PJ03S/D Series 3W DC/DC CONVERTER, SIP-Package, 4:1 Ultra Wide Input Range FEATURES Efficiency up to 81% Overload Protection Fully Regulated Output Voltage Operating Temperature Range -40°C to +85°C Wide 4:1 Input Range Isolation Voltage 1600 VDC Remote On/Off Control Lead free, RoHs compliant UL/cUL/IEC/EN 60950-1 Safety Approval(pending) 3 Years Product Warranty The PJ03S/D series are miniature, SIP-8 package, isolated 3W DC/DC converters with 1,600VDC isolation. The PJ03S/D series features fully regulated output and wide 4:1 input voltage ranges. It offers over load protection and allows a wide operating temperature range of –40°C to +85°C. These isolated DC/DC converters are the latest offering from a world leader in power systems technology and manufacturing ― Delta Electronics, Inc Model Selection Guide Model Number PJ03S1203A PJ03S1205A PJ03S1212A PJ03S1215A PJ03D1205A PJ03D1212A PJ03D1215A PJ03S2403A PJ03S2405A PJ03S2412A PJ03S2415A PJ03D2405A PJ03D2412A PJ03D2415A PJ03S4803A PJ03S4805A PJ03S4812A PJ03S4815A PJ03D4805A PJ03D4812A PJ03D4815A Input Voltage (Range) Output Voltage VDC VDC 3.3 5 12 15 ±5 ±12 ±15 3.3 5 12 15 ±5 ±12 ±15 3.3 5 12 15 ±5 ±12 ±15 12 (4.5 ~ 18) 24 (9 ~ 36) 48 (18 ~ 75) Output Current Input Current Max. Min. @Max. Load @No Load mA 700 600 250 200 ±300 ±125 ±100 700 600 250 200 ±300 ±125 ±100 700 600 250 200 ±300 ±125 ±100 mA 175 150 63 50 ±75 ±31 ±25 175 150 63 50 ±75 ±31 ±25 175 150 63 50 ±75 ±31 ±25 mA(typ.) 260 320 313 313 313 313 313 128 156 154 154 158 156 154 65 79 79 79 79 79 78 mA(typ.) 60 25 15 Max. capacitive Load Efficiency (typ.) @Max. Load μF 1760 1000 170 110 470* 1008* 47 * 1760 1000 170 110 470 * 100 * 47 * 1760 1000 170 110 470* 100 * 47 * % 74 78 80 80 80 80 80 75 80 81 81 79 80 81 74 79 79 79 79 79 80 * For each output DS_PJ03S/D_03132014 E-mail: [email protected] http://www.deltaww.com/dcdc P1 Input Characteristics Parameter Model 12V Input Models 24V Input Models 48V Input Models 12V Input Models 24V Input Models 48V Input Models 12V Input Models 24V Input Models 48V Input Models Input Surge Voltage (1 sec. max.) Start-Up Threshold Voltage Under Voltage Shutdown Reverse Polarity Input Current Short Circuit Input Power Internal Filter Type Internal Power Dissipation Min. -0.7 -0.7 -0.7 3 4.5 8.5 ----------- All Models Typ. Max. --25 --50 --100 4 4.5 6 9 12 18 3.5 4 --8 --16 --1 --2500 Capacitor type --2600 --- Unit VDC A mW mW Output Characteristics Parameter Output Voltage Setting Accuracy Output Voltage Balance Line Regulation Load Regulation Ripple & Noise (20MHz) Transient Recovery Time Transient Response Deviation Temperature Coefficient Short Circuit Protection Conditions At 50% Load and Nominal Vin Dual Output, Balanced Loads Vin=Min. to Max. Io=25% to 100% 0-20 MHz Bandwidth Min. ----------- --------- 25% Load Step Change Typ. --±0.5 ±0.3 ±0.5 50 300 ±3 --- Max. ±1.0 ±2.0 ±0.5 ±1.0 75 500 ±5 ±0.02 Unit %Vom. % % % mV P-P μsec % %/℃ Continuous General Characteristics Parameter I/O Isolation Voltage (rated) I/O Isolation Resistance I/O Isolation Capacitance Switching Frequency MTBF (calculated) Safety Approvals(pending) Conditions 60 Seconds 500 VDC 100KHz, 1V Min. Typ. Max. Unit 1600 ----VDC 1000 ----MΩ --200 --pF --350 --KHz MIL-HDBK-217F@25℃, Ground Benign 800,000 ----Hours UL/cUL 60950-1 recognition (CSA certificate), IEC/EN 60950-1(CB-scheme) Recommended Input Fuse 12V Input Models 1500mA Slow-Blow Type 24V Input Models 700mA Slow-Blow Type 48V Input Models 