Schottky Barrier Rectifier MBRB10100CT 2x 5A, 100V, TO-263 Common Cathode MBRB10100CT RoHS Pb Description Littelfuse MBR series Schottky Barrier Rectifier is designed to meet the general requirements of commercial applications by providing high temperature, low leakage and low VF products. It is suitable for high frequency switching mode power supply, free-wheeling diodes and polarity protection diodes. Features Pin out • H igh junction temperature capability Heat sink Heat sink Common Cathode 1 Anode 3 Anode Pinout 1 D2-PAK & D-PAK Common Cathode 3 2 Anode Common Anode Cathode Pinout 2 TO-220AB Common Cathode Applications 1 2 • • C ommon cathode configuration in surface mount TO-263 package 3 Anode Common Anode witching Cathode S mode power • DC/DC converters supply • Polarity protection diodes • Free-wheeling Pinoutdiodes 3 ITO-220AB Common Cathode Maximum Ratings Parameters Peak Inverse Voltage Average • High frequency operation • G uard ring for enhanced ruggedness and long term reliability Common Cathode 1 • Low forward voltage drop Cathode Common Cathode Forward Anode 1 3 2 Peak One Cycle Non-Repetitive Surge Current (per leg) Pinout 4 Heat sinkTest Conditions Symbol Max Unit - 100 V 50% duty cycle @TC = 105°C, rectangular wave form 5 (per leg) Cathode VRWM IF(AV) IFSM ITO-220AB Common Anode Cathode 1 10 (total device) Anode 120 8.3ms,half Sine pulse 2 A A Pinout 5 TO-220AC Electrical Characteristics Parameters Forward Voltage Drop (per leg) * Symbol Test Conditions Max VF1 @ 5A, Pulse, TJ = 25 °C 0.85 VF2 @ 5A, Pulse, TJ = 125 °C 0.75 Unit V Reverse Current at DC condition (per leg) IR1 @VR = rated VR TJ = 25 °C 1.0 Reverse Current (per leg) * IR2 @VR = rated VR TJ = 125 °C 15 Junction Capacitance (per leg) CT @VR = 5V, TC = 25 °C fSIG = 1MHz 300 pF Typical Series Inductance (per leg) LS Measured lead to lead 5 mm from package body 8.0 nH 10,000 V/μs Voltage Rate of Change * Pulse Width < 300μs, Duty Cycle <2% dv/dt mA ©2015 Littelfuse, Inc Specifications are subject to change without notice. Revised:01/20/16 Schottky Barrier Rectifier MBRB10100CT 2x 5A, 100V, TO-263 Common Cathode Thermal-Mechanical Specifications Parameters Symbol Max Unit Junction Temperature TJ -55 to +150 °C -55 to +150 °C 6.0 °C/W 1.85 g Storage Temperature Tstg Thermal Resistance Junction to Case (per leg) RthJC Approximate Weight wt Test Conditions DC operation D2PAK (TO-263) Case Style Figure 1: Typical Forward Characteristics Figure 2: Typical Reverse Characteristics ºC ºC ºC ºC Figure 3: Typical Junction Capacitance ºC ©2015 Littelfuse, Inc Specifications are subject to change without notice. Revised:01/20/16 Schottky Barrier Rectifier MBRB10100CT 2x 5A, 100V, TO-263 Common Cathode Dimensions-D2PAK(TO-263) Millimeters Min Max A 4.06 4.83 A1 0.00 0.25 b 0.51 0.99 b1 1.14 1.78 c 0.31* 0.74 c1 1.14 1.65 D 8.38 9.65 D1 6.40* - E 9.65 10.67 E1 6.22 - E2 9.65 10.67 2.54 BSC e H 14.60* 15.88 L 1.78 2.79 L1 - 1.68 L2 - 1.78 0.254 BSC L3 Footnote *: The spec. does not comply with JEDEC spec. Carrier Tape & Reel Specification Symbol Part Numbering and Marking System MBRB10100CT LF YYWWL MBR B 10 100 CT LF YY WW L = Device Type = Package type = Forward Current (10A) = Reverse Voltage (100V) = Configuration = Littelfuse = Year = Week = Lot Number Millimeters Min Max A 10.70 10.90 B 16.03 16.23 C 5.11 5.31 d ø1.45 ø1.65 E 1.65 1.85 11.60 F 11.40 P0 3.90 4.10 P 15.90 16.10 P1 1.90 2.10 W 23.90 24.30 Packing Options Part Number Marking Packing Mode M.O.Q MBRB10100CT MBRB10100CT 800pcs / reel 800 ©2015 Littelfuse, Inc Specifications are subject to change without notice. Revised:01/20/16