DOMINANT TM PRELIMINARY DATA SHEET : PrimaxTM Opto Technologies 250 InGaN Warm White : NAF-HHG Innovating Illumination Primax TM fin a te tc ec ifi ca tio n do es no in on ar st itu y a D Super high brightness surface mount LED 120° viewing angle. Compact package outline (LxW) of 3.5 x 3.5 mm. Ultra low height profile - 1.2mm. Low thermal resistance. Compatible to IR reflow soldering. Environmental friendly; RoHS compliance. Superior corrosion resistance. Excellent reliability with new state-of-the-art phosphor system. el im > > > > > > > > > lo Features: ffe ra r ft Synonymous with function and performance, enter the Primax, the new era of high intensity illumination in LED. With its high flux output and high luminous intensity, Primax transcends today LED lightings technology and how we perceive it. The small package outline (3.5 x 3.5 x 1.2 mm) and high intensity make it an ideal choice for backlighting, signage, exterior automotive lighting and decorative lighting. Pr Applications: Th is sp > Automotive: exterior applications. > Lighting: garden light, architecture lighting, general lighting. etc > Backlighting (TFT LCD display), flash light, architectural lighting. All rights reserved. Product specifications are subject to change without notice. 1 06/02/2014 PV2.0 DOMINANT TM 250 InGaN Warm White: NAF-HHG Opto Technologies Innovating Illumination Optical Characteristics at Tj=250C Part Ordering Number Color Warm White NAF-HHG-ST2-1 Luminous Flux @ 250mA (lm) Min. Typ. Max. Viewing Angle˚ 51.7 120 67.2 76.5 NOTE 1. Luminous intensity is measured with an accuracy of ± 11%. 2. Wavelength binning is carried for all units as per the wavelength-binning table. Only one wavelength group is allowed for each reel. D ra ft Electrical Characteristics at Tj=250C NAF-HHG 3.4 3.7 3.0 ffe Max. (V) lo Typ. (V) fin a Min. (V) Vr @ Ir = 10uA r Vf @ If = 250 mA Part Number Min. (V) 5 te tc es n Absolute Maximum Ratings do im no in on ar st itu y a Forward Voltages are tested using a current pulse of 1 ms and has an accuracy of ± 0.1 V. 300 mA 350 mA 5 V ESD threshold (HBM) 2000 V LED junction temperature 150 ˚C Operating temperature -40 … +125 ˚C Storage temperature -40 … +125 ˚C - Junction / ambient, Rth JA 90 K/W - Junction / solder point, Rth JS (Mounted on dual-sided FR4 in-house PCB ; 35 K/W sp ec ifi ca Pr DC forward current tio Unit el Maximum Value Reverse voltage Th i s Peak pulse current Thermal resistance total Cu area > 900 mm²) 2 06/02/2014 PV2.0 DOMINANT TM Opto Technologies 250 InGaN Warm White: NAF-HHG Innovating Illumination Color Bin - Warm White 0.48 0.46 2670K 2850K 3050K 3250K 0.44 3500K PM QM 0.42 0.40 0.38 QP MO NO PO QO MN NN PN QN MM NM MP NP PP 0.36 0.44 0.46 0.48 0.50 r 0.42 PN Cy 0.382 Cx 0.437 Cy 0.438 Cx 0.430 NM NN NO NP on tc 0.423 3 4 0.430 0.415 0.421 0.416 0.423 0.409 0.405 0.400 0.416 0.402 0.387 0.382 0.416 0.409 0.397 0.387 0.372 0.367 0.452 0.444 0.430 0.443 0.426 0.421 0.444 0.436 0.423 0.421 0.426 0.409 0.405 0.423 0.436 0.428 0.416 0.405 0.409 0.392 0.387 0.416 0.428 0.421 0.409 Cy 0.387 0.392 0.377 0.372 Cx 0.452 0.469 0.460 0.444 Cy 0.443 0.448 0.431 0.426 Cx 0.444 0.460 0.451 0.436 Cy 0.426 0.431 0.414 0.409 Cx 0.436 0.451 0.443 0.428 Cy 0.409 0.414 0.397 0.392 Cx 0.428 0.443 0.435 0.421 Cy 0.392 0.397 0.382 0.377 Cy Cx s Cx sp Cy Th i PP a 0.402 te 0.400 Cx D Cy 0.421 itu 