350mA Slow-Blow Type Remote On/Off Control Parameter Converter On Converter Off Device Standby Input Current Control Input Current ( on ) Control Input Current ( off ) Control Common Conditions Min. Typ. Max. Under 0.6 VDC or Open Circuit, drops down to 0VDC by 2mV/℃ 2.7 --15 --1 2.5 Vin = 0V ----1 Vin = 5.0V ----1 Referenced to Negative Input Unit VDC mA mA mA Environmental Characteristics Parameter Operating Ambient Temperature Range (See Power Derating Curve) Case Temperature Storage Temperature Range Humidity (non condensing) Cooling Lead Temperature (1.5mm from case for 10Sec.) DS_PJ03S/D_03132014 Conditions Natural Convection Min. Max. -40 +85 --105 -55 +125 --95 Free-Air convection --260 Unit ℃ ℃ ℃ % rel. H ℃ E-mail: [email protected] http://www.deltaww.com/dcdc P2 Power Derating Curve 100 Natural Convection 20LFM Output Power (%) 80 100LFM 200LFM 60 400LFM 40 20 0 ~ -40 0 20 40 60 80 100 110 Ambient Temperature C Notes 1 2 3 4 5 6 7 8 Specifications typical at Ta=+25℃, resistive load, nominal input voltage and rated output current unless otherwise noted. Transient recovery time is measured to within 1% error band for a step change in output load of 75% to 100%. Ripple & Noise measurement bandwidth is 0-20 MHz measured with a 1μF M/C. These power converters require a minimum output loading to maintain specified regulation, operation under no-load conditions will modules; however, they mayhowever, not meet they all specifications not damage these modules; may not meetlisted. all specifications listed. All DC/DC converters should be externally fused at the front end for protection. We recommend to protect the converter by a slow blow fuse in the input supply line. That “natural convection” is about 20LFM but is not equal to still air (0 LFM). Specifications are subject to change without notice. Mechancial Drawing Mechanical Dimensions 0.5 [0.02] 3.2 [0.13] 11.2 [0.44] 21.8 [0.86] Pin Connections Pin Single Output 1 -Vin 2 +Vin Remote 3 On/Off 5 NC 6 +Vout 7 -Vout 8 NC Dual Output -Vin +Vin Remote On/Off NC +Vout Common -Vout 0.5 [0.02] 2.0 [0.08] 2X2.54 5.08 [2X0.10] [0.20] 3X2.54 [3X0.10] NC: No Connection 2 3 5 6 7 8 9.3 [0.37] 1 0.25 [0.01] Bottom View 2.7 [0.11] 20.8 [0.82] 0.50 [0.02] ►All dimensions in mm (inches) X.X±0.5 (X.XX±0.02) X.XX±0.25 ( X.XXX±0.01) ►Pins ±0.1(±0.004) ►Tolerance: Physical Outline Case Size Case Material Pin Material Weight : : : : DS_PJ03S/D_03132014 21.8x9.3x11.2 mm (0.86x0.37x0.44 inches) Non-Conductive Black Plastic (flammability to UL 94V-0 rated) Alloy 42 4.8g E-mail: [email protected] http://www.deltaww.com/dcdc P3 Part Numbering System P J 03 S 48 05 A Form factor Family series Watt Number of Outputs Input Voltage Output Voltage Option Code D-DIP P-SIP S-SMD A~Z 01:1W 02:2W 03:3W 04:4W 06:6W 03:3.3V 05: 5V 12:12V 24: 24V 48:48V 03:3.3V 05: 5V 12:12V 15: 15V 24: 24V A - Std. Functions S - Single D - Dual WARRANTY Delta offers a three(3) years limited warranty. Complete warranty information is listed on our web site or is available upon request from Delta. Information furnished by Delta is believed to be accurate and reliable. However, no responsibility is assumed by Delta for its use, nor for any infringements of patents or other rights of third parties, which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Delta. Delta reserves the right to revise these specifications at any time, without notice. DS_PJ03S/D_03132014 E-mail: [email protected] http://www.deltaww.com/dcdc P4