DTAS LMLP07A7MR82DTAS LMLP07A7M1R0DTAS LMLP07A7M1R5DTAS LMLP07A7M2R2DTAS LMLP07A7M3R3DTAS LMLP07A7M4R7DTAS LMLP07A7M6R8DTAS LMLP07A7M8R2DTAS LMLP07A7M100DTAS Inductance (μH) 0.1 0.22 0.33 0.47 0.68 0.82 1 1.5 2.2 3.3 4.7 6.8 8.2 10 Tolerance ±20% ±20% ±20% ±20% ±20% ±20% ±20% ±20% ±20% ±20% ±20% ±20% ±20% ±20% ISAT: The current that causes an inductance drop of approximately 25%. IDC: DC Current that causes an approximate ΔT of 40ºC. 60 Test Condition 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 0.25V 0.25V 0.25V 0.25V 0.25V 0.25V 0.25V 0.25V 0.25V 0.25V 0.25V 0.25V 0.25V 0.25V LMax Low Profile/High Current Power Inductor LMLP Series – Style D 07C7 AVX PN LMLP07C7MR56DTAS LMLP07C7MR68DTAS LMLP07C7MR82DTAS LMLP07C7M1R0DTAS LMLP07C7M1R5DTAS LMLP07C7M2R2DTAS LMLP07C7M3R3DTAS LMLP07C7M4R7DTAS LMLP07C7M5R6DTAS LMLP07C7M6R8DTAS LMLP07C7M8R2DTAS LMLP07C7M100DTAS Inductance (μH) 0.56 0.68 0.82 1 1.5 2.2 3.3 4.7 5.6 6.8 8.2 10 Tolerance ±20% ±20% ±20% ±20% ±20% ±20% ±20% ±20% ±20% ±20% ±20% ±20% Test Condition 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 0.25V 0.25V 0.25V 0.25V 0.25V 0.25V 0.25V 0.25V 0.25V 0.25V 0.25V 0.25V DCR (mΩ) ISAT (A) IDC (A) 3.6 4.5 4.9 6.5 9 13.6 20.9 30.3 34.4 44.6 50.7 71.3 12 11.5 13 15 12 10 8 7 7 5.5 5 4.5 20 18 16.5 13 12 10 8 6.5 6 5.5 5 4.5 DCR (mΩ) ISAT (A) IDC (A) 0.95 1.4 1.6 1.8 4.1 5.8 9 11.8 16.5 19.3 23.3 36.5 65 120 200 210 90 60 38 49 36 27.5 25.6 18.6 17 16 13.5 12 7 3 2.8 3 40 31.5 26 27.5 17.5 15 12 10 9.5 8.5 8 6.8 3.5 2 1.8 1.2 DCR (mΩ) ISAT (A) IDC (A) 0.96 1.2 1.3 1.5 2 2.2 2.5 3 3.5 5.5 7 8 12 15 19 22 28 34 84 75 65 62 55 51 49 44 40 35 30 29 27 24 19 18 16 14 43 41 38.5 36.5 32 29 28 25 24 19 16.5 16 12 10 9.5 9 8.5 7 1011 AVX PN LMLP1011MR19DTAS LMLP1011MR36DTAS LMLP1011MR47DTAS LMLP1011MR56DTAS LMLP1011M1R0DTAS LMLP1011M1R5DTAS LMLP1011M2R2DTAS LMLP1011M3R3DTAS LMLP1011M4R7DTAS LMLP1011M5R6DTAS LMLP1011M6R8DTAS LMLP1011M100DTAS LMLP1011M150DTAS LMLP1011M220DTAS LMLP1011M330DTAS LMLP1011M470DTAS Inductance (μH) 0.19 0.36 0.47 0.56 1 1.5 2.2 3.3 4.7 5.6 6.8 10 15 22 33 47 Tolerance ±20% ±20% ±20% ±20% ±20% ±20% ±20% ±20% ±20% ±20% ±20% ±20% ±20% ±20% ±20% ±20% Test Condition 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 0.25V 0.25V 0.25V 0.25V 0.25V 0.25V 0.25V 0.25V 0.25V 0.25V 0.25V 0.25V 0.25V 0.25V 0.25V 0.25V 13A3 AVX PN LMLP13A3MR10DTAS LMLP13A3MR15DTAS LMLP13A3MR22DTAS LMLP13A3MR33DTAS LMLP13A3MR47DTAS LMLP13A3MR60DTAS LMLP13A3MR68DTAS LMLP13A3MR82DTAS LMLP13A3M1R0DTAS LMLP13A3M1R5DTAS LMLP13A3M1R8DTAS LMLP13A3M2R2DTAS LMLP13A3M3R3DTAS LMLP13A3M4R7DTAS LMLP13A3M5R6DTAS LMLP13A3M6R8DTAS LMLP13A3M8R2DTAS LMLP13A3M100DTAS Inductance (μH) 0.1 0.15 0.22 0.33 0.47 0.6 0.68 0.82 1 1.5 1.8 2.2 3.3 4.7 5.6 6.8 8.2 10 Tolerance ±20% ±20% ±20% ±20% ±20% ±20% ±20% ±20% ±20% ±20% ±20% ±20% ±20% ±20% ±20% ±20% ±20% ±20% Test Condition 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 0.25V 0.25V 0.25V 0.25V 0.25V 0.25V 0.25V 0.25V 0.25V 0.25V 0.25V 0.25V 0.25V 0.25V 0.25V 0.25V 0.25V 0.25V ISAT: The current that causes an inductance drop of approximately 25%. IDC: DC Current that causes