0.409 0.430 st 0.416 Cx 0.438 ar Cy Pr PO 0.415 do es no 0.405 io n PM 0.433 Cx at QP Cy 0.437 ifi c QO 0.421 ec QN Cx el im in QM 2 1 y Bin fin a lo ra Chromaticity coordinate groups are measured with an accuracy of ± 0.01. ffe 0.40 ft 0.34 0.38 4 06/02/2014 PV2.0 DOMINANT TM Opto Technologies 250 InGaN Warm White: NAF-HHG Innovating Illumination 1 2 3 4 Cx 0.469 0.487 0.477 0.460 Cy 0.448 0.454 0.437 0.431 Cx 0.460 0.477 0.467 0.451 Cy 0.431 0.437 0.420 0.414 Cx 0.451 0.467 0.458 0.443 Cy 0.414 0.420 0.403 0.397 Cx 0.443 0.458 0.449 0.435 Cy 0.397 0.403 0.388 0.382 Bin MM MN MO MP te tc es do tio Th is Pr sp ec ifi ca el n im no in on ar st itu y a fin al of fe r D ra ft InGaN wavelength is very sensitive to drive current. Operating at lower current is not recommended and may yield unpredictable performance. Current pulsing should be used for dimming purposes 5 06/02/2014 PV2.0 DOMINANT TM Opto Technologies 250 InGaN Warm White: NAF-HHG Innovating Illumination Luminous Intensity Group at Tj=250C Brightness Group Luminous Flux (lm) S2 51.7 ... 59.0 S3 59.0 ... 67.2 T2 67.2 ... 76.5 fin al of fe r D ra ft Luminous intensity is measured with an accuracy of ± 11%. itu st on tc es no in 3.00 ... 3.30 3.30 ... 3.60 3.60 ... 3.90 tio n V3 2.70 ... 3.00 do im V2 Forward Wavelength Voltage (V) distribution (nm) ar V0 V1 Group y Vf Bin @ 250mA te a Vf Binning (Optional) Th is Pr sp ec ifi ca el Forward voltage, Vf is measured with an accuracy of ± 0.1 V. Please consult sales and marketing for special part number to incorporate Vf binning. 6 06/02/2014 PV2.0 DOMINANT OptoTechnologies Technologies DOMINANT Opto UNDER DEVELOPMENT 0 DOMINANT Opto Technologies UNDER DEVELOPMENT DOMINANT Opto Technologies 0 2.0 2.5are 3.0 Engineering reference data areare notnot verified. The The specifications subject to 4.0 to 4.5 DOMINANT Engineering reference data verified. specifications are 3.5 subject TM Engineering referencechange data arewithout not verified. The specifications are to4.0 notice. 250 InGaN White: NAF-HHG change notice. Opto Technologies 2.5 Warm 3.0subject 3.5 Engineering reference datawithout are not verified. The2.0 specifications are subject to 4.5 Vf (volts) change without notice. change without notice. Vf (volts) Relative intensity vs. forward current Forward voltage vs. forward current Relative Intensity Vs Forward Current Relative intensity vs. forward current Forward voltage vs. forward current Color Spectrum Radiation pattern. Relative intensity vs. forward current Forward voltage vs. forward current Relative intensity vs. forward current Forward voltage vs. forward current Color Radiation pattern. 1.8 Spectrum 30° 20° 10° 0° 500 500 1.6 500 1.0 0° 4001.2 400 400 1.2 1.0 40° 0.8 0.6 50° Tjmax VF50° max IF max 60°Rthja 150 3.7 300 90 60° Ta (Max@ 120mA ) IF @ 125 deg C 125 Ta 0 20 125 125 0 0 pattern. Radiation pattern. Radiation pattern. Radiation pattern. Max Current vs. Ambient Temperature IF 300 300 56.3 0 30° 20° 10° 0° 30° vs. 10° 20° 10° Temperature 0° 30° 20° 0° MaxMaximum Current Ambient 1.0 30° 20° 10° 0°Ambient Temperature Current Vs 1.0 1.0 350 1.0 40° 40° 300 40° IF ( mA ) 60° 60° 70° 70° 80° 90° 80° 90° 0.8 250 50° 50° 0.8 40° 0.6 50° 50° 0.6 200 150 60° 100 70° 70° 0.4 0.2 80° 50 80° 90°0 60° 0.4 Rja= 120K/W 0.2 0 90° 0 10 20 30 40 50 deg C V mA K/W 0.8 0.6 0.4 0.2 0 1 300 300 1.0 300 