A1 THRU A7 星合电子 GENERAL PURPOSE PLASTIC RECTIFIER ＸＩＮＧＨＥ ＥＬＥＣＴＲＯＮＩＣＳ Reverse Voltage - 50 to 1000 Volts Forward Current -1.0Ampere SOD-123FL Cathode Band Top View 1.8± 0.1 １．０±0.2 XH 1.2± 0.2 0.10-0.30 2.8±0.1 0.6±0.25 Case : Molded plastic, JEDEC SOD123 / MINI SMA Terminals : Solder plated, solderable per MIL-STD-750, Method 2026 Polarity : Indicated by c athode band Mounting Position : Any Weight : 0.04 gram 3.7±0.2 Dimensions in millimeters MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (Ratings at 25 C ambient temperature unless otherwise specified ,Single phase ,half wave 60Hz,,resistive or inductive load. For capacitive load, derate by 20%.) Symbols A1 A2 A3 A4 A5 A6 A7 50 100 200 400 600 800 1000 35 70 140 280 420 560 700 50 100 200 400 600 800 1000 Unis Maximum DC Blocking Voltage VRRM VRMS VDC Maximum average Forward Rectified Current 0.375"(9.5mm) lead length at TA=75 C I(AV) 1.0 Amp Peak Forward Surge Current (8.3ms half sinewave superimposed on rated load (JEDEC method) TA=75 C IFSM 30.0 Amps VF 1.0 Volts Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum Instantaneous Forward Voltage at 1.0 A Maximum Reverse current at rated DC Blocking Voltage TA =25 C TA =100 C IR 50.0 A 65.0 C/W CJ 10.0 PF TA TJ TSTG +150 C -65 to+150 C Typical Thermal resistance (Note 2) R Typical Junction Capacitance(Note 1) Maximum DC Blocking Voltage temperature Operating and Storage temperature Range 5.0 Volts Volts Volts JA Note: 1.Measured at 1MHz and applied reverse voltage of 4.0V DC. 2.Thermal resistance from junction to ambient and from junction to lead at 0.375"(9.5mm)lead length, P.C.B. mounted 1 ＧＡＯＭＩ ＸＩＮＧＨＥ ＥＬＥＣＴＲＯＮＩＣＳ ＣＯ．，ＬＴＤ． ＷＷＷ．ＳＤＤＺＧ．ＣＯＭ A1 THRU A7 星合电子 GENERAL PURPOSE PLASTIC RECTIFIER ＸＩＮＧＨＥ ＥＬＥＣＴＲＯＮＩＣＳ Reverse Voltage - 50 to 1000 Volts Forward Current -1.0Ampere FIG.2-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 1.0 0.8 INSTANTANEOUS FORWARD CURRENT( AMPERES) AVERAGE FORWARD CURRENT (AMPERES) FIG.1-FORWARD CURRENT DERATING CURVE 0.6 0.4 SINGLE PHASE HALF WAVE 60Hz RESISTIVE OR INDUCTIVE LOAD 0.2 0 0 25 50 75 100 125 150 175 AMBIENT TEMPERATURE ( C) 20 10 1 TJ=25 C PULSE WIDTH=300 S 1% DUTY CYCLE 0.1 0.01 FIG.3-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 0.6 0.8 1.0 1.2 1.4 1.5 INSTANTANEOUS FORWARD VOLTAGE (VOLTS) 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) 40 30 FIG.4-TYPICAL REVERSE CHARACTERISTICS 20 INSTANTANEOUS REVERSE CURRENT ( A) PEAK FORWARD SURGE CURRENT(AMPERES) 50 10 0 1 10 100 NUMBER OF CYCLES AT 60Hz FIG.5-TYPICAL JUNCTION CAPACITANCE JUNCTION CAPACITANCE(pF) 100 10 TJ=100 C 1.0 0.1 TJ=25 C 0.01 TJ=25 C 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE % 10 1 0.1 1 10 100 REVERSE VOLTAGE. (VOLTS) 2 ＧＡＯＭＩ ＸＩＮＧＨＥ ＥＬＥＣＴＲＯＮＩＣＳ ＣＯ．，ＬＴＤ． ＷＷＷ．ＳＤＤＺＧ．ＣＯＭ