T55 Datasheet

T55
www.vishay.com
Vishay Polytech
vPolyTanTM Solid Tantalum Surface Mount Chip Capacitors,
Molded Case, High Performance Polymer Type
FEATURES
• Ultra-low ESR
• Molded case available in 7 case codes
• Terminations:
cases J, P: 100 % tin
case A: 100 % tin or Ni / Pd / Au
cases T, B, V, D: Ni / Pd / Au
• Compatible with “high volume” automatic pick
and place equipment
• Moisture sensitivity level 3
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
PERFORMANCE / ELECTRICAL
CHARACTERISTICS
APPLICATIONS
Operating Temperature: -55 °C to +105 °C
Capacitance Range: 3.3 μF to 680 μF
Capacitance Tolerance: ± 20 %
Voltage Rating: 2.5 VDC to 35 VDC
•
•
•
•
•
•
Decoupling, smoothing, filtering
Bulk energy storage in wireless cards
Infrastructure equipment
Storage and networking
Computer motherboards
Smartphones and tablets
ORDERING INFORMATION
T55
B
156
M
6R3
C
0500
TYPE
CASE
CODE
CAPACITANCE
CAPACITANCE
TOLERANCE
DC VOLTAGE
RATING
TERMINATION /
PACKAGING
ESR
See
Ratings
and
Case
Codes
table
This is expressed in
picofarads. The first
two digits are the
significant figures.
The third is the
number of zeros
to follow.
M = ± 20 %
2R5 = 2.5 V
004 = 4 V
6R3 = 6.3 V
010 = 10 V
12R = 12.5 V
016 = 16 V
020 = 20 V
025 = 25 V
035 = 35 V
C = lead (Pb)-free
solderable coating,
7" reel
Maximum
100 kHz ESR
in m
DIMENSIONS in inches [millimeters]
P case
J case
Anode indication belt mark
Anode indication belt mark
L
W
W
W
H
a
l
Revision: 02-Jun-16
L
W
l
H
a
l
l
Document Number: 40174
1
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
T55
www.vishay.com
Vishay Polytech
DIMENSIONS in inches [millimeters]
D, V case
A, B, T case
Anode indication belt mark
H
L
l
a
W
l
l
W
l
a
H
a
L
CASE CODE
EIA SIZE
L
W
H
l
a
J
1608-09
0.063 ± 0.004
[1.6 ± 0.1]
0.031 ± 0.004
[0.8 ± 0.1]
0.031 ± 0.004
[0.8 ± 0.1]
0.012 ± 0.006
[0.3 ± 0.15]
0.024 ± 0.004
[0.6 ± 0.1]
P
2012-12
0.080 ± 0.008
[2.0 ± 0.2]
0.049 ± 0.008
[1.25 ± 0.2]
0.047 max.
[1.2 max.]
0.020 ± 0.008
[0.5 ± 0.2]
0.035 ± 0.004
[0.9 ± 0.1]
A
3216-18
0.126 ± 0.008
[3.2 ± 0.2]
0.063 ± 0.008
[1.6 ± 0.2]
0.063 ± 0.008
[1.6 ± 0.2]
0.028 ± 0.012
[0.7 ± 0.3]
0.047 ± 0.008
[1.2 ± 0.2]
T
3528-12
0.138 ± 0.008
[3.5 ± 0.2]
0.110 ± 0.008
[2.8 ± 0.2]
0.047 max.
[1.2 max.]
