Frequency Multiplier (x4, x8) Model BXMF1004 (150 - 200 MHz) Features • Low Additive Phase Noise: -146 dBc/Hz @ 1 kHz Offset (x8) • Excellent Harmonic Performance: -50 dBc • Low Discrete Spurious: -75 dBc • High Reliability: 200,000 Hr MTBF • Low Harmonic & Sub-Harmonic Content: -60 dBc Description Typical Specifications Spectrum Microwave offers a line of low noise frequency multipliers based on multiple passive doubler/amplifier combinations. This series of multipliers cover input frequency ranges of 150 to 200 MHz with output frequencies from 600 to 1600 MHz. Additive phase noise testing ensures low phase noise/jitter performance. All internal amplifiers and doublers are contained in rugged TO-8 hermetic packages for excellent performance over military environmental conditions. Input Frequency Input Level Output Frequency x4 Output Frequency x8 Power Input Output Level Bandwidth Switching Speed Harmonics Sub-Harminics ECL Differential Delay Phase Noise (Ref. to input) Optional Features • Output Filtering • Digital ECL Outputs (Single or Differential) • Built-in Test Power Detectors DC Power • Internal Voltage Regulators Temp Range Applications • • • • Synthesizer Building Block SIGINT ELINT EW 150 to 200 MHz +10 dBm 600 to 800 MHz 1200 to 1600 MHz +10 dBm +3 dBm 1% 90 nsec -50 dBc -70 dBc 100 psec -146 dBc/Hz @ 1 kHz -158 dBc/Hz @ 10 kHz -158 dBc/Hz @ 100 kHz +15 V @ 250 mA +5 V @ 60 mA 0oC to +70oC All specifications above typical, measured at 25 oC Dimensions and Connections 4.5” L x 4.5” W x 1.5” H Revision; 7/5/2012 Spectrum Microwave, Inc. • P: 888.553.7531 • F: 888.553.7532 E-mail: [email protected] • www.SpectrumMicrowave.com