an approximate ΔT of 40ºC. 61 LMax Low Profile/High Current Power Inductor LMLP Series – Style D 1313 AVX PN LMLP1313MR10DTAS LMLP1313MR22DTAS LMLP1313MR33DTAS LMLP1313MR47DTAS LMLP1313MR56DTAS LMLP1313MR68DTAS LMLP1313MR82DTAS LMLP1313M1R0DTAS LMLP1313M1R5DTAS LMLP1313M1R8DTAS LMLP1313M2R2DTAS LMLP1313M3R3DTAS LMLP1313M4R7DTAS LMLP1313M5R6DTAS LMLP1313M6R8DTAS LMLP1313M7R8DTAS LMLP1313M8R2DTAS LMLP1313M100DTAS Inductance (μH) 0.1 0.22 0.33 0.47 0.56 0.68 0.82 1 1.5 1.8 2.2 3.3 4.7 5.6 6.8 7.8 8.2 10 Tolerance ±20% ±20% ±20% ±20% ±20% ±20% ±20% ±20% ±20% ±20% ±20% ±20% ±20% ±20% ±20% ±20% ±20% ±20% Test Condition 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 0.25V 0.25V 0.25V 0.25V 0.25V 0.25V 0.25V 0.25V 0.25V 0.25V 0.25V 0.25V 0.25V 0.25V 0.25V 0.25V 0.25V 0.25V DCR (mΩ) ISAT (A) IDC (A) 6 0.8 1.1 1.3 1.5 1.7 2.3 2.5 4.1 4.9 5.5 9.2 15 16.5 18.5 20.5 22.5 25.5 118 110 80 65 55 54 53 50 48 40 32 32 27 22 21 18 18 16 55 51 42 38 36 34 31 29 23 19 20 15 12 11.5 11 10 9.5 9 DCR (mΩ) ISAT (A) IDC (A) 0.5 0.6 0.7 0.8 0.9 1 1.2 1.4 1.6 1.9 2 2.5 3 3.2 4.2 6.8 8.7 10 14 15.5 17.2 120 118 112 72 65 64 63 62 60 50 49 48 45 41 40 35 32 32 16.5 16 15.5 60 55 53 48 46 44 41 37 35 33 32 30 27 24 22 18 13.5 13.5 11.5 10.5 10 13B3 AVX PN LMLP13B3MR10DTAS LMLP13B3MR15DTAS LMLP13B3MR22DTAS LMLP13B3MR30DTAS LMLP13B3MR33DTAS LMLP13B3MR40DTAS LMLP13B3MR47DTAS LMLP13B3MR56DTAS LMLP13B3MR68DTAS LMLP13B3MR82DTAS LMLP13B3M1R0DTAS LMLP13B3M1R2DTAS LMLP13B3M1R5DTAS LMLP13B3M1R8DTAS LMLP13B3M2R2DTAS LMLP13B3M3R3DTAS LMLP13B3M4R7DTAS LMLP13B3M5R6DTAS LMLP13B3M6R8DTAS LMLP13B3M8R2DTAS LMLP13B3M100DTAS Inductance (μH) 0.1 0.15 0.22 0.3 0.33 0.4 0.47 0.56 0.68 0.82 1 1.2 1.5 1.8 2.2 3.3 4.7 5.6 6.8 8.2 10 Tolerance ±20% ±20% ±20% ±20% ±20% ±20% ±20% ±20% ±20% ±20% ±20% ±20% ±20% ±20% ±20% ±20% ±20% ±20% ±20% ±20% ±20% ISAT: The current that causes an inductance drop of approximately 25%. IDC: DC Current that causes an approximate ΔT of 40ºC. 62 Test Condition 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 100KHz, 0.25V 0.25V 0.25V 0.25V 0.25V 0.25V 0.25V 0.25V 0.25V 0.25V 0.25V 0.25V 0.25V 0.25V 0.25V 0.25V 0.25V 0.25V 0.25V 0.25V 0.25V LMax Low Profile/High Current Power Inductor LMLP Series – Style D GENERAL CHARACTERISTICS Items Solderability Solder Heat Resistance Heat Resistance Cold Resistance Requirement More than 90% of the terminal electrode should be covered with solder. Inductance value must remain within 20% of initial value. No disconnection or short circuit. No change in appearance. Inductance value must remain within 20% of initial value. No disconnection or short circuit. No change in appearance. Inductance value must remain within 20% of initial value. No disconnection or short circuit. No change in appearance. Thermal Shock Inductance value must remain within 20% of initial value. No disconnection or short circuit. No change in appearance. Humidity Resistance Inductance value must remain within 20% of initial value. No disconnection or short circuit. No change in appearance. Vibration Test Inductance value must remain within ±5% of initial value. No