IDT STAC9767

DATASHEET
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH
STEREO MICROPHONE AND MIC/JACK SENSING
STAC9766/9767
FEATURES
RELATED MATERIALS
•
This datasheet is for Rev. CC1 Parts and Beyond
•
Data Sheet
•
High Performance Σ∆ Technology
•
Reference Designs
•
AC’97 Rev 2.3 Complaint
•
20-bit Full Duplex Stereo ADC & DACs
•
Independent Sample Rates for ADC & DACs
•
5-Wire AC-Link Protocol Compliance
•
20-bit SPDIF Output
•
Full Stereo Microphone Pre-Amp
•
Internal Jack Sensing on Headphone & Line_Out
•
Internal Microphone Input Sensing
•
Digital PC Beep Option
•
Extended AC’97 2.3 Paging Registers
•
Digital-ready Status
•
General Purpose I/O
•
Crystal Elimination Circuit
•
Headphone Drive Capability (50 mW)
•
0dB, 10dB, 20dB and 30dB Microphone Boost
Capability
•
+3.3 V (STAC9767) and +5 V (STAC9766) Analog
Power Supply Options
•
Pin Compatible with STAC9700/21/56
•
100% Compatible with STAC9750/52
•
IDT Surround (SS3D) Stereo Enhancement
•
Energy Saving Dynamic Power Modes
•
Multi-CODEC Option (Intel AC'97 rev 2.3)
•
Six Analog Line-level Inputs
•
103dB SNR LINE-LINE
DESCRIPTION
IDT's STAC9766/9767 (Revision CC1 and beyond) are
general purpose 20-bit, full duplex, audio CODECs conforming to the analog component specification of AC'97
(Audio CODEC 97 Component Specification Rev. 2.3).
The STAC9766/9767 incorporates IDT's proprietary Σ∆
technology The AC’97 CODEC is designed to achieve a
DAC SNR in excess of 103dB.
The DACs, ADCs and mixer are integrated with analog I/
Os, which include four analog line-level stereo inputs, two
analog line-level mono inputs, two stereo outputs, and one
mono output channel. The STAC9766/9767 includes digital
input/output capability for support of modern PC systems
with an output that supports the SPDIF format.
The STAC9766/9767 is a standard 2-channel stereo
CODEC. With IDT’s headphone drive capability, headphones can be driven with without an external amplifier.
The STAC9766/9767 may be used as a secondary
CODEC, with the STAC9700/21/56/08/84/50/52 as the primary, in a multiple CODEC configuration conforming to the
AC'97 Rev. 2.3 specification. This configuration can provide the true six-channel, AC-3 playback required for DVD
applications.
The STAC9766/9767 communicates via the five-wire
AC-Link to any digital component of AC'97, providing flexibility in the audio system design.
Packaged in an AC'97 compliant 48-pin TQFP, the
STAC9766/9767 can be placed on a motherboard, daughter boards, PCI, AMR, CNR, MDC or ACR cards.
KEY SPECIFICATIONS
•
Analog LINE_OUT SNR: 103 dB
•
Digital DAC SNR: 95 dB
•
Digital ADC SNR: 85 dB
•
Full-scale Total Harmonic Distortion: 0.002%
•
Crosstalk Between Input Channels: -70 dB
•
Spurious Tone Rejection: 100 dB
The STAC9766/9767 provides variable sample rate Digital-to-Analog (DA) and Analog-to-Digital (AD) conversion,
mixing and analog processing.
Supported audio sample rates include 48KHz, 44.1KHz,
32KHz, 22.05KHz, 16KHz, 11.025KHz, and 8 KHz; additional rates are supported in the STAC9766/9767 soft
audio drivers. All ADCs and DACs operate at 20-bit resolution.
The STAC9766/9767 includes full Stereo Microphone
IDT™
1
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
STAC9766/9767
V 7.4 12/06
STAC9766/9767
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
PC AUDIO
Table of Contents
1. PRODUCT BRIEF ...................................................................................................................... 6
1.1. Features (Revision CC1 and beyond) ............................................................................................... 6
1.2. Description ........................................................................................................................................ 6
1.3. STAC9766/9767 Block Diagram ........................................................................................................ 8
1.4. Key Specifications ............................................................................................................................. 8
1.5. Related Materials .............................................................................................................................. 8
1.6. Additional Support ............................................................................................................................. 8
2. CHARACTERISTICS AND SPECIFICATIONS .........................................................................9
2.1. Electrical Specifications ..................................................................................................................... 9
2.2. AC Timing Characteristics ............................................................................................................... 13
3. TYPICAL CONNECTION DIAGRAM .......................................................................................17
3.1. Split Independent Power Supply Operation .................................................................................... 18
4. CONTROLLER, CODEC AND AC-LINK .................................................................................20
4.1. AC-link Physical interface ................................................................................................................ 20
4.2. Controller to Single CODEC ............................................................................................................ 20
4.3. Controller to Multiple CODECs ........................................................................................................ 22
4.4. Clocking for Multiple CODEC Implementations ............................................................................... 23
4.5. AC-link Power Management ............................................................................................................ 24
5. AC-LINK DIGITAL INTERFACE ..............................................................................................27
5.1. Overview ......................................................................................................................................... 27
5.2. AC-link Serial Interface Protocol ...................................................................................................... 28
5.3. AC-link Output Frame (SDATA_OUT) ............................................................................................. 31
5.4. AC-link Input Frame (SDATA_IN) .................................................................................................... 34
5.5. AC-link Interoperability Requirements and Recommendations ....................................................... 38
5.6. Slot Assignments for Audio ............................................................................................................. 39
6. STAC9766/9767 MIXER ..........................................................................................................41
6.1. Mixer Description ............................................................................................................................. 41
6.2. Mixer Functional Diagrams .............................................................................................................. 42
6.3. Mixer Analog Input ......................................................................................................................... 43
6.4. Mixer Analog Output ....................................................................................................................... 43
7. SPDIF AND PC BEEP .............................................................................................................44
7.1. SPDIF Digital Mux ...........................................................................................................................44
7.2. PC Beep Implementation ................................................................................................................ 44
8. PROGRAMMING REGISTERS ...............................................................................................46
8.1. Register Descriptions ...................................................................................................................... 47
8.2. General Purpose Input & Outputs ................................................................................................... 65
8.3. Extended CODEC Registers Page Structure Definition .................................................................. 68
8.4. STAC9766/9767 Paging Registers ................................................................................................. 69
8.5. Vendor ID1 and ID2 (Index 7Ch and 7Eh) ...................................................................................... 79
9. LOW POWER MODES ...........................................................................................................81
10. MULTIPLE CODEC SUPPORT ............................................................................................83
10.1. Primary/Secondary CODEC Selection .......................................................................................... 83
10.2. Secondary CODEC Register Access Definitions .......................................................................... 84
11. TESTABILITY ........................................................................................................................85
11.1. ATE Test Mode ............................................................................................................................. 85
12. ORDERING INFORMATION ..................................................................................................86
12.1. STAC9766/9767 Family Options and Part Order Numbers ...........................................................86
13. PIN DESCRIPTION ................................................................................................................87
13.1. Digital I/O ...................................................................................................................................... 88
13.2. Filter/References .......................................................................................................................... 88
13.3. Analog I/O .................................................................................................................................... 89
13.4. Power and Ground Signals .......................................................................................................... 90
IDT™
2
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
STAC9766/9767
V 7.4 12/06
STAC9766/9767
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
PC AUDIO
14. PACKAGE DRAWING ...........................................................................................................91
14.1. 48-Pin LQFP .................................................................................................................................. 91
15. SOLDER REFLOW PROFILE ...............................................................................................92
15.1. Standard Reflow Profile Data ........................................................................................................ 92
15.2. Pb Free Process - Package Classification Reflow Temperatures ................................................. 93
16. APPENDIX A: PROGRAMMING REGISTERS .....................................................................94
17. REVISION HISTORY .............................................................................................................96
IDT™
3
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
STAC9766/9767
V 7.4 12/06
STAC9766/9767
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
PC AUDIO
List of Figures
Figure 1. Block Diagram .................................................................................................................................. 8
Figure 2. Cold Reset Timing ......................................................................................................................... 13
Figure 3. Warm Reset Timing ........................................................................................................................13
Figure 4. Clocks Timing ................................................................................................................................ 14
Figure 5. Data Setup and Hold Timing ......................................................................................................... 15
Figure 6. Signal Rise and Fall Times Timing ................................................................................................ 15
Figure 7. AC-Link Low Power Mode Timing .................................................................................................. 16
Figure 8. ATE Test Mode Timing ..................................................................................................................16
Figure 9. Typical Connection Diagram .......................................................................................................... 17
Figure 10. Split Independent Power Supply Operation ................................................................................. 19
Figure 11. AC-Link to its Companion Controller ........................................................................................... 20
Figure 12. CODEC Clock Source Detection ................................................................................................. 21
Figure 13. STAC9766/9767 Powerdown Timing .......................................................................................... 24
Figure 14. Bi-directional AC-link Frame with Slot Assignments ....................................................................27
Figure 15. AC-Link Audio Output Frame ...................................................................................................... 31
Figure 16. Start of an Audio Output Frame ................................................................................................... 31
Figure 17. STAC9766/9767 Audio Input Frame ........................................................................................... 34
Figure 18. Start of an Audio Input Frame ..................................................................................................... 35
Figure 19. Bi-directional AC-link Frame with Slot assignments ....................................................................39
Figure 20. STAC9766 2-Channel Mixer Functional Diagram .......................................................................42
Figure 21. STAC9767 2-Channel Mixer Functional Diagram .......................................................................42
Figure 22. Example of STAC9766/9767 Powerdown/Powerup Flow ...........................................................81
Figure 23. Powerdown/Powerup Flow With Analog Still Alive .......................................................................82
Figure 24. Pin Description Drawing ............................................................................................................... 87
Figure 25. 48-Pin LQFP Package Outline and Package Dimensions ...........................................................91
Figure 26. Solder Reflow Profile ................................................................................................................... 92
IDT™
4
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
STAC9766/9767
V 7.4 12/06
STAC9766/9767
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
PC AUDIO
List of Tables
Table 1. Clock Mode Configuration ............................................................................................................... 14
Table 2. Common Clocks and Sources ......................................................................................................... 15
Table 3. Recommended CODEC ID Strapping ............................................................................................. 23
Table 4. AC-link Output Slots (Transmitted from the Controller) ................................................................... 27
Table 5. The AC-link input slots (transmitted from the CODEC) ................................................................... 28
Table 6. VRA Behavior .................................................................................................................................. 29
Table 7. Output Slot 0 Bit Definitions ............................................................................................................. 32
Table 8. Command Address Port Bit Assignments ........................................................................................ 33
Table 9. Status Address Port Bit Assignments .............................................................................................. 36
Table 10. Status Data Port Bit Assignments .................................................................................................. 36
Table 11. Primary CODEC Addressing: Slot 0 Tag Bits ................................................................................ 38
Table 12. Secondary CODEC Addressing: Slot 0 tag bits ............................................................................. 38
Table 13. AC-link Input Slots To CODEC ...................................................................................................... 39
Table 14. AC-link Input Slots From CODEC .................................................................................................. 39
Table 15. AC-link Output Slots Dedicated To Audio ...................................................................................... 40
Table 16. AC-link Input Slots Dedicated To Audio ......................................................................................... 40
Table 17. Audio Interrupt Slot Definitions ...................................................................................................... 40
Table 18. Digital PC Beep Examples ............................................................................................................. 45
Table 19. Programming Registers ................................................................................................................. 46
Table 20. Extended Audio ID Register Functions .......................................................................................... 60
Table 21. AMAP Compliant ...........................................................................................................................62
Table 22. Hardware Supported Sample Rates .............................................................................................. 63
Table 23. Supported Jack and Mic Sense Functions .................................................................................... 72
Table 24. Reg 68h Default Values ................................................................................................................. 73
Table 25. Gain or Attenuation Examples ....................................................................................................... 73
Table 26. Register 68h/Page 01h Bit Overview ............................................................................................. 74
Table 27. Sensed Bits (Outputs) ................................................................................................................... 75
Table 28. Sensed Bits (Inputs) ...................................................................................................................... 76
Table 29. Low Power Modes ......................................................................................................................... 81
Table 30. CODEC ID Selection .....................................................................................................................83
Table 31. Secondary CODEC Register Access Slot 0 Bit Definitions ...........................................................84
Table 32. Test Mode Activation .....................................................................................................................85
Table 33. ATE Test Mode Operation ............................................................................................................. 85
Table 34. STAC9766/9767 Ordering Information .......................................................................................... 86
Table 35. Digital Connection Signals ............................................................................................................. 88
Table 36. Filtering and Voltage References .................................................................................................. 88
Table 37. Analog Connection Signals ........................................................................................................... 89
Table 38. Power and Ground Signals ............................................................................................................ 90
IDT™
5
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
STAC9766/9767
V 7.4 12/06
STAC9766/9767
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
PC AUDIO
1. PRODUCT BRIEF
1.1.
1.2.
Features (Revision CC1 and beyond)
•
High Performance Σ∆ Technology
•
AC’97 Rev 2.3 Complaint
•
20-bit Full Duplex Stereo ADCs, DACs
•
Independent Sample Rates for ADCs & DACs
•
5-Wire AC-Link Protocol Compliance
•
20-bit SPDIF Output
•
Full Stereo Microphone Pre-Amp
•
Internal Jack Sensing on Headphone and Line_Out
•
Internal Microphone Input Sensing
•
Digital PC Beep Option
•
Extended AC’97 2.3 Paging Registers
•
Adjustable VREF Amplifier
•
Digital-ready Status
•
General Purpose I/Os
•
Crystal Elimination Circuit
•
Headphone Drive Capability (50 mW)
•
0dB, 10dB, 20dB, and 30dB Stereo or Mono M icrophone Boost Capability
•
+3.3V (STAC9767) and +5V (STAC9766) Analog Power Supply Options
•
Pin Compatible with the STAC9700, STAC9721, STAC9756
•
100% Pin Compatible with STAC9750 and STAC9752
•
IDT Surround (SS3D) Stereo Enhancement
•
Energy Saving Dynamic Power Modes
•
Multi-CODEC option (Intel AC'97 rev 2.3)
•
Six Analog Line-level Inputs
•
103dB SNR LINE-LINE
Description
IDT's STAC9766/9767 (Revision CC1 and beyond) are general purpose 20-bit, full duplex, audio
CODECs conforming to the analog component specification of AC'97 (Audio CODEC 97 Component
Specification Rev. 2.3). The STAC9766/9767 incorporates IDT's proprietary Σ∆ technology to
achieve a DAC SNR in excess of 103dB. The DACs, ADCs and mixer are integrated with analog
I/Os, which include four analog line-level stereo inputs, two analog line-level mono inputs, two stereo
outputs, and one mono output channel. The STAC9766/9767 includes digital output capability for
support of modern PC systems with an output that supports the SPDIF format. The STAC9766/9767
is a standard 2-channel stereo CODEC. With IDT’s headphone drive capability, headphones can be
driven without an external amplifier. The STAC9766/9767 may be used as a secondary CODEC,
with the STAC9700/21/44/56/08/84/50/66 as the primary, in a multiple CODEC configuration conforming to the AC'97 Rev. 2.3 specification. This configuration can provide the true six-channel,
AC-3 playback required for DVD applications. The STAC9766/9767 communicates via the five-wire
IDT™
6
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
STAC9766/9767
V 7.4 12/06
STAC9766/9767
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
PC AUDIO
AC-Link to any digital component of AC'97 providing flexibility in the audio system design. Packaged
in an AC'97 compliant 48-pin TQFP, the STAC9766/9767 can be placed on a motherboard, daughter
boards, PCI, AMR, CNR, MDC or ACR cards.
The STAC9766/9767 block diagram is illustrated in Figure 1. It provides variable sample rate Digital-to-Analog (DA) and Analog-to-Digital (AD) conversion, mixing, and analog processing. Supported
audio sample rates include 48KHz, 44.1KHz, 32 KHz, 22.05KHz, 16KHz, 11.025KHz, and 8KHz;
additional rates are supported in the STAC9766/9767 soft audio drivers. All ADCs and DACs operate at 20-bit resolution.
Two 20-bit DACs convert the digital stereo PCM-out content to audio. The MIXER block combines
the PCM_OUT with any analog sources to drive the LINE_OUT and HP_OUT outputs. The
MONO_OUT delivers either microphone only, or a mono mix of sources from the MIXER. The stereo
variable sample rate 20-bit ADCs provide record capability for any mix of mono or stereo sources,
and deliver a digital stereo PCM-in signal back to the AC-Link. The microphone input and mono mix
input can be recorded simultaneously, thus allowing for an all digital output in support of the digital
ready initiative. For a digital ready record path, the microphone is connected to the left channel ADC
while the mono output of the stereo mixer is connected to right channel ADC.
The STAC9766/9767 includes full Stereo Microphone Pre-Amp support and can be used with the
10dB, 20dB and 30dB Microphone Boost options. This integration allows for additional cost savings
and options.
The STAC9766/9767 includes jack sensing on the Headphone and Line_Out. The STAC9766/9767
jack sense can detect the presence of devices on the Headphone and Line Outputs and on both Mic
inputs. With proprietary IDT current- and impedance-sensing techniques, the impedance load on the
Headphone and Line Outputs can also be detected. The GPIOs on the STAC9766/9767 remain
available for advanced configurations.
The STAC9766/9767 implementation of jack sense uses the Extended Paging Registers defined by
the AC'97 2.3 Specification. This allows for additional registry space to hold the identification information about the CODEC, the jack sensing details and results, and the external surroundings of the
CODEC. The information within the Extended Paging Registers will allow for the automatic configuration of the audio subsystem without end-user intervention. For example, the BIOS can populate
the Extended Paging Registers with valuable information for both the audio driver and the operating
system such as gain and attenuation stages, input population and input phase. With this input information, the IDT driver will automatically provide to the Volume Control Panel only the volume sliders
that are implemented in the system, thus improving the end-user's experience with the PC.
The information in the Extended Paging Registers will also allow for automatic configuration of
microphone inputs, the ability to switch between SPDIF and analog outputs, the routing of the master volume slider to the proper physical output, and SoftEQ configurations. The fully parametric IDT
SoftEQ can be initiated upon jack insertion and sensed impedance levels.
The STAC9766/9767 also offers two styles of PC BEEP, Analog and Digital. The digital PC BEEP is
a new feature added to the AC’97 Specification Rev 2.3.
The STAC9766/9767 is designed primarily to support stereo (2-speaker) audio. True AC-3 playback
can be achieved for 6-speaker applications by taking advantage of the multi-CODEC option available in the STAC9766/9767 to support multiple CODECs in an AC'97 architecture. Additionally, the
IDT™
7
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
STAC9766/9767
V 7.4 12/06
STAC9766/9767
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
PC AUDIO
STAC9766/9767 provides for a stereo enhancement feature, IDT Surround 3D (SS3D). SS3D provides the listener with several options for improved speaker separation beyond the normal 2- or
4-speaker arrangements.
The STAC9766/9767 can be SoundBlaster ® and Windows Sound System® compatible when used
with IDT’s WDM driver for Windows 98/2K/ME/XP or with Intel/Microsoft driver included with Windows 2K/ME/XP.
SoundBlaster is a registered trademark of Creative Labs.
Windows is a registered trademark of Microsoft Corporation.
1.3.
STAC9766/9767 Block Diagram
Figure 1. Block Diagram
4 stereo
sources
Power
Management
2 mono
sources
Stereo
Mono
PCM out DACs
AC-link
SYNC
BIT_CLK
SDATA_OUT
SDATA_IN
RESET#
Multi-Codec
CID0
CID1
DAC
Digital
Interface
DAC
Registers
64x16 bits
ADC
HP_OUT
MIXER
Analog mixing
and Gain Control
LINE_OUT
MONO_OUT
ADC
Stereo or
Mono
Mic Boost
0,10,20
or 30 dB
PCM in ADCs
GPIO1
EAPD
GPIO0
Variable Sample Rate
20-Bit DACs and
20-Bit ADCs
1.4.
SPDIF
Analog LINE_OUT SNR: 103 dB
Digital DAC SNR: 95 dB
Digital ADC SNR: 85 dB
Full-scale Total Harmonic Distortion: 0.002%
Crosstalk between Input Channels: -70 dB
Spurious Tone Rejection: 100 dB
Related Materials
•
•
•
1.6.
MIC2 (R)
Key Specifications
•
•
•
•
•
•
1.5.
M MIC1 (L)
U
X
Product Brief
Reference Designs for MB, AMR, CNR, and ACR applications
Audio Precision Performance Plots
Additional Support
Additional product and company information can be obtained by going to the
IDT web site at: www.IDT.com
IDT™
8
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
STAC9766/9767
V 7.4 12/06
STAC9766/9767
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
PC AUDIO
2. CHARACTERISTICS AND SPECIFICATIONS
2.1.
Electrical Specifications
2.1.1.
Absolute Maximum Ratings
Stresses above the ratings listed below can cause permanent damage to the STAC9766/9767. These ratings, which are standard
values for IDT commercially rated parts, are stress ratings only. Functional operation of the device at these or any other
conditions above those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum
rating conditions for extended periods can affect product reliability. Electrical parameters are guaranteed only over the
recommended operating temperature range.
Item
Pin
Maximum Rating
Analog maximum supply voltage
AVdd
6 Volts
Digital maximum supply voltage
DVdd
5.5 Volts
VREFOUT output current
5 mA
Voltage on any pin relative to ground
Vss - 0.3 V to Vdd + 0.3 V
Operating temperature
0o C to +70o C
Storage temperature
-55 o C to +125 o C
Soldering temperature
260 o C for 10 seconds *
Soldering temperature information for all available packages
begins on page 92.
2.1.2.
Recommended Operation Conditions
Parameter
Power Supply Voltage
Min.
Typ.
Max.
Units
Digital - 3.3 V
3.135
3.3
3.465
V
Analog - 3.3 V
3.135
3.3
3.465
V
Analog - 5 V
4.75
5
5.25
V
+70
°C
+90
°C
Ambient Operating Temperature
Case Temperature
0
Tcase (48-LQFP)
ESD: The STAC9766/9767 is an ESD (electrostatic discharge) sensitive device. The human body and test equipment can
accumulate and discharge electrostatic charges up to 4000 Volts without detection. Even though the STAC9766/9767
implements internal ESD protection circuitry, proper ESD precautions should be followed to avoid damaging the functionality
or performance.
IDT™
9
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
STAC9766/9767
V 7.4 12/06
STAC9766/9767
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
2.1.3.
Power Consumption
Parameter
Digital Supply Current
+ 3.3V Digital
Analog Supply Current
+ 5V Analog
+ 3.3V Analog
Power Down Status
PR0 Supply Current
PR1 Supply Current
PR2 Supply Current
PR3 Supply Current
PR4 Supply Current
PR5 Supply Current
PR6 Supply Current
2.1.4.
PC AUDIO
Min
Typ
Max
Unit
-
35
-
mA
-
80
70
-
mA
mA
-
TBD
TBD
TBD
TBD
TBD
TBD
TBD
-
mA
mA
mA
mA
mA
mA
mA
AC-Link Static Digital Specifications
(T ambient = 25 ºC, DVdd = 3.3 V ± 5%, AVss = DVss = 0 V; 50 pF external load)
Parameter
Input Voltage Range
Low level input range
High level input voltage
High level output voltage
Low level output voltage
Input Leakage Current (AC-Link inputs)
Output Leakage Current (AC-Link outputs - Hi-Z)
Output buffer drive current
2.1.5.
Symbol
Vin
Vil
Vih
Voh
Vol
-
Min
-0.30
0.65 x DVdd
0.90 x DVdd
-10
-10
-
Typ
4
Max
DVdd + 0.30
0.35 x DVdd
0.1 x DVdd
10
10
-
Unit
V
V
V
V
V
µA
µA
mA
STAC9766 Analog Performance Characteristics
(T ambient = 25 ºC, AVdd = 5.0 V ± 5%, DVdd = 3.3 V ± 5%, AVss = DVss = 0 V; 1 KHz input sine
wave; Sample Frequency = 48 KHz; 0dB = 1 Vrms, 10 KΩ / 50 pF load, Testbench Characterization
BW: 20 Hz – 20 KHz, 0dB settings on all gain stages)
Parameter
Full Scale Input Voltage:
All Analog Inputs except Mic
Mic Inputs (Note 1)
Full Scale Output:
Line Output
PCM (DAC) to LINE_OUT
MONO_OUT
HEADPHONE_OUT (32 Ω load) (peak)
Analog S/N: (Note 2)
CD to LINE_OUT
Other to LINE_OUT
IDT™
10
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
Min
Typ
Max
Unit
-
1.0
0.03
-
Vrms
Vrms
-
-
-
1.0
1.0
1.0
50
-
Vrms
Vrms
Vrms
mW
-
103
103
-
dB
dB
STAC9766/9767
V 7.4 12/06
STAC9766/9767
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
Parameter
D/A to LINE_OUT
LINE_IN to A/D with High pass filter enabled
Analog Frequency Response (Note 3)
Total Harmonic Distortion: (Note 4)
CD to LINE_OUT
Other to LINE_OUT
D/A to LINE_OUT (full scale)
LINE_IN to A/D with High pass filter enabled
HEADPHONE_OUT
A/D & D/A Digital Filter Pass Band (Note 5)
A/D & D/A Digital Filter Transition Band
A/D & D/A Digital Filter Stop Band
A/D & D/A Digital Filter Stop Band Rejection (Note 6)
DAC Out-of-Band Rejection (Note 7)
Group Delay (48 KHz sample rate)
Any Analog Input to LINE_OUT Crosstalk (10 KHz Signal Frequency)
Any Analog Input to LINE_OUT Crosstalk (1 KHz Signal Frequency)
Spurious Tone Rejection
Attenuation, Gain Step Size
Input Impedance (Note 8)
Input Capacitance
VREFout
Interchannel Gain Mismatch ADC
Interchannel Gain Mismatch DAC
Note:
1.