0.8 0.6 200 200 200 0.8 0.8 200 0.6 100 0.4 0.6 100 100 0.2 0.4 100 400 450Wavelength 500 550(nm)600 650 Color Spectrum Wavelength (nm) Spectrum Color Color Spectrum Color Spectrum Relative Intensity Vs Wavelength 1.2 Rja= 0.6 90K/W 1.0 0.8 0.6 Rthja =90K/W Rthja=120K/W 0.2 0 060 70 80 90 100 110 120 400 0.4 0 0.2 00 0 56.3 mA 2.0 0 2.5 3.0 3.5 4.060 4.5 80 20 40 100 0.22.0 2.0 2.0 2.5 3.0 3.5 4.04.04.0 4.54.54.5 2.5 2.5 3.0 3.0 3.5 3.5 0.0 Vf Forward (volts) Current; mA Vf (volts) Vf(volts) (volts) 400 450 500Vf 550 600 650 700 0.0 0.8 0.4 1.2 3001.0 16.8 deg 0C IF @ 125 deg C 0.2 125 90° Radiation 150 3.7 300 120 Ta (Max@ 120mA ) 0.2 IF 300 300 75.1 0 80° 50.1 90° 0.4 75.1 mA 70° Tjmax VF max IF max Rthja 0.4 50.1 deg C 70° Ta 0 0.6 deg C V mA K/W Relative Emission Intensity NAZY-HHG 80° If (mA) 0.8 40° 500 1.4 If (mA) 10° Temperature ( Deg C ) Temperature Current vs. Ambient Max CurrentMax vs.Ambient Ambient Temperature Max Current vs. Ambient Temperature 0.4 0.2 1 1.2 0.9 1.2 Relative Emission Intensity 20° Relative Intensity Relative Emission Intensity Relative Emission Intensity 30° Relative Emission Intensity Relative Intensity; Normalized at 60mA If (mA) (mA) If Relative Emission Intensity Innovating Illumination 0.8 1.0 1.0 0.7 0.8 0.6 0.8 0.5 0.6 0.6 0.4 0.4 0.3 0.4 700 1.2 1.0 0.8 0.6 0.4 0.2 0.2 0.2 0.1 0.0 0.2 0.0 0 4000.0 450 400 500 450 550 500 600 550 650 600 700 650 700 300 450 500 900 0.0 400 500 550700 600 650 7001100 (nm) Wavelength Wavelength (nm) 400 450 Wavelength 500 550 (nm) 600 650 700 Wavelength; nm Wavelength (nm) Max Current vs. Ambient Temperature 27/06/12 27/06/12 30° Primax 250 InGaN White NAW-HHG -pv3 Radiation Pattern Primax 250 InGaN White NAW-HHG -pv3 20° 10° Page 7 of 10 Page 7 of 10 0° 1.0 40° 0.8 50° 0.6 60° 0.4 70° 0.2 80° 90° 27/06/12 27/06/12 27/06/12 27/06/12 0 Primax 250 InGaN White NAW-HHG -pv3 Primax 250 InGaN White NAW-HHG -pv3 Primax 250 InGaN7 White NAW-HHG -pv3 Primax 250 InGaN White NAW-HHG -pv3 Page 7 of 10 Page 7 of 10 Page 706/02/2014 of 10 PV2.0 Page 7 of 10 DOMINANT TM 250 InGaN Warm White: NAF-HHG Opto Technologies Innovating Illumination Primax • 250 InGaN Warm White: NAF-HHG Package Outlines ffe fin a te tc es do tio Th is sp Pr ec ifi ca el n im no in on ar st itu y a D lo ra r ft TM Material Material Lead-frame Cu Alloy With Au Plating Package High Temperature Resistant Plastic, PPA Encapsulant Silicone Resin Soldering Leads Au Plating 8 06/02/2014 PV2.0 DOMINANT TM 250 InGaN Warm White: NAF-HHG Opto Technologies Innovating Illumination ffe fin a te tc Th is Pr sp ec ifi ca t io n do e s no el im in on ar st itu y a D lo ra r ft Recommended Solder Pad 9 06/02/2014 PV2.0 DOMINANT TM Opto Technologies 250 InGaN Warm White: NAF-HHG Innovating Illumination Taping and orientation ffe fin a te tc es do Th is sp Pr ec ifi ca tio n el im no in on ar st itu y a D lo ra r ft • Reels come in quantity of 1000 units. • Reel diameter is 180 mm. 10 06/02/2014 PV2.0 DOMINANT TM Opto Technologies 250 InGaN Warm White: NAF-HHG Innovating Illumination te tc es do tio Th is Pr sp ec ifi ca el n im no in on ar st itu y a fin al of fe r D ra ft Packaging Specification 11 06/02/2014 PV2.0 DOMINANT TM Opto Technologies 250 InGaN Warm White: NAF-HHG Innovating Illumination Packaging Specification Moisture sensitivity level Barcode label DOMINANT ROHS Compliant LOT NO : lotno PB Free PART NO : partno QTY : product quantity per reel S/N : serial no D/C: date code fin te itu y a Moisture absorbent material + Moisture indicator Label D Reel al of fe r ra ft GROUP : group tc on ar st The reel, moisture absorbent material and moisture indicator are sealed inside the moisture proof foil bag 1 completed bag (1000pcs) 0.041 0.034 160 ± 10 190 10 es do tio Th is sp Pr ec ifi ca el n im Weight Weight(gram) (gram) no in Average 1pc Primax Cardboard Box DOMINANT TM For Primax TM Cardboard Box Size Dimensions (mm) Empty Box Weight (kg) Reel / Box Quantity / Box (pcs) Small 300 x 250 x 250 0.58 15 reels MAX 15,000 MAX Large 416 x 516 x 476 1.74 96 reels MAX 96,000 MAX 12 06/02/2014 PV2.0 DOMINANT TM Opto Technologies 250 InGaN Warm White: NAF-HHG Innovating Illumination Recommended Pb-free Soldering Profile Classification Reflow Profile (JEDEC J-STD-020C) 300 255-260˚C 10-30s 275 250 217˚C 225 200 60-150s 175 150 125 100 75 0 50 100 150 ffe 200 te tc es do Th is Pr sp ec ifi c at io n el im no in on ar st itu y a D Time (sec) lo 480s max fin a 25 Rampdown 6˚C/sec max. r 50 ft Preheat 60-180s ra Temperature (˚C) Ramp-up 3˚C/sec max. 13 06/02/2014 PV2.0 DOMINANT TM Opto Technologies 250 InGaN Warm White: NAF-HHG Innovating Illumination Revision History Subjects Date of Modification - Initial release 02 Apr 2013 7 Update Graph: Max Current Vs Ambient Temperature 06 Feb 2014 fin te tc es do n NOTE im no in on ar st itu y a D al of fe r ra ft Page tio Pr el All the information contained in this document is considered to be reliable at the time of publishing. However, DOMINANT sp ec ifi ca Opto Technologies does not assume any liability arising out of the application or use of any product described herein. DOMINANT Opto Technologies reserves the right to make changes to any products in order to improve reliability, function Th i s or design. DOMINANT Opto Technologies products are not authorized for use as critical components in life support devices or systems without the express written approval from the Managing Director of DOMINANT Opto Technologies. 14 06/02/2014 PV2.0 DOMINANT TM Opto Technologies 250 InGaN Warm White: NAF-HHG Innovating Illumination About Us DOMINANT Opto Technologies is a dynamic Malaysian Corporation that is among the world’s leading SMT LED Manufacturers. An excellence – driven organization, it offers a comprehensive product range for diverse industries and applications. Featuring an internationally certified quality assurance acclaim, DOMINANT’s extra bright LEDs are perfectly suited for various lighting applications in the automotive, consumer and communications as well as industrial sectors. With extensive industry experience and relentless pursuit of innovation, DOMINANT’s state-of-art manufacturing, research and testing capabilities have become a trusted and reliable brand across the globe. More information about DOMINANT Opto Technologies can be found on the Internet at http://www.dominant-semi.com. Please contact us for more information: ft Head Quarter ffe fin a te tc es do Th is sp ec Pr e ifi c at io n lim no in on ar st itu y a D lo ra r DOMINANT Opto Technologies Sdn. Bhd Lot 6, Batu Berendam, FTZ Phase III, 75350 Melaka, Malaysia. Tel: +606 283 3566 Fax: +606 283 0566 E-mail: [email protected] DOMINANT Opto Technologies Innovating Illumination TM