DOMINANT Opto Technologies Innovating Illumination DomiLED TM DATA SHEET: DomiLEDTM InGaN : DDx-HJS TM Synonymous with function and performance, the DomiLED series is perfectly suited for a variety of cross-industrial applications due to its small package outline, durability and superior brightness. TM Features: > > > > > > > > High brightness surface mount LED. 120° viewing angle. Small package outline (LxWxH) of 3.2 x 2.8 x 1.8mm. Qualified according to JEDEC moisture sensitivity Level 2. Compatible to IR reflow soldering. Environmental friendly; RoHS compliance. Compliance to automotive standard, AEC-Q101. Superior corrosion resistant. Applications: > Automotive: interior applications, eg: switches, telematics, climate control system, dashboard, etc. > Consumer Appliances: LCD illumination as in PDAs, LCD TV. > Communication: indicator and backlight in mobilephone. > Signage: full color display video notice board. > Industrial: white goods (eg: Oven, microwave, etc.). © 2005 DomiLED is a trademark of DOMINANT Opto Technologies. All rights reserved. Product specifications are subject to change without notice. 1 26/11/2015 V7.0 DOMINANT TM Opto Technologies InGaN : DDx-HJS Innovating Illumination Optical Characteristics at Tj=25˚C Part Ordering Number Color Luminous Intensity @ 20mA IV (mcd) Min. Typ. Max. DDT-HJS-VW1-1 True Green 120 715.0 1125.0 1400.0 DDT-HJS-V2W-1 True Green 120 900.0 1400.0 1800.0 DDB-HJS-TU1-1 Blue 120 285.0 425.0 560.0 DDB-HJS-S2T-1 Blue 120 224.0 355.0 450.0 Viewing Angle˚ Not for new design NOTE 1. All part number above comes in a quantity of 2000 units per reel. 2. Luminous intensity is measured with an accuracy of ± 11%. 3. Color binning is carried for all units as per the color-binning table. Only once color groyp is allowed for each reel. Electrical Characteristics at Tj=25˚C Part Number DDx-HJS Vf @ If = 20mA Typ. (V) Min. (V) Max. (V) 2.9 3.2 Vr @ Ir = 10uA Min. (V) 3.6 5 Forward voltage are measured using a current pulse of 1 ms and with an accuracy of ± 0.1 V. Absolute Maximum Ratings Maximum Value Unit DC forward current 20 mA Peak pulse current; (tp ≤ 10µs, Duty cycle = 0.005) 100 mA 5 V ESD threshold (HBM) 2000 V LED junction temperature 125 ˚C Operating temperature -40 … +100 ˚C Storage temperature -40 … +100 ˚C 80 mW 340 K/W 180 K/W Reverse voltage; Ir (max) = 10uA Power dissipation (at room temperature) Thermal resistance - Junction / ambient, Rth JA - Junction / solder point, Rth JS (Mounting on FR4 PCB, pad size >= 16 mm2 per pad) 2 26/11/2015 V7.0 DOMINANT TM Opto Technologies InGaN : DDx-HJS Innovating Illumination Characteristics Symbol Temperature coefficient of TC dom (typ) IF = 20mA; 0 ˚C <= T <= 100 ˚C Temperature coefficient of VF (typ) dom (typ) TCV IF = 20mA; 0 ˚C <= T <= 100 ˚C Temperature coefficient of IV (typ) IF = 20mA; 0 ˚C <= T <= 100 ˚C TCIV Part Number Value Unit DDB-HJS 0.03 nm / K DDT-HJS 0.03 DDB-HJS -2.97 DDT-HJS -2.37 DDB-HJS -0.12 DDT-HJS -0.11 mV / K %/K Wavelength Grouping at Tj=25˚C Color DDT; True Green DDB; Blue Group Wavelength distribution(nm) Full 520.0 - 535.0 A 520.0 - 525.0 B 525.0 - 530.0 C 530.0 - 535.0 Full 464.0 - 476.0 A 464.0 - 470.0 B 470.0 - 476.0 Dominant wavelength is measured with an accuracy of ± 1 nm. Luminous Intensity Group at Tj=25˚C Luminous Intensity IV (mcd) Brightness Group S2 224.0 ... 285.0 T1 285.0 ... 355.0 T2 355.0 ... 450.0 U1 450.0 ... 560.0 V1 715.0 ... 900.0 V2 900.0 ... 1125.0 W1 1125.0 ... 