2.
3.
4.
5.
6.
7.
8.
PC AUDIO
Min
20
Typ
95
85
-
Max
20,000
Unit
dB
dB
Hz
84
74
20
19,200
28,800
100
55
70
-
95
95
84
80
-
19,200
28,800
1
0.5
0.5
dB
dB
dB
dB
dB
Hz
Hz
Hz
dB
dB
ms
dB
dB
dB
dB
KΩ
pF
V
dB
dB
100
100
1.5
50
15
0.5 x AVdd
-
With +30 dB Boost on, 1.0 Vrms with Boost off
Ratio of Full Scale signal to idle channel noise output is measured “A weighted” over a 20 Hz to a 20 KHz bandwidth.
(AES17-1991 Idle Channel Noise or EIAJ CP-307 Signal-to-noise Ratio).
± 1dB limits for Line Output & 0dB gain
20 KHz BW, 48 KHz Sample Frequency
± 0.25dB limits
Stop Band rejection determines filter requirements. Out-of-Band rejection determines audible noise.
The integrated Out-of-Band noise generated by the DAC process, during normal PCM audio playback, over a bandwidth
28.8 to 100 KHz, with respect to a 1 Vrms DAC output.
For all inputs except PC BEEP.
2.1.6.
STAC9767 Analog Performance Characteristics
(T ambient = 2 5 º C , A V d d = 3 . 3 V ± 5 % , D V d d = 3 . 3 V ± 5 % , A V s s = D V s s = 0 V ; 1 K H z i n p u t s i n e
wave; Sample Frequency=48KHz; 0dB=1Vrms, 10KΩ / 50 pFload, TestbenchCharacterization
BW: 20Hz–20KHz, 0dB settings on all gain stages)
Parameter
Full Scale Input Voltage:
All Analog Inputs except Mic
Mic Inputs (Note 1)
Full Scale Output:
Line Output
IDT™
11
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
Min
Typ
Max
Unit
-
1.0
0.03
-
Vrms
Vrms
-
0.5
-
Vrms
STAC9766/9767
V 7.4 12/06
STAC9766/9767
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
Parameter
PCM (DAC) to LINE_OUT
MONO_OUT
HEADPHONE_OUT (32 Ω load) (peak)
Analog S/N: (Note 2)
CD to LINE_OUT
Other to LINE_OUT
D/A to LINE_OUT
LINE_IN to A/D with High pass filter enabled
Analog Frequency Response (Note 3)
Total Harmonic Distortion: (Note 4)
CD to LINE_OUT
Other to LINE_OUT
D/A to LINE_OUT (full scale)
LINE_IN to A/D with High pass filter enabled
HEADPHONE_OUT
A/D & D/A Digital Filter Pass Band (Note 5)
A/D & D/A Digital Filter Transition Band
A/D & D/A Digital Filter Stop Band
A/D & D/A Digital Filter Stop Band Rejection (Note 6)
DAC Out-of-Band Rejection (Note 7)
Group Delay (48 KHz sample rate)
Any Analog Input to LINE_OUT Crosstalk (10 KHz Signal Frequency)
Any Analog Input to LINE_OUT Crosstalk (1 KHz Signal Frequency)
Spurious Tone Rejection
Attenuation, Gain Step Size
Input Impedance (Note 8)
Input Capacitance
VREFout
Interchannel Gain Mismatch ADC
Interchannel Gain Mismatch DAC
Gain Drift
Note:
1.
2.
3.
4.
5.
6.
7.
8.
IDT™
Min
PC AUDIO
Max
-
Typ
0.5
0.5
12.5
-
Unit
Vrms
Vrms
mW
20
97
97
95
85
-
20,000
dB
dB
dB
dB
Hz
74
20
19,200
28,800
100
55
70
-
95
95
19,200
28,800
1
0.5
0.5
-
dB
dB
dB
dB
dB
Hz
Hz
Hz
dB
dB
ms
dB
dB
dB
dB
KΩ
pF
V
dB
dB
ppm/ºC
84
84
80
100
100
1.5
50
15
0.5 X AVdd
100
With +30 dB Boost on, 1.0Vrms with Boost off
Ratio of Full Scale signal to idle channel noise output is measured “A weighted” over a 20 Hz to a 20 KHz bandwidth.
(AES17-1991 Idle Channel Noise or EIAJ CP-307 Signal-to-noise Ratio).
± 1dB limits for Line Output & 0 dB gain
20 KHz BW, 48 KHz Sample Frequency
± 0.25dB limits
Stop Band rejection determines filter requirements. Out-of-Band rejection determines audible noise.
The integrated Out-of-Band noise generated by the DAC process, during normal PCM audio playback, over a bandwidth
28.8 to 100 KHz, with respect to a 1 Vrms DAC output.
For all inputs except PC BEEP.
12
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
STAC9766/9767
V 7.4 12/06
STAC9766/9767
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
2.2.
PC AUDIO
AC Timing Characteristics
(T ambient = 25 °C, AVdd = 3.3 V or 5 V ± 5%, DVdd = 3.3V ± 5%, AVss = DVss = 0 V; 7 5 pF external
load for BIT_CLK and 60pF external load for SDATA_IN)
2.2.1.
Cold Reset
Figure 2. Cold Reset Timing
Trst2clk
Tres_low
RESET#
Ttri2actv
BIT_CLK
Ttri2actv
SDATA_IN
Parameter
RESET# active low pulse width
RESET# inactive to SDATA_IN or BIT_CLK active delay
RESET# inactive to BIT_CLK startup delay
BIT_CLK active to RESET# asserted (Not shown in diagram)
Symbol
Tres_low
Tri2actv
Trst2clk
Tclk2rst
Min
1.0
0.01628
0.416
Typ
-
Max
25
400
-
Units
µs
ns
µs
µs
Note: BIT_CLK and SDATA_IN are in a high impedance state during reset.
2.2.2.
Warm Reset
Figure 3. Warm Reset Timing
Tsync_high
Tsync_2clk
SYNC
BIT_CLK
Parameter
SYNC active high pulse width
SYNC inactive to BIT_CLK startup delay
IDT™
Symbol
Tsync_high
Tsync2clk
13
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
Min
1.0
162.8
Typ
1.3
-
STAC9766/9767
Max
-
Units
µs
ns
V 7.4 12/06
STAC9766/9767
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
2.2.3.
PC AUDIO
Clocks
Figure 4. Clocks Timing
Tclk_low
BIT_CLK
Tclk_high
Tclk_period
Tsync_low
Tsync_high
SYNC
Tsync_period
Parameter
Symbol
BIT_CLK frequency
BIT_CLK period
BIT_CLK output jitter
BLT_CLK high pulse width (Note 1)
BIT_CLK low pulse width (Note 1)
SYNC frequency
SYNC period
SYNC high pulse width
SYNC low pulse width
Note: 1. Worst case duty cycle restricted to 45/55.
2.2.4.
Tclk_period
Tclk_high
Tclk_low
Tsync_period
Tsync_high
Tsync_low
Min
36
36
-
Typ
12.288
81.4
750
40.7
40.7
48.0
20.8
1.3
19.5
Max
45
45
-
Units
MHz
ns
ps
ns
ns
KHz
µs
µs
µs
STAC9766/9767 Crystal Elimination Circuit and Clock Frequencies
The STAC9766/9767 supports several clock frequency inputs as described in the following table. In
general, when a 24.576 MHz xtal is not used, the XTALOUT pin should be tied to ground. This short
to ground configures the part into an alternate clock mode and enables an on board PLL.
CODEC Modes:
P = The STAC9766/9767 as a Primary CODEC
S = The STAC9766/9767 as a Secondary CODEC.
Table 1. Clock Mode Configuration
XTL_OUT
Pin Config
XTAL
XTAL or open
XTAL or open
XTAL or open
short to ground
short to ground
short to ground
short to ground
IDT™
CID1
Pin Config
float
float
pulldown
pulldown
float
float
pulldown
pulldown
CID0
Pin Config
float
pulldown
float
pulldown
float
pulldown
float
pulldown
Clock Source Input
24.576MHz crystal
12.288 MHz BIT_CLK
12.288 MHz BIT_CLK
12.288 MHz BIT_CLK
14.31818 MHz source
27 MHz source
48 MHz source
24.576 MHz source
14
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
STAC9766/9767
CODEC
Mode
P
S
S
S
P
P
P
P
CODEC
D
0
1
2
3
0
0
0
0
V 7.4 12/06
STAC9766/9767
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
PC AUDIO
Table 2. Common Clocks and Sources
Clock Source
Clock Frequency
XTAL
24.576MHz
BIT_CLK
VGA
2.2.5.
12.288MHz
14.31818MHz
Digital Video
27MHz
USB
48MHz
Data Setup and Hold
(50pF external load)
Figure 5. Data Setup and Hold Timing
tco
BIT_CLK
T setup
V ih
SDATA_OUT
SDATA_IN
SYNC
V il
V oh
V ol
T hold
Parameter
Symbol
Min
Typ
Max
Setup to falling edge of BIT_CLK
Tsetup
10
Hold from falling edge of BIT_CLK
Thold
10
Output Valid Data from rising edge of BIT_CLK
tco
15
Note:
Setup and hold time parameters for SDATA_IN are with respect to the AC'97 controller.
2.2.6.
Units
ns
ns
ns
Signal Rise and Fall Times
(BIT_CLK: 75pF external load; from 10% to 90% of Vdd)
(SDATA_IN: 60pF external load; from 10% to 90% of Vdd)
Figure 6. Signal Rise and Fall Times Timing
BIT_CLK
Triseclk
Tfallclk
Trisedin
Tfalldin
SDATA_IN
IDT™
15
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
STAC9766/9767
V 7.4 12/06
STAC9766/9767
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
Parameter
Symbol
Triseclk
Tfallclk
Trisedin
Tfalldin
BIT_CLK rise time
BIT_CLK fall time
SDATA_IN rise time
SDATA_IN fall time
2.2.7.
Min
-
PC AUDIO
Typ
-
Max
6
6
6
6
Units
ns
ns
ns
ns
AC-Link Low Power Mode Timing
Figure 7. AC-Link Low Power Mode Timing
Slot 1
SYNC
Slot 2
BIT_CLK
Write to
0x20
SDATA_OUT
Don't care
Data PR4
Ts2_pdown
SDATA_IN
Note: BIT_CLK not to scale
Parameter
End of Slot 2 to BIT_CLK, SDATA_IN low
2.2.8.
Symbol
Ts2_pdown
Min
-
Typ
-
Max
1.0
Units
µs
Typ
-
Max
25.0
Units
ns
ns
ATE Test Mode
Figure 8. ATE Test Mode Timing
RESET#
SDATA_OUT
Tsetup2rst
Hi-Z
SDATA_IN, BIT_CLK
Toff
Parameter
Setup to trailing edge of RESET# (also applies to SYNC)
Rising edge of RESET# to Hi-Z delay
Symbol
Tsetup2rst
Toff
Min
15.0
-
Note: 1) All AC-Link signals are normally low through the trailing edge of RESET#. Bringing
SDATA_OUT high for the trailing edge of RESET# causes the STAC9766/9767 AC-Link outputs to
go high-impedance, which is suitable for ATE in-circuit testing.
Note: 2) Once the test mode has been entered, the STAC9766/9767 must be issued another
RESET# with all AC-Link signals low to return to the normal operating mode.
Note: 3) # denotes active low.
IDT™
16
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
STAC9766/9767
V 7.4 12/06
STAC9766/9767
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
PC AUDIO
3. TYPICAL CONNECTION DIAGRAM
Figure 9. Typical Connection Diagram
*OPTIONAL
2 Ω*
Ferrite Bead
3.3V ± 5%
0.1 µF
1 µF
0.1 µF
25
AVdd1
0.1 µF
1 µF
38
1
AVdd2
DVdd1
0.1 µF
(Near Clk source)
CLOCK_IN*
9
*Add resistive divider
when using 5V clock.
OPTIONAL
DVdd2
2
27 pF
XTL_IN
24.576 MHz
12
PC_BEEP
XTL_OUT
3
13
PHONE
SDATA_OUT
14
AUX_L
BIT_CLK
AUX_R
SDATA_IN
15
SYNC
16
VIDEO_L
RESET#
17
VIDEO_R
CID0
18
CID1
CD_L
19
EAPD
CD_GND
STAC9767
VREFOUT
20
CD_R
VREF
27 pF
0Ω
5
22 Ω
6
8
10
27 pF
TUNE TO LAYOUT
11
45
46
47
28
27
1 µF
21
MIC1
NC
22
MIC2
NC
23
NC
LINE_IN_L
SPDIF
24
LINE_IN_R
GPIO1
32
1 µF*
CAP2
GPIO0
0.1 µF
LINE_OUT_L
*OPTIONAL
LINE_OUT_R
820 pF
29
820 pF
30
AFILT1
MONO_OUT
HP_OUT_L
EMI
Filter
31
33
34
48
44
43
35
36
37
39
AFILT2
HP_COMM
AVss1
26
AVss2
42
DVss1
4
DVss2
HP_OUT_R
7
40
HP_COMM should be tied to
ground at the headphone pin.
41
*Terminate ground
plane as close to codec
as possible
Analog
Ground
Digital
Ground
Pin 48: To Enable SPDIF, use a 1KΩ - 1 0 KΩ external pulldown. To Disable SPDIF, use a 1KΩ - 1 0 KΩ external pullup. Do NOT leave Pin 48 floating.
The CD_GND signal is an AC signal return for the two CD input channels. It is normally biased at about 2.5V. The
name of the pin in the AC97 specification is CD_GND, and this has confused many designers. It should not have any
DC path to GND. Connecting the CD_GND signal directly to ground will change the internal bias of the entire CODEC,
and cause significant distortion. If there is no analog CD input, then this pin can be No-Connect.
IDT™
17
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
STAC9766/9767
V 7.4 12/06
STAC9766/9767
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
3.1.
PC AUDIO
Split Independent Power Supply Operation
In PC applications, one power supply input to the STAC9766/9767 may be derived from a supply
regulator and the other directly from the PCI power supply bus. When power is applied to the PC, the
regulated supply input to the IC will be applied some time delay after the PCI power supply. Without
proper on-chip partitioning of the analog and digital circuitry, some manufacturer's CODECs would
be subject to on-chip SCR type latch-up.
IDT’s STAC9766/9767 specifically allows power-up sequencing delays between the analog (AVddx)
and digital (VDddx) supply pins. These two power supplies can power-up independently and at different rates with no adverse effects to the CODEC. The IC is designed with independent analog and
digital circuitry that prevents on-chip SCR type latch-up.
However, the STAC9766/9767 is not designed to operate for extended periods with only the analog
supply active.
Note: Pin 48: To Enable SPDIF, use a 1 KΩ - 1 0 KΩ external pulldown. To Disable SPDIF, use a
1 KΩ - 1 0 KΩ external pullup. Do NOT leave Pin 48 floating.
Note: The CD_GND signal is an AC signal return for the two CD input channels. It is normally
biased at about 2.5V. The name of the pin in the AC97 specification is CD_GND, and this has
confused many designers. It should not have any DC path to GND. Connecting the CD_GND
signal directly to ground will change the internal bias of the entire CODEC, and cause significant
distortion. If there is no analog CD input, then this pin can be No-Connect.
IDT™
18
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
STAC9766/9767
V 7.4 12/06
STAC9766/9767
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
PC AUDIO
Figure 10. Split Independent Power Supply Operation
*Suggested
3.3V or 5V ± 5%
0.1 µF
1 µF
0.1 µF
0.1 µF
3.3V ± 5%
10 µF
0.1 µF
(Near Clk source)
25
AVdd1
38
1
AVdd2
DVdd1
CLOCK_IN*
9
*Add resistive divider
when using 5V clock.
OPTIONAL
DVdd2
27 pF
XTL_IN
24.576 MHz
12
PC_BEEP
XTL_OUT
27 pF
0Ω
13
PHONE
SDATA_OUT
14
AUX_L
BIT_CLK
15
SDATA_IN
AUX_R
SYNC
16
VIDEO_L
RESET#
5
6
8
10
EMI
Filter
22 Ω
27 pF
TUNE TO LAYOUT
11
17
VIDEO_R
CID0
18
CID1
CD_L
STAC9766 (5V Analog)
or
STAC9767 (3.3V Analog)
19
CD_GND
20
CD_R
EAPD
VREFOUT
VREF
45
46
47
28
27
1 µF
21
MIC1
NC
22
MIC2
NC
23
NC
LINE_IN_L
SPDIF
24
LINE_IN_R
GPIO1
32
1 µF*
CAP2
GPIO0
0.1 µF
LINE_OUT_L
*OPTIONAL
LINE_OUT_R
820 pF
820 pF
29
AFILT1
MONO_OUT
HP_OUT_L
30
31
33
34
48
44
43
35
36
37
39
AFILT2
HP_COMM
AVss1
26
AVss2
42
DVss1
4
DVss2
HP_OUT_R
7
40
41
*Terminate ground
plane as close to codec
as possible
Analog
Ground
IDT™
HP_COMM should be tied to
ground at the headphone pin.
19
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
Digital
Ground
STAC9766/9767
V 7.4 12/06
STAC9766/9767
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
PC AUDIO
4. CONTROLLER, CODEC AND AC-LINK
This section describes the physical and high-level functional aspects of the AC‘97-Controller to
CODEC interface, referred to as AC-link.
4.1.
AC-link Physical interface
The STAC9766/9767 communicates with its companion Digital Controller via the AC-link digital
serial interface. AC-link has been defined to support connections between a single Controller and up
to four CODECs. All digital audio, modem, and handset data streams, as well as all control (command/status) information are communicated over this serial interconnect, which consists of a clock
(BIT_CLK), frame synchronization (SYNC), serial data in (SDATA_IN), serial data out
(SDATA_OUT), and a reset (RESET#).
4.2.
Controller to Single CODEC
The simplest and most common AC‘97 system configuration is a point-to-point AC-link connection
between Controller and the STAC9766/9767, as illustrated in Figure 11.
Figure 11. AC-Link to its Companion Controller
SYNC
XTAL_IN
BIT_CLK
Digital A
DC'97
Controller
SDATA_OUT
AC'97 Codec
SDATA_IN
XTAL_OUT
RESET#
A primary CODEC may act as either a source or a consumer of BIT_CLK, depending on the configuration.
While RESET# is asserted, if a clock is present at the BIT_CLK pin for at least five cycles before
RESET# is de-asserted, then the CODEC is a consumer of BIT_CLK, and must not drive BIT_CLK
when RESET# is de-asserted. The clock is being provided by other than the primary CODEC, for
instance by the controller or an independent clock chip. In this case the primary CODEC must act as
a consumer of the BIT_CLK signal as if it were a secondary CODEC.
This clock source detection must be done each time the RESET# line is asserted. In the case of a
warm reset, where the clock is halted but RESET# is not asserted, the CODEC must remember the
clock source, and not begin generating the clock on the assertion of SYNC if the CODEC had previously determined that it was a consumer of BIT_CLK.
IDT™
20
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
STAC9766/9767
V 7.4 12/06
STAC9766/9767
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
PC AUDIO
Figure 12. CODEC Clock Source Detection
AC'97 Clock Source
Detection
RESET# Signal Asserted
Yes
12.288MHz signal on BIT_CLK is
being generated externally; codec
uses this signal as the clock.
Yes
24.576MHz Crystal on XTL_IN
and XTL_OUT used by codec to
generate clock on BIT_CLK
Yes
24.576 MHz signal on XTL_IN
used by codec to generate
12.288MHz clock on BIT_CLK
Yes
14.318 MHz signal on XTL_IN
used by codec to generate
12.288MHz clock on BIT_CLK
BIT_CLK Toggling?
No
After RESET# Signal
Deasserted
24.576MHz
crystal present?
No
24.576MHz
oscillator present?
No
14.318MHz
oscillator presnent?
No
Error condition - no clock
source present
The STAC9766/9767 uses the XTAL_OUT pin (pin 3) and the CID0 and CID1 pins (pins 45 & 46) to
determine its alternate clock frequencies. See section 2.2.4: page14 for additional information on
Crystal Elimination and for supported clock frequencies.
If, when the RESET# signal has been de-asserted, the CODEC has not detected a signal on
BIT_CLK, as defined in the previous paragraph, then the AC‘97 CODEC derives its clock internally
from an externally attached 24.576 MHz crystal or oscillator (or optionally from an external
14.318 MHz oscillator), and drives a buffered 12.288 MHz clock to its digital companion Controller
over AC-link under the signal name “BIT_CLK”. Clock jitter at the DACs and ADCs is a fundamental
impediment to high quality output, and the internally generated clock will provide AC‘97 with a clean
clock that is independent of the physical proximity of AC‘97’s companion Digital Controller (henceforth referred to as “the Controller”).
If BIT_CLK begins toggling while the RESET# signal is still asserted, the clock is being provided by
other than the primary CODEC, for instance by the controller or by a discrete clock source. In this
case, the primary CODEC must act as a consumer of the BIT_CLK signal as if it were a secondary
CODEC.
IDT™
21
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
STAC9766/9767
V 7.4 12/06
STAC9766/9767
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
PC AUDIO
The beginning of all audio sample packets, or Audio Frames, transferred over AC-link is synchronized to the rising edge of the SYNC signal. SYNC is driven by the Controller. The Controller generates SYNC by dividing BIT_CLK by 256 and applying some conditioning to tailor its duty cycle. This
yields a 48 KHz SYNC signal whose period defines an audio frame. Data is transitioned on AC-link
on every rising edge of BIT_CLK, and subsequently sampled by the receiving device on the receiving side of AC-link on each immediately following falling edge of BIT_CLK.
4.3.
Controller to Multiple CODECs
Several vendor specific methods of supporting multiple CODEC configurations on AC-link have
been implemented or proposed, including CODECs with selective AC-link pass-through and controllers with duplicate AC-links.
Potential implementations include:
•
6-channel audio using 3 x 2-channel CODECs.
•
Separate CODECs for independent audio and modem AFE.
•
Docking stations, where one CODEC is in the laptop and another is in the dock.
This specification defines support for up to four CODECs on the AC-link. By definition there can be
one Primary CODEC (ID 00) and up to three Secondary CODECs (IDs 01,10, and 11). The CODEC
ID functions as a chip select. Secondary devices therefore have completely orthogonal register sets;
each is individually accessible and they do not share registers.
Multiple CODEC AC-link implementations must run off a common BIT_CLK. They can potentially
save Controller pins by sharing SYNC, SDATA_OUT, and RESET# from the AC‘97 Digital Controller. Each device requires its own SDATA_IN pin back to the Controller. This prevents contention of
multiple devices on one serial input line.
Support for multiple CODEC operation necessitates a specially designed Controller. An AC‘97 Digital Controller that supports multiple CODEC configurations implements multiple SDATA_IN inputs,
supporting one Primary CODEC and up to three Secondary CODECs.
4.3.1.
Primary CODEC Addressing
Primary AC‘97 CODECs respond to register read and write commands directed to CODEC ID 00.
Primary devices must be configurable (by hardwiring, strap pin(s), or other methods) as CODEC ID
00, and reflect this in the two-bit CODEC ID field(s) of the Extended Audio and/or Extended Modem
ID Register(s).
The Primary CODEC may either drive the BIT_CLK signal or consume a BIT_CLK signal provided
by the digital controller or other clock generator.
4.3.2.
Secondary CODEC Addressing
Secondary AC‘97 CODECs respond to register read and write commands directed to CODEC IDs
01, 10, or 11. Secondary devices must be configurable (via hardwiring, strap pin(s), or other methods) as CODEC IDs 01, 10, or 11 in the two-bit field(s) of the Extended Audio and/or Extended
Modem ID Register(s).
IDT™
22
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
STAC9766/9767
V 7.4 12/06
STAC9766/9767
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
PC AUDIO
CODECs configured as Secondary must power up with the BIT_CLK pin configured as an input.
Using the provided BIT_CLK signal is necessary to ensure that everything on the AC-link is synchronous. BIT_CLK is the clock source (multiplied by 2 so that the internal rate is 24.576 MHz).
4.3.3.
CODEC ID Strapping
Audio CODECs in the 48-pin package use pins 45 and 46 (defined as ID0# and ID1#) as strapping
(i.e. configuration) pins to configure the CODEC ID. The ID0# and ID1# strapping bits adopt inverted
polarity and default to 00 = Primary (via a weak internal pullup) when left floating. This eliminates the
need for external resistors for CODECs configured as Primary, and maintains backward compatibility with existing layouts that treat pins 45 and 46 as “no connect” or cap to ground. Pulldowns are
typically 1 KΩ - 10 KΩ and connected to Digital (not Analog) Ground.
