DOMINANT Opto Technologies Innovating Illumination DomiLED TM DATA SHEET: DomiLEDTM InGaN White : DDW-UJG TM With the intense colors that seem to glow with energy and its significant brightness, DomiLED white LED is a highly reliable design device. Its dynamic nature makes it perfect choice for lighthing applications, office and home applications and standard industrial applications. TM Features: > High brightness surface mount LED. > Based on InGaN technology. > > > > > > 120° viewing angle. Small package outline (LxWxH) of 3.2 x 2.8 x 1.8mm. Qualified according to JEDEC moisture sensitivity Level 2. Compatible to both IR reflow soldering. Environmental friendly; RoHS compliance. Compliance to automotive standard; AEC-Q101. Applications: > Automotive: interior applications, eg: switches, telematics, climate control system, dashboard, etc. > Consumer Appliances: LCD illumination as in PDAs, LCD TV. > Communication: mobile phone flash light, backlights in mobile phone display. > Display: full color display video notice board. > Industry: general lighting © 2005 DomiLED is a trademark of DOMINANT Opto Technologies. All rights reserved. Product specifications are subject to change without notice. 1 16/10/2015 V5.0 DOMINANT TM Opto Technologies InGaN White : DDW-UJG Innovating Illumination Optical Characteristics at Tj=250C Part Ordering Number Color Viewing Angle˚ Luminous Intensity @ IF = 20mA IV (mcd) Min. Typ. Max. DDW-UJG-T2U-1 White 120 355.0 535.0 715.0 DDW-UJG-T2U-5K8L White 120 355.0 535.0 715.0 NOTE 1. All part number above comes in a quantity of 2000 units per reel. 2. Luminous intensity is measured with an accuracy of ± 11%. 3. Color binning is carried for all units as per the color binning table. Only one color group is allowed for each reel. 4. InGaN wavelength is very sensitive to drive current. Operating at lower current is not recommended and may yield unpredictable performace Current pushing should is used for dimming purposes. Electrical Characteristics at Tj=250C Part Number Vf @ If = 20 mA Min. (V) Typ. (V) Max. (V) Vr @ Ir = 10 µA Min. (V) 2.9 3.2 3.8 5.0 DDW-UJG Forward Voltage, Vf is measured with an accuracy of ± 0.1 V. Absolute Maximum Ratings Maximum Value Unit DC forward current 20 mA Peak pulse current; (tp ≤ 10µs, Duty cycle = 0.10) 100 mA 5 V ESD threshold (HBM) 2000 V LED junction temperature 125 ˚C Operating temperature -40 … +100 ˚C Storage temperature -40 … +100 ˚C 85 mW 340 K/W 180 K/W Reverse Voltage; Ir max = 10µA Power dissipation (at room temperature) Thermal resistance - Junction / ambient, Rth JA - Junction / solder point, Rth JS (Mounting on FR4 PCB, pad size >= 16 mm2 per pad) 2 16/10/2015 V5.0 DOMINANT TM Opto Technologies InGaN White : DDW-UJG Innovating Illumination Characteristics Symbol Part Number Value Unit TCV DDW-UJG -2.90 mV / K TCIV DDW-UJG -0.21 %/K Temperature coefficient of Cx (typ) IF = 20mA; 0 ˚C <= T <= 85 ˚C TCCx DDW-UJG -0.00020 Temperature coefficient of Cy (typ) IF = 20mA; 0 ˚C <= T <= 85 ˚C TCCy DDW-UJG -0.00005 Temperature coefficient of VF (typ) IF = 20mA; 