PI3020-xx Digital Control and Telemetry Device with SVID Product Description Features & Benefits The PI3020 is a Digital Control and Telemetry (DCT) device with two independent power control outputs. It provides a programmable precision reference, high bandwidth analog error control loop, internal analog compensation, precision current sensing and optional programmed impedance control. Moving the sensitive analog compensation components internal to the PI3020 simplifies system implementation and circuit layout. I2C commands support, telemetry, power sequencing, and system programming. A 12 bit A/D is provided with multiple input options, and an auxiliary 3.1 V, 2.5 V or 1.8 V reference output pin is also provided. The PI3020 includes the proprietary Intel SVID control interface with full support for Server VR13, and backwards compatibility support for Server VR12.5 designs. Internally programmable analog control loop architecture enables high bandwidth linear operation with 3 zero and 6 pole control. The high speed linear control loop enables very fast dynamic response to line and load transients without concerns prevalent in sampled systems. The PI3020 is designed to control power systems with large input to output conversion ratios and allows additional optimization of Factorized Power™ PRM™ + VTM™ systems. The PI3020 also includes an independent control loop with DrMOS compatible PWM output. • I2C Interface for Control or Telemetry • SVID Support for VR13 and VR12.5 • Digitally Programmable Internal Analog Compensation Network • Digitally Programmable Precision Load Line • High Bandwidth Analog Control Path • Output Margining Option • Second Control Loop with DrMOS Compatible PWM Output • 12-Bit A/D for Telemetry and System Monitoring • Auxiliary Reference Output 3.1 V, 2.5 V or 1.8 V • Programmable Power Sequencing Outputs • Programmable Fault Behavior • Input Over/Under Voltage Lockout (OVLO/UVLO) • Output Over Voltage Protection (OVP) • Output Under Voltage Protection (UVP) • Output Over Current Protection (OCP) Typical Application • Over Temperature Protection (OTP) • -40°C to 125°C Operating Range (TJ) 38V-60V PRM VTM TM FLT 5V IOUT EA PI3020 5V VOUT EN Applications • CPU, ASIC and DDR4 Systems • Computing, Communications, LED Lighting • Battery Charging, Solar Array MPPT Package Information Applications Diagram for use within a Factorized Power, CPU or DDR4 Design PI3020 Page 1 of 4 Rev 1.0 03/2016 • 6 mm x 6 mm x 0.9 mm, 48 pin QFN vicorpower.com 800 927.9474 PI3020-xx Order Information Cool-Power RoHS Compliance Package Transport Media PI3020-xx-QCHG Yes 6 mm x 6 mm 48-pin QFN TRAY Pin Description Pin Descriptions for the PI3020 are available with NDA. Contact Vicor for details on obtaining product information. COMPHS VOHS GSHS SWNHS SMOD_N PWM NC43 VR_ENABLE PM_SCL PM_SDA SVID_CLK SVID_DATA Package Pin-Out SVID_ALERT_N V5A PWR_ALERT_N VDR NC3 VREF_OUT V7P5 VPHS VR_READY VSNS12 VR_HOT_N VSNS48 PI3020-00 TOP VIEW THERM ISNS12 CONFIG ISNS48 VRX DGND PM_ADDR0 SGND PM_ADDR1 COMP PAD VR_ADDR IOX Z2 Z1 VSNS_P VSNS_N VDAC_P VDAC_G IOSNS_P IOSNS_N GPIO3 GPIO2 GPIO1 GPIO0 Package Top View 48-Lead QFN (6 mm x 6 mm) I2C is a trademark of NXP Semiconductors. All other trademarks are the property of their respective owners. PI3020 Page 2 of 4 Rev 1.0 03/2016 vicorpower.com 800 927.9474 PI3020-xx Package Drawings [1] All Dimensions are in mm. Angles are in Degrees. Coplanarity applies to the exposed pad as well as the terminals. Coplanarity shall not exceed 0.08 mm. [3] Warpage shall not exceed 0.10 mm. [4] Package Length / Package Width are considered as special characteristic (S). [5] Refer to JEDEC MO-220. [6] Use of NSMD pads is recommended. Refer to IPC-7525 for Stencil design considerations. [2] I2C is a trademark of NXP Semiconductors. All other trademarks are the property of their respective owners. PI3020 Page 3 of 4 Rev 1.0 03/2016 vicorpower.com 800 927.9474 PI3020-xx Vicor’s comprehensive line of power solutions includes high density AC-DC and DC-DC modules and accessory components, fully configurable AC-DC and DC-DC power supplies, and complete custom power systems. Information furnished by Vicor