Table 3. Recommended CODEC ID Strapping
4.4.
CID1 (pin 46)
CID0 (pin 45)
Configuration
NC (weak internal pullup)
NC (weak internal pullup)
Primary ID 00
NC (weak internal pullup)
pulldown
pulldown
NC (weak internal pullup)
Secondary ID 01
Secondary ID 10
pulldown
pulldown
Secondary ID 11
Clocking for Multiple CODEC Implementations
To keep the system synchronous, all Primary and Secondary CODEC clocking must be derived from
the same clock source, so they are operating on the same time base. In addition, all AC-link protocol
timing must be based on the BIT_CLK signal, to ensure that everything on the AC-link will be synchronous.
The following are potential 24.576 MHz clock options available to a Secondary CODEC:
•
Using an external 24.576 MHz signal source (external oscillator or AC‘97 Digital Controller)
•
Using the Primary’s XTAL_OUT
•
Using the Primary’s BIT_CLK output to derive 24.576 MHz
See section 2.2.3: page14 for clock frequencies supported and configurations.
4.4.1.
STAC9766/9767 as a Primary CODEC
Primary devices are required to support correctly either of the following clocking options:
•
24.576 MHz crystal attached to XTAL_IN and XTAL_OUT
•
24.576 MHz external oscillator provided to XTAL_IN
•
12.288 MHz oscillator provided to the BIT_CLK input
The Primary device may also optionally support the following clocking option:
•
14.318 MHz external oscillator provided to XTAL_IN
See section 2.2.3: page14 for clock frequencies supported and configurations.
IDT™
23
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
STAC9766/9767
V 7.4 12/06
STAC9766/9767
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
4.4.2.
PC AUDIO
STAC9766/9767 as a Secondary CODEC
Secondary devices are required to function correctly using one or more of the following clocking
options:
•
24.576 MHz external oscillator provided to XTAL_IN (synchronous and in phase with Primary
24.576 MHz clock)
•
BIT_CLK input provided by the Primary. In this mode, a clock at XTAL_IN (Pin 2) is ignored.
See section 2.2.3: page14 for clock frequencies supported and configurations.
4.5.
AC-link Power Management
4.5.1.
Powering down the AC-link
The AC-link signals can be placed in a low power mode. When AC‘97’s Powerdown Register (26h)
is programmed to the appropriate value, both BIT_CLK and SDATA_IN are brought to and held at a
logic low voltage level. After signaling a reset to AC‘97, the AC‘97 Controller should not attempt to
play or capture audio data until it has sampled a CODEC Ready indication from AC‘97.
Figure 13. STAC9766/9767 Powerdown Timing
SYNC
BIT_CLK
SDATA_OUT
slot 2
per
frame
TAG
SDATA_IN
slot 2
per
frame
TAG
Write to
0x20
DATA
PR4
Note: BIT_CLK not to scale
BIT_CLK and SDATA_IN are transitioned low immediately following decode of the write to the Powerdown Register (26h) with PR4. When the AC‘97 Controller driver is at the point where it is ready to
program the AC-link into its low power mode, slots 1 and 2 are assumed to be the only valid stream
in the audio output frame.
After programming the AC‘97 device to this low power, halted mode, the AC‘97 Controller is required
to drive and keep SYNC and SDATA_OUT low.
Once the AC‘97 CODEC has been instructed to halt BIT_CLK, a special “wake-up” protocol must be
used to bring the AC-link to the active mode, since normal audio output and input frames can not be
communicated in the absence of BIT_CLK.
4.5.2.
Waking up the AC-link
There are two methods for bringing the AC-link out of a low power, halted mode. Regardless of the
method, it is the AC‘97 Controller that performs the wake-up task.
IDT™
24
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
STAC9766/9767
V 7.4 12/06
STAC9766/9767
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
PC AUDIO
AC-link protocol provides for a “Cold AC‘97 Reset”, and a “Warm AC‘97 Reset”. The current power
down state would ultimately dictate which form of AC‘97 reset is appropriate. Unless a “cold” or “register” reset (a write to the Reset Register) is performed, wherein the AC‘97 registers are initialized to
their default values, registers are required to keep state during all power down modes.
Once powered down, re-activation of the AC-link via re-assertion of the SYNC signal must not occur
for a minimum of four audio frame times following the frame in which the power down was triggered.
When AC-link powers up the CODEC indicates readiness via the CODEC Ready bit (input slot 0, bit
15).
4.5.3.
CODEC Triggers Wake-up
The STAC9766/9767 (running off Vaux) can trigger a wake event (PME#) by transitioning
SDATA_IN from low to high and holding it high until either a warm or cold reset is observed on the
AC-link. This functionality is typically implemented in modem CODECs that detect ring, Caller ID,
etc.
Note that when the AC-link is either programmed to the low power mode or shut off completely,
BIT_CLK may stop if the primary CODEC is supplying the clock, which shuts down the AC-link clock
to the Secondary CODEC1 . In order for a Secondary CODEC to react to an external event (phone
ringing), it must support an independent clocking scheme for any PME# associated logic that must
be kept alive when the AC-link is down. This includes logic to asynchronously drive SDATA_IN to a
logic high-level which signals a wake request to the AC‘97 Digital Controller.
4.5.4.
CODEC Reset
There are three types of AC‘97 reset:
•
A cold reset where all AC‘97 logic (most registers included) is initialized to its default state.
•
A warm reset where the contents of the AC‘97 register set are left unaltered.
•
A register reset which only initializes the AC‘97 registers to their default states.
4.5.4.1.
Cold AC‘97 Reset
A cold reset is achieved by asserting RESET# low for the minimum specified time, then subsequently de-asserting RESET# high. BIT_CLK and SDATA_IN will be activated, or re-activated as the
case may be, and all AC‘97 control registers will be initialized to their default power-on reset values.
RESET# is an asynchronous AC‘97 input.
4.5.4.2.
Warm AC‘97 Reset
A warm AC‘97 reset will re-activate the AC-link without altering the current AC‘97 register values. A
warm reset is signaled by driving SYNC high for a minimum of 1 µs in the absence of BIT_CLK.
1.
IDT™
Secondary CODEC always configures its BIT_CLK pin as an input.
25
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
STAC9766/9767
V 7.4 12/06
STAC9766/9767
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
PC AUDIO
Within normal audio frames SYNC is a synchronous AC‘97 input. However, in the absence of
BIT_CLK, SYNC is treated as an asynchronous input used in the generation of a warm reset to
AC‘97.
AC‘97 MUST NOT respond with the activation of BIT_CLK until SYNC has been sampled low again
by AC‘97. This will preclude the false detection of a new audio frame.
4.5.4.3.
Register AC‘97 Reset
Most registers in an AC device can be restored to their default values by performing a write (any
value) to the Reset Register, 00h.
IDT™
26
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
STAC9766/9767
V 7.4 12/06
STAC9766/9767
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
PC AUDIO
5. AC-LINK DIGITAL INTERFACE
5.1.
Overview
AC-link is the 5 pin digital serial interface that links AC‘97 CODEC to Controller. The AC-link protocol
is a bi-directional, fixed clock rate, serial digital stream. AC-link handles multiple input and output
PCM audio streams, as well as control register accesses, employing a time division multiplexed
(TDM) scheme that divides each audio frame into 12 outgoing and 12 incoming data streams, each
with 20-bit sample resolution.
The STAC9766/9767 DACs, ADCs and SPDIF can be assigned to slots 3&4, 6&9, 7&8 or 10&11.
Figure 14. Bi-directional AC-link Frame with Slot Assignments
SLOTS
0
1
2
3
4
5
6
7
8
9
10
11
12
TAG
CMD
ADDR
CMD
DATA
PCM
LEFT
PCM
RT
NA
PCM
CTR
PCM
LSURR
PCM
RSURR
PCM
LFE
SPDIF
SPDIF
IO
CTRL
PCM
LEFT
PCM
RT
LINE1
ADC
PCM
MIC
Vendor
RSVD
Vendor
RSVD
Vendor
RSVD
LINE2
ADC
HSET
ADC
IO
STATUS
SYNC
OUTGOING STREAMS
(Controller output - SDATA_OUT)
TAG
INCOMING STREAMS
STATUS STATUS
ADDR
DATA
(codec output - SDATA_IN)
TAG PHASE
DATA PHASE
Slot 12 can be used by the
AC'97 Codec if a Modem
Codec is not present.
Table 4. AC-link Output Slots (Transmitted from the Controller)
Slot
Name
Description
0
SDATA_OUT TAG
1
Control CMD ADDR write port
MSBs indicate which slots contain valid data; LSBs convey
CODEC ID
Read/write command bit plus 7-bit CODEC register address
2
Control DATA write port
16-bit command register write data
3, 4
5
PCM L&R DAC playback
Modem Line 1 DAC
20-bit PCM data for Left and Right channels
16-bit modem data for modem Line 1 output
6, 7, 8, 9 PCM Center, Surround L&R, LFE 20-bit PCM data for Center, Surround L&R, LFE channels
IDT™
10
11
Modem Line 2 DAC
Modem handset DAC
16-bit modem data for modem Line 2 output
16-bit modem data for modem Handset output
12
Modem IO control
GPIO write port for modem Control
12
10-11
CODEC IRQ
SPDIF Out
Can be used by CODEC if a modem CODEC is not present.
Optional AC-link bandwidth for SPDIF output
10-12
Double rate audio
Optional AC-link bandwidth for 88.26KHz or 96KHz on L, C, R
channels
27
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
STAC9766/9767
V 7.4 12/06
STAC9766/9767
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
PC AUDIO
Table 5. The AC-link input slots (transmitted from the CODEC)
5.2.
Slot
Name
Description
0
1
SDATA_IN TAG
STATUS ADDR read port
MSBs indicate which slots contain valid data
MSBs echo register address; LSBs indicate which slots request data
2
STATUS DATA read port
16-bit command register read data
3, 4
5
PCM L&R ADC record
Modem Line 1 ADC
20-bit PCM data from Left and Right inputs
16-bit modem data from modem Line1 input
6-11
PCM ADC Record
20-bit PCM data - Alternative Slots for Input
12
GPIO Status
GPIO read port and interrupt status
AC-link Serial Interface Protocol
The AC‘97 Controller signals synchronization of all AC-link data transactions. The AC‘97 CODEC,
Controller, or external clock source drives the serial bit clock (BIT_CLK) onto the AC-link, which the
AC‘97 Controller then qualifies with a synchronization signal to construct audio frames. SYNC, fixed
at 48 KHz, is derived by dividing down the serial bit clock (BIT_CLK). BIT_CLK, fixed at 12.288 MHz,
provides the necessary clocking granularity to support twelve 20-bit outgoing and incoming time
slots. AC-link serial data is transitioned on each rising edge of BIT_CLK. The receiver of AC-link
data (CODEC for outgoing data and Controller for incoming data) samples each serial bit on the falling edges of BIT_CLK.
The AC-link protocol provides for a special 16-bit time slot (Slot 0) wherein each bit conveys a valid
tag for its corresponding time slot within the current audio frame. A 1 in a given bit position of slot 0
indicates that the corresponding time slot within the current audio frame has been assigned to a data
stream, and contains valid data. If a slot is tagged invalid, it is the responsibility of the source of the
data, (AC‘97 CODEC for the input stream, AC‘97 Controller for the output stream), to stuff all bit
positions with 0 during that slot’s active time.
SYNC remains high for a total duration of 16 BIT_CLKs at the beginning of each audio frame. The
portion of the audio frame where SYNC is high is defined as the “Tag Phase”. The remainder of the
audio frame where SYNC is low is defined as the “Data Phase”.
Additionally, for power savings, BIT_CLK, SYNC, and all data signals can be halted. This requires
that an AC‘97 CODEC be implemented as a static design to allow its register contents to remain
intact when entering a power savings mode.
5.2.1.
AC-link Variable Sample Rate Operation
The AC-link serial interconnect defines a digital data and control pipe between the Controller and the
CODEC. The AC-link supports twelve 20-bit slots at 48 KHz on SDATA_IN and SDATA_OUT. The
time division multiplexed (TDM) “slot-based” architecture supports a per-slot valid tag infrastructure
that the source of each slot’s data sets or clears to indicate the validity of the slot data within the current audio frame. This tag infrastructure can be used to support transfers between Controller and
CODEC at any sample rate.
IDT™
28
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
STAC9766/9767
V 7.4 12/06
STAC9766/9767
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
5.2.2.
PC AUDIO
Variable Sample Rate Signaling Protocol
AC-link’s tag infrastructure imposes FIFO requirements on both sides of the AC-link. For example, in
passing a 44.1 KHz stream across the AC-link, for every 480 audio output frames that are sent
across, 441 of them must contain valid sample data. Does the AC‘97 Digital Controller pass all 441
PCM samples followed by 39 invalid slots? Or does the AC‘97 Digital Controller evenly interleave
valid and non-valid slots? Each possible method brings with it different FIFO requirements. To
achieve interoperability between AC‘97 Digital Controllers and CODECs designed by different manufacturers, it is necessary to standardize the scheme for at least one side of the AC-link so that the
FIFO requirements will be common to all designs. The CODEC side of the AC-link is the focus of this
standardization.
The new standard approach calls for the addition of “on demand” slot request flags. These flags are
passed from the CODEC to the AC‘97 Digital Controller during every audio input frame. Each time
the AC‘97 Digital Controller sees one or more of the newly-defined slot request flags set active (low)
in a given audio input frame, it knows that it must pass along the next PCM sample for the corresponding slot(s) in the AC-link output frame that immediately follows.
The VRA (Variable Rate Audio) bit in the Extended Audio Status and Control Register must be set to
1 to enable variable sample rate audio operation. Setting the VRA = 1 has two functions:
1.
Enables PCM DAC/ADC conversions at variable sample rates by write enabling Sample Rate
Registers 2C-34h.
2.
Enables the on-demand CODEC-to-Controller signaling protocol using SLOTREQ bits that
becomes necessary when a DACs sample rate varies from the 48 KHz AC-link serial frame rate
The table below summarizes the behavior:
Table 6. VRA Behavior
AC‘97 Functionality
VRA = 0
VRA = 1
SLOTREQ bits
sample rate registers
always 0 (data each frame)
forced to 48 KHz
0 or 1 (data on demand)
writable
Note: If more than one CODEC is being used with the SAME controller DMA engine, VRA should
NOT be used.
For variable sample rate output, the CODEC examines its sample rate control registers, the state of
its FIFOs, and the incoming SDATA_OUT tag bits at the beginning of each AC-link output frame to
determine which SLOTREQ bits to set active (low). SLOTREQ bits asserted during the current
AC-link input frame signal which active output slots require data from the AC‘97 Digital Controller in
the next audio output frame. An active output slot is defined as any slot supported by the CODEC
that is not in a power-down state. For fixed 48 KHz operation the SLOTREQ bits are always set
active (low) and a sample is transferred in each frame.
For variable sample rate input, the tag bit for each input slot indicates whether valid data is present
or not. Thus, even in variable sample rate mode, the CODEC is always the master: for SDATA_IN
(CODEC to Controller), the CODEC sets the TAG bit; for SDATA_OUT (Controller to CODEC), the
CODEC sets the SLOTREQ bit and then checks for the TAG bit in the next frame.
IDT™
29
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
STAC9766/9767
V 7.4 12/06
STAC9766/9767
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
PC AUDIO
The VRM (Variable Rate Mic Audio) bit in the Extended Audio Status and Control Register controls
the optional MIC ADC input behavior in the same way that VRA = 1 controls the PCM ADC.
5.2.3.
SLOTREQ Behavior and Power Management
SLOTREQ bits for fixed rate, powered down, and all unsupported slots should be driven with 0 for
maximum compatibility with the original AC '97 Component Specification. When a DAC channel is
powered down, it disappears completely from the serial frame: output tag and slot are ignored, and
the SLOTREQ bit is absent (forced to zero).
When the Controller wants to power-down a channel, all it needs to do is:
1.
Disable source of DAC samples in Controller.
2.
Set PR bit for DAC channel in Registers 26h, 2Ah, or 3Eh.
When it wants to power up the channel, all it needs to do is:
5.2.4.
1.
Clear PR bit for DAC channel in Registers 26h, 2Ah, or 3Eh.
2.
Enable source of DAC samples in Controller.
Primary and Secondary CODEC Register Addressing
The 2-bit CODEC ID field in the LSBs of Output Slot 0 is an addition to the original AC-link protocol
that enables an AC‘97 Digital Controller to independently access Primary and Secondary CODEC
registers.
For Primary CODEC access, the AC‘97 Digital Controller:
1.
Sets the AC-link Frame valid bit (Slot 0, bit 15).
2.
Validates the tag bits for Slot 1 and 2 Command Address and Data (Slot 0, bits 14 and 13).
3.
Sets a zero value (00) into the CODEC ID field (Slot 0, bits 1 and 0).
4.
Transmits the desired Primary CODEC Command Address and Command Data in Slots 1 and
2.
For Secondary CODEC access, the AC‘97 Digital Controller:
1.
Sets the AC-link Frame valid bit (Slot 0, bit 15).
2.
Places a non-zero value (01, 10, or 11) into the CODEC ID field (Slot 0, bits 1 and 0).
3.
Transmits the desired Secondary CODEC Command Address and Command Data in Slots 1
and 2.
Secondary CODECs disregard the Command Address and Command Data (Slot 0, bits 14 and 13)
tag bits. In a sense the Secondary CODEC ID field functions as an alternative Valid Command
Address (for Secondary reads and writes) and Command Data (for Secondary writes) tag indicator.
Secondary CODECs must monitor the Frame Valid bit, and ignore the frame (regardless of the state
of the Secondary CODEC ID bits) if it is not valid. AC‘97 Digital Controllers should set the frame valid
bit for a frame with a Secondary register access, even if no other bits in the output tag slot except the
Secondary CODEC ID bits are set.
IDT™
30
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
STAC9766/9767
V 7.4 12/06
STAC9766/9767
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
5.3.
PC AUDIO
AC-link Output Frame (SDATA_OUT)
The AC-link output frame data streams correspond to the multiplexed bundles of all digital output
data targeting AC‘97’s DAC inputs, and control registers. As mentioned earlier, each AC-link output
frame supports up to twelve 20-bit outgoing data time slots. Slot 0 is a special reserved time slot
containing 16-bits which are used for AC-link protocol infrastructure.
Figure 15 illustrates the time slot based AC-link protocol.
Figure 15. AC-Link Audio Output Frame
Data Phase
Tag Phase
SYNC
20.8 uS (48 kHZ)
12.288 MHz
BIT_CLK
SDATA_OUT
valid
Frame
slot1 slot2
slot(12)
"0"
CID1
CID0
19
"0"
19
"0"
19
"0"
19
"0"
End of previous audio frame
Time Slot "Valid" Bits
Slot 1
Slot 2
Slot 3
Slot 12
("1" = time slot contains valid PCM data)
A new AC-link output frame begins with a low to high transition of SYNC. SYNC is synchronous to
the rising edge of BIT_CLK. On the immediately following falling edge of BIT_CLK, the AC‘97
CODEC samples the assertion of SYNC. This falling edge marks the time when both sides of
AC-link are aware of the start of a new audio frame. On the next rising of BIT_CLK, the AC‘97 Controller transitions SDATA_OUT into the first bit position of slot 0 (Valid Frame bit). Each new bit position is presented to AC-link on a rising edge of BIT_CLK, and subsequently sampled by the AC‘97
CODEC on the following falling edge of BIT_CLK. This sequence ensures that data transitions and
subsequent sample points for both incoming and outgoing data streams are time aligned.
Figure 16. Start of an Audio Output Frame
SYNC
asserted
SYNC
detected by
codec
first
SDATA_OUT
bit of frame
SYNC
BIT_CLK
valid
Frame
SDATA_OUT
slot1
slot2
End of previous audio frame
SDATA_OUT’s composite stream is MSB justified (MSB first) with all non-valid slots’ bit positions
stuffed with 0 by the AC‘97 Controller. If there are less than 20 valid bits within an assigned and valid
time slot, the AC‘97 Controller always stuffs all trailing non-valid bit positions of the 20-bit slot with 0.
As an example, consider an 8-bit sample stream that is being played out to one of the STAC9766/
9767 DACs. The first 8-bit positions are presented to the DAC (MSB justified) followed by the next
IDT™
31
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
STAC9766/9767
V 7.4 12/06
STAC9766/9767
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
PC AUDIO
12 bit positions, which are stuffed with 0 by the AC‘97 Controller. This ensures that regardless of the
resolution of the implemented DAC (16, 18 or 20-bit), no DC biasing will be introduced by the least
significant bits.
When mono audio sample streams are output from the AC‘97 Controller it is necessary that BOTH
left and right sample stream time slots be filled with the same data.
5.3.1.
Slot 0: TAG / CODEC ID
Table 7. Output Slot 0 Bit Definitions
Bit
Description
15
Frame Valid
14
13
Slot 1 Primary CODEC Valid Command Address bit (Primary CODEC only)
Slot 2 Primary CODEC Valid Command Data bit (Primary CODEC only)
Slot 3-12 Valid Data bits
12
11
Slot 3: PCM Left channel
Slot 4: PCM Right channel
10
Slot 5: Modem Line 1 (not used on STAC9766/9767)
9
Slot 6: Alternative PCM1 Left
8
7
Slot 7: Alternative PCM2 Left
Slot 8: Alternative PCM2 Right
6
Slot 9: Alternative PCM1 Right
5
4
Slot 10: SPDIF Left
Slot 11: SPDIF Right
3
Slot 12: Audio GPIO
2
1-0
Reserved (Set to 0)
2-bit CODEC ID field (00 reserved for Primary; 01, 10, 11 indicate Secondary)
Note: The DAC can be assigned to slots 3&4, 6&9, 7&8, or 10&11.
Within slot 0, the first bit is a global bit (SDATA_OUT slot 0, bit 15) which flags the validity for the
entire audio frame. If the “Valid Frame” bit is a 1, this indicates that the current audio frame contains
at least one time slot of valid data. The next 12 bit positions sampled by AC‘97 indicate which of the
corresponding 12 time slots contain valid data. In this way data streams of differing sample rates can
be transmitted across AC-link at its fixed 48 KHz audio frame rate.
The two LSBs of Slot 0 transmit the CODEC ID used to distinguish Primary and Secondary CODEC
register access.
5.3.2.
Slot 1: Command Address Port
The command port is used to control features, and monitor status (see AC-link input frame Slots 1
and 2) for AC‘97 CODEC functions including, but not limited to, mixer settings and power management (refer to the control register section of this specification).
IDT™
32
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
STAC9766/9767
V 7.4 12/06
STAC9766/9767
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
PC AUDIO
The control interface architecture supports up to 64 16-bit read/write registers, addressable on even
byte boundaries. Only the even registers (00h, 02h, etc.) are currently defined, odd registers (01h,
03h, etc.) are reserved for future expansion.
Note that shadowing of the control register file on the AC‘97 Controller is an option left open to the
implementation of the AC‘97 Controller. The AC‘97 CODEC’s control register file is nonetheless
required to be readable as well as writeable to provide more robust testability.
AC-link output frame slot 1 communicates control register address, and write/read command information to the STAC9766/9767.
Table 8. Command Address Port Bit Assignments
Bit
Description
Comments
19
18:12
Read/Write command
Control Register Index
1 = read, 0 = write
Sixty-four 16-bit locations, addressed on even byte boundaries
11:0
Reserved
Stuffed with 0s
The first bit (MSB) sampled by AC‘97 indicates whether the current control transaction is a read or a
write operation. The following 7 bit positions communicate the targeted control register address. The
trailing 12 bit positions within the slot are reserved and must be stuffed with 0s by the AC‘97 Controller.
5.3.3.
Slot 2: Command Data Port
The command data port is used to deliver 16-bit control register write data in the event that the current command port operation is a write cycle. (as indicated by Slot 1, bit 19)
• Bit(19:4)
Control Register Write Data
(Stuffed with 0 if current operation is a read)
• Bit(3:0)
Reserved
(Stuffed with 0)
If the current command port operation is a read, then the entire slot time must be stuffed with 0 by
the AC‘97 Controller.
5.3.4.
Slot 3: PCM Playback Left Channel
AC-link output frame slot 3 is the composite digital audio left playback stream. In a typical “Games
Compatible” PC this slot is composed of standard PCM (.wav) output samples digitally mixed (on the
AC‘97 Controller or host processor) with music synthesis output samples. If a sample stream of resolution less than 20-bits is transferred, the AC‘97 Controller must stuff all trailing non-valid bit positions within this time slot with 0.
The DAC can be assigned to slots 3&4, 6&9, 7&8, or 10&11.
5.3.5.
Slot 4: PCM Playback Right Channel
AC-link output frame slot 4 is the composite digital audio right playback stream. In a typical “Games
Compatible” PC this slot is composed of standard PCM (.wav) output samples digitally mixed (on the
AC‘97 Controller or host processor) with music synthesis output samples. If a sample stream of res-
IDT™
33
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
STAC9766/9767
V 7.4 12/06
STAC9766/9767
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
PC AUDIO
olution less than 20-bits is transferred, the AC‘97 Controller must stuff all trailing non-valid bit positions within this time slot with 0.
