Magic Xtal Ltd. MXO37/8P Only Magic Technologies! Revised in February 2014 Very low power high stability low phase-noise miniature OCXO Features 8DIP compatible Miniature DIP8 sizes Very low power consumption (to 0.15W at +25°C) High frequency stability (to ± 5 ppb over -40°C to 85°C) Very fast warming-up (to 15 s) Very low phase-noise level (-173 dBc/Hz, floor) Low aging (to ± 2x10-10/day, ± 3x10-8/year) Fundamental operation at up to 150 MHz NEW! Typical Applications Portable Wireless Communications Mobile Test equipment Beacons & Rescue systems Battery Powered Applications RoHS compliant Description The МХО37 series utilizes the internal heating resonator technology (IHR) with arrangement of the oven system together with the crystal plate inside the TO-8 vacuum holder. Such approach results in radical reduction of the OCXO sizes, power consumption and warm-up time. Compared with the basic MXO37/8 series the new model contains improved oscillator circuitry providing operation at higher fundamental frequencies at substantially better temperature stability and lower phasenoise level. The MXO37/8P is excellent solution for various portable or/and battery fed applications with elevated requirements to frequency stability and phase-noise of the OCXO. Physical Dimensions MXO37/8P Pin Connections MXO37/8PS Vcc Vref 8 2 OSC R 10k Vc 5 out 1 Rload 4 Gnd Pin 1 2 4 5 8 CONTACT: GmbH & Co. KG Römerring 9 D‐74821 Mosbach/Germany Signal Electrical tuning Reference voltage GND RF Out +V Supply web : www.AXTAL.com page 1 (2) fon : +49 (6261) 939834 e‐mail: [email protected] Magic Xtal Ltd. MXO37/8P Very low power high stability low phase-noise miniature OCXO Specification Parameter Sym. Frequency range RF output Load HCMOS (TTL) H-level voltage option L-level voltage Duty cycle Rise/Fall time Sinewave option Level Load Harmonics level Sub-harmonics level Power supply Voltage Conditions Min. 8 f0 Value Typ. Max. 150 10 15 VH VL 3.8 0.4 55 10 45 L RL +6 +8 50 +10 Unit Note MHz Fundamental operation kOhm pF V V % ns For 10MHz operational Frequency. -25 dBm Ohm dBc 5.25 V 3.3V available W W s ref. to frequency after 10 min. none Vcc Power consumption Warm-up state Steady state, +25ºC to f/f=1e-7, at +25ºC Warm-up time Frequency control Control voltage range tup Vc Vcc=5 V Vcc=3.3 V Tuning range Reference voltage Vref Vcc=5 V Vcc=3.3 V Frequency stability vs. temperature vs. supply voltage vs. acceleration SSB Phase noise 4.75 5.0 15 0.7 0.15 45 0 0 ±0.5 4.1 2.7 4.2 2.8 ±1 4.2 2.8 4.3 2.9 5 -40ºC to +85ºC, ref 25ºC ref Vcc typ. Worst direction 1 Hz 10 Hz 100 Hz 1 kHz 10 kHz 100 kHz 1s after 30 days of operation 2 ±0.5 -100 -130 -150 -160 -170 -173 1 -95 -125 -145 -155 -165 -168 20 0.5 0.05 V V ppm V V ppb ppb ppb/G dBc/Hz Tuning slope - positive (standard option) See chart below For 10 MHz operational frequency. e-12 ppb ppm Allan variance per day Aging first year Environmental, mechanical conditions. Operating temperature range See chart below. Storage temperature range -60ºC to +90ºC Humidity Non-condensing 95% Mechanical shock Per MIL-STD-202, 30G half sine pulse, 11ms Vibration Per MIL-STD-202, 10G swept sine 10 to 2000 Hz Soldering conditions Hand solder only – not reflow compatible. 260ºC 10s (on pins) See chart below Ordering code MXO37 1 Code /8P /8PS /8P 1 Packaging type Case 8 DIP 8 DIP SMD 2 Temperature range Code Specification A 0ºC..50ºC B -10ºC..60ºC C 0ºC..70ºC D -20ºC..70ºC E -30ºC..70ºC F -40ºC..85ºC C 2 58 3 3 Code XZ 39 59 18 28 58 17 C 4 5 5 S 6 - 10 MHz Stability over temperature Specification Temperature range code available 10 MHz 100 MHz ±Xe-Z ±3e-9 A…B ±5e-9 A…F ±1e-8 A…F A ±2e-8 A…F A…E ±5e-8 A…F A…F ±1e-7 A…F A…F Deviation of the parameters is possible on customers’ requirements. 4 Code B Z C D E F G H Per day 0.2 ppb 0.3 ppb 0.5 ppb 1.0 ppb 1.5 ppb 2.0 ppb 3.0 ppb 5.0 ppb Aging First year 0.02 ppm 0.03 ppm 0.05 ppm 0.1 ppm 0.15 ppm 0.2 ppm 0.3 ppm 0.5 ppm 5 Supply voltage Code Specification 3 3.3V±5% 5 5V±5% 6 Code T S Frequency Below 50 MHz Above 50 MHz Output Specification HSMOS/TTL Sine-wave