0.030 ± 0.012
[0.8 ± 0.3]
0.087 ± 0.008
[2.2 ± 0.2]
B
3528-21
0.138 ± 0.008
[3.5 ± 0.2]
0.110 ± 0.008
[2.8 ± 0.2]
0.075 ± 0.008
[1.9 ± 0.2]
0.030 ± 0.012
[0.8 ± 0.3]
0.087 ± 0.008
[2.2 ± 0.2]
V
7343-20
0.287 ± 0.008
[7.3 ± 0.2]
0.169 ± 0.012
[4.3 ± 0.3]
0.075 ± 0.004
[1.9 ± 0.1]
0.051 ± 0.012
[1.3 ± 0.3]
0.094 ± 0.008
[2.4 ± 0.2]
D
7343-30
0.287 ± 0.008
[7.3 ± 0.2]
0.169 ± 0.012
[4.3 ± 0.3]
0.110 ± 0.008
[2.8 ± 0.2]
0.051 ± 0.012
[1.3 ± 0.3]
0.094 ± 0.008
[2.4 ± 0.2]
RATINGS AND CASE CODES
μF
2.5 V
4.0 V
6.3 V
10 V
12.5 V
16 V
20 V
25 V
35 V
B
3.3
J/P
J/P
4.7
J/P/A
P/A
6.8
P/A
A
B
B
B
B
10
J/P/A
P/A
A
15
P/A
A
A
T (1)
B
22
A
A/B
A/T/B
A/T/B
B
33
A
A/B
A/T/B
A/T/B
V
47
A
A/T/B
A/T/B
B
V
68
A/B
A/T/B
T/B
V
100
A/T/B
A/T/B
A/T/B/V
V/D
150
B
B/V
B/V
V
220
B/V
B/V/D
B/V/D
V/D
330
B/V
D/V
V/D
D
470
B/D
680
D
V
(1)
V
B
B (1)
D (1)
D (1)
D
/D
D
Note
(1) In development.
Revision: 02-Jun-16
Document Number: 40174
2
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
T55
www.vishay.com
Vishay Polytech
MARKING
T, B, V, D case
A case
Simplified code of nominal
capacitance (A7: 10 μF)
Date code
Anode indication belt mark
Anode indication belt mark
NA
JS7
Type of series
(N: T55)
A7JA
+
+
Date code
Simplified code of rated
voltage (J: 6.3 V)
Simplified code of
rated voltage (J: 6.3 V)
VOLTAGE CODE
Simplified code of
nominal capacitance (S7: 47 μF)
CAPACITANCE CODE
V
2.5
4
6.3
10
12.5
16
20
25
35
CODE
e
G
J
A
B
C
D
E
V
CAP, μF
3.3
4.7
6.8
10
15
22
33
47
68
100
150
220
330
470
680
CODE
N6
S6
W6
A7
E7
J7
N7
S7
W7
A8
E8
J8
N8
S8
W8
J, P case
Anode indication belt mark
Simplified code of nominal
capacitance (S: 4.7 μF)
SJ
+
Simplified code of rated
voltage (J: 6.3 V)
RATED VOLTAGE
4
4
6.3
6.3
6.3
6.3
10
10
CAPACITANCE
10
15
3.3
4.7
6.8
10
3.3
4.7
MARKING
AG
EG
NJ
SJ
WJ
AJ
NA
SA
DATE CODE
YEAR
2013
2014
2015
2016
MONTH
1
A
N
a
n
Revision: 02-Jun-16
2
B
P
b
p
3
C
Q
c
q
4
D
R
d
r
5
E
S
e
s
6
F
T
f
t
7
G
U
g
u
8
H
V
h
v
9
J
W
j
w
10
K
X
k
x
11
L
Y
l
y
12
M
Z
m
z
Document Number: 40174
3
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
T55
www.vishay.com
Vishay Polytech
STANDARD RATINGS
CAPACITANCE
(μF)
CASE CODE