0 ˚C <= T <= 85˚C Temperature coefficient of IV (typ) IF = 20mA; 0 ˚C <= T <= 85 ˚C 3 16/10/2015 V5.0 DOMINANT TM Opto Technologies InGaN White : DDW-UJG Innovating Illumination DDW, White Color Grouping For this color bin selection, part number will be DDW-UJG-xxxx-1 Dominant White Bin Structure 0.44 0.42 0.40 E3 0.38 E4 E1 0.36 C3 0.34 C4 C1 0.32 C2 A3 0.30 A1 0.28 V3 0.26 V1 0.24 E2 A4 A2 V4 V2 0.22 0.20 0.18 0.16 0.24 0.26 0.28 0.3 0.32 0.34 0.36 Chromaticity coordinate groups are measured with an accuracy of ± 0.01. 1 2 3 4 Cx 0.2525 0.2650 0.2650 0.2525 Cy 0.2318 0.2525 0.2700 0.2493 Cx 0.2525 0.2650 0.2650 0.2525 Cy 0.2143 0.2350 0.2525 0.2318 Cx 0.2650 0.2775 0.2775 0.2650 Cy 0.2525 0.2732 0.2907 0.2700 Cx 0.2650 0.2775 0.2775 0.2650 Cy 0.2350 0.2557 0.2732 0.2525 Cx 0.2775 0.2900 0.2900 0.2775 Cy 0.2732 0.2939 0.3114 0.2907 Cx 0.2775 0.2900 0.2900 0.2775 Cy 0.2557 0.2764 0.2939 0.2732 Cx 0.2900 0.3025 0.3025 0.2900 Cy 0.2939 0.3146 0.3321 0.3114 Cx 0.2900 0.3025 0.3025 0.2900 Cy 0.2764 0.2971 0.3146 0.2939 Cx 0.3025 0.3150 0.3150 0.3025 Cy 0.3146 0.3354 0.3529 0.3321 Cx 0.3025 0.3150 0.3150 0.3025 Cy 0.2971 0.3179 0.3354 0.3146 Cx 0.3150 0.3275 0.3275 0.3150 Cy 0.3354 0.3561 0.3736 0.3529 Cx 0.3150 0.3275 0.3275 0.3150 Cy 0.3179 0.3386 0.3561 0.3354 Bin V1 V2 V3 V4 A1 A2 A3 A4 C1 C2 C3 C4 4 16/10/2015 V5.0 DOMINANT TM Opto Technologies InGaN White : DDW-UJG Innovating Illumination 1 2 3 4 Cx 0.3275 0.3400 0.3400 0.3275 Cy 0.3561 0.3768 0.3943 0.3736 Cx 0.3275 0.3400 0.3400 0.3275 Cy 0.3386 0.3593 0.3768 0.3561 Cx 0.3400 0.3525 0.3525 0.3400 Cy 0.3768 0.3975 0.4150 0.3943 Cx 0.3400 0.3525 0.3525 0.3400 Cy 0.3593 0.3800 0.3975 0.3768 Bin E1 E2 E3 E4 Dominant color coordinate is measured with an accuracy of ± 0.01. 5 16/10/2015 V5.0 DOMINANT TM Opto Technologies InGaN White : DDW-UJG Innovating Illumination DDW, White Color Grouping For this color bin selection, part number will be DDW-UJG-xxxx-5K8L White Bin Structure 0.44 0.42 0.40 0.38 0.36 0.34 0.32 0.30 • • 0.28 0.26 0.24 0.27 0.28 0.29 5L • • 6L • 5K 0.30 6K • 0.31 0.32 • • • 0.33 7L • 7K 0.34 • • 8L • • • • 8K 0.35 0.36 0.37 Chromaticity coordinate groups are measured with an accuracy of ± 0.01. Bin 5K 5L 6K 6L 7K 7L 8K 8L Cx 0.296 0.291 0.310 0.313 Cy 0.259 0.268 0.297 0.284 0.310 Cx 0.291 0.285 0.307 Cy 0.268 0.279 0.312 0.297 0.330 Cx 0.313 0.310 0.330 Cy 0.284 0.297 0.330 0.310 0.330 Cx 0.310 0.307 0.330 Cy 0.297 0.312 0.347 0.330 Cx 0.330 0.330 0.338 0.352 Cy 0.310 0.330 0.342 0.344 Cx 0.330 0.330 0.347 0.345 Cy 0.330 0.347 0.371 0.352 Cx 0.352 0.338 0.364 0.360 Cy 0.344 0.342 0.380 0.357 Cx 0.345 0.347 0.367 0.364 Cy 0.352 0.371 0.401 0.380 Dominant color coordinate is measured with an accuracy of ± 0.01. 6 16/10/2015 V5.0 DOMINANT TM Opto Technologies InGaN White : DDW-UJG Innovating Illumination Luminous Intensity Group at Tj=25˚C Luminous Intensity IV (mcd) Brightness Group T2 355.0...450.0 U1 450.0...560.0 U2 560.0...715.0 Luminous intensity is measured with an accuracy of ± 11%. Vf Binning (Optional) Vf Bin @ 20mA Group Forward Wavelength Voltage (V) distribution (nm) 0A 2.75 ... 