is believed to be accurate and reliable. However, no responsibility is assumed by Vicor for its use. Vicor makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication. Vicor reserves the right to make changes to any products, specifications, and product descriptions at any time without notice. Information published by Vicor has been checked and is believed to be accurate at the time it was printed; however, Vicor assumes no responsibility for inaccuracies. Testing and other quality controls are used to the extent Vicor deems necessary to support Vicor’s product warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. Specifications are subject to change without notice. Vicor’s Standard Terms and Conditions All sales are subject to Vicor’s Standard Terms and Conditions of Sale, which are available on Vicor’s webpage or upon request. Product Warranty In Vicor’s standard terms and conditions of sale, Vicor warrants that its products are free from non-conformity to its Standard Specifications (the “Express Limited Warranty”). This warranty is extended only to the original Buyer for the period expiring two (2) years after the date of shipment and is not transferable. UNLESS OTHERWISE EXPRESSLY STATED IN A WRITTEN SALES AGREEMENT SIGNED BY A DULY AUTHORIZED VICOR SIGNATORY, VICOR DISCLAIMS ALL REPRESENTATIONS, LIABILITIES, AND WARRANTIES OF ANY KIND (WHETHER ARISING BY IMPLICATION OR BY OPERATION OF LAW) WITH RESPECT TO THE PRODUCTS, INCLUDING, WITHOUT LIMITATION, ANY WARRANTIES OR REPRESENTATIONS AS TO MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSE, INFRINGEMENT OF ANY PATENT, COPYRIGHT, OR OTHER INTELLECTUAL PROPERTY RIGHT, OR ANY OTHER MATTER. This warranty does not extend to products subjected to misuse, accident, or improper application, maintenance, or storage. Vicor shall not be liable for collateral or consequential damage. Vicor disclaims any and all liability arising out of the application or use of any product or circuit and assumes no liability for applications assistance or buyer product design. Buyers are responsible for their products and applications using Vicor products and components. Prior to using or distributing any products that include Vicor components, buyers should provide adequate design, testing and operating safeguards. Vicor will repair or replace defective products in accordance with its own best judgment. For service under this warranty, the buyer must contact Vicor to obtain a Return Material Authorization (RMA) number and shipping instructions. Products returned without prior authorization will be returned to the buyer. The buyer will pay all charges incurred in returning the product to the factory. Vicor will pay all reshipment charges if the product was defective within the terms of this warranty. Life Support Policy VICOR’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS PRIOR WRITTEN APPROVAL OF THE CHIEF EXECUTIVE OFFICER AND GENERAL COUNSEL OF VICOR CORPORATION. As used herein, life support devices or systems are devices which (a) are intended for surgical implant into the body, or (b) support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in a significant injury to the user. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system or to affect its safety or effectiveness. Per Vicor Terms and Conditions of Sale, the user of Vicor products and components in life support applications assumes all risks of such use and indemnifies Vicor against all liability and damages. Intellectual Property Notice Vicor and its subsidiaries own Intellectual Property (including issued U.S. and Foreign Patents and pending patent applications) relating to the products described in this data sheet. No license, whether express, implied, or arising by estoppel or otherwise, to any intellectual property rights is granted by this document. Interested parties should contact Vicor’s Intellectual Property Department. Vicor Corporation 25 Frontage Road Andover, MA 01810 USA Picor Corporation 51 Industrial Drive North Smithfield, RI 02896 USA email Customer Service: [email protected] Technical Support: [email protected] PI3020 Page 4 of 4 Rev 1.0 03/2016 vicorpower.com 800 927.9474