DOMINANT Opto Technologies Innovating Illumination DomiLED TM DATA SHEET: DomiLEDTM InGaN White : DDW-LJG-F1P5 TM With the intense colors that seem to glow with energy and its significant brightness, DomiLED white LED is a highly reliable design device. Its dynamic nature makes it perfect choice for lighthing applications, office and home applications and standard industrial applications. TM Features: > > > > > > > > > High brightness surface mount LED. Based on InGaN technology. 120° viewing angle. Small package outline (LxWxH) of 3.2 x 2.8 x 1.8mm. Qualified according to JEDEC moisture sensitivity Level 2. Compatible to IR reflow soldering. Environmental friendly; RoHS compliance. Superior Corrosion Resistant Compliance to automotive standard; AEC-Q101. Applications: > Automotive: interior applications, eg: switches, telematics, climate control system, dashboard, etc. > Consumer appliances: LCD illumination as in PDAs, LCD TV. > Communication: mobile phone flash light, backlights in mobile phone display. > Display: full color display video notice board. > Industrial: general lighting © 2005 DomiLED is a trademark of DOMINANT Opto Technologies. All rights reserved. Product specifications are subject to change without notice. 1 20/10/2015 V1.0 DOMINANT TM DDW-LJG-F1P5 Opto Technologies Innovating Illumination Optical Characteristics at Tj=250C Part Ordering Number DDW-LJG-W2X-F1P5 Color Viewing Angle˚ White 120 Luminous Intensity @ IF = 20mA IV (mcd) Min. Typ. Max. 1400.0 2240.0 Luminous Flux Typ. 2850.0 6534.0 NOTE 1. All part number above comes in a quantity of 2000 units per reel. 2. Luminous intensity is measured with an accuracy of ± 11%. 3. Color binning is carried for all units as per the color binning table. Only one color group is allowed for each reel. 4. InGaN wavelength is very sensitive to drive current. Operating at lower current is not recommended and may yield unpredictable performace Current pushing should is used for dimming purposes. Electrical Characteristics at Tj=250C Part Number Vf @ If = 20 mA Min. (V) Typ. (V) Max. (V) Vr @ Ir = 10 µA Min. (V) 2.8 3.2 3.6 5.0 DDW-LJG Forward Voltage, Vf is measured with an accuracy of ± 0.1 V. Absolute Maximum Ratings Maximum Value Unit DC forward current 30 mA Peak pulse current; (tp ≤ 10µs, Duty cycle = 0.10) 100 mA 5 V ESD threshold (HBM) 2000 V LED junction temperature 125 ˚C Operating temperature -40 … +100 ˚C Storage temperature -40 … +100 ˚C 110 mW 340 K/W 180 K/W Reverse voltage; Ir max = 10µA Power dissipation (at room temperature) Thermal resistance - Junction / ambient, Rth JA - Junction / solder point, Rth JS (Mounting on FR4 PCB, pad size >= 16 mm2 per pad) 2 20/10/2015 V1.0 DOMINANT TM DDW-LJG-F1P5 Opto Technologies Innovating Illumination Characteristics Temperature coefficient of VF (typ) IF = 20mA; 0 ˚C <= T <= 