Schottky Barrier Rectifier MBRF10150CTL, 2x 5A, 150V, ITO-220AB, Common Cathode MBRF10150CTL Pb RoHS Description Littelfuse MBR series Schottky Barrier Rectifier is designed to meet the general requirements of commercial applications by providing high temperature, low leakage and low VF products. It is suitable for high frequency switching mode power supply, free-wheeling diodes and polarity protection diodes. Features • H igh junction temperature capability Pin out Heat sink on e • G uard ring for enhanced ruggedness and long term reliability Common Cathode • H igh frequency operation • Common cathode configuration in electrically isolated ITO220AB package • Low forward voltage drop 3 ode K e 1 3 2 1 Anode Common Anode Cathode 2 Anode Common Anode Cathode Pinout 2 TO-220AB Common Cathode Maximum Ratings • DC/DC converters • Polarity protection diodes • Free-wheeling diodes Parameters Symbol Test Conditions Max Unit Peak Inverse Voltage VRWM - 150 V Average Forward Current IF(AV) 50% duty cycle @TC = 100°C, rectangular wave form 10 (total device) Peak One Cycle Non-Repetitive Cathode Anode Surge Current (per leg) IFSM 8.3 ms, half Sine pulse 138 Cathode 3 • S witching mode power supply Pinout 3 ITO-220AB Common Cathode Heat sink Cathode Applications 3 1 5 (per leg) A 2 Pinout 5 Electrical Characteristics TO-220AC Parameters Symbol VF1 Forward Voltage Drop (per leg) * VF2 Test Conditions Max @ 3A, Pulse, TJ = 25 °C 0.87 @ 5A, Pulse, TJ = 25 °C 0.93 @ 3A, Pulse, TJ = 125 °C 0.67 Unit V @ 5A, Pulse, TJ = 125 °C 0.73 Reverse Current at DC condition (per leg) IR1 @VR = rated VR TJ = 25 °C 1 Reverse Current (per leg) * IR2 @VR = rated VR TJ = 125 °C 7 Junction Capacitance (per leg) CT @VR = 5V, TC = 25 °C fSIG = 1MHz 200 pF Voltage Rate of Change dv/dt 10,000 V/μs RSM Isolation Voltage (t = 1.0 second, R. H. < =30%, TA = 25 °C) VISO Clip mounting, the epoxy body away from the heatsink edge by more than 0.110” along the lead direction. 4500 Clip mounting, the epoxy body is inside the heatsink. 3500 Screw mounting, the epoxy body is inside the heatsink. 1500 mA V * Pulse Width < 300μs, Duty Cycle <2% ©2015 Littelfuse, Inc Specifications are subject to change without notice. Revised:11/09/15 Schottky Barrier Rectifier MBRF10150CTL, 2x 5A, 150V, ITO-220AB, Common Cathode Thermal-Mechanical Specifications Parameters Symbol Max Unit Junction Temperature TJ -55 to +150 °C -55 to +150 °C 4.5 °C/W 2 g Storage Temperature Tstg Maximum Thermal Resistance Junction to Case (per leg) RthJC Approximate Weight wt Case Style Test Conditions DC operation ITO-220AB Figure 1: Typical Forward Characteristics Figure 2: Typical Reverse Characteristics ºC ºC ºC ºC Figure 3: Typical Junction Capacitance ºC ©2015 Littelfuse, Inc Specifications are subject to change without notice. Revised:11/09/15 Schottky Barrier Rectifier MBRF10150CTL, 2x 5A, 150V, ITO-220AB, Common Cathode Dimensions- ITO-220AB Symbol Millimeters Min Typ Max A 4.30 4.50 4.70 A1 1.10 1.30 1.50 A2 2.80 3.00 3.20 A3 2.50 2.70 2.90 b 0.50 0.60 0.75 b1 1.10 1.20 1.35 b2 1.50 1.60 1.75 b3 1.20 1.30 1.45 b4 1.60 1.70 1.85 c 0.55 0.60 0.75 D 14.80 15.00 15.20 E 9.96 10.16 10.36 2.55 e 5.10 e1 H1 6.50 6.70 6.90 L 12.70 13.20 13.70 2.00 L1 1.60 1.80 L2 0.80 1.00 1.20 L3 0.60 0.80 1.00 øP1 øP2 3.30 3.50 3.70 2.99 3.19 3.39 Q 2.50 2.70 2.90 θ1 θ2 θ3 θ4 θ5 Packing Options 5° 4° 10° 5° 5° Part Numbering and Marking System Part Number Marking Packing Mode M.O.Q MBRF10150CTL MBRF10150CTL 50pcs / Tube 1000 MBRF10150CTL 6 Tube Specification LF YYWWL 7mm MBR F 10 150 CTL LF YY WW L = Device Type = Package type = Forward Current (10A) = Reverse Voltage (150V) = Configuration = Littelfuse = Year = Week = Lot Number 530mm 32mm ©2015 Littelfuse, Inc Specifications are subject to change without notice. Revised:11/09/15