The DAC can be assigned to slots 3&4, 6&9, 7&8, or 10&11.
5.3.6.
Slot 5: Not Used by STAC9766/9767 (Modem Line 1 Output Channel)
Audio output frame slot 5 is reserved for modem operation and is not used by the STAC9766/9767 .
5.3.7.
Slot 6 -11: DAC
The DAC can be assigned to slots 3&4, 6&9, 7&8, or 10&11.
5.3.8.
Slot 12: Audio GPIO Control Channel
AC-link output frame slot 12 contains the audio GPIO control outputs.
5.4.
AC-link Input Frame (SDATA_IN)
The AC-link input frame data streams correspond to the multiplexed bundles of all digital input data
targeting the AC‘97 Controller. As is the case for audio output frame, each AC-link input frame consists of twelve 20-bit time slots. Slot 0 is a special reserved time slot containing 16-bits which are
used for AC-link protocol infrastructure.
The following diagram illustrates the time slot-based AC-link protocol.
Figure 17. STAC9766/9767 Audio Input Frame
Data Phase
Tag Phase
SYNC
20.8 uS (48 kHZ)
12.288 MHz
BIT_CLK
SDATA_IN
valid
Frame
slot1
slot2
slot(12)
"0"
"0"
"0"
19
"0"
19
"0"
19
"0"
19
"0"
End of previous audio frame
Time Slot "Valid" Bits
("1" = time slot contains valid PCM data)
Slot 1
Slot 2
Slot 3
Slot 12
A new AC-link input frame begins with a low to high transition of SYNC. SYNC is synchronous to the
rising edge of BIT_CLK. On the immediately following falling edge of BIT_CLK, the AC‘97 CODEC
samples the assertion of SYNC. This falling edge marks the time when both sides of AC-link are
aware of the start of a new audio frame. On the next rising of BIT_CLK, the AC‘97 CODEC transitions SDATA_IN into the first bit position of slot 0 (“CODEC Ready” bit). Each new bit position is presented to AC-link on a rising edge of BIT_CLK, and subsequently sampled by the AC‘97 Controller
on the following falling edge of BIT_CLK. This sequence ensures that data transitions and subsequent sample points for both incoming and outgoing data streams are time aligned.
IDT™
34
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
STAC9766/9767
V 7.4 12/06
STAC9766/9767
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
PC AUDIO
Figure 18. Start of an Audio Input Frame
SYNC
detected
first
SDATA_OUT
bit of frame
SYNC
BIT_CLK
Codec
Ready
SDATA_IN
slot1
slot2
End of previous audio frame
SDATA_IN’s composite stream is MSB justified (MSB first) with all non-valid bit positions (for
assigned and/or unassigned time slots) stuffed with 0 by the AC‘97 CODEC. SDATA_IN data is
sampled on the falling edges of BIT_CLK.
5.4.1.
Slot 0: TAG
Within slot 0 the first bit is a global bit (SDATA_IN slot 0, bit 15), which flags whether the AC‘97
CODEC is in the “CODEC Ready” state or not. If the “CODEC Ready” bit is a 0, this indicates that
the AC‘97 CODEC is not ready for normal operation. This condition is normal following the deassertion of power on reset for example, while the AC‘97 CODEC’s voltage references settle. When the
AC-link “CODEC Ready” indicator bit is a 1 it indicates that the AC-link and AC‘97 CODEC control
and status registers are in a fully operational state. CODEC must assert “CODEC Ready” within
400 µs after it starts receiving valid SYNC pulses from the controller, to provide indication of connection to the link and Control/Status registers are available for access. The AC`97 Controller and
related software must wait until all of the lower four bits of the Control/Status Register, 26h, are set
before attempting any register writes, or attempting to enable any audio stream, to avoid undesirable
audio artifacts.
Prior to any attempts at putting an AC‘97 CODEC into operation, the AC‘97 Controller should poll the
first bit in the AC-link input frame (SDATA_IN slot 0, bit 15) for an indication that CODEC has gone
“CODEC Ready”. Once an AC‘97 CODEC is sampled “CODEC Ready” 1 , then the next 12 bit positions sampled by the AC‘97 Controller indicate which of the corresponding 12 time slots are
assigned to input data streams and contain valid data.
5.4.2.
Slot 1: Status Address Port / SLOTREQ signaling bits
5.4.2.1.
Status Address Port
The status port is used to monitor status for the STAC9766/9767 functions including, but not limited
to, mixer settings and power management. AC-link input frame slot 1’s stream echoes the control
1. There are several subsections within an AC‘97 CODEC that can independently go busy/ready. It is the responsibility of the AC’97
controller to probe more deeply into the AC‘97 CODEC’s register file to determine which subsections are actually ready (refer to
section 6.3 for more information).
IDT™
35
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
STAC9766/9767
V 7.4 12/06
STAC9766/9767
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
PC AUDIO
register index, for historical reference, for the data to be returned in slot 2. (Assuming that slots 1
and 2 had been tagged “valid” by the AC‘97 CODEC during slot 0.
Table 9. Status Address Port Bit Assignments
Bit
Description
Comments
19
18:12
Reserved
Control Register Index
11:2
SLOTREQ
See Next Section
1:0
Reserved
Stuffed with 0
Stuffed with 0
Echo of register index for which data is being returned
The first bit (MSB) generated by AC‘97 is always stuffed with a 0. The following 7 bit positions communicate the associated control register address, the next 10 bits support AC‘97’s variable sample
rate signaling protocol, and the trailing 2 bit positions are stuffed with 0 by AC‘97.
5.4.2.2.
SLOTREQ signaling bits
AC-link input frame Slot 1, the Status Address Port, now delivers CODEC control register read
address and variable sample rate slot request flags for all output slots. Ten of the formerly reserved
least significant bits have been defined as data request flags for output slots 3-12.
The AC-link input frame Slot 1 tag bit is independent of the bit 11-2 slot request field, and ONLY indicates valid Status Address Port data (Control Register Index). The CODEC should only set
SDATA_IN tag bits for Slot 1 (Address) and Slot 2 (Data) to 1 when returning valid data from a previous register read. They should otherwise be set to 0. SLOTREQ bits have validity independent of the
Slot 1 tag bit.
SLOTREQ bits are always 0 in the following cases
•
Fixed rate mode (VRA = 0)
•
Inactive (powered down) ADC channel
SLOTREQ bits are only set to 1 by the CODEC in the following case
•
5.4.3.
Variable rate audio mode (VRA = 1) AND active (power ready) ADC AND a non-48 KHz ADC
sample rate and CODEC does not need a sample
Slot 2: Status Data Port
The status data port delivers 16-bit control register read data.
Table 10. Status Data Port Bit Assignments
Bit
19:4
Description
Control Register Read Data
3:0
Reserved
Comments
Stuffed with 0 if tagged “invalid”
Stuffed with 0
If Slot 2 is tagged invalid by AC‘97, then the entire slot will be stuffed with 0 by AC‘97.
IDT™
36
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
STAC9766/9767
V 7.4 12/06
STAC9766/9767
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
5.4.4.
PC AUDIO
Slot 3: PCM Record Left Channel
Audio input frame slot 3 is the left channel output of STAC9766/9767 input MUX, post-ADC.
STAC9766/9767 ADCs are implemented to support 20-bit resolution.
NOTE: The ADC can be assigned to slots 3&4, 6&9, 7&8, or 10&11.
5.4.5.
Slot 4: PCM Record Right Channel
Audio input frame slot 4 is the right channel output of STAC9766/9767 input MUX, post-ADC.
STAC9766/9767 ADCs are implemented to support 20-bit resolution.
NOTE: The ADC can be assigned to slots 3&4, 6&9, 7&8, or 10&11.
5.4.6.
Slot 5: Modem Line 1 ADC
Audio input frame slot 5 is not used by the STAC9766/9767 and is always stuffed with 0.
5.4.7.
Slot 6-9: ADC
The left and right ADC channels of the STAC9766/9767 may be assigned to slots 6&9 by Register
6Eh.
NOTE: The ADC can be assigned to slots 3&4, 6&9, 7&8, or 10&11.
5.4.8.
Slots 7-8: Vendor Reserved
The left and right ADC channels of the STAC9766/9767 may be assigned to slots 7&8 by Register
6Eh.
NOTE: The ADC can be assigned to slots 3&4, 6&9, 7&8, or 10&11.
5.4.9.
Slot 10 & 11: ADC
The left and right ADC channels of the STAC9766/9767 may be assigned to slots 10&11 by Register
6Eh.
NOTE: The ADC can be assigned to slots 3&4, 6&9, 7&8, or 10&11.
5.4.10.
Slot 12: Reserved
AC-link input frame slot 12 contains the GPIO status inputs and allows for audio interrupts. Audio
output frame slot 12 is Reserved for modem operations and is not used by the STAC9766/9767.
IDT™
37
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
STAC9766/9767
V 7.4 12/06
STAC9766/9767
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
5.5.
PC AUDIO
AC-link Interoperability Requirements and Recommendations
5.5.1.
“Atomic slot” Treatment of Slot 1 Address and Slot 2 Data
Command or Status Address and Data cannot be split across multiple AC-link frames. The following
transactions require that valid Slot 1 Address and valid Slot 2 Data be treated as “atomic” (inseparable) with Slot 0 Tag bits for Address and Data set accordingly (that is, both valid):
1.
AC‘97 Digital Controller write commands to Primary CODECs
2.
AC‘97 CODEC status responses
Whenever the AC‘97 Digital Controller addresses a Primary CODEC or an AC‘97 CODEC responds
to a read command, Slot 0 Tag bits should always be set to indicate actual Slot 1 and Slot 2 data
validity.
Table 11. Primary CODEC Addressing: Slot 0 Tag Bits
Slot 0, bit 15
(Valid Frame)
Slot 0, bit 14
(Valid Slot 1 Address)
Slot 0, bit 13
(Valid Slot 2 Data)
Slot 0, Bits 1-0
(CODEC ID)
AC‘97 Digital Controller
Primary Read Frame N,
SDATA_OUT
1
1
0
00
AC‘97 Digital Controller
Primary Write Frame N,
SDATA_OUT
1
1
1
00
AC‘97 CODEC Status
Frame N+1,
SDATA_IN
1
1
1
00
Function
When the AC‘97 Digital Controller addresses a Secondary CODEC, the Slot 0 Tag bits for Address
and Data must be 0. A non-zero, 2-bit CODEC ID in the LSBs of Slot 0 indicates a valid Read or
Write Address in Slot 1, and the Slot 1 R/W bit indicates presence or absence of valid data in Slot 2.
Table 12. Secondary CODEC Addressing: Slot 0 tag bits
IDT™
Function
Slot 0, bit 15
(Valid Frame)
Slot 0, bit 14
(Valid Slot 1 Address)
Slot 0, bit 13
(Valid Slot 2 Data)
Slot 0, Bits 1-0
(CODEC ID)
AC‘97 Digital Controller
Secondary Read Frame N,
SDATA_OUT
1
0
0
01, 10, or 11
AC‘97 Digital Controller
Secondary Write Frame N,
SDATA_OUT
1
0
0
01, 10, or 11
AC‘97 CODEC Status
Frame N+1,
SDATA_IN
1
1
1
00
38
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
STAC9766/9767
V 7.4 12/06
STAC9766/9767
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
5.6.
PC AUDIO
Slot Assignments for Audio
Figure 19. Bi-directional AC-link Frame with Slot assignments
SLOTS
0
1
2
3
4
5
6
7
TAG
CMD
ADDR
CMD
DATA
PCM
LEFT
PCM
RT
NA
PCM
CTR
TAG
STATUS
ADDR
STATUS
DATA
PCM
LEFT
PCM
RT
LINE1
ADC
PCM
MIC
8
9
10
11
12
PCM
LSURR
PCM
RSURR
PCM
LFE
SPDIF
SPDIF
IO
CTRL
Vendor
RSVD
Vendor
RSVD
Vendor
RSVD
LINE2
ADC
HSET
ADC
IO
STATUS
SYNC
OUTGOING STREAMS
(Controller output - SDATA_OUT)
INCOMING STREAMS
(codec output - SDATA_IN)
TAG PHASE
DATA PHASE
Slot 12 can be used by the
AC'97 Codec if a Modem
Codec is not present.
Note: The DAC & ADC can be assigned to slots 3&4, 6&9, 7&8, or 10&11.
The AC-link input slots (transmitted to the Codec) are defined as follows:
Table 13. AC-link Input Slots To CODEC
Slot
0
1
2
3,4
Name
SDATA_OUT TAG
Description
MSBs indicate which slots contain valid data; LSBs convey Codec ID
Control CMD ADDR write port Read/write command bit plus 7-bit Codec register address
Control DATA write port
PCM L & R DAC playback
16-bit command register write data
16, 18, or 20-bit PCM data for left and right channels
Modem Line 1 DAC
16-bit modem data for modem line 1 output
PCM Center, Rear, LFE
16, 18, or 20-bit PCM data for Center, L & R Rear, LFE channels
10
Modem Line 2 DAC
16-bit modem data for modem line 2 output
11
12
Modem handset DAC
Modem IO control
16-bit modem data for modem handset output
GPIO write port for modem control
5
6, 7,
8, 9
10-12 Double rate audio
Optional AC-link bandwidth for 88.2 or 96 kHz on L, C, R channels
The AC-link input slots (transmitted from the Codec) are defined as follows:
Table 14. AC-link Input Slots From CODEC
Slot
Description
SDATA_IN TAG
MSBs indicate which slots contain valid data
1
2
STATUS ADDR read port
STATUS DATA read port
MSBs echo register address; LSBs indicate which slots request data
16-bit command register read data
PCM L & R ADC record
16-bit PCM data from left and right inputs
Modem Line 1 ADC
Dedicated Microphone ADC
16-bit modem data from modem line 1 input
16-bit PCM data from optional 3rd ADC input
3,4
5
6
IDT™
Name
0
39
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
STAC9766/9767
V 7.4 12/06
STAC9766/9767
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
PC AUDIO
Table 14. AC-link Input Slots From CODEC
Slot
Name
Description
7, 8, 9 Vendor reserved
10
Modem Line 2 ADC
Vendor specific (enhanced input for docking, array mic, etc.)
16-bit modem data from modem line 2 input
11
Modem handset input
16-bit modem data for modem handset input
12
Modem IO status
GPIO read port for modem control
The AC-link output slots dedicated to audio are defined as follows:
Table 15. AC-link Output Slots Dedicated To Audio
Slot
Name
Description
3
4
PCM L DAC playback
PCM R DAC playback
20-bit PCM data for left channel
20-bit PCM data for right channel
6
PCM Center
20-bit PCM data for Center channel
7
8
PCM L Surround
PCM R Surround
20-bit PCM data for L Surround channel
20-bit PCM data for R Surround channel
9
PCM LFE
20-bit PCM data for LFE channel
10:11
12
SPDIF Out
Reserved
20-bit SPDIF Output
Reserved
The AC-link input slots dedicated to audio are defined as follows:
Table 16. AC-link Input Slots Dedicated To Audio
Slot
Name
Description
3
PCM L ADC record
20-bit PCM data from left input
4
6
PCM R ADC record
Dedicated Microphone ADC
20-bit PCM data from right inputs
20-bit PCM data from optional 3rd ADC input
7
Vendor reserved
vendor specific (enhanced input for docking, array mic, etc.)
8
9
Vendor reserved
Vendor reserved
vendor specific (enhanced input for docking, array mic, etc.)
vendor specific (enhanced input for docking, array mic, etc.)
12
Audio Interrupt
Provides optional interrupt capability for Audio CODEC (not usable
when a modem is present)
Note: The ADC can be assigned to slots 3&4, 6&9, 7&8, or 10&11.
Table 17. Audio Interrupt Slot Definitions
Bit
19-1
0
IDT™
Description
Reserved (Audio CODEC will return zeros in bits 19-1)
Optional: Assertion = 1 will cause interrupt to be propagated to Audio controller system
interrupt. See register 24h definition for enabling mechanism.
40
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
STAC9766/9767
V 7.4 12/06
STAC9766/9767
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
PC AUDIO
6. STAC9766/9767 MIXER
6.1.
Mixer Description
The STAC9766/9767 includes an analog mixer for maximum flexibility. The analog mixer is designed
to the AC'97 specification to manage the playback and record of all digital and analog audio sources
in the PC environment. The analog mixer also includes several extensions of the AC’97 specification
to support “all analog record” capability as well as “POP BYPASS” mode for all digital playback. The
analog sources include:
•
System Audio : Digital PCM input and output for business, games & multimedia
•
CD/DVD: Analog CD/DVD-ROM audio with internal connections to CODEC mixer
•
Stereo or Mono microphone: Choice of desktop mic, with programmable boost and gain
•
Speakerphone: Use of system mic and speakers for telephone, DSVD, and video conferencing
•
Video: TV tuner or video capture card with internal connections to CODEC mixer
•
AUX/Synth: Analog FM or wavetable synthesizer, or other internal source
•
Line in: External analog line level source from consumer audio, video camera, etc.
Source
IDT™
Function
Connection
PC_BEEP
PHONE
PC BEEP pass through to LINE_OUT
MONO input
From PC_BEEP output
From telephony subsystem
MIC1
Desktop microphone
From stereo or mono mic jack
MIC2
LINE_IN
Second microphone
External audio source
From stereo or second mono mic jack
From line-in jack
CD
Audio from CD-ROM
Cable from CD-ROM
VIDEO
AUX
Audio from TV tuner or video camera
Upgrade synth or other external source
Cable from TV or VidCap card
Internal connector
PCM out
Digital audio output from AC'97 Controller
AC-Link
Destination
HP_OUT
Function
Stereo mix of all sources
Connection
To headphone out jack
LINE_OUT
Stereo mix of all sources
To output jack
MONO_OUT
PCM in
Mic or MONO Analog mixer output
Digital data from the CODEC to the AC'97 Controller
To telephony subsystem
AC-Link
SPDIF
SPDIF digital audio output
To SPDIF output connector
41
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
STAC9766/9767
V 7.4 12/06
STAC9766/9767
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
6.2.
PC AUDIO
Mixer Functional Diagrams
Figure 20. STAC9766 2-Channel Mixer Functional Diagram
KEY
MonoAnalog
2Ah:D5-D4
Slot
Select
28h: D5-D4
PCM to
SPDIF
MUX
PCMOut
StereoAnalog
6Ah:D1
Slot
Select
20h:D13
22h:D2-D3
18h
DAC
vol
0Ah
PC_BEEP
0Ch
Phone
3D
vol
mute
vol
mute
0Eh:D6 & 6E:D2
MIC1
MIC2
0Eh
10, 20 or
30 dB
10h
LINEIN
12h
CD
16h
AUX
14h
mute
vol
mute
vol
mute
vol
mute
vol
mute
Headphone
Volume
HP_OUT
02h
Σ
20h:D13
22h:D2-D3
Σ
3D
20h:D15
Master
Volume
-6dB
LINE_OUT
06h
MUX
Σ
6Eh:D12
AllAnalog
vs
AllRecord
Mono
Volume
MONO_OUT
1Ah
-6dB
Σ
20h:D9
1Ch
MUX
VIDEO
vol
04h
Digital
PCBeep
MUX
Analog
Audio
Sources
mute
MUX
20h:D8
Digital
SPDIF
Record
Volume
38h:D5-D4
ADC
Slot
Select
PCMIn
ADCRecord
Figure 21. STAC9767 2-Channel Mixer Functional Diagram
KEY
MonoAnalog
2Ah:D5-D4
Slot
Select
28h: D5-D4
PCM to
SPDIF
MUX
PCMOut
StereoAnalog
6Ah:D1
Slot
Select
20h:D13
22h:D2-D3
18h
DAC
0Ah
PC_BEEP
0Ch
Phone
Analog
Audio
LINEIN
CD
AUX
vol
mute
vol
mute
0Eh:D6 & 6E:D2
10, 20 or
30 dB
0Eh
10h
12h
16h
14h
vol
mute
vol
mute
vol
mute
vol
mute
vol
mute
04h
Digital
PCBeep
Headphone
Volume
HP_OUT
02h
Σ
20h:D13
22h:D2-D3
3D
Σ
20h:D15
Master
Volume
-6dB
LINE_OUT
06h
MUX
Σ
6Eh:D12
AllAnalog
vs
AllRecord
Mono
Volume
MONO_OUT
1Ah
-6dB
Σ
20h:D9
1Ch
MUX
VIDEO
3D
MUX
Sources
mute
MUX
20h:D8
MIC1
MIC2
vol
Digital
SPDIF
Record
Volume
38h:D5-D4
ADC
Slot
Select
PCMIn
ADCRecord
IDT™
42
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
STAC9766/9767
V 7.4 12/06
STAC9766/9767
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
6.3.
PC AUDIO
Mixer Analog Input
The mixer provides recording and playback of any audio sources or output mix of all sources. The
STAC9766/9767 supports the following input sources:
•
Any mono or stereo source
•
Mono or stereo mix of all sources
•
Two-channel input with mono output reference (mic or stereo mix)
Note: All unused inputs should be tied together and connected to ground through a capacitor
(0.1 µF suggested).
Note: The MIC should be tied to ground separately through its own 0.1 µf capacitor.
6.4.
Mixer Analog Output
The Mixer generates three distinct outputs:
IDT™
•
A stereo mix of all sources for output to the LINE_OUT
•
A stereo mix of all sources for output to HP_OUT
•
A mono, mic only or mix of all sources for MONO_OUT
43
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
STAC9766/9767
V 7.4 12/06
STAC9766/9767
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
PC AUDIO
7. SPDIF AND PC BEEP
7.1.
SPDIF Digital Mux
The STAC9766/9767 incorporates a digital output that supports SPDIF formats. A multiplexer determines which of two digital input streams are used for the digital output conversion process. These
two streams include the PCM OUT data from the audio controller and the ADC recorded output. The
normal analog LINE_OUT signal can be converted to the SPDIF formats by using the internal ADC
to record the “MIX” output, which is the combination of all analog and all digital sources. In the case
of digital controllers with support for four or more channels, the SPDIF output mode can be used to
support compressed 6-channel output streams for delivery to home theater systems. These can be
routed on alternate AC-Link slots to the SPDIF output, while the standard 2-channel output is delivered as selected by bits D5 and D4 in Register 6E. If the digital controller supports 6 channels, a
SPDIF output with four analog channels can also be configured.
If the Digital Controller has independent DMA engines, SPDIF and Analog can be used simultaneously and independently.
7.2.
PC Beep Implementation
The STAC9766/9767 offers two styles of PC BEEP, Analog and Digital. The digital PC Beep is a
new feature added to the AC’97 Specification Rev 2.3. This style of PC Beep will eventually replace
the Analog style, thus eliminating the need for a PC Beep pin. Until this feature is widely accepted,
IDT will provide BOTH styles of PC Beep. Both PC Beep styles use Reg 0Ah. Additional information
about Reg0Ah can be found in Section8.1.5: page50.
7.2.1.
Analog PC Beep
PC Beep is active on power up and defaults to an un-muted state. The PC-BEEP input is routed
directly to the MONO_OUT, LINE_OUT and HP_OUT pins of the CODEC. Because the PC_BEEP
input drive is often a full scale digital signal, some resistive attenuation of the PC_BEEP input is recommended to keep the beep tone within reasonable volume levels. The user should mute this input
before using any other mixer input because the PC Beep input can contribute noise to the lineout
during normal operation. This style of PC Beep is related to the AC’97 Specification Rev 2.2. To use
the analog PC Beep, write a value of 00h to bits F[7:0](D[12:5]) to disable generation of the Digital
PC Beep. PV[3:0] (D[4:1]) controls the volume level from 0dB to 45dB of attenuation in 3dB steps.
7.2.2.
Digital PC Beep
The Digital PC Beep uses the identical register as the Analog style, Reg 0Ah. This register controls
the level and frequency for the PC Beep. The beep frequency is the result of dividing the 48 KHz
clock by 4 times the number specified in F[7:0], allowing tones from 47Hz to 12 KHz. A value of 00h
written to bits F[7:0] disables the digital PC Beep generation and enables the analog style PC Beep.
The volume control bits, PV[3:0] operate identically to the analog PC Beep mode. Applying a signal
to the PC Beep pin, pin 12, may cause the digital PC Beep signal to become distorted or inaudible.
When using the digital PC Beep feature, leave the PC Beep input pin unconnected or connected to
analog ground through a capacitor. Connecting a capacitor from the PC Beep input pin to ground will
create a more pleasing sound by changing the digital output to a more sinusoidal output.
IDT™
44
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
STAC9766/9767
V 7.4 12/06
STAC9766/9767
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
PC AUDIO
Table 18. Digital PC Beep Examples
Value
Reg 0Ah
Frequency
1
0x01
12,000Hz
10
25
0x0A
0x19
1200Hz
480Hz
50
0x32
240Hz
100
127
0x64
0x0F
120Hz
94.48Hz
255
0xFF
47.05Hz
This will be programmed directly by the BIOS.