85˚C Temperature coefficient of IV (typ) IF = 20mA; 0 ˚C <= T <= 85 ˚C Temperature coefficient of Cx (typ) IF = 20mA; 0 ˚C <= T <= 85 ˚C Temperature coefficient of Cy (typ) IF = 20mA; 0 ˚C <= T <= 85 ˚C Symbol Part Number Value Unit TCV DDW-LJG -5.40 mV / K TCIV DDW-LJG -0.21 %/K TCCx DDW-LJG -0.0001 TCCy DDW-LJG -0.0001 3 20/10/2015 V1.0 DOMINANT TM DDW-LJG-F1P5 Opto Technologies Innovating Illumination DDW, White Color Grouping White Bin Structure 0.47 0.46 0.45 0.44 P 0.43 0.42 N 0.41 0.40 M 0.39 0.38 L 0.37 0.36 0.35 K 0.34 0.33 J 0.32 0.31 I 0.30 0.29 H 0.28 0.27 G 0.26 0.25 F 0.24 0.23 5 0.22 4 0.21 3 0.20 2 1 0.19 0.18 0.18 0.19 0.20 0.21 0.22 0.23 0.24 0.25 0.26 0.27 0.28 0.29 0.30 0.31 0.32 0.33 0.34 0.35 0.36 0.37 0.38 0.39 Chromaticity coordinate groups are measured with an accuracy of ± 0.01. 1 2 3 4 Cx 0.2498 0.2589 0.2682 0.2597 Cy 0.2053 0.2000 0.2146 0.2204 Cx 0.2402 0.2498 0.2597 0.2509 Cy 0.2108 0.2053 0.2204 0.2264 Cx 0.2269 0.2388 0.2509 0.2402 Cy 0.2185 0.2348 0.2264 0.2108 Cx 0.2136 0.2267 0.2388 0.2269 Cy 0.2262 0.2432 0.2348 0.2185 Cx 0.2003 0.2146 0.2267 0.2136 Cy 0.2339 0.2516 0.2432 0.2262 Cx 0.2597 0.2682 0.2775 0.2700 Cy 0.2204 0.2146 0.2292 0.2361 Cx 0.2509 0.2597 0.2700 0.2624 Cy 0.2264 0.2204 0.2361 0.2431 Cx 0.2388 0.2509 0.2624 0.2520 Cy 0.2348 0.2264 0.2431 0.2527 Cx 0.2267 0.2416 0.2520 0.2388 Cy 0.2432 0.2623 0.2527 0.2348 Cx 0.2146 0.2312 0.2416 0.2267 Cy 0.2516 0.2719 0.2623 0.2432 Bin F1 F2 F3 F4 F5 G1 G2 G3 G4 G5 4 20/10/2015 V1.0 DOMINANT TM DDW-LJG-F1P5 Opto Technologies Innovating Illumination 1 2 3 4 Cx 0.2700 0.2775 0.2861 0.2797 Cy 0.2361 0.2292 0.2427 0.2509 Cx 0.2624 0.2700 0.2797 0.2733 Cy 0.2431 0.2361 0.2509 0.2590 Cx 0.2520 0.2624 0.2733 0.2646 Cy 0.2527 0.2431 0.2590 0.2700 Cx 0.2416 0.2559 0.2646 0.2520 Cy 0.2623 0.2810 0.2700 0.2527 Cx 0.2312 0.2472 0.2559 0.2416 Cy 0.2719 0.2920 0.2810 0.2623 Cx 0.2797 0.2861 0.2950 0.2898 Cy 0.2509 0.2427 0.2568 0.2664 Cx 0.2733 0.2797 0.2898 0.2848 Cy 0.2590 0.2509 0.2664 0.2757 Cx 0.2646 0.2733 0.2848 0.2780 Cy 0.2700 0.2590 0.2757 0.2883 Cx 0.2559 0.2712 0.2780 0.2646 Cy 0.2810 0.3009 0.2883 0.2700 Cx 0.2472 0.2644 0.2712 0.2559 Cy 0.2920 0.3135 0.3009 0.2810 Cx 0.2898 0.2950 0.3045 0.3007 Cy 0.2664 0.2568 0.2717 0.2830 Cx 0.2848 0.2898 0.3007 0.2971 Cy 0.2757 0.2664 0.2830 0.2935 Cx 0.2780 0.2848 0.2971 0.2922 Cy 0.2883 0.2757 0.2935 0.3077 Cx 0.2712 0.2873 0.2922 0.2780 Cy 0.3009 0.3219 0.3077 0.2883 Cx 0.2644 0.2824 0.2873 0.2712 Cy 0.3135 0.3361 0.3219 0.3009 Cx 0.3007 0.3045 0.3138 0.3113 Cy 0.2830 0.2717 0.2862 0.2992 Cx 0.2971 0.3007 0.3113 0.3090 Cy 0.2935 0.2830 0.2992 0.3108 Cx 0.2922 0.2971 0.3090 0.3060 Cy 0.3077 0.2935 0.3108 0.3266 Cx 0.2873 0.3030 0.3060 0.2922 Cy 0.3219 0.3424 0.3266 0.3077 Cx 0.2824 0.3000 0.3030 0.2873 Cy 0.3361 0.3582 0.3424 0.3219 Cx 0.3113 0.3138 0.3231 