3.05 00 3.05 ... 3.35 01 3.35 ... 3.65 02 3.65 ... 3.95 Forward voltage, Vf is measured with an accuracy of ± 0.1 V. Please consult sales and marketing for special part number to incorporate Vf binning. 7 16/10/2015 V5.0 DOMINANT TM Opto Technologies InGaN White : DDW-UJG Innovating Illumination Relative Intensity; Normalized at 20mA Relative Intensity Relative Luminous Intensity Vs Forward Current Forward Current Vs Forward Voltage 2.4 50 Forward Current, mA 2 1.6 1.2 0.8 0.4 40 30 20 10 0 0 0 10 20 30 40 2 50 2.5 3 3.5 4 Forward Current, mA Forward Voltage, V Maximum Current Vs Ambient Temperature Relative Intensity Vs. Wavelength 25 1 0.8 20 Relative Intensity Forward Current, If Forward Current, mA 0.9 15 10 0.7 0.6 0.5 0.4 0.3 0.2 0.1 5 0 0 10 20 30 40 50 60 70 80 400 90 100 Ambient temperature Chromaticity Coordinate Shift -0.01 Cy -0.01 Delta CY Cx -0.02 -0.03 -0.02 -0.04 -0.03 0 0 52 4 6 10 8 10 1512 Forward current (mA) 650 700 750 800 14 20 18 16 20 1000 Allowable Forward Current ( mA ) 0 Allowable Forward Current ( mA ) 0.00 Delta CX Cy X Y , Δ CY ΔCX ȴC ,ȴ C Cx 0.02 0.01 600 ( Ta=25 Deg C, tp10uS ) Variables 0.03 0.01 550 Allowable Forward Current Vs Duty Ratio Vs Duty Ratio ) ( Allowable Ta=25Forward DegCurrent C, tp≤10uS 0.03 0.02 500 Wavelength, nm Chromaticity Coordinate Shift ( Tj=25° C ) 0.04 450 100 10 0.1 1 10 100 Duty Ratio, % Duty Ratio, % Forward current (mA) DDW-UJG 8 16/10/2015 V5.0 DOMINANT TM Opto Technologies InGaN White : DDW-UJG Innovating Illumination Radiation Pattern 30° 20° 10° 0° 1.0 40° 0.8 50° 0.6 60° 0.4 70° 0.2 80° 90° 0 9 16/10/2015 V5.0 DOMINANT TM Opto Technologies InGaN White : DDW-UJG Innovating Illumination DomiLED • InGaN White : DDW-UJG Package Outlines TM Material Material Lead-frame Cu Alloy With Ag Plating Package High Temperature Resistant Plastic, PPA Encapsulant Silicone Resin Soldering Leads Sn-Sn Plating 10 16/10/2015 V5.0 DOMINANT TM Opto Technologies InGaN White : DDW-UJG Innovating Illumination Recommended Solder Pad 11 16/10/2015 V5.0 DOMINANT TM Opto Technologies InGaN White : DDW-UJG Innovating Illumination Taping and orientation • Reels come in quantity of 2000 units. • Reel diameter is 180 mm. 12 16/10/2015 V5.0 DOMINANT TM Opto Technologies InGaN White : DDW-UJG Innovating Illumination Packaging Specification 13 16/10/2015 V5.0 DOMINANT TM Opto Technologies InGaN White : DDW-UJG Innovating Illumination Packaging Specification Existing BPL Moisture sensitivity level size - 87mm x 45mm. As part of improvement and also in response to customers’ request; BPL f Barcode label changed to the following. DOMINANT Opto Technologies (L) Lot No : lotno ML TEMP 2 260˚C RoHS Compliant (P) Part No : partno (C) Cust No : partno (Q) Quantity : quantity (G) Grouping : group (D) D/C : date code Made in Malaysia (S) S/N : serial no New BPL size - 110mm x 55mm. Additional information are now included in the label. 