Axial Lead & Cartridge Fuses 5×20 mm > Fast-Acting > 217 Series 217 Series, 5 × 20 mm, Fast-acting Fuse RoHS Pb PS E Description 5×20mm fast-acting glass body cartridge fuse designed to IEC specification. Features • Designed to International (IEC ) Standards for use globally • Meets the IEC 60127-2, Sheet 2 specification for fast-acting fuses Agency Approvals Agency PS E Agency File Number Cartridge: NBK090205-E10480A NBK120802-E10480C Leaded: NBK090205-E10480B NBK120802-E10480D 2002010207007600 SU05001-3004 SU05001-2005 SU05001-2006 SU05001-2007 E10480 • RoHS compliant and lead-free Applications Ampere Range 1A – 5A 6.3A – 15A 1A – 5A 6.3A – 15A 0.032A – 6.3A 0.032A – 40mA 50mA – 0.0315A 0.0400A – 6.3A 8A & 10A Used as supplementary protection in appliance or utilization equipment to provide individual protection for components or internal circuits. Electrical Characteristics for Series % of Ampere Rating 150% 0.032A – 10A 210% 29862 0.032A – 6.3A 1517221 0.032A – 6.3A 40014645 0.032A – 6.3A, 8A*, 10A* 40016647 15A* KM41462 0.0400A – 6.3A N/A • Available in cartridge and axial lead form 0.032A – 15A 275% 400% 1000% *Approval for cartridge versions only Ampere Rating Opening Time 0.032A–0.0100A 60 minutes, Minimum 0.0125A-6.3A 60 minutes, Minimum 8A-15A 30 minutes, Minimum 0.032A-0.0100A 30 minutes, Maximum 0.0125A-6.3A 30 minutes, Maximum 8A-15A 30 minutes, Maximum 0.032A-0.0100A 0.01 sec., Min.; .5 sec. Max. 0.0125A-6.3A 0.05 sec., Min.; 2 sec. Max. 8A-15A 0.05 sec., Min.; 2 sec. Max. 0.032A-0.0100A .003 sec., Min.; 0.1 sec.. Max. 0.0125A-6.3A .01 sec., Min.; 0.3 sec. Max. 8A-15A .01 sec., Min.; 0.4 sec. Max. 0.032A-0.0100A .02 second, Maximum 0.0125A-6.3A .02 second, Maximum 8A-15A .04 second, Maximum Additional Information Datasheet Resources Samples Accessories For recommended fuse accessories for this product series, see ‘Recommended Accessories’ section. © 2016 Littelfuse, Inc. Application testing is strongly recommended. Specifications are subject to change without notice. Revised: 06/06/16 Axial Lead & Cartridge Fuses 5×20 mm > Fast-Acting > 217 Series Electrical Characteristic Specifications by Item Nominal Cold Resistance (Ohms) Agency Approvals Amp Rating (A) Voltage Rating (V) .032 0.032 250 262.2000 0.00015 10000 1.6 x x x x x x x .040 0.04 250 183.1500 0.00008 8000 1.6 x x x x x x x .050 0.05 250 15.2000 0.00049 7000 1.6 x x x x x x x .063 0.063 250 10.4500 0.00056 5000 1.6 x x x x x x x .080 0.08 250 7.8900 0.00132 4000 1.6 x x x x x x x .100 0.1 250 5.6965 0.00260 3500 1.6 x x x x x x x .125 0.125 250 3.8200 0.00478 2000 1.6 x x x x x x x .160 0.16 250 2.5250 0.01000 2000 1.6 x x x x x x x .200 0.2 250 1.7000 0.02000 1700 1.6 x x x x x x x .250 0.25 250 1.2325 0.04000 1400 1.6 x x x x x x x .315 0.315 250 0.8800 0.11000 1300 1.6 x x x x x x x .400 0.4 250 0.2770 0.12500 1200 1.6 x x x x x x x x .500 0.5 250 0.2065 0.21500 1000 1.6 x x x x x x x x .630 0.63 250 0.1900 0.41000 650 1.6 x x x x x x x x .800 0.8 250 0.1203 0.85000 240 1.6 x x x x x x x x 001. 1 250 0.0964 1.04500 200 1.6 x x x x x x x x x 1.25 1.25 250 0.0701 2.23000 200 1.6 x x x x x x x x x 01.6 1.6 250 0.0528 4.61500 190 1.6 x x x x x x x x x 002. 2 250 0.0416 5.73000 170 1.6 x x x x x x x x x 02.5 2.5 250 0.0334 9.46000 170 1.6 x x x x x x x x x 3.15 3.15 250 0.0224 17.72000 150 2.5 x x x x x x x x x 004. 4 250 40A @ 250VAC 0.0165 29.16500 130 2.5 x x x x x x x x x 005. 5 250 50A @ 250VAC 0.0137 42.79500 130 2.5 x x x x x x x x x 06.3 6.3 250 63A @ 250VAC 0.0095 62.46500 130 2.5 x x x x x x x x x 008. 8 250 80A @ 250VAC 0.0068 198.16000 130 4 x x x x x* 010. 10 250 100A @ 250VAC 0.0063 217.63500 130 4 x x x x x* 015. 