IDT™
45
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
STAC9766/9767
V 7.4 12/06
STAC9766/9767
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
PC AUDIO
8. PROGRAMMING REGISTERS
Table 19. Programming Registers
Address
00h
Default
6A90h
Location
8.1.1; page47
02h
Master Volume
8000h
8.1.2; page48
04h
06h
HP_OUT Mixer Volume
Master Volume MONO
8000h
8000h
8.1.3; page48
8.1.4; page49
0Ah
PC Beep Mixer Volume
0000h
8.1.5; page50
0Ch
0Eh
Phone Mixer Volume
Mic Mixer Volume
8008h
8008h
8.1.6; page50
8.1.7; page51
10h
Line In Mixer Volume
8808h
8.1.8; page51
12h
14h
CD Mixer Volume
Video Mixer Volume
8808h
8808h
8.1.9; page52
8.1.10; page53
16h
Aux Mixer Volume
8808h
8.1.11; page53
18h
1Ah
PCM Out Mixer Volume
Record Select
8808h
0000h
8.1.12; page54
8.1.13; page54
1Ch
Record Gain
8000h
8.1.14; page55
20h
22h
General Purpose
3D Control
0000h
0000h
8.1.15; page56
8.1.16; page56
24h
Audio Int. & Paging
0000h
8.1.17: page57
26h
28h
Powerdown Ctrl/Stat
Extended Audio ID
000Fh
0A05h
8.1.18; page58
8.1.19; page59
2Ah
Extended Audio Control/Status
0400h*
8.1.20; page60
2Ch
32h
PCM DAC Rate
PCM LR ADC Rate
BB80h
BB80h
8.1.22; page63
8.1.23; page63
3Ah
SPDIF Control
2000h
8.1.24; page64
3Eh
4Ch
Extended Modem Stat/Ctrl
GPIO Pin Configuration
0100h
0003h
8.2.4; page66
8.2.5; page66
4Eh
GPIO Pin Polarity/Type
FFFFh
8.2.6; page66
50h
52h
GPIO Pin Sticky
GPIO Wake-up
0000h
0000h
8.2.7; page67
8.2.8; page67
54h
GPIO Pin Status
0000h
8.2.9; page67
60h
CODEC Class/Rev
62h (Page 01h) PCI SVID
1201h
FFFFh
8.3; page68
8.4.2; page70
64h (Page 01h) PCI SSID
FFFFh
8.4.3; page70
66h (Page 01h) Function Select
68h (Page 01h) Function Information
0000h
xxxxh
8.4.4; page71
8.4.5; page72
0000h
8.4.6; page74
6Ah (Page01h) Sense Details
6Ch
Revision Code
NA
xxxxh
8.4.7: page74
8.4.7; page74
6Ch (Page01h) Reserved
0000h
NA
1000h
8.4.9: page76
6Ah
6Eh
IDT™
Name
Reset
Digital Audio Control
Analog Special
46
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
STAC9766/9767
V 7.4 12/06
STAC9766/9767
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
PC AUDIO
Table 19. Programming Registers
Address
Name
6Eh (Page01h) Reserved
Default
Location
0000h
NA
70h
72h
Enable Register
Analog Current Adjust
0000h
0000h
NA
8.4.10; page77
74h
EAPD Access
0800h
8.4.11; page78
78h
7Ah
High Pass Filter Bypass
Reserved
0000h
NA
8.4.12; page79
NA
7Ch
Vendor ID1
8384h
8.5.1; page80
7Eh
Vendor ID2
7652h
8.5.2; page80
Note: * depends upon CODECID
8.1.
Register Descriptions
8.1.1.
Reset (00h)
Default: 6A90h
D15
D14
D13
D12
D11
D10
D9
D8
RSRVD
D7
SE4
D6
SE3
D5
SE2
D4
SE1
D3
SE0
D2
ID9
D1
ID8
D0
ID7
ID6
ID5
ID4
ID3
ID2
ID1
ID0
Writing any value to this register performs a register reset, which causes all registers to revert to
their default values. This register reset also resets all the digital block. Reading this register returns
the ID code of the part.
Bit(s)
15
14:10
9
8
7
6
5
4
3
2
1
0
IDT™
Reset Value
0
11010
1
0
1
0
0
1
0
0
0
0
Name
RESERVED
SE4:SE0
ID9
ID8
ID7
ID6
ID5
ID4
ID3
ID2
ID1
ID0
Description
Bit not used, should read back 0
IDT ID for SS3D
20 bit ADC resolution (supported)
18 bit ADC resolution
20 bit DAC resolution (supported)
18 bit DAC resolution
Loudness (bass boost)
Headphone out (supported)
Simulated stereo (mono to stereo)
Bass & treble control
Reserved
Dedicated MIC PCM in channel
47
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
STAC9766/9767
V 7.4 12/06
STAC9766/9767
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
8.1.2.
PC AUDIO
Master Volume Registers (02h)
Default: 8000h
D15
D14
D13
D12
D11
D10
D9
D8
Mute
D7
RSRVD
D6
ML5
D5
ML4
D4
ML3
D3
ML2
D2
ML1
D1
ML0
D0
MR5
MR4
MR3
MR2
MR1
MR0
RESERVED
Bit(s)
Reset Value
Name
15
1
Mute
14
0
RESERVED
13
0
ML5
12:8
0
ML<4:0>
7:6
0
RESERVED
5
0
MR5
4:0
0
MR<4:0>
8.1.3.
Description
0 = no mute
1 = Mutes both left & right channels
Bit not used, should read back 0
0 = Lineout attenuation is a function of bits12-8
1 = Forces register bits 12-8 to be 11111
Always reads back 0
Left Lineout Volume Control
00000 = 0dB attenuation
00001 = 1.5dB attenuation
.....
11111 = 46.5dB attenuation
Bits not used, should read back 0
0 = Lineout attenuation is a function of bits 4-0
1 = Forces register bits 4-0 to be 11111
Always reads back 0
Right Channel Lineout Volume Control
00000 =
0dB attenuation
00001 = 1.5dB attenuation
.....
11111 = 46.5dB attenuation
Headphone Volume Registers (04h)
Default: 8000h
D15
D14
D13
D12
D11
D10
D9
D8
Mute
RSRVD
HPL5
HPL4
HPL3
HPL2
HPL1
HPL0
D5
HPR5
D4
HPR4
D3
HPR3
D2
HPR2
D1
HPR1
D0
HPR0
D7
D6
RESERVED
IDT™
Bit(s)
Reset Value
Name
15
1
Mute
14
0
RESERVED
13
0
ML5
Description
0 = no mute
1 = Mutes both left & right channels
Bit not used, should read back 0
0 = Headphone attenuation is a function of bits12-8
1 = forces register bits 12-8 to be 11111
Always reads back 0
48
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
STAC9766/9767
V 7.4 12/06
STAC9766/9767
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
Bit(s)
Reset Value
Name
12:8
0
ML<4:0>
7:6
0
RESERVED
5
0
MR5
4:0
0
MR<4:0>
8.1.4.
PC AUDIO
Description
Left Headphone Volume Control
00000 =
0dB attenuation
00001 = 1.5dB attenuation
.....
11111 = 46.5dB attenuation
Bits not used, should read back 0
0 = Headphone attenuation is a function of bits 4-0
1 = forces register bits 4-0 to be 11111
Always reads back 0
Right Channel Headphone Volume Control
00000 =
0dB attenuation
00001 = 1.5dB attenuation
.....
11111 = 46.5dB attenuation
Master Volume MONO (06h)
Default: 8000h
D15
D14
D13
D12
Mute
D7
D6
RESERVED
IDT™
D11
D10
D9
D8
D2
MM2
D1
MM1
D0
MM0
RESERVED
D5
MM5
Bit(s)
Reset Value
Name
15
1
Mute
14:6
0
RESERVED
5
0
MM5
4:0
0
MM<4:0>
D4
MM4
D3
MM3
Description
0 = No mute
1 = Mute mono
Bit not used, should read back 0
0 = Mono attenuation is a function of bits 4-0
1 = Forces register bits 4-0 to be 11111
Always reads back 0
Mono Volume Control
00000 =
0dB attenuation
00001 = 1.5dB attenuation
.....
11111 = 46.5dB attenuation
49
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
STAC9766/9767
V 7.4 12/06
STAC9766/9767
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
8.1.5.
PC AUDIO
PC BEEP Volume (0Ah)
Default: 0000h
Additional information on the PC Beep can be found in Section 7.2: page44.
D15
D14
Mute
D7
D13
RESERVED
D6
D5
F2
F1
F0
Bit(s)
Reset Value
Name
15
1
Mute
14:13
0
RESERVED
12:5
00h
F[7:0]
4:1
0
PV(3:0)
0
0
RESERVED
8.1.6.
D12
D11
D10
D9
D8
F7
D4
F6
D3
F5
D2
F4
D1
F3
D0
PV3
PV2
PV1
PV0
RSRVD
Description
0 = No mute
1 = Mute PC BEEP
Bit not used, should read back 0
The Beep frequency is the result of dividing the 48KHz clock by 4 times
the number specified in F[7:0] allowing tones from 47Hz to 12KHz.
A value of 00h in bits F[7:0] disables internal PC BEEP generation and
enables external PC BEEP input if available.
PCBEEP Volume Control
0000 = 0dB attenuation
0001 = 3dB attenuation
.....
1111 = 45dB attenuation
Bit not used, should read back 0
Phone Volume (Index 0Ch)
Default: 8008h.
D15
D14
Mute
D7
D13
D6
D5
RESERVED
IDT™
Bit(s)
Reset Value
Name
15
1
Mute
14:5
0
RESERVED
4:0
0
GN<4:0>
D12
D11
D4
RESERVED
D3
D10
D9
D8
D2
D1
D0
GN4
GN3
GN2
GN1
GN0
Description
0 = No mute
1 = Mute phone
Bit not used, should read back 0
Phone Volume Control
00000 = 12dB gain
00001 = 10.5dB gain
.....
01000 =
0dB gain
.....
11111 = -34.5dB gain
50
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
STAC9766/9767
V 7.4 12/06
STAC9766/9767
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
8.1.7.
PC AUDIO
Stereo or Mic Volume (Index 0Eh)
To enable Stereo Mic, Register 78h (unlocked), bit D6 must be enabled.
In Stereo mode, the left and right volume are controlled by GN4:GN0.
Default: 8008h.
D15
Mute
D14
D13
D12
D11
RESERVED
D10
D9
D8
D7
D6
D5
D4
D3
D2
D1
D0
RESERVED
BOOSTEN
RESERVED
GN4
GN3
GN2
GN1
GN0
Bit(s)
Reset Value
Name
15
1
Mute
14:7
0
RESERVED
6
0
BOOSTEN
5
0
RESERVED
4:0
8.1.8.
0
GN<4:0>
Description
0 = no mute
1 = mute phone
Bit not used, should read back 0
Works with MICGAINVAL (Register 6Eh Bit D2)
BOOSTEN
MICGAINVAL =
Mic Gain Boost
0
0
=
0 dB
0
1
=
10 dB
1
0
=
20 dB
1
1
=
30 dB
Phone Volume Control
00000 = 12dB gain
00001 = 10.5dB gain
.....
01000 =
0dB gain
.....
11111 = -34.5dB gain
LineIn Volume (Index 10h)
Default: 8808h.
D15
D14
Mute
D7
D13
D12
D11
D10
D9
D8
RESERVED
D6
D5
GL4
D4
GL3
D3
GL2
D2
GL1
D1
GR0
D0
GR4
GR3
GR2
GR1
GR0
RESERVED
IDT™
Bit(s)
Reset Value
Name
15
1
Mute
14:13
0
RESERVED
12:8
0
GL<4:0>
Description
0 = No mute
1 = Mute linein
Bit not used, should read back 0
Left LineIn Volume Control
00000 = 12dB gain
00001 = 10.5dB gain
.....
01000 =
0dB gain
.....
11111 = -34.5dB gain
51
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
STAC9766/9767
V 7.4 12/06
STAC9766/9767
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
Bit(s)
7:5
Reset Value
0
Name
RESERVED
4:0
0
GR<4:0>
8.1.9.
PC AUDIO
Description
Bit not used, should read back 0
Right LineIn Volume Control
00000 = 12dB gain
00001 = 10.5dB gain
.....
01000 = 0dB gain
.....
11111 = -34.5dB gain
CD Volume (Index 12h)
Default: 8808h.
D15
D14
Mute
D7
D13
D12
D11
D10
D9
D8
RESERVED
D6
D5
GL4
D4
GL3
D3
GL2
D2
GL1
D1
GR0
D0
GR4
GR3
GR2
GR1
GR0
RESERVED
IDT™
Bit(s)
Reset Value
Name
15
1
Mute
14:13
0
RESERVED
12:8
0
GL<4:0>
7:5
0
RESERVED
4:0
0
GR<4:0>
Description
0 = No mute
1 = Mute CD
Bit not used, should read back 0
Left CD Volume Control
00000 = 12dB gain
00001 = 10.5dB gain
.....
01000 =
0dB gain
.....
11111 = -34.5dB gain
Bit not used, should read back 0
right CD Volume Control
00000 = 12dB gain
00001 = 10.5dB gain
.....
01000 =
0dB gain
.....
11111 = -34.5dB gain
52
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
STAC9766/9767
V 7.4 12/06
STAC9766/9767
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
8.1.10.
PC AUDIO
Video Volume (Index 14h)
Default: 8808h.
D15
D14
Mute
D7
D13
D12
D11
D10
D9
D8
RESERVED
D6
D5
GL4
D4
GL3
D3
GL2
D2
GL1
D1
GR0
D0
GR4
GR3
GR2
GR1
GR0
D9
GL1
D8
GR0
RESERVED
Bit(s)
Reset Value
Name
15
1
Mute
14:13
0
RESERVED
12:8
0
GL<4:0>
7:5
0
RESERVED
4:0
0
GR<4:0>
8.1.11.
Description
0 = No mute
1 = Mute video
Bit not used, should read back 0
Left Video Volume Control
00000 = 12dB gain
00001 = 10.5dB gain
.....
01000 =
0dB gain
.....
11111 = -34.5dB gain
Bit not used, should read back 0
Right video Volume Control
00000 = 12dB gain
00001 = 10.5dB gain
.....
01000 =
0dB gain
.....
11111 = -34.5dB gain
Aux Volume (Index 16h)
Default: 8808h.
D15
Mute
D14
D13
RESERVED
D7
D6
D5
RESERVED
IDT™
Bit(s)
Reset Value
Name
15
1
Mute
14:13
0
RESERVED
12:8
0
GL<4:0>
D12
GL4
D11
GL3
D10
GL2
D4
D3
D2
D1
D0
GR4
GR3
GR2
GR1
GR0
Description
0 = No mute
1 = Mute aux
Bit not used, should read back 0
Left Aux Volume Control
00000 = 12dB gain
00001 = 10.5dB gain
.....
01000 =
0dB gain
.....
11111 = -34.5dB gain
53
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
STAC9766/9767
V 7.4 12/06
STAC9766/9767
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
Bit(s)
7:5
Reset Value
0
Name
RESERVED
4:0
0
GR<4:0>
8.1.12.
PC AUDIO
Description
Bit not used, should read back 0
Right Aux Volume Control
00000 = 12dB gain
00001 = 10.5dB gain
.....
01000 =
0dB gain
.....
11111 = -34.5dB gain
PCMOut Volume (Index 18h)
Default: 8808h.
D15
Mute
D14
D13
RESERVED
D7
D6
D5
RESERVED
Bit(s)
Reset Value
Name
15
1
Mute
14:13
0
RESERVED
12:8
0
GL<4:0>
7:5
0
RESERVED
4:0
0
GR<4:0>
8.1.13.
D12
GL4
D11
GL3
D10
GL2
D9
GL1
D8
GR0
D4
D3
D2
D1
D0
GR4
GR3
GR2
GR1
GR0
D10
D9
D8
SL2
SL1
SL0
D2
SR2
D1
SR1
D0
SR0
Description
0 = No mute
1 = Mute PCM out
Bit not used, should read back 0
Left PCM Volume Control
00000 = 12dB gain
00001 = 10.5dB gain
.....
01000 =
0dB gain
.....
11111 = -34.5dB gain
Bit not used, should read back 0
Right PCM Volume Control
00000 = 12dB gain
00001 = 10.5dB gain
.....
01000 =
0dB gain
.....
11111 = -34.5dB gain
Record Select (1Ah)
Default: 0000h (corresponding to Mic in)
Used to select the record source independently for right and left.
D15
D14
D7
D6
D13
D12
D11
D4
D3
RESERVED
IDT™
D5
RESERVED
54
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
STAC9766/9767
V 7.4 12/06
STAC9766/9767
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
Bit(s)
15:11
Reset Value
0
Name
RESERVED
10:8
0
SL2:SL0
7:3
0
RESERVED
2:0
0
SR2:SR0
8.1.14.
PC AUDIO
Description
Bits not used, should read back 0
Left Channel Input Select
000 = Mic
001 = CD In (left)
010 = Video In (left)
011 = Aux In (left)
100 = Line In (left)
101 = Stereo Mix (left)
110 = Mono Mix
111 = Phone
Bits not used, should read back 0
Right Channel Input Select
000 = Mic
001 = CD In (right)
010 = Video In (right)
011 = Aux In (right)
100 = Line In (right)
101 = Stereo Mix (right)
110 = Mono Mix
111 = Phone
Record Gain (1Ch)
Default: 8000h (corresponding to 0 dB gain with mute on)
D15
Mute
D14
D13
RESERVED
D12
D11
GL3
D10
GL2
D9
GL1
D8
GL0
D7
D6
D5
D4
D3
D2
D1
D0
GR3
GR2
GR1
GR0
RESERVED
IDT™
Bit(s)
15
14:12
Reset Value
1
0
Name
MUTE
RESERVED
11:8
0
GL<3:0>
7:4
0
RESERVED
3:0
0
GR<3:0>
Description
Mutes Record Gain
Bits not used, should read back 0
Left Channel Volume Control
0000 =
0dB gain
0001 = 1.5dB gain
....
1111 = 22.5dB gain
Bits not used, should read back 0
Right Channel Volume Control
0000 =
0dB gain
0001 = 1.5dB gain
....
1111 = 22.5dB gain
55
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
STAC9766/9767
V 7.4 12/06
STAC9766/9767
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
8.1.15.
PC AUDIO
General Purpose (20h)
Default: 0000h
D15
D14
D13
POP BYP
D7
RESERVED
D6
3D
D5
D12
D11
D4
RESERVED
D3
LOOPBACK
D9
D8
D2
MIX
D1
MS
D0
RESERVED
Bit(s)
Reset
Value
Name
15
0
POP BYPASS
14
0
RESERVED
13
0
3D
12:10
9
8
0
0
0
RESERVED
MIX
MS
7
0
LOOPBACK
6:0
0
RESERVED
8.1.16.
D10
Description
0 = Normal
1 = DAC bypasses mixer and connects directly to Line Out, Headphone
Out and Mono Out.
Bit not used, should read back 0
0 = 3D Effect Disabled
1 = 3D Effect Enabled
Bit not used, should read back 0
Mono Output select (0 = Mix, 1 = Mic)
Mic select (0 = Mic1, 1 = Mic2)
1 = Enables ADC to DAC loopback test
0 = Loopback Disabled
Do not send in conflicting data on AC-LINK while running this.
Bit not used, should read back 0
3D Control (22h)
Default: 0000h
D15
D14
D13
D12
D11
D10
D9
D8
D7
D6
D5
RESERVED
D4
D3
D2
D1
D0
RESERVED
Bit(s)
15:4
Reset Value
0
Name
RESERVED
3:2
0
DP3,DP2
1:0
0
RESERVED
DP3
DP2
RESERVED
Description
Bits not used, should read back 0
LINE_OUT SEPARATION RATIO
DP3 DP2 effect
0
0
0 ( OFF )
0
1
3 ( LOW )
1
0
4.5 ( MED )
1
1
6 ( HIGH )
Bits not used, should read back 0
This register is used to control the 3D stereo enhancement function, IDT Surround 3D (SS3D), built
into the AC'97 component. Note that register bits DP3-DP2 are used to control the separation ratios
in the 3D control for LINE_OUT. SS3D provides for a wider soundstage extending beyond the normal 2-speaker arrangement. Note that the 3D bit in the general purpose register (20h) must be set to
1 to enable SS3D functionality to allow the bits in 22h to take effect.
IDT™
56
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
STAC9766/9767
V 7.4 12/06
STAC9766/9767
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
PC AUDIO
The three separation ratios are implemented. The separation ratio defines a series of equations that
determine the amount of depth difference (High, Medium, and Low) perceived during two-channel
playback. The ratios provide for options to narrow or widen the soundstage.
8.1.17.
Audio Interrupt and Paging (24h)
Default: 0000h
D15
D14
D13
D12
D11
D10
D9
D8
I4
D7
I3
D6
I2
D5
I1
D4
I0
D3
D2
RESERVED
D1
D0
PG3
PG2
PG1
PG0
RESERVED
Bit(s) Reset Value
IDT™
Access
Name
15
0
Read / Write
I4
14-13
0
Read Only
I3-I2
12
0
Read / Write
I1
11
0
Read / Write
I0
Description
0 = Interrupt is clear
1 = Interrupt is set
Interrupt event is cleared by writing a 1 to this bit.
The interrupt bit will change regardless of condition of interrupt
enable (I0) status. An interrupt in the GPI in slot 12 in the ACLink
will follow this bit change when interrupt enable (I0) is unmasked.
Interrupt Cause
00 = Reserved
01 = Sense cycle complete, sense info available.
10 = Change in GPIO input status
11 = Sense cycle complete and change in GPIO input status.
These bits will reflect the general cause of the first interrupt event
generated. It should be read after interrupt status has been
confirmed as interrupting. The information should be used to scan
possible interrupting events in proper pages.
Sense Cycle
0 = Sense Cycle not in Progress
1 = Sense Cycle Start.
Writing a 1 to this bit causes a sense-cycle start, if supported. If
sense cycle is not supported, this bit is read only.
Interrupt Enable
0 = Interrupt generation is masked.
1 = Interrupt generation is un-masked.
The driver should not un-mask the interrupt unless ensured by the
AC‘97 controller that no conflict is possible with modem slot 12 GPI functionality. Some AC’97 2.2 compliant controllers will not
likely support audio CODEC interrupt infrastructure. In either case,
software should poll the interrupt status after initiating a sense
cycle and wait for Sense Cycle Max Delay to determine if an
interrupting event has occurred.
57
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
STAC9766/9767
V 7.4 12/06
STAC9766/9767
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
Bit(s) Reset Value
10:4
0
3:0
0
PC AUDIO
Access
Read Only
Name
Description
RESERVED Bits not used, should read back 0
Page Selector
0h = Vendor Specific
1h = Page ID 01 (See Section 8.4 for additional information on the
Paging Registers)
Fh = Reserved Pages
This register is used to select a descriptor of 16 word pages
between registers 60h to 6Fh. Value 0h is used to select vendor
Read / Write PG3:PG0 specific space to maintain compatibility with AC’97 2.2 vendor
specific registers.
System software determines implemented pages by writing the
page number and reading the value back. All implemented pages
must be consecutive. (i.e., page 2h cannot be implemented without
page 1h).
These registers are not reset on RESET#.
8.1.18.
Powerdown Ctrl/Stat (26h)
Default: 000Fh
D15
D14
D13
D12
D11
D10
D9
D8
EAPD
D7
PR6
D6
PR5
D5
PR4
D4
PR3
D3
PR2
D2
PR1
D1
PR0
D0
REF
ANL
DAC
ADC
RESERVED
IDT™
Bit(s)
Reset Value
Name
15
0
EAPD
14
0
PR6
13
0
PR5
12
0
PR4
11
0
PR3
10
0
PR2
9
0
PR1
8
0
PR0
7:4
0
RESERVED
3
1
REF
2
1
ANL
Description
1 = Forces EAPD pad to VDDD
0 = Forces EAPD pad to GNDD
0 = Headphone Amp powered up
1 = Headphone Amp powered down
0 = Digital Clk active
1 = Digital Clk disable
0 = Digital active
1 = Powerdown: PLL, AC-Link, crystal oscillator
0 = VREF and VREFOUT are active
1 = VREF and VREFOUT are powered down, and PR2 is asserted in
analog block
0 = Analog active
1 = All signal path analog is powered down
0 = DAC powered up
1 = DAC powered down
0 = ADC powered up
1 = ADC powered down
Bit not used, should read back 0
Read Only --- VREF status
1 = VREF enabled
Read Only ---- ANALOG MIXERS, etc. Status
1 = Analog mixers ready.
58
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
STAC9766/9767
V 7.4 12/06
STAC9766/9767
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
Bit(s)
Reset Value
Name
1
1
DAC
0
1
ADC
8.1.18.1.
PC AUDIO
Description
Read Only ---- DAC Status
1 = DAC ready to playback
Read Only ---- ADC Status
1 = ADC ready to record
Ready Status
The lower half of this register is read only status, a 1 indicating that each subsection is “ready”.
Ready is defined as the subsection's ability to perform in its nominal state. When this register is written, the bit values that come in on AC-Link will have no effect on read only bits 0-7.
When the AC-Link “CODEC Ready” indicator bit (SDATA_IN slot 0, bit 15) is a 1, it indicates that the
AC-Link and AC'97 control and status registers are in a fully operational state. The AC'97 controller
must further probe this Powerdown Control/Status Register to determine exactly which subsections,
if any, are ready. When this register is written, the bit values that come in on AC-Link will have no
effect on read only bits 0-7.