2D and 3D barc Reel implemented now for every data field. Label Moisture absorbent material + Moisture indicator Issue No : 1 The reel, moisture absorbent material and moisture indicator are sealed inside the moisture proof foil bag Weight Weight(gram) (gram) Average 1pc DomiLED/Multi DomiLED 1 completed bag (2000pcs) 0.034 0.034 240 ± 10 190 10 Cardboard Box DOMINANT TM For DomiLED TM Cardboard Box Size Dimensions (mm) Empty Box Weight (kg) Reel / Box Super Small 325 x 225 x 190 0.38 9 reels MAX Small 325 x 225 x 280 0.54 15 reels MAX Medium 570 x 440 x 230 1.46 60 reels MAX Large 570 x 440 x 460 1.92 120 reels MAX 14 16/10/2015 V5.0 DOMINANT TM Opto Technologies InGaN White : DDW-UJG Innovating Illumination Recommended Pb-free Soldering Profile Classification Reflow Profile (JEDEC J-STD-020C) 300 255-260˚C 10-30s 275 250 225 Temperature (˚C) Ramp-up 3˚C/sec max. 217˚C 200 60-150s 175 150 125 Rampdown 6˚C/sec max. 100 75 Preheat 60-180s 50 25 480s max 0 50 100 150 200 Time (sec) 15 16/10/2015 V5.0 DOMINANT TM Opto Technologies InGaN White : DDW-UJG Innovating Illumination Revision History Page Subjects Date of Modification - Initial release 09 Dec 2011 2, 3, 4 Add new partno: DDW-UJG-T2U-1 Add new color bin structure 12 Mar 2013 2, 3 Add Thermal Resistance and Characteristics 11 Dec 2013 8 Add Graph: Chromaticity Coordinate Shift Add Graph: Allowable Forward Current Vs Duty Ratio 04 Aug 2014 1, 14 Add Features Update Packaging Specification 16 Oct 2015 NOTE All the information contained in this document is considered to be reliable at the time of publishing. However, DOMINANT Opto Technologies does not assume any liability arising out of the application or use of any product described herein. DOMINANT Opto Technologies reserves the right to make changes to any products in order to improve reliability, function or design. DOMINANT Opto Technologies products are not authorized for use as critical components in life support devices or systems without the express written approval from the Managing Director of DOMINANT Opto Technologies. 16 16/10/2015 V5.0 DOMINANT TM Opto Technologies Innovating Illumination InGaN White : DDW-UJG About Us DOMINANT Opto Technologies is a dynamic Malaysian Corporation that is among the world’s leading SMT LED Manufacturers. An excellence – driven organization, it offers a comprehensive product range for diverse industries and applications. Featuring an internationally certified quality assurance acclaim, DOMINANT’s extra bright LEDs are perfectly suited for various lighting applications in the automotive, consumer and communications as well as industrial sectors. With extensive industry experience and relentless pursuit of innovation, DOMINANT’s state-of-art manufacturing, research and testing capabilities have become a trusted and reliable brand across the globe. More information about DOMINANT Opto Technologies can be found on the Internet at http://www.dominant-semi.com. Please contact us for more information: DOMINANT Opto Technologies Sdn. Bhd Lot 6, Batu Berendam, FTZ Phase III, 75350 Melaka, Malaysia. Tel: +606 283 3566 Fax: +606 283 0566 E-mail: [email protected] DOMINANT Opto Technologies Innovating Illumination TM