0.3219 Cy 0.2992 0.2862 0.3008 0.3154 Cx 0.3090 0.3113 0.3219 0.3209 Cy 0.3108 0.2992 0.3154 0.3281 Cx 0.3060 0.3090 0.3209 0.3196 Cy 0.3266 0.3108 0.3281 0.3451 Cx 0.3030 0.3183 0.3196 0.3060 Cy 0.3424 0.3621 0.3451 0.3266 Cx 0.3000 0.3170 0.3183 0.3030 Cy 0.3582 0.3791 0.3621 0.3424 Bin H1 H2 H3 H4 H5 I1 I2 I3 I4 I5 J1 J2 J3 J4 J5 K1 K2 K3 K4 K5 L1 L2 L3 L4 L5 5 20/10/2015 V1.0 DOMINANT TM DDW-LJG-F1P5 Opto Technologies Innovating Illumination 1 2 3 4 Cx 0.3219 0.3231 0.3335 0.3339 Cy 0.3154 0.3008 0.3172 0.3336 Cx 0.3209 0.3219 0.3339 0.3341 Cy 0.3281 0.3154 0.3336 0.3472 Cx 0.3196 0.3209 0.3341 0.3345 Cy 0.3451 0.3281 0.3472 0.3654 Cx 0.3183 0.3349 0.3345 0.3196 Cy 0.3621 0.3830 0.3654 0.3451 Cx 0.3170 0.3353 0.3349 0.3183 Cy 0.3791 0.4006 0.3830 0.3621 Cx 0.3335 0.3339 0.3465 0.3447 Cy 0.3172 0.3336 0.3530 0.3347 Cx 0.3339 0.3341 0.3479 0.3465 Cy 0.3336 0.3472 0.3673 0.3530 Cx 0.3341 0.3345 0.3498 0.3479 Cy 0.3472 0.3654 0.3863 0.3673 Cx 0.3349 0.3517 0.3498 0.3345 Cy 0.3830 0.4053 0.3863 0.3654 Cx 0.3353 0.3536 0.3517 0.3349 Cy 0.4006 0.4243 0.4053 0.3830 Cx 0.3447 0.3465 0.3599 0.3567 Cy 0.3347 0.3530 0.3735 0.3535 Cx 0.3465 0.3479 0.3623 0.3599 Cy 0.3530 0.3673 0.3882 0.3735 Cx 0.3479 0.3498 0.3655 0.3623 Cy 0.3673 0.3863 0.4079 0.3882 Cx 0.3517 0.3687 0.3655 0.3498 Cy 0.4053 0.4276 0.4079 0.3863 Cx 0.3536 0.3719 0.3687 0.3517 Cy 0.4243 0.4473 0.4276 0.4053 Bin M1 M2 M3 M4 M5 N1 N2 N3 N4 N5 P1 P2 P3 P4 P5 InGaN wavelength is very sensitive to drive current. Operating at lower current is not recommended and may yield unpredictable performance. Current pulsing should be used for dimming purposes. 6 20/10/2015 V1.0 DOMINANT TM DDW-LJG-F1P5 Opto Technologies Innovating Illumination Luminous Intensity Group at Tj=25˚C Luminous Intensity IV (mcd) Brightness Group W2 1400.0 ... 1800.0 X1 1800.0 ... 2240.0 X2 2240.0 ... 2850.0 Luminous intensity is measured with an accuracy of ± 11%. Vf Binning (Optional) Vf Bin @ 20mA Group Forward Wavelength Voltage (V) distribution (nm) V1 2.75 ... 3.05 V2 3.05 ... 3.35 V3 3.35 ... 3.65 Forward voltage, Vf is measured with an accuracy of ± 0.1 V. Please consult sales and marketing for special part number to incorporate Vf binning. 7 20/10/2015 V1.0 DOMINANT TM DDW-LJG-F1P5 Opto Technologies Innovating Illumination Relative Luminous Intensity Vs Forward Current Multiple X-Y Plot Relative Intensity; Normalized at 20mA IF (mA) Vf (V) 2.2 2.2 Flux (lm) Cx Cy 1.4 1.4 1.2 1.2 1 0.8 0.8 0.6 0.6 0.4 0.4 0.2 0.2 00 50 Chromaticity Coordinate Shift 0.0150 ¨Cx , ¨Cy Forward Current; mA Luminous Flux; Normalized at 80mA 1.6 1.6 Take this. Result better, as per lim on 13/07/15 UCy Col_2 2.0 1.8 1.8 Second Graph Forward Current Vs Forward Voltage UCx Variables Luminous Flux Vs Forward Current 2 Flux Normalized @ 80mA 1.5 1.0 40 0.0100 30 ¨Cy 0.0050 20 0.0000 ¨Cx 