1400.0 W2 1400.0 ... 1800.0 3 26/11/2015 V7.0 DOMINANT TM InGaN : DDx-HJS Opto Technologies Innovating Illumination Forward Current Vs Forward Forward Current Vs Forward Voltage Voltage 2.22.4 50 50 40 40 30 30 20 20 10 10 0 0 1.8 2 1.6 1.41.6 1.2 1.2 1 0.8 0.8 0.6 0.4 0.4 Forward Current; mA 2 Forward Current, mA Relative Intensity RelativeIntensity; Intensity;Normalized Normalized at Relative at 20mA 20mA Relative Intensity Vs Forward Current Relative Luminous Intensity Vs Forward Current 0.2 00 00 10 10 20 20 30 40 30 50 40 2 2 50 3.5 4 4 Dominant Shift Vs Forward Current Relative Wavelength Intensity Vs. Wavelength Maximum Vs Ambient Ambient Temperature Temperature Maximum Current Current Vs 2525 20 1 12 0.9 10 0.8 20 Relative Intensity Forward Current; mA Forward Current, If 33.5 Forward V Forward Voltage,Voltage; V Forward Current; mA mA Forward Current, 15 15 10 10 5 0.5 4 0.4 2 0.3 0 50 60 70 80 90 100 50 60 70 80 90 100 True Green 6 0.6 0.1 05 8 0.7 0.2 0 0 1010 20 30 40 20 30 40 2.5 3 2.5 0 Blue -2 -4 400 0 450 5550 600 10 650 15700 750 20 800 25 500 30 Forwardnm Current, mA Wavelength, Ambient Ambient Temperature temperature Relative Intensity Vs Wavelength Radiation Pattern 30° 1 20° 10° 0° 1.0 0.9 True Green 0.8 0.7 40° 0.8 Blue 0.6 0.5 50° 0.6 60° 0.4 0.4 0.3 0.2 70° 0.1 0.2 80° 0 400 450 500 550 600 650 700 750 800 90° 0 Wavelength, nm 4 26/11/2015 V7.0 RE: Info on DDT-HJS-V2W-1 --- Additional info requested... Min. Current requirement??? --- Subject: DOMINANT TM WL, InGaN : DDx-HJS Opto Technologies Please add the graph below into DDT-HJS datasheet. Innovating Illumination Allowable Forward Current (mA) Allowable Forward Current Vs Duty Ratio (Tj=25 Deg C, tp<10uS) Duty Ratio % Response : 1) A Graph showing the maximum Current rating vs. Duty Cycle. I do not see a graph in the datasheet. Can you provide this information? Î As graph attached 2) The minimum amount of current that is required to turn-on the LED ? Î >1mA in order to ensure brightness homogeneity Best Regards Tan From: Sam Ying Pok [mailto:[email protected]] Sent: Friday, June 15, 2012 6:44 PM To: [email protected] Subject: FW: Info on DDT-HJS-V2W-1 --- Additional info requested... Min. Current requirement??? --- HiTan, Pleaseadvice.Thanks. 1 5 26/11/2015 V7.0 DOMINANT TM InGaN : DDx-HJS Opto Technologies Innovating Illumination DomiLED • InGaN : DDx-HJS Package Outlines TM Note : Primary thermal path is through Cathode lead of LED package Material Material Lead-frame Cu Alloy With Ag Plating Package High Temperature Resistant Plastic, PPA Encapsulant Epoxy Soldering Leads Sn Plating 6 26/11/2015 V7.0 DOMINANT TM InGaN : DDx-HJS Opto Technologies Innovating Illumination Recommended Solder Pad 7 26/11/2015 V7.0 DOMINANT TM InGaN : DDx-HJS Opto Technologies Innovating Illumination Taping and orientation • Reels come in quantity of 2000 units. • Reel diameter is 180 mm. 8 26/11/2015 V7.0 DOMINANT TM InGaN : DDx-HJS Opto Technologies Innovating Illumination Packaging Specification 9 26/11/2015 V7.0 DOMINANT TM InGaN : DDx-HJS Opto Technologies Innovating Illumination Packaging Specification Existing BPL Moisture sensitivity level size - 87mm x 45mm. As part of improvement and also in response to customers’ request; BPL f Barcode label changed to the following. DOMINANT Opto Technologies (L) Lot No : lotno ML TEMP 2 260˚C RoHS Compliant (P) Part No : partno (C) Cust No : partno (Q) Quantity : quantity (G) Grouping : group (D) D/C : date code Made in Malaysia (S) S/N : serial no New BPL size - 110mm x 55mm. Additional information are now included in the label. 