Schottky Barrier Rectifier MBRF30150CT, 2x 15A, 150V, ITO-220AB, Common Cathode MBRF30150CT RoHS Pb Description Littelfuse MBR series Schottky Barrier Rectifier is designed to meet the general requirements of commercial applications by providing high temperature, low leakage and low VF products. It is suitable for high frequency switching mode power supply, free-wheeling diodes and polarity protection diodes. Features • H igh junction temperature capability Pinsink out Heat mon de • H igh frequency operation • Common cathode configuration in electrically isolated ITO220AB package • G uard ring for enhanced ruggedness and long term reliability Common Cathode • Low forward voltage drop 3 node K de 1 2 3 1 Anode Common Anode Cathode 2 Pinout 2 TO-220AB Common Cathode Maximum Ratings 3 e • S witching mode power supply • DC/DC converters • Polarity protection diodes • Free-wheeling diodes Pinout 3 ITO-220AB Common Cathode Parameters Heat sink Cathode Applications 3 Anode Common Anode Cathode Symbol Test Conditions Max Unit Peak Inverse Voltage Cathode VRWM - 150 V Average Forward Current IF(AV) 50% duty cycle @TC = 133°C, rectangular wave form 15 (per leg) 30 (total device) Peak Repetitive Forward Current(per leg) IFRM Rated VR square wave, 20KHz TC = 133°C 20 A IFSM Surge applied at rated load conditions halfwave, single phase,60Hz 150 A Cathode Anode Peak One Cycle Non-Repetitive Surge 1 Current2(per leg) A Pinout 5 TO-220AC Electrical Characteristics Parameters Forward Voltage Drop (per leg) * Reverse Current (per leg) * Symbol Test Conditions Max VF1 @ 15A, Pulse, TJ = 25 °C 1.00 VF2 @ 15A, Pulse, TJ = 125 °C 0.80 IR1 @VR = rated VR TJ = 25 °C 1.0 IR2 @VR = rated VR TJ = 125 °C 6.0 Unit V mA Junction Capacitance (per leg) CT @VR = 5V, TC = 25 °C fSIG = 1MHz 400 pF Series Inductance (per leg) LS Measured lead to lead 5 mm from package body 8.0 nH Voltage Rate of Change dv/dt 10,000 V/μs RSM Isolation Voltage (t = 1.0 second, R. H. < =30%, TA = 25 °C) VISO Clip mounting, the epoxy body away from the heatsink edge by more than 0.110” along the lead direction. 4500 Clip mounting, the epoxy body is inside the heatsink. 3500 Screw mounting, the epoxy body is inside the heatsink. 1500 V * Pulse Width < 300μs, Duty Cycle <2% ©2015 Littelfuse, Inc Specifications are subject to change without notice. Revised:11/09/15 Schottky Barrier Rectifier MBRF30150CT, 2x 15A, 150V, ITO-220AB, Common Cathode Thermal-Mechanical Specifications Parameters Symbol Max Unit Junction Temperature TJ Test Conditions -55 to +150 °C -55 to +150 °C Storage Temperature Tstg Maximum Thermal Resistance Junction to Case RthJC DC operation 2.0 °C/W Maximum Thermal Resistance, Case to Heat Sink RthJA DC operation 60 °C/W Maximum Thermal Resistance, Case to Heat Sink RthCS Mounting surface, smooth and greased 0.5 °C/W Approximate Weight wt 2 g Case Style ITO-220AB Figure 1: Typical Forward Characteristics Figure 2: Typical Reverse Characteristics ºC ºC ºC ºC Figure 3: Typical Junction Capacitance ºC ©2015 Littelfuse, Inc Specifications are subject to change without notice. Revised:11/09/15 Schottky Barrier Rectifier MBRF30150CT, 2x 15A, 150V, ITO-220AB, Common Cathode Dimensions- ITO-220AB Symbol Millimeters Min Typ Max A 4.30 4.50 4.70 A1 1.10 1.30 1.50 A2 2.80 3.00 3.20 A3 2.50 2.70 2.90 b 0.50 0.60 0.75 b1 1.10 1.20 1.35 b2 1.50 1.60 1.75 b3 1.20 1.30 1.45 b4 1.60 1.70 1.85 c 0.55 0.60 0.75 D 14.80 15.00 15.20 E 9.96 10.16 10.36 2.55 e 5.10 e1 H1 6.50 6.70 6.90 L 12.70 13.20 13.70 2.00 L1 1.60 1.80 L2 0.80 1.00 1.20 L3 0.60 0.80 1.00 øP1 øP2 3.30 3.50 3.70 2.99 3.19 3.39 Q 2.50 2.70 2.90 θ1 θ2 θ3 θ4 θ5 Packing Options 5° 4° 10° 5° 5° Part Numbering and Marking System Part Number Marking Packing Mode M.O.Q MBRF30150CT MBRF30150CT 50pcs / Tube 1000 Tube Specification MBRF30150CT 6 7mm LF YYWWL MBR F 30 150 CT LF YY WW L = Device Type = Package type = Forward Current (30A) = Reverse Voltage (150V) = Configuration = Littelfuse = Year = Week = Lot Number 530mm 32mm ©2015 Littelfuse, Inc Specifications are subject to change without notice. Revised:11/09/15