22
22
33
33
47
47
68
68
68
100
100
100
100
100
150
150
220
220
220
220
220
220
220
220
330
330
330
330
330
330
330
330
470
470
470
470
A
A
A
A
A
A
A
A
B
A
A
T
B
B
B
B
B
B
B
B
B
V
V (1)
V (1)
B
B
B
B
V
V
V (1)
V (1)
B
D
D
D
10
10
10
10
10
10
15
15
15
15
15
J
P
P
P
A
A
P
P
A
A
A
PART NUMBER
MAX. DCL
AT 25 °C
(μA)
2.5 VDC AT +105 °C
T55A226M2R5C0200
5.5
T55A226M2R5C0180
5.5
T55A336M2R5C0200
8.2
T55A336M2R5C0180
8.2
T55A476M2R5C0200
11.7
T55A476M2R5C0180
11.7
T55A686M2R5C0250
17.0
T55A686M2R5C0200
17.0
T55B686M2R5C0070
17.0
T55A107M2R5C0200
25.0
T55A107M2R5C0100
25.0
T55T107M2R5C0070
25.0
T55B107M2R5C0070
25.0
T55B107M2R5C0055
25.0
T55B157M2R5C0070
37.5
T55B157M2R5C0055
37.5
T55B227M2R5C0070
55.0
T55B227M2R5C0055
55.0
T55B227M2R5C0045
55.0
T55B227M2R5C0035
55.0
T55B227M2R5C0030
55.0
T55V227M2R5C0025
55.0
T55V227M2R5C0018
55.0
T55V227M2R5C0015
55.0
T55B337M2R5C0070
82.5
T55B337M2R5C0045
82.5
T55B337M2R5C0035
82.5
T55B337M2R5C0025
82.5
T55V337M2R5C0040
82.5
T55V337M2R5C0025
82.5
T55V337M2R5C0018
82.5
T55V337M2R5C0015
82.5
T55B477M2R5C0025
117.5
T55D477M2R5C0050
117.5
T55D477M2R5C0040
117.5
T55D477M2R5C0025
117.5
4 VDC AT +105 °C
T55J106M004C0500
10.0
T55P106M004C0500
5.0
T55P106M004C0300
5.0
T55P106M004C0200
5.0
T55A106M004C0500
4.0
T55A106M004C0200
4.0
T55P156M004C0500
10.0
T55P156M004C0200
10.0
T55A156M004C0500
6.0
T55A156M004C0300
6.0
T55A156M004C0200
6.0
MAX. DF
AT 25 °C
120 Hz
(%)
MAX. ESR
AT + 25 °C
100 kHz
(m)
MAX. RIPPLE, AT 45 °C
100 kHz IRMS
(A)
10
10
10
10
10
10
10
10
8
10
10
10
8
8
8
8
8
8
8
8
8
10
10
10
8
8
8
8
10
10
10
10
8
10
10
10
200
180
200
180
200
180
250
200
70
200
100
70
70
55
70
55
70
55
45
35
30
25
18
15
70
45
35
25
40
25
18
15
25
50
40
25
0.75
0.79
0.75
0.79
0.75
0.79
0.67
0.75
1.36
0.75
1.07
1.22
1.36
1.53
1.36
1.53
1.36
1.53
1.69
1.93
2.08
2.73
3.22
3.53
1.36
1.70
1.93
2.28
2.16
2.73
3.22
3.53
2.28
2.12
2.37
3.00
10
10
10
10
10
10
10
10
10
10
10
500
500
300
200
500
200
500
200
500
300
200
0.32
0.36
0.46
0.56
0.48
0.76
0.36
0.56
0.48
0.61
0.76
Notes
• Termination code “C”: cases J, P: 100 % tin, case A: 100 % tin or Ni/Pd/Au, cases T, B, V, D: Ni/Pd/Au.
(1) In development.
