tmj9911 detectors

ANALOG LEVEL
DETECTOR TMJ9911
Available as:
TMJ9911, 5 Pin TO-8 (T5)
TNJ9911, 4 Pin Sq. Surface Mount (SM3)
BXJ9911, SMA Connectorized Housing (H6)
Features
!
!
!
!
-120 mV Output for -10 dBm Input Power
±1.0 dB Flatness
Operating Temp. 0 ºC to +50 ºC
Environmental Screening Available
Maximum Ratings
Specifications
CHARACTERISTIC
TYPICAL
Ta= 25 ºC
MIN/MAX
Ta = 0 ºC to +50 ºC
Detected Voltage (mV)
f = 500 MHz *^
-120
-90 Min.
Flatness (referred to Input)(dB)
f = 10 - 1000 MHz *^
±0.7
±1.5 Max.
Variation over Temperature (dB)
(referred to input) f=500 MHz*^
±1
Tangential Sensitivity(TSS)(dBm)
f= 500 MHz, BWVID = 1 MHz*
-32
Input VSWR, 50 Ohm
f = 10 - 500 MHz
Output Offset Voltage (mV)
ID = IREF = 50 µA, no RF Drive
-30 Max.
1.5:1
1.5:1 Max.
±10
±15.0 Max.
Differential Voltage Tracking(mV)
Output Capacitance (pf)
±5
1000
1300 Max.
Power
+15
16
+15 Min.
20 Max.
Vdc
mA
Ambient Operating Temperature ................ -55ºC to +125 ºC
Storage Temperature .................................-62ºC to +150 ºC
Bias Current (Diode) ................................................... 1 mA
Continuous RF Input Power .................................. +17 dBm
Short Term RF Input Power ........... 100 mW (1 Minute Max.)
Note: Care should always be taken to effectively ground the case of each unit.
* ID = 50 µA, R = 10 kOhm
^ PIN = -10 dBm (RF Input)
Typical Performance Data
Output Voltage @ -10 dBm Input Power
Output Voltage vs Input Power @ 500 MHz (mV)
-150
1000
-140
R L = 10kOhm
500 MHz
-130
ID = 50µA
-120
100
P = -10 dBm
D
-110
I D = 50µA
-100
Start 10 MHz
Stop 2000 MHz
VSWR
10
-20
-10
-5
0
+5
+10
2.0
Input Power (dBm)
1.5
Legend
+ 25 ºC
+ 50 ºC - - - - - - 0 ºC
1.0
Start 10 MHz
Stop 2000 MHz
Spectrum Microwave · 2144 Franklin Drive N.E. · Palm Bay, Florida 32905 · PH (888) 553-7531 · Fax (888) 553-7532
4/08/04
www.SpectrumMicrowave.com Spectrum Microwave · 2707 Black Lake Place · Philadelphia, Pennsylvania 19154 · PH (215) 464-4000 · Fax (215) 464-4001