8.1.18.2.
Powerdown Controls
The STAC9766/9767 is capable of operating at reduced power when no activity is required. The
power-down state is controlled by the Powerdown Register (26h). See the section “Low Power
Modes” for more information.
8.1.18.3.
External Amplifier Power Down Control Output
The EAPD bit 15 of the Powerdown Control/Status Register (Index 26h) directly controls the output
of the EAPD output, pin 45, and produces a logical 1 when this bit is set to logic high. This function is
used to control an external audio amplifier power down. EAPD = 0 places approximately 0 V on the
output pin, enabling an external audio amplifier. EAPD = 1 places approximately DVdd on the output
pin, disabling the external audio amplifier. Audio amplifiers that operate with reverse polarity will
likely require an external inverter to maintain software driver compatibility.
EAPD can also act as a GPIO. See Section 8.4.11: page78. The GPIO controls in Section 8.2:
page65 have no effect on EAPD.
8.1.19.
Extended Audio ID (28h)
Default: 0A05h
D15
D14
ID1
ID0
D7
D6
RESERVED
D13
D12
D11
D10
RESERVED
D5
DSA1
D4
DSA0
D3
RESVD
D2
SPDIF
D9
D8
AMAP
RSVD
D1
RSVD
D0
VRA
The Extended Audio ID register is a read only register except for bits D4 and D5. ID1 and ID0 echo
the configuration of the CODEC as defined by the programming of pins 45 and 46 externally. The
primary CODEC returns 00, while any other code (01, 10, 11) identifies the CODEC as one of three
secondary CODEC possibilities. The AMAP bit, D9, will return a 1 indicating that the CODEC sup-
IDT™
59
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
STAC9766/9767
V 7.4 12/06
STAC9766/9767
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
PC AUDIO
ports the optional “AC’97 2.3 compliant AC-link slot to audio DAC mappings”.The default condition
assumes that 0, 0 are loaded in the DSA0 and DSA1 bits of the Extended Audio ID (Index 28h). With
0s in the DSA1 and DSA0 bits, the CODEC slot assignments are as per the AC’97 specification recommendations. If the DSA1 and DSA0 bits do not contain 0s, the slot assignments are as per the
table in the section describing the Extended Audio ID (Index 28h). The VRA bit, D0, will return a 1
indicating that the CODEC supports the optional variable sample rate conversion as defined by the
AC’97 specification.
Table 20. Extended Audio ID Register Functions
Bit
Name
Access
Reset Value
Function
00 = XTAL_OUT grounded (Note 1)
CID1#,CID0# = XTAL_OUT crystal or floating
15:14
ID [1,0]
Read only
Variable
13:12
RESERVED
Read only
00
Bits not used, should read back 00
11:10
9:6
REV[1:0]
RSVD
Read only
Read only
10
0
Indicates CODEC is AC’97 Rev 2.3 compliant
Reserved
DAC slot assignment
5:4
8.1.20.
DSA [1,0]
Read/Write
00
Read only
0
If CID[1:0] = 00 then DSA[1:0] resets to 00
If CID[1:0] = 01 then DSA[1:0] resets to 01
If CID[1:0] = 10 then DSA[1:0] resets to 01
If CID[1:0] = 11 then DSA[1:0] resets to 10
00 = left slot 3, right slot 4
01 = left slot 7, right slot 8
10 = left slot 6, right slot 9
11 = left slot 10, right slot 11
Reserved
3
RSVD
2
SPDIF
1
RSVD
Read only
0
0 = SPDIF pulled high on reset, SPDIF disabled
1 = default, SPDIF enabled (Note 2)
Reserved
0
VRA
Read only
1
Variable sample rates supported (Always = 1)
Read only
1
1.
External CID pin status (from analog) these bits are the logical inversion of the pin polarity (pin
45-46). These bits are zero if XTAL_OUT is grounded with an alternate external clock source in
primary mode only. Secondary mode can either be through BIT CLK driven or 24MHz clock
driver, with XTAL_OUT floating.
2.
If pin 48 is held high at powerup, this bit will be held to zero, to indicate the SPDIF is not available. Pin 48: To Enable SPDIF, use a 1KΩ - 1 0 KΩ external pulldown. To Disable SPDIF, use a
1 KΩ - 1 0 KΩ external pullup. Do NOT leave Pin 48 floating.
Extended Audio Control/Status (2Ah)
Default: 0400h* (*default depends on CODEC ID)
D15
D14
VCFG
D7
D6
RESERVED
IDT™
D13
D12
RESERVED
D5
D4
SPSA1
SPSA0
D11
D10
D3
SPCV
D2
RSRVD
SPDIF
60
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
STAC9766/9767
D9
D8
RESERVED
D1
D0
RSRVD
VRA enable
V 7.4 12/06
STAC9766/9767
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
PC AUDIO
Note: If pin 48 is held high at powerup, the SPDIF is not available and bits D15:D1 can not be
written and will read back zero. Pin 48: To Enable SPDIF, use a 1KΩ - 1 0 KΩ external pulldown.
To Disable SPDIF, use a 1KΩ - 1 0 KΩ external pullup. Do NOT leave Pin 48 floating.
Bit(s) Reset Value
Name
15
VCFG
14-11
RESERVED
10
0
SPCV
9:6
0
RESERVED
5:4
0
3
If CID[1:0] = 00 then SPSA[1:0] resets to 01
If CID[1:0] = 01 then SPSA[1:0] resets to 10
If CID[1:0] = 10 then SPSA[1:0] resets to 10
SPSA1:SPSA0 If CID[1:0] = 11 then SPSA[1:0] resets to 11
RESERVED
2
0
SPDIF
1
0
RESERVED
0
0
VRA Enable
8.1.20.1.
Description
Determines the SPDIF transmitter behavior when data is not being
transmitted. When asserted, this bit forces the deassertion of the SPDIF
“Validity” flag, which is bit 28 transmitted by the SPDIF sub-frame. The “V” bit
is defined in the SPDIF Control Register (Reg 3Ah).
If “V” = 1 and “VCFG” = 0, then for each S/PDIF sub-frame (Left & Right),
bit<28> “Validity” flag reflects whether or not an internal CODEC
transmission error has occurred. Specifically an internal CODEC error
should result in the “Validity” flag being set to 1.
If “V” = 0 and “VCFG” = 1, In the case where the S/PDIF transmitter does
not receive a valid sample from the AC'97 controller, (Left or Right), the S/
PDIF transmitter should set the “Validity” flag to 0 and pad the “Audio
Sample Word” with 0 for sub-frame in question. If a valid sample (Left or
Right) was received and successfully transmitted, the “Validity” flag
should be 0 for that sub-frame.
Default state, coming out of reset, for “V” and “VCFG” should be 0 and 0.
These bits are set via driver .inf options.
Reserved
0 = Invalid SPDIF configuration
1 = Valid SPDIF configuration
Bit not used, should read back 0
SPDIF slot assignment
00 = Left slot 3, right slot 4
01 = Left slot 7, right slot 8
10 = Left slot 6, right slot 9
11 = Left slot 10, right slot 11
Reserved
0 = Disables SPDIF (SPDIF_OUT is high Z) (note 1)
1 = Enable SPDIF
SPDIF is a control register for Reg 3Ah, this bit must be set low i.e. SPDIF
disabled in order to write to Reg 3Ah Bits D15,D13:D0.
Bit not used, should read back 0
0 = VRA disabled, DAC and ADC set to 48 KHz (Registers 2Ch and 32h
loaded with the value BB80h)
1 = VRA ENABLED, Reg. 2Ch & 32h control sample rate
Variable Rate Sampling Enable
The Extended Audio Status Control register also contains one active bit to enable or disable the
Variable Sampling Rate capabilities of the DACs and ADCs. If the VRA, bit D0, is 1, the variable
IDT™
61
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
STAC9766/9767
V 7.4 12/06
STAC9766/9767
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
PC AUDIO
sample rate control registers (2Ch and 32h) are active, and “on-demand” slot data required transfers
are allowed. If the VRA bit is 0, the DACs and ADCs will operate at the default 48 KHz data rate.
The STAC9766/9767 supports “on-demand” slot request flags. These flags are passed from the
CODEC to the AC’97 controller in every audio input frame. Each time a slot request flag is set (active
low) in a given audio frame, the controller will pass the next PCM sample for the corresponding slot
in the audio frame that immediately follows. The VRA enable bit must be set to 1 to enable
“on-demand” data transfers. If the VRA enable bit is not set, the CODEC will default to 48 KHz transfers and every audio frame will include an active slot request flag and data is transferred every
frame.
For variable sample rate output, the CODEC examines its sample rate control registers, the state of
the FIFOs, and the incoming SDATA_OUT tag bits at the beginning of each audio output frame to
determine which SLOTREQ bits to set active (low). SLOTREQ bits are asserted during the current
audio input frame for active output slots, which will require data in the next audio output frame.
For variable sample rate input, the tag bit for each input slot indicates whether valid data is present
or not. Thus, even in variable sample rate mode, the CODEC is always the master: for SDATA_IN
(CODEC to controller), the CODEC sets the TAG bit; for SDATA_OUT (controller to CODEC), the
CODEC sets the SLOTREQ bit and then checks for the TAG bit in the next frame. When VRA is set
to 0, the PCM rate registers (2Ch and 32h) are overwritten with BB80h (48 KHz).
8.1.20.2.
SPDIF
The SPDIF bit in the Extended Audio Status Control Register is used to enable and disable the
SPDIF functionality within the STAC9766/9767. If the SPDIF is set to a 1, then the function is
enabled. When set to a 0, it is disabled.
8.1.20.3.
SPCV (SPDIF Configuration Valid)
The SPCV bit is read only and indicates whether or not the SPDIF system is set up correctly. When
SPCV is a 0, it indicates the system configuration is invalid. When SPCV is a 1, it indicates the system configuration is valid.
8.1.20.4.
SPSA1, SPSA0 (SPDIF Slot Assignment)
SPSA1 and SPSA0 combine to provide the slot assignments for the SPDIF data. The following
details the slot assignment relationship between SPSA1 and SPSA0.
The STAC9766/9767 are AMAP compliant with the following table.
Table 21. AMAP Compliant
CODEC
ID
Function
SPSA = 00
SPSA = 01
SPSA = 10
SPSA = 11
slot assignment slot assignment slot assignment slot assignment
00
01
2-ch Primary w/SPDIF
2-ch Dock CODEC w/SPDIF
3&4
3&4
7 & 8*
7&8
6&9
6 & 9*
10 & 11
10 & 11
10
+2-ch Surr w/ SPDIF
3&4
7&8
6 & 9*
10 & 11
11
+2-ch Cntr/LFE w/ SPDIF
3&4
7&8
6&9
10 & 11*
Note: * is the default slot assignment
IDT™
62
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
STAC9766/9767
V 7.4 12/06
STAC9766/9767
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
8.1.21.
PC AUDIO
PCM DAC Rate Registers (2Ch and 32h)
The internal sample rate for the DACs and ADCs is controlled by the value in these read/write registers that contain a 16-bit unsigned value between 0 and 65535 representing the conversion rate in
Hertz (Hz). In VRA mode (register 2Ah bit D0 = 1), if the value written to these registers is supported,
that value will be echoed back when read, otherwise the closest (higher in the case of a tie) sample
rate is supported and returned. Per PC 99 / PC 2001 specification, independent sample rates are
supported for record and playback.
Whenever VRA is set to 0, the PCM rate registers (2Ch and 32h) will be loaded with BB80h
(48 KHz).
If VRA is set to a 0, any write to this address will be ignored and the rate remains at 48 KHz.
Table 22. Hardware Supported Sample Rates
Sample Rate
8.1.22.
SR15-SR0 Value
8 KHz
1F40h
11.025 KHz
16 KHz
2B11h
3E80h
22.05 KHz
5622h
32 KHz
44.1 KHz
7D00h
AC44h
48 KHz
BB80h
PCM DAC Rate (2Ch)
Default: BB80h (see table22: page63)
8.1.23.
D15
D14
D13
D12
D11
D10
D9
D8
SR15
SR14
SR13
SR12
SR11
SR10
SR9
SR8
D7
SR7
D6
SR6
D5
SR5
D4
SR4
D3
SR3
D2
SR2
D1
SR1
D0
SR0
D11
SR11
D10
SR10
D9
SR9
D8
SR8
PCM LR ADC Rate (32h)
Default: BB80h (see table22: page63)
D15
SR15
IDT™
D14
SR14
D13
SR13
D12
SR12
D7
D6
D5
D4
D3
D2
D1
D0
SR7
SR6
SR5
SR4
SR3
SR2
SR1
SR0
63
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
STAC9766/9767
V 7.4 12/06
STAC9766/9767
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
8.1.24.
PC AUDIO
SPDIF Control (3Ah)
Default: 2000h
D15
D14
D13
D12
D11
D10
D9
D8
V
D7
DRS
D6
SPSR1
D5
SPSR2
D4
L
D3
CC6
D2
CC5
D1
CC4
D0
CC3
CC2
CC1
CC0
PRE
COPY
/AUDIO
PRO
Bit(s)
Reset Value
15 in 2.3
IDT™
Access
Name
Description (note 1-2)
Validity: This bit affects the “Validity” flag, bit<28> transmitted in
each S/PDIF subframe, and enables the S/PDIF transmitter to
maintain connection during error or mute conditions. Subframe
bit<28> = 0 indicates that data is valid for conversion at the
receiver, 1 indicates invalid data (not suitable for conversion at
the receiver).
V
14
0
13:12
10
11
0
10:4
0
3
0
2
0
1
0
0
0
If “V” = 1, then each S/PDIF subframe (Left & Right) should have
bit<28> “Validity” flag = 1 or set based on the assertion or
de-assertion of the AC '97 “VFORCE” bit within the Extended
Audio Status and Control Register (D15, register 2Ah).
Read Only
DRS
1 = Double Rate SPDIF support (always = 0)
SPDIF Sample Rate.
00 - 44.1 KHz Rate
Read & Write SPSR[1,0] 01 - Reserved
10 - 48 KHz Rate (default)
11 - 32 KHz Rate
Generation Level is defined by the IEC standard, or as
Read & Write
L
appropriate.
Category Code is defined by the IEC standard or as appropriate
Read & Write CC[6, 0]
by media.
0 = 0 µsec Pre-emphasis
Read & Write
PRE
1 = Pre-emphasis is 50/15 µsec
0 = Copyright not asserted
Read & Write
COPY
1 = Copyright is asserted
0 = PCM data
Read & Write /AUDIO
1 = Non-Audio or non-PCM format
0 = Consumer use of the channel
Read & Write
PRO
1 = Professional use of the channel
64
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
STAC9766/9767
V 7.4 12/06
STAC9766/9767
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
8.2.
PC AUDIO
General Purpose Input & Outputs
8.2.1.
EAPD
EAPD can act as a GPIO, but is unaffected by the following registers. To use EAPD as a GPIO, use
Register 74h, the EAPD Access Register (see Section8.4.11: page78). Additional information
about EAPD can also be found in Section 8.1.18.3: page 59.
8.2.2.
GPIO Pin Definitions
GPIO pins are programmable to have input/output functionality. The data values (status) for these
pins are all in one register with input/output configuration in a separate register. Control of GPIO pins
configured for output is achieved by setting the corresponding bit in output slot 12; status of GPIO
pins configured for input is returned on input slot 12. The CODEC must constantly set the GPIO pins
that are configured for output, based upon the value of the corresponding bit position of the control
slot 12. The CODEC should ignore output slot 12 bits that correspond to GPIO control pins configured as inputs. The CODEC must constantly update status on input slot 12, based upon the logic
level detected at each GPIO pin configured for input. A GPIO output pin value that is written via slot
12 in the current frame will not affect the GPIO status that is returned in that particular write frame.
This slot-12 based control/status protocol minimizes the latency and complexity, especially for
host-based Controllers and host data pump software, and provides high speed monitoring and control, above what could be achieved with command/status slots. For host-based implementations,
most AC‘97 registers can be shadowed by the driver in order to provide immediate response when
read by the processor, and GPIO pins configured as inputs should be capable of triggering an interrupt upon a change of status.
The AC-link request for GPIO pin status is always delayed by at least one frame time. Read-Modify-Writes across the AC-link incur latency issues which must be accounted for by the software driver
or AC‘97 Digital Controller firmware. PCI retries should be kept to a minimum wherever possible.
8.2.3.
GPIO Pin Implementation
The GPIOs are set to a high impedance state on power-on or a cold reset. It is up to the AC‘97 Digital Controller to first enable the output after setting it to the desired state.
IDT™
65
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
STAC9766/9767
V 7.4 12/06
STAC9766/9767
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
8.2.4.
PC AUDIO
Extended Modem Status and Control Register (3Eh)
Default: 0100h
D15
D14
D13
D12
RESERVED
D11
D10
D9
D8
PRA
D7
D6
D5
D4
D3
D2
D1
D0
RESERVED
Bit(s)
15:9
Access
Read Only
Reset Value
0
Name
RESERVED
8
Read / Write
1
PRA
7:1
Read Only
0
RESERVED
0
Read Only
0
GPIO
8.2.5.
GPIO
Description
Bit not used, should read back 0
0 = GPIO powered up / enabled
1 = GPIO powered down / disabled
Bit not used, should read back 0
0 = GPIO not ready (powered down)
1 = GPIO ready (powered up)
GPIO Pin Configuration Register (4Ch)
Default: 0003h
D15
D14
D13
D12
D11
D10
D9
D8
D2
D1
GC1
(GPIO1)
D0
GC0
(GPIO0)
RESERVED
D7
D6
D5
D4
D3
RESERVED
Bit(s)
15:2
Access
Read Only
Reset Value
0
Name
RESERVED
1
Read / Write
1
GC1
0
Read / Write
1
GC0
8.2.6.
Description
Bit not used, should read back 0
0 = GPIO1 configured as output
1 = GPIO1 configured as input
0 = GPIO0 configured as output
1 = GPIO0 configured as input
GPIO Pin Polarity/Type Register (4Eh)
Default: FFFFh
D15
D14
D13
D12
D11
RESERVED
D7
D6
D5
D4
D3
D10
D2
RESERVED
Bit(s)
15:2
1
0
IDT™
D9
D8
D1
D0
GP1
(GPIO1)
GP0
(GPIO0)
Access
Read Only
Reset Value
Name
Description
0
RESERVED Bit not used, should read back 0
0 = GPIO1 Input Polarity Inverted, CMOS output drive.
Read / Write
1
GP1
1 = GPIO1 Input Polarity Non-inverted, Open-Drain output drive.
0 = GPIO0 Input Polarity Inverted, CMOS output drive.
Read / Write
1
GP0
1 = GPIO0 Input Polarity Non-inverted, Open-Drain output drive.
66
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
STAC9766/9767
V 7.4 12/06
STAC9766/9767
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
8.2.7.
PC AUDIO
GPIO Pin Sticky Register (50h)
Default: 0000h
D15
D14
D7
D6
D13
D12
D11
D10
D5
RESERVED
D4
D3
D2
RESERVED
D8
D1
D0
GS1 (GPIO1) GS0 (GPIO0)
Bit(s)
15:2
Access
Read Only
Reset Value
0
Name
RESERVED
1
Read / Write
0
GS1
0
Read / Write
0
GS0
8.2.8.
D9
Description
Bit not used, should read back 0
0 = GPIO1 Non Sticky configuration.
1 = GPIO1 Sticky configuration.
0 = GPIO0 Non Sticky configuration.
1 = GPIO0 Sticky configuration.
GPIO Pin Mask Register (52h)
Default: 0000h
D15
D14
D13
D12
D11
D10
D9
D8
RESERVED
D7
D6
D5
D4
RESERVED
D3
Bit(s)
15:2
Access
Read Only
Reset Value
0
Name
RESERVED
1
Read / Write
0
GW1
0
Read / Write
0
GW0
8.2.9.
D2
D1
D0
GW1 (GPIO1) GW0 (GPIO0)
Description
Bit not used, should read back 0
0 = GPIO1 interrupt not passed to GPIO_INT slot 12.
1 = GPIO1 interrupt is passed to GPIO_INT slot 12.
0 = GPIO0 interrupt not passed to GPIO_INT slot 12.
1 = GPIO0 interrupt is passed to GPIO_INT slot 12.
GPIO Pin Status Register (54h)
Default: 0000h
D15
D14
D13
D12
D11
RESERVED
D10
D7
D6
D5
D4
D3
D2
RESERVED
IDT™
Bit(s)
Access
15:2
Read Only
D9
D8
D1
D0
GI1 (GPIO1)
GI0 (GPIO0)
Reset
Name
Description
Value
0
RESERVED Bit not used, should read back 0
67
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
STAC9766/9767
V 7.4 12/06
STAC9766/9767
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
Bit(s)
8.3.
Access
Reset
Value
Name
1
Read / Write
x
GI1
0
Read / Write
x
GI0
PC AUDIO
Description
When GPIO1 is configured as output and Register h74 bit[0] = 0 (default),
the value of this register will be placed on the GPIO1 pad.
When GPIO1 is configured as output and Register h74 bit[0] = 1, the
GPIO1 pad will get its value from slot12.
When GPIO1 is configured as input and configured as a sticky, writing a
1 does nothing, writing a 0 clears this bit.
When GPIO1 is configured as input, this register reflects the value on the
GPIO1 pad after interpretation of the polarity and sticky configurations.
When GPIO0 is configured as output and Register h74 bit[0] = 0 (default),
the value of this register will be placed on the GPIO0 pad.
When GPIO0 is configured as output and Register h74 bit[0] = 1, the
GPIO0 pad will get its value from slot12.
When GPIO0 is configured as input and configured as a sticky, writing a
1 does nothing, writing a 0 clears this bit.
When GPIO0 is configured as input, this register reflects the value on the
GPIO0 pad after interpretation of the polarity and sticky configurations.
Extended CODEC Registers Page Structure Definition
Registers 60h-68h are the Extended CODEC Registers: These registers allow for the definition of further capabilities. These bits provide a paged address space for extended
CODEC information. The Page Selector bits in the Audio Interrupt and Paging register
(Register 24h bits 3:0) control the page of information viewed through this page window.
8.3.1.
Extended Registers Page 00
Page 00 of the Extended CODEC Registers is reserved for vendor specific use. Driver writers should not access these registers unless the Vendor ID register has been checked first
to ensure that the vendor of the AC '97 component has been identified and the usage of the
vendor defined registers understood.
8.3.2.
Extended Registers Page 01
The usage of Page 01 of the Extended CODEC Registers is defined in Register 24h found
in Section 8.1.17: page 57.
8.3.3.
Extended Registers Page 02, 03
Pages 02 and 03 of the Extended CODEC Registers are reserved for future use.
IDT™
68
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
STAC9766/9767
V 7.4 12/06
STAC9766/9767
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
8.4.
PC AUDIO
STAC9766/9767 Paging Registers
The AC’97 Specification Rev 2.3 uses a paging mechanism in order to increase the number of registers. The registers currently used in the paging are 60h to 6Eh. Additional information about the
Extended CODEC Registers, please refer to Section 8.3: page68.
One of two pages can be made active at any time, set in Register 24h. Register 24h is the Audio
Interrupt and Paging Register. Additional details about Register 24h is located in Section 8.1.17:
page57.
If page 00h is active, registers 60h to 6Eh are Vendor Specific.
If page 01h is active, registers 60h to 6Eh have the following functionality:
Reg
FUNCTION
Provides the CODEC Class and a Vendor specified revision
60h CODEC Class/Revision
identifier.
Allows for population by the system BIOS to identify the PCI Sub
62h PCI SVID
System Vendor ID.
Allows for population by the system BIOS to identify the PCI Sub
64h PCI SSID
System ID.
Provides the type of audio function being selected and which jack
66h Function Select
conductor the selected value is measured from.
Includes information about Gain, Inversion, Buffer delays,
68h Function Information
Information Validity, and Function Information presence.
Includes information about the connector/jack location, Input verses
6Ah Sense Register
Output sensing, the Order of the sense results, and the IDT specific
sense results.
6Ch
Reserved
6Eh
Reserved
8.4.1.
NAME
Location
8.4.1: page69
8.4.2: page70
Note:: page70
Note:: page71
8.4.5: page72
8.4.7: page74
CODEC Class/Rev (60h Page 01h )
Register 24h must be set to Page 01h to access this register.
Default: 12xxh
D15
D14
D13
RESERVED
D7
RV7
Bit(s)
15-13
IDT™
D6
RV6
Reset Value
D5
RV5
Name
RESERVED
D12
D11
D10
D9
D8
CL4
CL3
CL2
CL1
CL0
D4
RV4
D3
RV3
D2
RV2
D1
RV1
D0
RV0
Description
Reserved - not defined
69
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
STAC9766/9767
V 7.4 12/06
STAC9766/9767
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
Bit(s)
Reset Value
Name
12-8
CL4:CL0
7-0
RV7:RV0
8.4.2.
PC AUDIO
Description
CODEC Compatibility Class (RO)
This is a CODEC vendor specific field to define software compatibility for
the CODEC. Software read this field together with CODEC vendor ID
(reg 7C-7Eh) to determine vendor specific programming interface
compatibility. Software can rely on vendor specific register behavior to be
compatible among vendor CODECs of the same class.