Revision: 02-Jun-16
Document Number: 40174
4
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
T55
www.vishay.com
Vishay Polytech
STANDARD RATINGS
CAPACITANCE
(μF)
CASE CODE
22
22
22
22
22
33
33
33
33
47
47
47
47
47
47
47
47
68
68
68
68
68
68
68
68
68
100
100
100
100
100
100
100
100
100
150
150
150
150
150
150
150
150
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
A
A
A
B
B
A
A
A
B
A
A
A
T
T
T
B
B
A
A
A
T
T
T
T
B
B
A
A
T
T
B
B
B
B
B
B
B
B
B
B
V
V
V
B
B
B
B
B
V
V
V
V
V
V
V
D
D
D
PART NUMBER
MAX. DCL
AT 25 °C
(μA)
4 VDC AT +105 °C
T55A226M004C0500
8.8
T55A226M004C0300
8.8
T55A226M004C0200
8.8
T55B226M004C0150
8.8
T55B226M004C0200
8.8
T55A336M004C0500
13.2
T55A336M004C0300
13.2
T55A336M004C0200
13.2
T55B336M004C0200
13.2
T55A476M004C0500
18.8
T55A476M004C0200
18.8
T55A476M004C0180
18.8
T55T476M004C0200
18.8
T55T476M004C0080
18.8
T55T476M004C0070
18.8
T55B476M004C0150
18.8
T55B476M004C0070
18.8
T55A686M004C0500
27.2
T55A686M004C0250
27.2
T55A686M004C0200
27.2
T55T686M004C0200
27.2
T55T686M004C0180
27.2
T55T686M004C0080
27.2
T55T686M004C0070
27.2
T55B686M004C0150
27.2
T55B686M004C0070
27.2
T55A107M004C0200
40.0
T55A107M004C0100
40.0
T55T107M004C0150
40.0
T55T107M004C0070
40.0
T55B107M004C0070
40.0
T55B107M004C0055
40.0
T55B107M004C0045
40.0
T55B107M004C0040
40.0
T55B107M004C0035
40.0
T55B157M004C0070
60.0
T55B157M004C0055
60.0
T55B157M004C0045
60.0
T55B157M004C0040
60.0
T55B157M004C0035
60.0
T55V157M004C0045
60.0
T55V157M004C0025
60.0
T55V157M004C0015
60.0
T55B227M004C0070
88.0
T55B227M004C0060
88.0
T55B227M004C0055
88.0
T55B227M004C0045
88.0
T55B227M004C0035
88.0
T55V227M004C0055
88.0
T55V227M004C0045
88.0
T55V227M004C0040
88.0
T55V227M004C0035
88.0
T55V227M004C0025
88.0
T55V227M004C0018
88.0
T55V227M004C0015
88.0
T55D227M004C0055
88.0
T55D227M004C0040
88.0
T55D227M004C0025
88.0
MAX. DF
AT 25 °C
120 Hz
(%)
MAX. ESR
AT + 25 °C
100 kHz
(m)
MAX. RIPPLE, AT 45 °C
100 kHz IRMS
(A)
10
10
10
8
8
10
10
10
8
10
10
10
10
10
10
8
8
10
10
10
10
10
10
10
8
8
10
10
10
10
8
8
8
8
8
8
8
8
8
8
10
10
10
8
8
8
8
8
10
10
10
10
10
10
10
10
10
10
500
300
200
150
200
500
300
200
200
500
200
180
200
80
70
150
70
500
250
200
200
180
80
70
150
70
200
100
150
70
70
55
45
40
35
70
55
45
40
35
45
25
15
70
60
55
45
35
55
45
40
35
25
18
15
55
40
25
0.48
0.61
0.76
0.93
0.81
0.48
0.61
0.76
0.81
0.48
0.76
0.79
0.72
1.15
1.22
0.93
1.36
0.48
0.67
0.76
0.72
0.76
1.15
1.22
0.93
1.36
0.75
1.07
0.84
1.22
1.36
1.53
1.70
1.80
1.92
1.36
1.53
1.69
1.80
1.93
2.03
2.73
3.53
1.36
1.47
1.53
1.70
1.93
1.84
2.03
2.16
2.31
2.73
3.22
3.53
2.02
2.37
3.00
Notes
• Termination code “C”: cases J, P: 100 % tin, case A: 100 % tin or Ni/Pd/Au, cases T, B, V, D: Ni/Pd/Au.
