SANKEN ELECTRIC CO., LTD. RX10Z 1. Scope The present specifications shall apply to an RX10Z. 2. Outline Type Silicon Diode Structure Resin Molded Applications High Frequency Rectification 3. Flammability UL94V-0(Equivalent) 030701 1/5 61426-01 SANKEN ELECTRIC CO., LTD. RX10Z 4. Absolute maximum ratings No. Item Symbol Unit Rating Conditions 1 Transient Peak Reverse Voltage VRSM V 200 2 Peak Reverse Voltage VRM V 200 3 Average Forward Current IF(AV) A 2.0 Refer to Derating of 7 4 Peak Surge Forward Current IFSM A 30 Half sinewave, one shot 5 I2t Limiting Value I2t A2s 4.5 1msec≤t≤10msec 6 Junction Temperature Tj °C -40~+150 7 Storage Temperature Tstg °C -40~+150 Symbol Unit Value 5. Electrical characteristics No . Item Conditions 1 Forward Voltage Drop VF V 0.98 max. IF=2.0A 2 Reverse Leakage Current IR uA 50 max. VR=VRM 3 Reverse Leakage Current Under High Temperature H・IR mA 3.0 max. VR=VRM, Tj=150°C trr-1 ns 30 max. trr-2 ns 25 max. Rth(j-l) °C /W 15 max. 4 5 Reverse Leakage Current Under High Temperature Thermal Resistance 030701 IF=IRP=100mA 90% Recovery point, Tj=25°C IF=100mA,IRP=200mA 75% Recovery point ,Tj=25°C Between Junction and Lead 2/5 61426-01 SANKEN ELECTRIC CO., LTD. RX10Z 6. Characteristics IF(AV) - PF 3.0 Tj=150℃ t t/T=1/6 2.0 t/T=1/3,sinewave PF (W) Forward Power Dissipation (W) T t/T=1/2 1.0 DC 0.0 0.0 1.0 2.0 IF(AV) (A) Average Forward Current (A) VR - P R 0.6 Tj=150℃ 0.5 t PR (W) Reverse Power Dissipation (W) T 0.4 1-t/T=5/6 0.3 1-t/T=2/3 0.2 1-t/T=1/2 0.1 sinewave 0.0 0 100 200 VR (V) Reverse Voltage (V) 030701 3/5 61426-01 SANKEN ELECTRIC CO., LTD. RX10Z 7. Derating Tl - IF(AV) 2.0 DC IF(AV) (A) Average Forward Current (A) t/T=1/6 t/T=1/3 1.0 t/T=1/2 Tj=150℃ sinewave t T 0.0 80 90 100 110 120 130 140 150 Tl (°C) Lead Temperature (°C) 030701 4/5 61426-01 SANKEN ELECTRIC CO., LTD. RX10Z 8. Package information 8-1 Package type, physical dimensions and material *1 *2 *3 ±0.05 ※1 ※3 ※2 φ0.78 φ4.0 ±0.2 62.5 ±0.7 7.2 ±0.2 The allowance position of Body against the center of whole lead wire is 0.5mm(max.) The centric allowance of lead wire against center of physical body is 0.3mm(max.) The burr may exit up to 2mm from the body of lead Dimensions in ㎜ 8-2 Appearance The body shall be clean and shall not bear any stain, rust or flaw. 8-3 Marking ① Type number RX10Z ② Lot number 1 First digit: Last digit of Year Second digit: Month From 1 to 9 for Jan. to Sep. O for Oct., N for Nov., and D for Dec. カソード表示 Cathode Band ① ② 030701 ③ Lot number 2 (ten days) ・: Top of the month ・・: Middle of month ・・・: End of month ① ③ ② ③ 5/5 61426-01