0 10 20 30 60 70 80 90 100 110 120 130 140 150 0 0 0 10 10 20 20 30 30 40 40 -0.0100 50 50 30Col_1 60 Forward Current, mA90 0 120 150 180 2 2.5 3.5 4 Forward Current (mA) Forward Current Vs Ambient Temperature Relative Intensity Vs Wavelength Relative Intensity Vs Wavelength Forward Voltage Vs Forward Current 11 3.3 35 3 Forward Voltage; V -0.0150 IF, mA 0.9 0.9 30 0.8 0.8 20 15 10 Relative Intensity Relative Intensity 3.1 25 Forw ward Voltage (V) Forward Current; mA 50 -0.0050 0.5 0.0 2.9 2.7 0.7 0.7 0.6 0.6 0.5 0.5 0.4 04 0.4 0.3 0.3 0.2 0.2 5 0.1 0.1 0 0 2.5 0 10 0 20 30 30 40 50 60 60 70 90 80 120 150 90 100 0 180 400 350 Ambient Temperature Multiple X-Y Plot 0.02 0.01 0.01 0 0 -0.01 -0.01 Cy Cx -0.02 -0.02 -0.03 -0.03 0 0 5 2 4 10 6 15 8 10 20 12 14 25 Forward current (mA) 550 650 600 750 650 850 700 950 750 1050 Allowable Forward Current Vs Duty Ratio Allowable Forward Current Vs Duty Ratio ( Ta=25 Deg tp≤10uS ) ( Ta=25 Deg C, C, tp10uS ) 16 18 30 20 1000 AllowableForward Forward Current ( mA () mA ) Allowable Current Variables Variables Cx Cx Cy Cy 0.03 0.02 500 550 Wavelength; nm Chromaticity Coordinate Shift ( Tj=25° C ) 0.03 450 450 Wavelength (nm) Forward Current (mA) ΔCX , Δ CY 40 10 Col_1 8 DDW-LJG 100 10 0.1 1 10 Duty Ratio, % Duty Ratio, % 100 20/10/2015 V1.0 DOMINANT TM DDW-LJG-F1P5 Opto Technologies Innovating Illumination Radiation Pattern 30° 20° 10° 0° 1.0 40° 0.8 50° 0.6 60° 0.4 70° 0.2 80° 90° 0 9 20/10/2015 V1.0 DOMINANT TM DDW-LJG-F1P5 Opto Technologies Innovating Illumination DomiLED • InGaN White: DDW-LJG-F1P5 Package Outlines TM Note : Primary thermal path is through Cathode lead of LED package Material Material Lead-frame Cu Alloy With Ag Plating Package High Temperature Resistant Plastic, PPA Encapsulant Silicone Resin Soldering Leads Sn-Sn Plating 10 20/10/2015 V1.0 DOMINANT TM DDW-LJG-F1P5 Opto Technologies Innovating Illumination Recommended Solder Pad 11 20/10/2015 V1.0 DOMINANT TM DDW-LJG-F1P5 Opto Technologies Innovating Illumination Taping and orientation • Reels come in quantity of 2000 units. • Reel diameter is 180 mm. 12 20/10/2015 V1.0 DOMINANT TM DDW-LJG-F1P5 Opto Technologies Innovating Illumination Packaging Specification 13 20/10/2015 V1.0 DOMINANT TM DDW-LJG-F1P5 Opto Technologies Innovating Illumination Packaging Specification Existing BPL Moisture sensitivity level size - 87mm x 45mm. As part of improvement and also in response to customers’ request; BPL f Barcode label changed to the following. DOMINANT Opto Technologies (L) Lot No : lotno ML TEMP 2 260˚C RoHS Compliant (P) Part No : partno (C) Cust No : partno (Q) Quantity : quantity (G) Grouping : group (D) D/C : date code Made in Malaysia (S) S/N : serial no New BPL size - 110mm x 55mm. Additional information are now included in the label. 