change in appearance Test Methods 230±5ºC for 4±1 seconds 260±5ºC for 4±1 seconds Temperature: 125±5ºC Time: 500 hours Tested after 2 hours at room temperature Temperature: -40±5ºC Time: 500 hours Tested after 2 hours at room temperature One Cycle Step Temperature (ºC) Time (min.) 1 -40±5ºC 30 2 Room Temperature 3 3 125±5ºC 30 4 Room Temperature 3 Temperature: 40±2ºC at 90~95% relative humidity . Time: 500 Hours Tested after 2 hours at room temperature After 1 hour of vibrations testing, in each of three orientations at 10Hz, then increase to 55Hz, then decrease to 10Hz with 1.52mm P-P amplitudes. 63 LMax Low Profile/High Current Power Inductor LMLP Series – Style D THE FORCE FOR TEARING OFF COVER TAPE IS 10 TO 60 GRAMS IN THE ARROW DIRECTION 165 TO 180º COVER TAPE LABEL CARRIER TAPE ELECTRODE DIRECTION OF EED REEL TAPE TRAILER 160 (6.299) MIN INDUCTORS 1.50 +0.10 -0.00 1.75±0.10 (0.059 +0.004 -0.000 ) (0.069±0.004) 4.00±0.10 (0.157±0.004) TAPE LEADER 388 (15.28) MIN COVER TAPE 250 (9.843) MIN P 330 (13.00) or 178 (7.000) W LABEL 2.50±0.50 (0.098±0.020) 120º Size Code 0405 05A6 0506 0707 07B7 07A7 07C7 1011 13A3 1313 13B3 64 Tape Size (mm) W P 12 8 12 8 12 8 16 12 16 12 16 12 16 12 24 16 24 16 24 16 24 16 Reel Size 13" 13" 13" 13" 13" 13" 13" 13" 13" 13" 13" Reel Reel Reel Reel Reel Reel Reel Reel Reel Reel Reel 13.0±1.00 (0.512±0.039) SPQ 3500 3000 2500 2000 2000 1500 800 1000 1000 500 500 M ZOO 23.0±1.00 (0.906±0.039) AMERICAS EUROPE ASIA-PACIFIC ASIA-KED (KYOCERA Electronic Devices) AVX Greenville, SC AVX Limited, England Tel: 864-967-2150 Tel: +44-1276-697000 AVX Northwest, WA AVX S.A.S., France Tel: 360-699-8746 Tel: +33-1-69-18-46-00 AVX/Kyocera, Asia, Ltd., Hong Kong AVX Midwest, IN AVX GmbH, Germany Tel: +852-2363-3303 Tel: 317-861-9184 Tel: +49-0811-95949-0 AVX/Kyocera (S) Pte Ltd., Singapore KED Hong Kong Ltd. Tel: +852-2305-1080/1223 Tel: +65-6286-7555 AVX Mid/Pacific, CA AVX SRL, Italy AVX/Kyocera Yuhan Hoesa, South Korea Tel: 408-988-4900 Tel: +39-02-614-571 Tel: +82-2785-6504 AVX Northeast, MA AVX Czech Republic Tel: 617-479-0345 Tel: +420-57-57-57-521 AVX/Kyocera HK Ltd., Taiwan KED Hong Kong Ltd. Shenzen Tel: +86-755-3398-9600 KED Company Ltd. Shanghai Tel: +86-21-3255-1833 KED Hong Kong Ltd. Beijing Tel: +86-10-5869-4655 Tel: +886-2-2656-0258 AVX Southwest, CA AVX/ELCO UK Tel: 949-859-9509 Tel: +44-1638-675000 AVX/Kyocera (M) Sdn Bhd, Malaysia AVX Canada ELCO Europe GmbH Tel: +60-4228-1190 Tel: 905-238-3151 Tel: +49-2741-299-0 AVX South America AVX S.A., Spain AVX/Kyocera International Trading Co. Ltd., Shanghai Tel: +55-11-4688-1960 Tel: +34-91-63-97-197 Tel: +86-21-3255 1933 AVX Benelux AVX/Kyocera Asia Ltd., Shenzen Tel: +65-6509-0328 Tel: +86-755-3336-0615 Kyocera Corporation Japan AVX/Kyocera International Trading Co. Ltd., Beijing Tel: +81-75-604-3449 Tel: +31-187-489-337 KED Taiwan Ltd. Tel: +886-2-2950-0268 KED Korea Yuhan Hoesa, South Korea Tel: +82-2-783-3604/6126 KED (S) Pte Ltd. Singapore Tel: +86-10-6588-3528 AVX/Kyocera India Liaison Office Tel: +91-80-6450-0715 Contact: A KYOCERA GROUP COMPANY http://www.avx.com S-SMDPI0M514-N