15 250 150A @ 250VAC 0.0040 607.13500 130 4 x x* Interrupting Rating 35A @ 250VAC Nominal Melting 2 I t (A2 sec) Maximum Maximum Voltage Drop Power at Rated Dissipation Current At (mV) 1.5ln(W) Amp Code PS E x * Approval for cartidge versions only. Average Time Current Curves 0.032A 0.040A 0.050A 0.063A 0.080A 0.100A 0.125A 0.160A 0.200A 0.250A 0.315A 0.400A 0.500A 0.630A 0.800A 1A 1.25A 1.6A 2A 2.5A 3.15A 4A 5A 6.3A 8A 10A 15A Temperature Re-rating Curve 10000 1000 TIME IN SECONDS 100 10 1 0.1 0.01 Note: Rerating depicted in this curve is in addition to the standard derating of 25% for continuous operation. © 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 06/06/16 0.001 0.01 0.1 1 10 CURRENT IN AMPERES 100 1000 Axial Lead & Cartridge Fuses 5×20 mm > Fast-Acting > 217 Series Soldering Parameters - Wave Soldering Recommended Process Parameters: 280 Wave Parameter 260 240 Lead-Free Recommendation Preheat: 220 (Depends on Flux Activation Temperature) 200 180 160 140 120 100 80 60 (Typical Industry Recommendation) Temperature Minimum: 100°C Temperature Maximum: Preheat Time: 150°C 60-180 seconds Solder Pot Temperature: 260°C Maximum Solder Dwell Time: 2-5 seconds 40 Recommended Hand-Solder Parameters: Time (Seconds) Cooling Time Preheat Time Dwell Time 240 230 220 210 200 190 180 170 160 150 140 130 120 110 90 100 80 70 60 50 40 30 0 0 20 20 10 Temperature (°C) - Measured on bottom side of board 300 Solder Iron Temperature: 350°C +/- 5°C Heating Time: 5 seconds max. Note: These devices are not recommended for IR or Convection Reflow process. Product Characteristics Material Body: Glass Cap: Nickel–plated brass Leads: Tin–plated Copper Terminal Strength MIL-STD-202, Method 211, Test Condition A Solderability MIL-STD-202 method 208 Product Marking Cap1: Brand logo, current and voltage ratings Cap2: Agency approval marks Packaging Available in Bulk (M=1000 pcs/pkg) or on Tape/Reel (MRET1=1000 pcs/ reel) Operating Temperature –55OC to +125OC Thermal Shock MIL-STD-202, Method 107, Test Condition B: (5 cycles –65°C to +125°C) Vibration MIL-STD-202, Method 201 Humidity Salt Spray MIL-STD-202, Method 103, Test Condition A. high RH (95%) and elevated temperature (40°C) for 240 hours. MIL-STD-202, Method 101, Test Condition B © 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 06/06/16 Axial Lead & Cartridge Fuses 5×20 mm > Fast-Acting > 217 Series Dimensions Part Numbering System 20+0.5 0217 000P 0217 xxxx M X E P 5.2+0.1 -0.2 5.1+0.6 Series 5.1+0.6 Amp Code Refer to Amp Code column of Electrical Characteristics Table 5.6±0.4 21.5±1.0 40±1.0 0217.032 XEP to 0217.315 XEP Quantity Code M = 1000 Packaging Code 0.65±0.05 X = Filler Option Codes 40±1.0 0217.400 XEP to 0217015 XEP Blank = Cartridge Type Fuse E = Axial Leaded Fuse 5.5±0.3 21.5±1.0 Lead-free 0.65±0.05* All dimensions in mm Notes: * Ratings above 6.3A have 0.8±0.05 diameter lead. Packaging Packaging Option Packaging Specification Quantity Quantity & Packaging Code Taping Width N/A N/A EIA 296-E N/A N/A N/A 1000 1000 1000 1000 1000 100 MX MXE MRET1 MXG MXB HX N/A N/A T1=53mm (2.087”) N/A N/A N/A 217 Series Bulk Bulk Reel and Tape Bulk Bulk Bulk Recommended Accessories Accessory Type Holder Block Clip Max Application Voltage Max Application Amperage Series Description 345_ISF Panel Mount Shock-Safe Fuseholder 10 345 Shock-Safe Fuseholder with PC Mount, Solder Mount and Panel Mount options 20 830 PC Mount Shock-Safe Miniature Fuseholder 16 520 Metric OMNI-BLOK® Fuse Block 646 PC Mount Miniature Fuse Block 658 Surface Mount Miniature Fuse Block 10 520_W PC Mount Miniature Fuse Clip 6.3 111 PC Board Mount Fuse Clip 10 445 PC Board Mount Fuse Clip 10 Notes: 1. Do not use in applications above rating. 2. Please refer to fuseholder data sheet for specific re-rating information. 3. Please contact factory for applications greater than the max voltage and amperage shown. © 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 06/06/16 10 250 6.3