TECHNICAL CHARACTERISTICS 1 4 2 4,5 3 SPECIFICATION >Rating: 50mA, 12VDC >Contact Resistance: Initial: 100mOHM max. After Life Test: 2OHM max. >Insulation Resistance: min. 100MOHM at 500VDC >Dielectric Strength: 250VAC for 1 minute >Stroke: 0.25 ± 0.15mm >Bounce: 10ms max. 3 0,7 4,5 1 1,3 9,0 ±0,2 2 4 6,4 9,5 MATERIAL >Cover: Stainless Steel >Stem: LCP UL 94V-0 >Frame: LCP UL 94V-0, color Black >Contact: Stainless Steel with silver >Terminal: Brass with silver plating O D u0,2 h 0,10 Ref. 6,2 0,15 H u 0,15 3,4 ±0,15 P.C.B. MOUNTING PLAN 1 6,2 2 3 SOLDERING INFORMATION >Terminal in SMD version >Reflow soldering according to JEDEC J-STD 020 Hot Air >Hand soldering under 350°C for 3 sec. max 4 ENVIRONMENTAL >Storage condition: -40°C ~ +85°C >Operation condition: -40°C ~ +85°C >Compliance: Lead Free, ROHS, Reach SCHEMATIC PACKAGING INFORMATION >Tape & Reel 4,6 ±0,2 PN Force 4,6 ±0,2 430 182 xxx 816 430 152 xxx 826 430 152 xxx 836 Color of Stem Life cycle Black White Salmon 1.000.000 200.000 200.000 160g ± 50gf 260g ± 50gf 360g ± 50gf -043 H ØD 4.3 3.5 -050 H ØD 5.0 3.5 -070 H ØD 7.0 3.0 -080 H ØD 8.0 3.0 -095 H ØD 9.5 -130 H ØD 3.0 13.0 3.0 O 3,5 ±0,2 Scale - 3:1 This electronic component is designed and developed with the intention for use in general electronics equipments. Before incorporating the components into any equipments in the field such as aerospace, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc. where higher safety and reliability are especially required or if there is possibility of direct damage or injury to human body, Wurth Elektronik must be asked for a written approval. Projection GENERAL TOLERANCE .x = +/- 0,2 .xx = +/- 0,15 Date Drawn e d 09-09-15 remove Contact cladding 14-10-30 DaF Checked 09-09-15 revised MatchCode 14-07-24 AL Bounce 10ms max. 14-04-11 DaF In addition, even electronic component in general electronic equipments, b new values in chart 12-09-13 WJ when used in electrical circuits that require high safety, reliability 11-10-28 WJ a warning text functions or performance, the sufficient reliability evaluation-check for the REV FILE DATE BY safety must be performed before by the user before usage. c WE eiCan CAD Name Basic material DESCRIPTION Jelisarow Hsu WS-TASV 6x6mm Tact Switch, SMD version 3:1 Position Würth Elektronik Scale eiCan Drawing.- No. 4301x2xxx8x6 EDV NO 4301x2xxx8x6.dft SIZE A4 System :Solid Edge V20