00h - Field not implemented
01h-1Fh - Vendor specific compatibility class code
Equals Vendor ID2(Reg 7Eh) bits D7 to D0
Revision ID: (RO)
This register specifies a device specific revision identifier. The value is
chosen by the vendor. Zero is an acceptable value. This field should be
viewed as a vendor defined extension to the CODEC ID. This number
changes with new CODEC stepping of the same CODEC ID.
Equals Major Rev bits (Reg 6Ch) bits D7 to D0.
PCI SVID (62h Page 01h)
Register 24h must be set to Page 01h to access this register.
Default: FFFFh
D15
PVI15
D14
PVI14
D13
PVI13
D12
PVI12
D11
PVI11
D10
PVI10
D9
PVI9
D8
PVI8
D7
D6
D5
D4
D3
D2
D1
D0
PVI7
PVI6
PVI5
PVI4
PVI3
PVI2
PVI1
PVI0
Bit(s) Reset Value
15-0
Name
Description
PCI Sub System Vendor ID:
This field provides the PCI Sub System Vendor ID of the Audio or Modem Sub
PVI15:PVI0 Assembly Vendor (i.e., CNR manufacturer, Motherboard Vendor). This is NOT the
CODEC vendor PCI Vendor ID, nor the AC '97 controller PCI Vendor ID.
If data is not available, returns FFFFh.
Note: This register is populated by the BIOS and does not reset on RESET#.
8.4.3.
PCI SSID (64h Page 01h)
Register 24h must be set to Page 01h to access this register.
Default: FFFFh
IDT™
D15
D14
D13
D12
D11
D10
D9
D8
PI15
D7
PI14
D6
PI13
D5
PI12
D4
PI11
D3
PI10
D2
PI9
D1
PI8
D0
PI7
PI6
PI5
PI4
PI3
PI2
PI1
PI0
70
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
STAC9766/9767
V 7.4 12/06
STAC9766/9767
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
Bit(s) Reset Value
15-0
PC AUDIO
Name
Description
PCI Sub System ID:
This field provides the PCI Sub System ID of the Audio or Modem Sub Assembly
(i.e., CNR Model, Motherboard SKU). This is NOT the CODEC vendor PCI ID, nor
PI15:PVI0
the AC '97 controller PCI ID. Information in this field must be available for AC '97
controller reads when CODEC ready is asserted in AC link.If data is not available,
returns FFFFh.
Note: This register is populated by the BIOS and does not reset on RESET#.
8.4.4.
Function Select (66h Page 01h )
Register 24h must be set to Page 01h to access this register.
Default: 0000h
D15
D14
D13
D12
D7
D6
RESERVED
D5
D4
FC3
D11
D10
D9
D8
D2
FC1
D1
FC0
D0
T/R
RESERVED
D3
FC2
Bit(s) Reset Value
Name
Description
15-5
Reserved Reserved
Function Code bits:
00h - Line Out (Master Out)
01h - Head Phone Out (AUX Out)
Setting the T/R bit to 0 = Left,1 = Right
02h - DAC 3 (C/LFE) - Not Supported
03h - SPDIF out
04h - Phone In
05h - Mic1 (Mic select = 0)
06h - Mic2 (Mic select = 1)
07h - Line In
08h - CD In
09h - Video In
4-1
00h
FC3:FC0 0Ah - Aux In
0Bh - Mono Out
0C-0Fh - Reserved
For supported Jack and Mic Sense Functions, see Table23: page72.
The Function Code Bits are used to read Register 68h (Page 01h) and Register
6Ah (Page 01h).
Mono I/O should report relevant sense and function information on Tip, and report
not supported on Ring.
0
IDT™
0
T/R
Setting the function code to unsupported values will return a 0 when accessing the
Information Valid Bit in page 01 register 68h bit 5.
Tip or Ring selection Bit.This bit sets which jack conductor the sense value is
measured from. Software will program the corresponding the Ring/Tip selector bit
together with the I/O number in bits FC[3:0].
0 - Tip (Left)
1 - Ring (Right)
71
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
STAC9766/9767
V 7.4 12/06
STAC9766/9767
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
PC AUDIO
Note: This register does not reset on RESET#.
Function Code
I/O
Sense Capability
00h
01h
Line_Out
Headphone_Out
Jack Sense
Jack Sense
05h
Mic1
Mic Sense
06h
Mic2
Mic Sense
Table 23. Supported Jack and Mic Sense Functions
8.4.5.
Function Information (68h Page 01h)
Register 24h must be set to Page 01h to access this register.
Default: 00xxh, see table 24: page73.
D15
D14
D13
D12
D11
D10
D9
D8
G4
D7
G3
D6
G2
D5
G1
D4
G0
D3
INV
D2
DL4
D1
DL3
D0
DL2
DL1
DL0
IV
Bit(s) Reset Value
15
0
G4
14-11
0
G3:G0
10
IDT™
Name
INV
RESERVED
FIP
Description
Gain Sign Bit: The CODEC updates this bit with the sign of the gain value
present in G[3:0]. The BIOS updates this to take into consideration external
amplifiers or other external logic when relevant.
G[4] indicates whether the value is a gain or attenuation.
Gain in the G4 bit is in terms of dB.
This bit is Read/Write and only reset on POR and not by RESET#.
Gain Bits: The CODEC updates these bits with the gain value (dB relative to
level-out) in 1.5dBV increments. The BIOS updates these to take into
consideration external amplifiers or other external logic when relevant.
G[0:3] indicates the magnitude of the gain. G[4] indicates whether the value is a
gain or attenuation.
For Gain/Attenuation settings, see Table 25: page74.
These bits are read/write and are not reset on RESET#.
Inversion bit: Indicates that the CODEC presents a 180 degree phase shift to the
signal.
0h - No inversion reported
1h - Inverted
This bit is read/write and is not reset on RESET#.
BIOS should invert for each inverting gain stage.
72
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
STAC9766/9767
V 7.4 12/06
STAC9766/9767
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
Bit(s) Reset Value
9-5
4
1
3-1
0
0
NA
PC AUDIO
Name
Description
Buffer delays: CODEC will provide a delay measurement for the input and output
channels. Software will use this value to accurately calculate audio stream
position with respect to what is been reproduced or recorded. These values are
in 20.83 microsecond (1/48000 second) units.
For output channels, this timing is from the end of AC Link frame in which the
sample is provided, until the time the analog signal appears at the output pin. For
input streams, this is from when the analog signal is presented at the pin until the
representative sample is provided on the AC Link.
Analog in and out paths are not considered as part of this delay.
DL4:DL0
The measurement is a 'typical' measurement, at a 48 KHz sample rate, with
minimal in-CODEC processing (i.e., 3D effects are turned off.)
00h - Information not provided
01h…1Eh - Buffer delay in 20.83 µs units
1Fh - reserved
These bits are read/write and are not reset on RESET#.
The default value is the delay internal to the CODEC. The BIOS may add to this
value the known delays external to the CODEC, such as for an external
amplifier.
Information Valid Bit: Indicates whether a sensing method is provided by the
CODEC and if information field is valid. This field is updated by the CODEC.
0h--After CODEC RESET# de-assertion, it indicates the CODEC does NOT
provides sensing logic and this bit will be Read Only. After a sense cycle is
completed indicates that no information is provided on the sensing method.
IV
1h--After CODEC RESET# de-assertion, it indicates the CODEC provides
sensing logic for this I/O and this bit is Read/Write. After clearing this bit by
writing 1, when a sense cycle is completed the assertion of this bit indicates
that there is valid information in the remaining descriptor bits. Writing “0” to
this bit has no effect.
BIOS should NOT write this bit, as it is reset on RESET#.
RESERVED Bit not used, should read back 0
Function Information Present
This bit is set to a 1 indicates that the G[4:0], INV, DL[4:0](Register 68h, Page
FIP
01h) and ST[2:0](register 6Ah, Page 01h) are supported and R/W capable.
This bit is Read Only.
Table 24. Reg 68h Default Values
Reg 66h Function Code
Reg 68h Default Value
00h Line Out
01h Headphone Out
0010h
0010h
05h Mic1
0010h
06h Mic2
All other Function Codes
0010h
0000h
For RESET#: Reg 68h default value is 0000h.
IDT™
73
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
STAC9766/9767
V 7.4 12/06
STAC9766/9767
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
PC AUDIO
Table 25. Gain or Attenuation Examples
G[4:0]
Gain or Attenuation (dB relative to level-out)
00000
00001
0 dBV
+1.5 dBV
01111
+24 dBV
10001
11111
-1.5 dBV
-24 dBV
Table 26. Register 68h/Page 01h Bit Overview
Bit
D5:D15
D4
Read/Write and should NOT be set by the BIOS
D3:1
D0
8.4.6.
Bit R/W Overview
Read/Write and only reset on POR (Power on Reset) and not by RESET#.
Reserved
Read Only.
Digital Audio Control (6Ah, Page 00h)
To access Register 6Ah, Page 00h must be selected in Register 24h.
Default: 0000h
D15
D14
D13
D7
D6
D5
D12
D11
D10
D9
D8
RESERVED
D4
D3
D2
D1
D0
SPOR
DO1
RSVD
RESERVED
Bit(s) Reset Value
Name
Description
15:3
0
RESERVED Bits not used, should read back 0
Over-ride Register 2Ah, D12 write-lock when SPDIF_EN = 1.
2
0
SPOR
All bits except SPDIF sample-rate are affected (D13-D12). Allows for sub-code
changing on-the-fly.
SPDIF Digital Output Source Selection:
1
0
DO1
DO1 = 0; PCM data from the AC-Link to SPDIF
DO1 = 1; ADC record data to SPDIF
0
0
RESERVED Bits not used, should read back 0
8.4.7.
Sense Details (6Ah Page 01h)
Register 24h must be set to Page 01h to access this register.
Default: NA
IDT™
D15
D14
D13
D12
D11
D10
ST2
ST1
ST0
D7
OR1
D6
OR0
D5
SR5
S4
S3
D4
SR4
D3
SR3
74
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
D9
D8
S2
S1
S0
D2
SR2
D1
SR1
D0
SR1
STAC9766/9767
V 7.4 12/06
STAC9766/9767
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
Bit(s) Reset Value
15-13
12-8
7-6
5-0
PC AUDIO
Name
Description
Connector/Jack location bits
This field describes the location of the jack in the system.
0h - Rear I/O Panel
1h - Front Panel
ST2:ST0 2h - Motherboard
3h - Dock/External
4h:6h - Reserved
7h - No Connection/unused I/O
These bits are Read/Write.
Sensed bits meaning relates to the I/O being sense as output or inputs.
Sensed bits (outputs): See Table 27: page75.
This field allows for the reporting of the type of output peripheral/device plugged
in the jack. Values specified below should be interrogated in conjunction with
the SR[5:0] and OR[1:0] bits for accurate reporting.
S4:S0
Sensed bits (inputs): See Table 28: page76.
This field allows for the reporting of the type of input peripheral/device plugged
in the jack. Values specified below should be interrogated in conjunction with
the SR[5:0] and OR[1:0] bits for accurate reporting.
This field is Read Only.
Order Bits. These bits indicate the order the sense result bits SR[5:0] are using.
00 - 100 (i.e., Ohms)
OR1:0 01 - 101 (i.e., 10 Ohms)
10 - 102 (i.e., 100 Ohms)
11 - 103 (i.e., 1K Ohms)
Sense Result bits
SR5:SR0
These bits are used to report a vendor specific fingerprint or value. (Resistance,
impedance, reactance, etc.) This field is Read Only.
Table 27. Sensed Bits (Outputs)
Reported Value
Data not valid. Indicates that the reported value(s) is invalid.
No connection. Indicates that there are no connected devices.
2h
Fingerprint. Indicates a specific fingerprint value for devices that are not specified or unknown.
3h
4h
Speakers (8 ohms)
Speakers (4 ohms)
5h
Powered Speakers
6h
7h
Stereo Headphone
RESERVED
8h
RESERVED
9h
Headset (mono speaker left channel and mic.)
Other. Allows a vendor to report sensing other type of devices/peripherals. SR[5:0] together with
OR[1:0] provide information regarding the type of device sensed.
Ah
Bh-Eh
Fh
IDT™
Output Peripheral/Device
0h
1h
Reserved
Unknown (use fingerprint)
75
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
STAC9766/9767
V 7.4 12/06
STAC9766/9767
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
PC AUDIO
Table 28. Sensed Bits (Inputs)
Reported Value
Input Peripheral/Device
0h
1h
Data not valid. Indicates that the reported value(s) is invalid.
No connection. Indicates that there are no connected devices.
2h
Fingerprint. Indicates a specific fingerprint value for devices that are not specified.
3h
4h
Microphone (mono)
Reserved
5h
Stereo Line In (CE device attached)
6h
7h
Reserved
Reserved
8h
Reserved
9h
Headset (mono speaker left channel and mic.)
Other. Allows a vendor to report sensing other type of devices/peripherals. SR[5:0] together with
OR[1:0] provide information regarding the type of device sensed.
Ah
Bh-Eh
Fh
8.4.8.
Reserved
Unknown (use fingerprint)
Revision Code (6Ch)
To access Register 6Ch, Page 00h must be selected in Register 24h.
Default: 00xxh
D15
D14
D7
D13
D12
D11
D10
D9
D8
D5
MINORREV
D4
D3
D2
D1
D0
D6
MAJORREV
Bit(s) Reset Value
15:8
00h
7:0
xx
8.4.9.
Name
Description
Minor Revision ID. These bits are read only and will be updated based on minor
MINORREV
device changes which will not require software changes.
Major Revision ID. These bits are read only and will be updated based on major
MAJORREV
device changes.
Analog Special (6Eh)
To access Register 6Eh, Page 00h must be selected in Register 24h.
Default: 1000h
D15
IDT™
D14
RESERVED
D13
D12
AC97MIX
D11
D10
D3
D2
D7
D6
D5
D4
RSVD
MUTEFIX
DISABLE
ADCSLT1
ADCSLT0
D9
RESERVED
D1
RSVD MIC GAIN VAL SPLYOVR EN
76
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
STAC9766/9767
D8
D0
SPLYOVR VAL
V 7.4 12/06
STAC9766/9767
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
Bit(s) Reset Value
15:13
0
12
1
11:7
0
6
0
5:4
0
3
0
2
0
1
0
0
0
8.4.10.
PC AUDIO
Name
RESERVED
Description
Bits not used, should read back 0
0 = mixer record contains a mix of all mono and stereo analog input signals,
not the DAC (ALL ANALOG mode)
1 = mixer record contains a mix of all mono and stereo analog input signals
plus the DAC signal (AC97 mode)
This bit only has an effect when either Stereo Mix or Mono Mix is selected as
the record source in Reg. 1Ah.
AC97MIX
The “ALL” mode is useful in conjunction with the POP BYPASS mode (Reg.
20h;D15) to record all analog sources, perform further processing in the
digital domain, including combining with other PCM data, and routing through
the DACs directly to Line Out, Headphone Out, or Mono Out.
A Stereo Mix recording will be affected by the setting of the 3D Effects bit
(Reg. 20h;D13)
RESERVED Bits not used, should read back 0
0 = MUTE FIX Enabled
1 = MUTE FIX Disabled
MUTEFIX
When this bit is zero, and either channel is set to -46.5dB attenuation, 1Fh,
DISABLE
then that channel is fully muted. When this bit is one, then operation is per
AC’97 specification.
Select slots for ADC data on ACLINK
00 = left slot 3, right slot 4
ADCSLT1:0 01 = left slot 7, right slot 8
10 = left slot 6, right slot 9
11 = left slot 10, right slot 11
RESERVED Reserved
Adds +10dB gain to the selected MIC input. Use in conjunction with
BOOSTEN (Reg. 0Eh;D6)
BOOSTEN MICGAINVAL
MIC GAIN VAL 0
0
= 0 dB
0
1
= 10 dB
1
0
= 20 dB
1
1
= 30 dB
Supply Override bit allows override of the supply detect.
SPLYOVR_EN
0 = no override on supply detect
1 = override supply detect with bit 0
Supply Override Value provides the analog voltage operation values.
SPLYOVR_VA
L
0 = force 3.3V operation
1 = force 5V operation
Analog Current Adjust (72h)
To unlock Register 72h, write 0xABBA to Register 70h.
Default: 0000h
D15
D14
D13
D12
D11
D10
D9
D8
D2
D1
D0
RESERVED
D7
INT APOP
IDT™
D6
D5
D4
D3
RESERVED
77
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
STAC9766/9767
V 7.4 12/06
STAC9766/9767
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
PC AUDIO
Bit(s) Reset Value
Name
Description
15:8
0
RESERVED Reserved
0 = Anti Pop Enabled
1 = Anti Pop Disabled
The STAC9766/9767 includes an internal power supply anti-pop circuit that
prevents audible clicks and pops from being heard when the CODEC is powered
on and off. This function is accomplished by delaying the charge/discharge of the
VREF capacitor (Pin 27). C VREF value of 1 µF will cause a turn-on delay of roughly
7
0
INT_APOP
3 seconds, which will allow the power supplies to stabilize before the CODEC
outputs are enabled. The delay will be extended to 30 seconds if a C VREF value of
10 µF is used. The CODEC outputs are also kept stable for the same amount of
time at power-off to allow the system to be gracefully turned off. The INT_APOP bit
allows this delay circuit to be bypassed for rapid production testing. Any external
component anti-pop circuit is unaffected by the internal circuit.
6:0
0
RESERVED Reserved
8.4.11.
EAPD Access Register (74h)
Default: 0800h
D15
EAPD
D14
D13
RESERVED
D12
D11
EAPD_OEN
D10
D9
RESERVED
D8
D7
D6
D5
D4
D3
D2
D1
D0
INTDIS
GPIOACC
GPIOSLT12
RESERVED
Bit(s) Reset Value
15
0
14:12
0
11
1
10:3
0
2
0
1
0
0
0
Name
Description
EAPD data Enable
EAPD
EAPD data output on EAPD when bit D11 = 1
EAPD data input from pin when bit D11 = 0
RESERVED Bit not used, should read back 0
EAPD Pin Enable
EAPD_OEN 0 = EAPD configured as input pin
1 = EAPD configured as output pin
RESERVED Bit not used, should read back 0
Interrupt disable option.
Interrupts cleared by writing a 1 to I4 (Reg24h:D15)
INTDIS
0 = will clear both SENSE and GPIO interrupts
1 = will only clear SENSE interrupts. GPIO interrupts will have to be cleared in
Reg54h.
GPIO ACCESS
GPIOACC 0 = ACLINK access from GPIO Pads
1 = ACLINK access from GPIO Register 54h
0 = GPIO0/1 access via Reg54h when GPIO is set as an output, for input Slot12
data will be 0h.
1 = GPIO0/1 access via Slot 12 when GPIO is set as an output, for inputs
GPIOSLT12 Reg54h will not be updated.
This can only be used if a modem CODEC is not present in the system and using
Slot12.
IDT™
78
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
STAC9766/9767
V 7.4 12/06
STAC9766/9767
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
8.4.12.
PC AUDIO
High Pass Filter Bypass (78h*)
To unlock portion of Register 78h, write 0xABBA to Register 76h.
Default: 0000h
D15
D14
D7
D13
D6
D5
D12
D11
D10
D9
RESERVED
D4
D3
D2
D1
RESERVED
Bit(s) Reset Value
15:1
0
0
8.4.13.
0
D8
D0
ADC HPF BYP
Name
RESERVED
Description
Bits not used, should read back 0
0 = Normal operation, (ADC High Pass Filter active)
ADC HPF BYP
1 = ADC High Pass Filter Bypass
Stereo Mic Enable Register (78h*)
To unlock portion of Register 78h, write 0x7272 to Register 72h.
Default: 0000h
D15
D14
D13
D12
D11
RESERVED
D10
D9
D8
D7
D6
D5
D4
D3
D2
D1
D0
RSVD
STEREO_
MIC
Bit(s) Reset Value
15:7
0
6
8.5.
0
RESERVED
Name
RESERVED
Description
Bits not used, should read back 0
0 = Stereo Mic Disabled (default)
STEREO_MIC
1 = Stereo Mic Enabled
Vendor ID1 and ID2 (Index 7Ch and 7Eh)
These two registers contain four 8-bit ID codes. The first three codes have been assigned by
Microsoft using their Plug and Play Vendor ID methodology. The fourth code is a IDT, Inc. assigned
code identifying the STAC9766/9767. The ID1 register (index 7Ch) contains the value 8384h, which
is the first (83h) and second (84h) bytes of the Microsoft ID code. The ID2 register (index 7Eh) contains the value 7666h, which is the third (76h) byte of the Microsoft ID code, and 66h which is the
STAC9766/9767 ID code.
IDT™
79
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
STAC9766/9767
V 7.4 12/06
STAC9766/9767
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
8.5.1.
PC AUDIO
Vendor ID1 (7Ch)
Default: 8384h
8.5.2.
D15
D14
D13
D12
D11
D10
D9
D8
1
D7
0
D6
0
D5
0
D4
0
D3
0
D2
1
D1
1
D0
1
0
0
0
0
1
0
0
D13
D12
D11
D10
D9
D8
Vendor ID2 (7Eh)
Default: 7666h
D15
IDT™
D14
0
1
1
1
0
1
1
0
D7
0
D6
1
D5
1
D4
0
D3
0
D2
1
D1
1
D0
0
80
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
STAC9766/9767
V 7.4 12/06
STAC9766/9767
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
PC AUDIO
9. LOW POWER MODES
The STAC9766/9767 is capable of operating at reduced power when no activity is required. The
power-down state is controlled by the Powerdown Register (26h). There are seven separate
power-down commands. The power down options are listed in Table 29. The first three bits,
PR0..PR2, can be used individually or in combination with each other, and control power distribution
to the ADCs, DACs and Mixer. The last analog power control bit, PR3, affects analog bias and reference voltages, and can only be used in combination with PR1, PR2 and PR3. PR3 essentially
removes power from all analog sections of the CODEC and is generally only asserted when the
CODEC will not be needed for long periods. PR0 and PR1 control the PCM ADCs and DACs only.
PR2 and PR3 do not need to be “set” before a PR4, but PR0 and PR1 should be “set” before PR4.
PR5 disables the DSP clock and does not require an external cold reset for recovery. PR6 disables
the headphone driver amplifier for additional analog power saving.
Table 29. Low Power Modes
GRP Bits
PR0
Function
PCM in ADCs & Input Mux Powerdown
PR1
PCM out DACs Powerdown
PR2
PR3
Analog Mixer power down (VREF still on)
Analog Mixer power down (VREF off)
PR4
Digital Interface (AC-Link) power down (BIT_CLK forced low)
PR5
PR6
Digital Clock disable, BIT_CLK still on
Powerdown HEADPHONE_OUT
Figure 22. Example of STAC9766/9767 Powerdown/Powerup Flow
PR0=1
Normal
PR1=1
ADCs off PR0
PR0=0 & ADC=1
Ready =1
PR2=1
DACs off PR1
PR1=0 & DAC=1
PR4=1
Analog off
PR2 or PR3
PR2=0 & ANL=1
Default
Digital I/F off
PR4
Shut off
AC-Link
Warm Reset
Cold Reset
Figure 22 illustrates an example procedure to do a complete power down of STAC9766/9767. From
normal operation, sequential writes to the Powerdown Register are performed to power down
STAC9766/9767 a section at a time. After everything has been shut off, a final write (of PR4) can be
executed to shut down the AC-Link. The part will remain in sleep mode with all its registers holding
their static values. To wake up, the AC'97 controller will send an extended pulse on the sync line,
issuing a warm reset. This will restart the AC-Link (resetting PR4 to zero). The STAC9766/9767 can
also be woken up with a cold reset. A cold reset will reset all of the registers to their default states
(Paged Registers are semi-exempt). When a section is powered back on, the Powerdown Control/
Status register (index 26h) should be read to verify that the section is ready (stable) before attempting any operation that requires it.
IDT™
81
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
STAC9766/9767
V 7.4 12/06
STAC9766/9767
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
PC AUDIO
Figure 23. Powerdown/Powerup Flow With Analog Still Alive
PR0=1
Normal
PR1=1
ADCs off PR0
PR0=0 & ADC=1
PR4=1
DACs off PR1
PR1=0 & DAC=1
Digital I/F off
PR4
Shut off
AC-Link
Warm Reset
Figure 23 illustrates a state when all the mixers work with the static volume settings that are contained in their associated registers. This configuration can be used when playing a CD (or external
LINE_IN source) through STAC9766/9767 to the speakers, with most of the system in low power
mode. The procedure for this follows the previous example except that the analog mixer is never
shut down.
IDT™
82
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
STAC9766/9767
V 7.4 12/06
STAC9766/9767
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
PC AUDIO
10.MULTIPLE CODEC SUPPORT
The STAC9766/9767 provides support for the multi-CODEC option according to the Intel AC'97, rev
2.3 specification. By definition there can be only one Primary CODEC (CODEC ID 00) and up to
three Secondary CODECs (CODEC IDs 01, 10 and 11). The CODEC ID functions as a chip select.
Secondary devices therefore have completely orthogonal register sets; each is individually accessible and they do not share registers.