2D and 3D barc Reel implemented now for every data field. Label Moisture absorbent material + Moisture indicator Issue No : 1 The reel, moisture absorbent material and moisture indicator are sealed inside the moisture proof foil bag Weight Weight(gram) (gram) Average 1pc DomiLED/Multi DomiLED 1 completed bag (2000pcs) 0.034 0.034 240 ± 10 190 10 Cardboard Box DOMINANT TM For DomiLED TM Cardboard Box Size Dimensions (mm) Empty Box Weight (kg) Reel / Box Super Small 325 x 225 x 190 0.38 9 reels MAX Small 325 x 225 x 280 0.54 15 reels MAX Medium 570 x 440 x 230 1.46 60 reels MAX Large 570 x 440 x 460 1.92 120 reels MAX 10 26/11/2015 V7.0 DOMINANT TM InGaN : DDx-HJS Opto Technologies Innovating Illumination Recommended Pb-free Soldering Profile Classification Reflow Profile (JEDEC J-STD-020C) 300 255-260˚C 10-30s 275 250 217˚C 225 Temperature (˚C) Ramp-up 3˚C/sec max. 200 60-150s 175 150 125 Rampdown 6˚C/sec max. 100 75 Preheat 60-180s 50 25 480s max 0 50 100 150 200 Time (sec) 11 26/11/2015 V7.0 DOMINANT TM InGaN : DDx-HJS Opto Technologies Innovating Illumination Revision History Page Subjects Date of Modification - Initial Release 06 Apr 2009 2 Add Thermal Resistance 14 Apr 2010 2 Add partno: DDT-HJS-VW1-1 16 Dec 2010 2 Add partno: DDB-HJS-TU1-1 Not for new design: DDB-HJS-S2T-1 12 Sep 2011 4 Update Graph: Relative Luminous Intensity Vs Forward Current 29 Dec 2011 5 Add graph: Allowable Forward Current Vs Duty Ratio 18 Jun 2012 Add Features Add Characteristics Add Remarks in Package Outline Update Package Specification 26 Nov 2015 1, 3, 6, 10 NOTE All the information contained in this document is considered to be reliable at the time of publishing. However, DOMINANT Opto Technologies does not assume any liability arising out of the application or use of any product described herein. DOMINANT Opto Technologies reserves the right to make changes to any products in order to improve reliability, function or design. DOMINANT Opto Technologies products are not authorized for use as critical components in life support devices or systems without the express written approval from the Managing Director of DOMINANT Opto Technologies 12 26/11/2015 V7.0 DOMINANT TM Opto Technologies InGaN : DDx-HJS Innovating Illumination About Us DOMINANT Opto Technologies is a dynamic Malaysian Corporation that is among the world’s leading SMT LED Manufacturers. An excellence – driven organization, it offers a comprehensive product range for diverse industries and applications. Featuring an internationally certified quality assurance acclaim, DOMINANT’s extra bright LEDs are perfectly suited for various lighting applications in the automotive, consumer and communications as well as industrial sectors. With extensive industry experience and relentless pursuit of innovation, DOMINANT’s state-of-art manufacturing, research and testing capabilities have become a trusted and reliable brand across the globe. More information about DOMINANT Opto Technologies can be found on the Internet at http://www.dominant-semi.com. Please contact us for more information: DOMINANT Opto Technologies Sdn. Bhd. Lot 6, Batu Berendam, FTZ Phase III, 75350 Melaka, Malaysia Tel: (606) 283 3566 Fax: (606) 283 0566 E-mail: [email protected] DOMINANT Opto Technologies Innovating Illumination TM