Model # TML9004 Available as: TML9004, 4 Pin TO‐8 (T4) TNL9004, 4 Pin Surface Mount (SM3) BXL9004, Connectorized Housing (H1) RF/Microwave Limiting Amplifier Frequency Range: 50 to 500 MHz Absolute Maximum (No Damage) Ratings Features • Frequency: 50 to 500 MHz • Power Output (1 dB Comp.) +12 dBm • Operating Temperature ‐55oC to +85oC • Environmental Screening Available Technical Specifications TYPICAL Ta = +25oC MIN/MAX Ta = +25oC Frequency 50 – 500 MHz 50 – 500 MHz Gain (dB) 12 10 Min. Saturated Output Power (dBm) 12 +9.5 Min. Characteristic Saturated Flatness ± 0.5 ± 1.0 Max. VSWR In 1.2:1 2.0:1 Max. Out 1.4:1 2.0:1 Max. Noise Figure (dB) 7.0 9.0 Max. Power Vdc +12 +12 mA 30 50 Max. Typical Performance Data Operating Temperature ‐55 oC to +100 oC Storage Temperature ‐62 oC to + 125 oC Case Temperature + 125 oC DC Voltage +15 volts Continuous RF Input Power + 15 dBm Note: 1. Care should always be taken to effectively ground the case of each unit. 2. Min/Max specs are guaranteed when tested in a 50 Ohm system. 3. Package drawing for reference only. Output Flatness Over Frequency 15 Output Power (dBm) ‐20 10 ‐15 5 ‐10 ‐5 0 0 ‐5 5 10 ‐10 0 100 200 300 400 500 15 FREQUENCY (MHz) Power Out vs Power In (dBm)* Output Power (dBm) 13 11 9 Blue line = 50 MHz Red line = 500 MHz 7 5 3 ‐10 ‐5 0 5 10 15 Input Power (dBm) Rev Date: 7/23/2014 Page # 1 © API Technologies Corp. Proprietary Information | www.apitech.com | micro.apitech.com | +1.888.553.7531 | [email protected]