10.1. Primary/Secondary CODEC Selection
In a multi-CODEC environment the CODEC ID is provided by external programming of pins 45 and
46 (CID0 and CID1). The CID pin electrical function is logically inverted from the CODEC ID designation. The corresponding pin state and its associated CODEC ID are listed in the “CODEC ID
Selection” table. Also see slot assignment discussion, “Multi-Channel Programming Register
(Index 74h)”.
Table 30. CODEC ID Selection
10.1.1.
CID1 State
CID0 State
CODEC ID
CODEC Status
Dvdd or floating
Dvdd or floating
Dvdd or floating
0V
00
01
Primary
Secondary
0V
Dvdd or floating
10
Secondary
0V
0V
11
Secondary
Primary CODEC Operation
As a Primary device the STAC9766/9767 is completely compatible with existing AC'97 definitions
and extensions. Primary CODEC registers are accessed exactly as defined in the AC'97 Component
Specification and AC'97 Extensions. The STAC9766/9767operates as Primary by default, and the
external ID pins (45 and 46), have internal pull-ups so that these pins may be left as no-connects for
primary operation.
When used as the Primary CODEC, the STAC9766/9767 generates the master AC-Link BIT_CLK
for both the AC'97 Digital Controller and any Secondary CODECs. The STAC9766/9767can support
up to four loads of 10 KΩ / 50 pF on the BIT_CLK output. This is to ensure that up to four CODECs
will not load down the clock output.
10.1.2.
Secondary CODEC Operation
When the STAC9766/9767 is configured as a Secondary device the BIT_CLK pin is configured as an
input at power up. Using the BIT_CLK provided by the Primary CODEC insures that everything on
the AC-Link will be synchronous. As a Secondary device it can be defined as CODEC ID 01, 10, or
11 in the two-bit field(s) of the Extended Audio and/or Extended Modem ID Register(s).
IDT™
83
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
STAC9766/9767
V 7.4 12/06
STAC9766/9767
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
PC AUDIO
10.2. Secondary CODEC Register Access Definitions
The AC'97 Digital Controller can independently access Primary and Secondary CODEC registers by
using a 2-bit CODEC ID field (chip select) which is defined as the LSBs of Output Slot 0. For Secondary CODEC access, the AC'97 Digital Controller must invalidate the tag bits for Slot 1 and 2
Command Address and Data (Slot 0, bits 14 and 13) and place a non-zero value (01, 10, or 11) into
the CODEC ID field (Slot 0, bits 1 and 0).
As a Secondary CODEC, the STAC9766/9767 will disregard the Command Address and Command
Data (Slot 0, bits 14 and 13) tag bits when it sees a 2-bit CODEC ID value (Slot 0, bits 1 and 0) that
matches its configuration. In a sense the Secondary CODEC ID field functions as an alternative
Valid Command Address (for Secondary reads and writes) and Command Data (for Secondary
writes) tag indicator.
Secondary CODECs must monitor the Frame Valid bit, and ignore the frame (regardless of the state
of the Secondary CODEC ID bits) if it is not valid. AC'97 Digital Controllers should set the frame valid
bit for a frame with a secondary register access, even if no other bits in the output tag slot except the
Secondary CODEC ID bits are set.
This method is designed to be backward compatible with existing AC'97 controllers and CODECs.
There is no change to output Slot 1 or 2 definitions.
Table 31. Secondary CODEC Register Access Slot 0 Bit Definitions
Bit
Output Tag Slot (16-bits)
Description
15
Frame Valid
14
13
Slot 1 Valid Command Address bit (†Primary CODEC only)
Slot 2 Valid Command Data bit (†Primary CODEC only)
12-3
Slot 3-12 Valid bits as defined by AC'97
2
Note:
Reserved (Set to “0”)
2-bit CODEC ID field
(00 reserved for Primary; 01, 10, 11 indicate
†1-0
Secondary)
† New definitions for Secondary CODEC Register Access
Using three CODECs typically requires a controller to support SDATA_IN2.
IDT™
84
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
STAC9766/9767
V 7.4 12/06
STAC9766/9767
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
PC AUDIO
11.TESTABILITY
The STAC9766/9767 has two test modes. One is for ATE in-circuit test and the other is restricted for
IDT’s internal use. STAC9766/9767 enters the ATE in-circuit test mode if SDATA_OUT is sampled
high at the trailing edge of RESET#. Once in the ATE test mode, the digital AC-Link outputs
(BIT_CLK and SDATA_IN) are driven to a high impedance state. This allows ATE in-circuit testing of
the AC'97 controller. Use of the ATE test mode is the recommended means of removing the CODEC
from the AC-Link when another CODEC is to be used as the primary. This case will never occur during standard operating conditions. Once either of the two test modes have been entered, the
STAC9766/9767 must be issued another RESET# with all AC-link signals held low to return to the
normal operating mode.
Table 32. Test Mode Activation
SYNC
0
SDATA_OUT
0
Description
Normal AC '97 operation
0
1
ATE Test Mode
1
1
0
1
IDT Internal Test Mode
Reserved
11.1. ATE Test Mode
ATE test mode allows for in-circuit testing to be completed at the board level. For this to work, the
outputs of the device must be driven to a high impedance state (Z). Internal pullups for digital I/O
pins must be disabled in this mode. This mode initiates on the rising edge of RESET# pin. Only a
cold reset will exit the ATE Test Mode.
Table 33. ATE Test Mode Operation
IDT™
Pin Name
Pin #
Function
Description
SDATA_OUT
5
1
BIT_CLK
6
Z
SDATA_IN
8
Z
SYNC
10
0
RESET#
11
1
No Connect
31
Z
Always an input
No Connect
33
Z
Always an input
No Connect
34
Z
Always an input
GPIO0
43
Z
GPIO1
44
Z
CID0
45
Z
CID1
46
Z
EAPD
47
Z
SPDIF
48
Z
Must be held high at the rising edge of RESET#
Must be held low at rising edge of RESET#
85
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
STAC9766/9767
V 7.4 12/06
STAC9766/9767
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
PC AUDIO
12.ORDERING INFORMATION
12.1. STAC9766/9767 Family Options and Part Order Numbers
Table 34. STAC9766/9767 Ordering Information
Part Order Number
Supply Range
Package
STAC9766XXTAEyyX
STAC9767XXTAEyyX
DVdd = 3.3V, AVdd = 5.0V
DVdd = 3.3V, AVdd = 3.3V
48-pin RoHS QFP 7mm x 7mm x 1.4mm
48-pin RoHS QFP 7mm x 7mm x 1.4mm
NOTE: When ordering these parts the “yy” will be replaced with the CODEC revision. Add an “R” to
the end of any of these part numbers for delivery on Tape and Reel. The minimum order quantity for
Tape and Reel is 2,000 units for both package options.
IDT™
86
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
STAC9766/9767
V 7.4 12/06
STAC9766/9767
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
PC AUDIO
13.PIN DESCRIPTION
36
35
34
33
32
31
30
29
28
27
26
25
LINE_OUT_R
LINE_OUT_L
NC
NC
CAP2
NC
AFILT2
AFILT1
VREFout
VREF
AVss1
AVdd1
Figure 24. Pin Description Drawing
37
38
39
40
41
42
43
44
45
46
47
48
48-Pin TQFP
24
23
22
21
20
19
18
17
16
15
14
13
LINE_IN_R
LINE_IN_L
MIC2
MIC1
CD_R
CD_GND
CD_L
VIDEO_R
VIDEO_L
AUX_R
AUX_L
PHONE
DVdd1 1
XTL_IN 2
XTL_OUT 3
DVss1 4
SDATA_OUT 5
BIT_CLK 6
DVss2 7
SDATA_IN 8
DVdd2 9
SYNC 10
RESET# 11
PC_BEEP 12
MONO_OUT
AVdd2
HP_OUT_L
HP_COMM
HP_OUT_R
AVss2
GPIO0
GPIO1
CID0
CID1
EAPD
SPDIF
Pin 48: To Enable SPDIF, use a 1KΩ - 1 0 KΩ external pulldown. To Disable SPDIF, use a
1 KΩ - 1 0 KΩ external pullup. Do NOT leave Pin 48 floating.
The CD_GND signal is an AC signal return for the two CD input channels. It is normally biased at
about 2.5V. The name of the pin in the AC97 specification is CD_GND, and this has confused many
designers. It should not have any DC path to GND. Connecting the CD_GND signal directly to
ground will change the internal bias of the entire CODEC, and cause significant distortion. If there is
no analog CD input, then this pin can be No-Connect.
IDT™
87
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
STAC9766/9767
V 7.4 12/06
STAC9766/9767
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
PC AUDIO
13.1. Digital I/O
These signals connect the STAC9766/9767 to its AC'97 controller counterpart, an external crystal,
multi-CODEC selection and external audio amplifier.
Table 35. Digital Connection Signals
Pin Name
Pin #
Type
XTL_IN
2
I
XTL_OUT
3
I/O
SDATA_OUT
5
I
BIT_CLK
6
I/O
12.288 MHz serial data clock
SDATA_IN
8
O
Serial, time division multiplexed, AC'97 output stream
SYNC
10
I
48 KHz fixed rate sample sync
RESET#
11
I
AC'97 Master H/W Reset
No Connect
31
I
IDT Internal Test mode only.
No Connect
33
I
IDT Internal Test mode only
No Connect
34
I/O
IDT Internal Test mode only
GPIO0
43
I/O
General Purpose I/O
GPIO1
44
I/O
General Purpose I/O
CID0
45
I
Multi-CODEC ID select – bit 0
CID1
46
I
Multi-CODEC ID select – bit 1
EAPD
47
I/O
External Amplifier Power Down/GPIO
I/O
SPDIF digital output
Pin 48: To Enable SPDIF, use a 1KΩ - 1 0 KΩ external pulldown. To
Disable SPDIF, use a 1KΩ - 1 0 KΩ external pullup. Do NOT leave Pin 48
floating.
SPDIF
48
Description
24.576 MHz Crystal or External Clock Source
24.576 MHz Crystal
Serial, time division multiplexed, AC'97 input stream
13.2. Filter/References
These signals are connected to resistors, capacitors, or specific voltages.
Table 36. Filtering and Voltage References
IDT™
Signal Name
Pin Number
Type
Description
VREF
27
O
Analog ground (0.45*Vdd, at 5V; 0.41*Vdd at 3V)
VREFOUT
28
O
Reference Voltage out 5mA drive (intended for mic bias) (~Vdd/2)
AFILT1
29
O
Anti-Aliasing Filter Cap - ADC left channel
AFILT2
30
O
Anti-Aliasing Filter Cap - ADC right channel
CAP2
32
O
ADC Reference Cap
88
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
STAC9766/9767
V 7.4 12/06
STAC9766/9767
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
PC AUDIO
13.3. Analog I/O
These signals connect the STAC9766/9767 to analog sources and sinks, including microphones and
speakers.
Table 37. Analog Connection Signals
Pin Name
Pin #
Type
Description
PC-BEEP
12
I*
PC Speaker beep pass-through
PHONE
13
I*
From telephony subsystem speakerphone
AUX_L
14
I*
Aux Left Channel
AUX_R
15
I*
Aux Right Channel
VIDEO_L
16
I*
Video Audio Left Channel
VIDEO_R
17
I*
Video Audio Right Channel
CD_L
18
I*
CD Audio Left Channel
CD_GND†
19
I*
CD Audio analog signal return
CD_R
20
I*
CD Audio Right Channel
MIC1
21
I*
Desktop Stereo or Mono Microphone Input
MIC2
22
I*
Stereo or Second Mono Microphone Input
LINE_IN_L
23
I*
Line In Left Channel
LINE_IN_R
24
I*
Line In Right Channel
LINE_OUT_L
35
O
Line Out Left Channel
LINE_OUT_R
36
O
Line Out Right Channel
MONO_OUT
37
O
To telephony subsystem speakerphone
HP_OUT_L
39
O
Headphone Out Left Channel
HP_COMM
40
O
Headphone Ground Return
HP_OUT_R
41
O
Headphone Out Right Channel
†
Note: * Any unused input pins should be tied together through a capacitor (0.1 µF suggested) to
ground, except the MIC inputs which should have their own capacitor to ground if not used.
Note: † The CD_GND signal is an AC signal return for the two CD input channels. It is normally
biased at about 2.5V. The name of the pin in the AC97 specification is CD_GND, and this has
confused many designers. It should not have any DC path to GND. Connecting the CD_GND
signal directly to ground will change the internal bias of the entire CODEC, and cause significant
distortion. If there is no analog CD input, then this pin can be No-Connect.
IDT™
89
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
STAC9766/9767
V 7.4 12/06
STAC9766/9767
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
PC AUDIO
13.4. Power and Ground Signals
Table 38. Power and Ground Signals
IDT™
Pin Name
Pin #
Type
Description
AVdd1
25
I
Analog Vdd = 5.0 V or 3.3 V
AVdd2
38
I
Analog Vdd = 5.0 V or 3.3 V
AVss1
26
I
Analog Gnd
AVss2
42
I
Analog Gnd
DVdd1
1
I
Digital Vdd = 3.3 V
DVdd2
9
I
Digital Vdd = 3.3 V
DVss1
4
I
Digital Gnd
DVss2
7
I
Digital Gnd
90
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
STAC9766/9767
V 7.4 12/06
STAC9766/9767
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
PC AUDIO
14.PACKAGE DRAWING
14.1. 48-Pin LQFP
Figure 25. 48-Pin LQFP Package Outline and Package Dimensions
A2
D
Key
A
A1
D1
E1
E
b
48 pin LQFP
e
LQFP Dimensions in mm
Min
Nom
Max
A
1.40
1.50
1.60
A1
0.05
0.10
0.15
A2
1.35
1.40
1.45
D
8.80
9.00
9.20
D1
6.90
7.00
7.10
E
8.80
9.00
9.20
E1
6.90
7.00
7.10
L
0.45
0.60
0.75
e
Pin 1
0.50
C
0.09
-
0.20
b
0.17
0.22
0.27
c
IDT™
91
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
STAC9766/9767
V 7.4 12/06
STAC9766/9767
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
PC AUDIO
15.SOLDER REFLOW PROFILE
15.1. Standard Reflow Profile Data
Note: These devices can be hand soldered at 360 o C for 3 to 5 seconds.
FROM: IPC / JEDEC J-STD-020C “Moisture/Reflow Sensitivity Classification for Nonhermetic Solid State Surface Mount
Devices” (www.jedec.org/download).
Profile Feature
Pb Free Assembly
Average Ramp-Up Rate (Tsmax - Tp)
3 oC / second max
Preheat
Temperature Min (Tsmin )
Temperature Max
(Tsmax)
Time (tsmin - tsmax)
150 o C
200 o C
60 - 180 seconds
Time maintained above
Temperature (TL )
Time (tL )
217 o C
60 - 150 seconds
Peak / Classification Temperature (Tp)
Time within 5 o C of actual Peak Temperature (tp)
Ramp-Down rate
Time 25 o C to Peak Temperature
See “Package Classification Reflow Temperatures”
on page 93.
20 - 40 seconds
6 oC / second max
8 minutes max
Note: All temperatures refer to topside of the package, measured on the package body surface.
Figure 26. Solder Reflow Profile
IDT™
92
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
STAC9766/9767
V 7.4 12/06
STAC9766/9767
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
PC AUDIO
15.2. Pb Free Process - Package Classification Reflow Temperatures
IDT™
Package Type
MSL
Reflow Temperature
LQFP 48-pin
3
260 oC
93
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
STAC9766/9767
V 7.4 12/06
STAC9766/9767
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
PC AUDIO
16.APPENDIX A: PROGRAMMING REGISTERS
Reg #
Name
D15
D14
D13
D12
D11
D10
D9
D8
D7
D6
D5
D4
D3
D2
D1
D0
Default
00h
Reset
RSRVD
SE4
SE3
SE2
SE1
SE0
ID9
ID8
ID7
ID6
ID5
ID4
ID3
ID2
ID1
ID0
6A90h
02h
Master
Volume
Mute
RSVD
ML5
ML4
ML3
ML2
ML1
ML0
RSVD
MR5
MR4
MR3
MR2
MR1
MR0
8000h
04h
HP_OUT
Mixer Volume
Mute
RSVD
HPL5
HPL4
HPL3
HPL2 HPL1
HPL0
RSVD
HPR5
HPR4 HPR3 HPR2
HPR1
HPR0
8000h
06h
Master
Volume
Mono
Mute
MM5
MM4
MM3
MM2
MM1
MM0
8000h
0Ah
PC_BEEP
Volume
Mute
F0
PV3
PV2
PV1
PV0
RSRVD
0000h
0Ch
Phone
Volume
Mute
GN4
GN3
GN2
GN1
GN0
8008h
0Eh
Mic
Volume
Mute
GN4
GN3
GN2
GN1
GN0
8008h
10h
Line In
Volume
Mute
RSVD
GL4
GL3
GL2
GL1
GL0
RSVD
GR4
GR3
GR2
GR1
GR0
8808h
12h
CD
Volume
Mute
RSVD
GL4
GL3
GL2
GL1
GL0
RSVD
GR4
GR3
GR2
GR1
GR0
8808h
14h
Video
Volume
Mute
RSVD
GL4
GL3
GL2
GL1
GL0
RSVD
GR4
GR3
GR2
GR1
GR0
8808h
16h
AUX
Volume
Mute
RSVD
GL4
GL3
GL2
GL1
GL0
RSVD
GR4
GR3
GR2
GR1
GR0
8808h
18h
PCM Out
Volume
Mute
RSVD
GL4
GL3
GL2
GL1
GL0
RSVD
GR4
GR3
GR2
GR1
GR0
8808h
1Ah
Record
Select
SL2
SL1
SL0
SR2
SR1
SR0
0000h
1Ch
Record
Gain
Mute
GL2
GL1
GL0
GR2
GR1
GR0
8000h
20h
General
Purpose
POP BYP
MIX
MS
22h
3D
Control
24h
Audio Int.
& Paging
I4
I3
I2
I1
I0
26h
Powerdown
Ctrl/Stat
EAPD
PR6
PR5
PR4
PR3
28h
Extended
Audio ID
ID1
ID0
2Ah
Extended
Audio Control
/Status
VCFG
2Ch
PCM DAC
Rate
SR15
SR14
SR13
SR12
SR11
SR10
SR9
32h
PCM LR
ADC Rate
SR15
SR14
SR13
SR12
SR11
SR10
3Ah
SPDIF
Control
V
DRS
SPSR1
SPSR2
L
CC6
3Eh
Extended
Modem
Status
4Ch
GPIO Pin
Config
RSVD
GC1
GC0
(GPIO1) (GPIO0) 0300h
4Eh
GPIO Pin
Polarity/Type
RSVD
GP1
GP0
FFFFh
(GPIO1) (GPIO0)
50h
GPIO Pin
Sticky
RSVD
GS1
GS0
0000h
(GPIO1) (GPIO0)
52h
GPIO Pin
Mask
RSVD
GW1
GW0
(GPIO1) (GPIO0) 0000h
54h
GPIO Pin
Status
RSVD
GI1
GI0
0000h
(GPIO1) (GPIO0)
60h
Page 01h
CODEC
Class/Rev
RSVD
X
X
F7
F6
64h
IDT™
F
F3
F2
F1
RSVD
RSVD
RSVD
RSVD
RSRVD
GL3
3D
BOOSTEN
RSVD
RSVD
RSVD
RSVD
GR3
LPBK
RSVD
RSVD
RSVD
REV1
PRL/RSVD PRK/RSVD PRJ/RSVD PRI/RSVD
RSVD
PR2
PR1
RSVD
PR0
RSVD
CL4
CL3
PVI12
PVI11
DP3
DP2
PG3
PG2
PG1
PG0
0000h
REF
ANL
DAC
ADC
000Fh
DRA
VRA
0A05h
DRA/
RSVD
VRA
0400h*
0000h
CDAC
SPCV MADC/ LDAC/
RSVD RSVD
SDAC/
RSVD
CDAC/
RSVD
SR8
SR7
SR6
SR5
SR4
SR3
SR2
SR1
SR0
BB80h
SR9
SR8
SR7
SR6
SR5
SR4
SR3
SR2
SR1
SR0
BB80h
CC5
CC4
CC3
CC2
CC1
CC0
PRE
COPY
#PCM/
AUDIO
PRO
2000h
GPIO
0100h
CL2
CL1
CL0
DSA0 RSVD SPDIF
RSVD
SDAC
PRA
DSA1
0000h
REV0 AMAP LDAC
RSVD
62h
62h
Page 01h
F5
SPSA1 SPSA0 VRM/ SPDIF
RSVD
RSVD
RV7
RV6
RV5
RV4
RV3
RV2
RV1
RV0
12xxh
PVI6
PVI5
PVI4
PVI3
PVI2
PVI1
PVI0
FFFFh
VENDOR RESERVED
PCI SVID
PVI15
PVI14
PVI13
PVI10 PVI9
PVI8
PVI7
VENDOR RESERVED
94
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
STAC9766/9767
V 7.4 12/06
STAC9766/9767
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
PC AUDIO
Reg #
Name
D15
D14
D13
D12
D11
D10
D9
D8
D7
D6
D5
D4
D3
D2
D1
D0
Default
64h
Page 01h
PCI SID
PI15
PI14
PI13
PI12
PI11
PI10
PI9
PI8
PI7
PI6
PI5
PI4
PI3
PI2
PI1
PI0
FFFFh
FC3
FC2
FC1
FC0
T/R
0000h
FIP
xxxxh
66h
66h
Page 01h
VENDOR RESERVED
Function
Select
RSVD
68h
VENDOR RESERVED
68h
Page 01h
Function
Information
6Ah
Digital
Audio
Control
6Ah
Page 01h
Sense
Details
ST2
ST1
ST0
S4
S3
S2
S1
S0
OR1
OR0
SR5
SR4
6Ch
Revision
Code
0
0
0
0
0
0
0
0
0
0
0
MUTE
FIX
DISBLE
ADC
slot1
G4
G3
G2
G1
G0
INV
DL4
DL2
DL1
DL0
IV
RSVD
RSVD
6Ch
Page 01h
6Eh
DL3
SPOR
DO1
RSVD
0000h
SR3
SR2
SR1
SR0
NA
0
x
x
x
x
00xxh
ADC
slot0
RSVD
MIC
GAIN
VALUE
SPLY
OVR
EN
SPLY
OVR
VAL
1000h
RSVD
Analog
Special
AC97
ALL MIX
RSVD
RSVD
6Eh
Page 01h
RSVD
70h
VENDOR RESERVED
72h
Analog
Current
Adjust
74h
EAPD
Access
RSVD
EAPD
RESERVED
0000h
INT APOP
EAPD_OEN
76h
RSVD
RSVD
0000h
INTDIS
GPIO
ACC
GPIO
SLT12
VENDOR RESERVED
0800h
0000h
78h*
High Pass
Filter
Bypass
ADC
HPF
BYP
78h*
Stereo Mic
Enable
7Ah
RSVD
7Ch
Vendor
ID1
1
0
0
0
0
0
1
1
1
0
0
0
0
1
0
0
8384 h
7Eh
Vendor
ID2
9766
0
1
1
1
0
1
1
0
0
1
1
0
0
1
1
0
7666h
RSVD
RSVD
STEREO_MIC
RSVD
0000h
0000h
RSVD
0000h
*depends upon chip ID
IDT™
95
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
STAC9766/9767
V 7.4 12/06
STAC9766/9767
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
PC AUDIO
17.REVISION HISTORY
Revision
Date
History not included in Datasheet
7.1
7.2
October 2003
7.3
03 November 2006
7.4
Dec 2006
IDT™
Description of Change
Removed BIT_CLK as an input option from clocking table, it was incorrectly included in 3-1 version
Added CD_GND elaboration note on connection diagram, pin list and pin out diagrams:
“The CD_GND signal is an AC signal return for the two CD input channels. It is normally biased
at about 2.5V. The name of the pin in the AC’97 specification is CD_GND, and this has confused
many designers. It should not have any DC path to GND. Connecting the CD_GND signal
directly to ground will change the internal bias of the entire CODEC, and cause significant
distortion. If there is no analog CD input, then this pin can be No-Connect.”
Released in IDT format.
corrected orderable part number
96
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
STAC9766/9767
V 7.4 12/06
STAC9766/9767
TWO-CHANNEL, 20-BIT, AC’97 2.3 CODECS WITH STEREO MICROPHONE AND MIC/JACK SENSING
PC AUDIO
Innovate with IDT audio for high fidelity. Contact:
www.IDT.com
For Sales
For Tech Support
800-345-7015
408-284-8200
[email protected]
Fax: 408-284-2775
Corporate Headquarters
Europe
Integrated Device Technology, Inc.
6024 Silver Creek Valley Road
IDT Europe, Limited
Prime House
San Jose, CA 95138
United States
800 345 7015
Barnett Wood Lane
Leatherhead, Surrey
United Kingdom KT22 7DE
+408 284 8200 (outside U.S.)
+44 1372 363 339
© 2006 Integrated Device Technology, Inc. All rights reserved. Product specifications subject to change without notice. IDT and the IDT logo are trademarks of Integrated Device
Technology, Inc. Accelerated Thinking is a service mark of Integrated Device Technology, Inc. All other brands, product names and marks are or may be trademarks or registered
trademarks used to identify products or services of their respective owners.