2D and 3D barc Reel implemented now for every data field. Label Moisture absorbent material + Moisture indicator Issue No : 1 The reel, moisture absorbent material and moisture indicator are sealed inside the moisture proof foil bag Weight Weight(gram) (gram) Average 1pc DomiLED/Multi DomiLED 1 completed bag (2000pcs) 0.034 0.034 240 ± 10 190 10 Cardboard Box DOMINANT TM For DomiLED TM Cardboard Box Size Dimensions (mm) Empty Box Weight (kg) Reel / Box Super Small 325 x 225 x 190 0.38 9 reels MAX Small 325 x 225 x 280 0.54 15 reels MAX Medium 570 x 440 x 230 1.46 60 reels MAX Large 570 x 440 x 460 1.92 120 reels MAX 14 20/10/2015 V1.0 DOMINANT TM DDW-LJG-F1P5 Opto Technologies Innovating Illumination Recommended Pb-free Soldering Profile Classification Reflow Profile (JEDEC J-STD-020C) 300 255-260˚C 10-30s 275 250 217˚C 225 Temperature (˚C) Ramp-up 3˚C/sec max. 200 60-150s 175 150 125 Rampdown 6˚C/sec max. 100 75 Preheat 60-180s 50 25 480s max 0 50 100 150 200 Time (sec) 15 20/10/2015 V1.0 DOMINANT TM DDW-LJG-F1P5 Opto Technologies Innovating Illumination Revision History Page Subjects Date of Modification - Initial Release 20 Oct 2015 NOTE All the information contained in this document is considered to be reliable at the time of publishing. However, DOMINANT Opto Technologies does not assume any liability arising out of the application or use of any product described herein. DOMINANT Opto Technologies reserves the right to make changes at to any products in order to improve reliability, function or design. DOMINANT Opto Technologies products are not authorized for use as critical components in life support devices or systems without the express written approval from the Managing Director of DOMINANT Opto Technologies. 16 20/10/2015 V1.0 DOMINANT TM Opto Technologies Innovating Illumination DDW-LJG-F1P5 About Us DOMINANT Opto Technologies is a dynamic Malaysian Corporation that is among the world’s leading SMT LED Manufacturers. An excellence – driven organization, it offers a comprehensive product range for diverse industries and applications. Featuring an internationally certified quality assurance acclaim, DOMINANT’s extra bright LEDs are perfectly suited for various lighting applications in the automotive, consumer and communications as well as industrial sectors. With extensive industry experience and relentless pursuit of innovation, DOMINANT’s state-of-art manufacturing, research and testing capabilities have become a trusted and reliable brand across the globe. More information about DOMINANT Opto Technologies can be found on the Internet at http://www.dominant-semi.com. Please contact us for more information: DOMINANT Opto Technologies Sdn. Bhd Lot 6, Batu Berendam, FTZ Phase III, 75350 Melaka, Malaysia. Tel: +606 283 3566 Fax: +606 283 0566 E-mail: [email protected] DOMINANT Opto Technologies Innovating Illumination TM