(1) In development.
Revision: 02-Jun-16
Document Number: 40174
5
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
T55
www.vishay.com
Vishay Polytech
STANDARD RATINGS
CAPACITANCE
(μF)
CASE CODE
330
330
330
330
330
330
330
330
330
330
470
470
470
470
470
470
680
680
680
V
V
V
V
V
V
D
D
D
D
D
D
D
D
D
D
D
D
D
3.3
3.3
4.7
4.7
4.7
6.8
6.8
10
10
10
10
10
15
15
15
22
22
22
22
22
22
33
33
33
33
33
33
33
33
33
33
33
J
P
J
P
A
P
A
P
P
A
A
A
A
A
A
A
A
A
T
T
B
A
A
A
T
T
T
B
B
B
B
B
PART NUMBER
MAX. DCL
AT 25 °C
(μA)
4 VDC AT +105 °C
T55V337M004C0050
132.0
T55V337M004C0045
132.0
T55V337M004C0040
132.0
T55V337M004C0025
132.0
T55V337M004C0018
132.0
T55V337M004C0015
132.0
T55D337M004C0050
132.0
T55D337M004C0040
132.0
T55D337M004C0025
132.0
T55D337M004C0015
132.0
T55D477M004C0055
188.0
T55D477M004C0050
188.0
T55D477M004C0040
188.0
T55D477M004C0025
188.0
T55D477M004C0018
188.0
T55D477M004C0015
188.0
T55D687M004C0025
272.0
T55D687M004C0018
272.0
T55D687M004C0015
272.0
6.3 VDC AT +105 °C
T55J335M6R3C0500
10.0
T55P335M6R3C0500
5.0
T55J475M6R3C0500
10.0
T55P475M6R3C0500
5.0
T55A475M6R3C0500
3.0
T55P685M6R3C0500
5.0
T55A685M6R3C0500
4.2
T55P106M6R3C0500
10.0
T55P106M6R3C0200
10.0
T55A106M6R3C0500
6.3
T55A106M6R3C0300
6.3
T55A106M6R3C0200
6.3
T55A156M6R3C0500
9.4
T55A156M6R3C0300
9.4
T55A156M6R3C0200
9.4
T55A226M6R3C0500
13.8
T55A226M6R3C0300
13.8
T55A226M6R3C0200
13.8
T55T226M6R3C0150
13.8
T55T226M6R3C0070
13.8
T55B226M6R3C0150
13.8
T55A336M6R3C0500
20.7
T55A336M6R3C0200
20.7
T55A336M6R3C0180
20.7
T55T336M6R3C0200
20.7
T55T336M6R3C0150
20.7
T55T336M6R3C0070
20.7
T55B336M6R3C0200
20.7
T55B336M6R3C0150
20.7
T55B336M6R3C0080
20.7
T55B336M6R3C0070
20.7
T55B336M6R3C0040
20.7
MAX. DF
AT 25 °C
120 Hz
(%)
MAX. ESR
AT + 25 °C
100 kHz
(m)
MAX. RIPPLE, AT 45 °C
100 kHz IRMS
(A)
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
50
45
40
25
18
15
50
40
25
15
55
50
40
25
18
15
25
18
15
1.93
2.03
2.16
2.73
3.22
3.53
2.12
2.37
3.00
3.87
2.02
2.12
2.37
3.00
3.53
3.87
3.00
3.53
3.87
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
8
10
10
10
10
10
10
8
8
8
8
8
500
500
500
500
500
500
500
500
200
500
300
200
500
300
200
500
300
200
150
70
150
500
200
180
200
150
70
200
150
80
70
40
0.32
0.36
0.32
0.36
0.48
0.36
0.48
0.36
0.56
0.48
0.61
0.76
0.48
0.61
0.76
0.48
0.61
0.76
0.84
1.22
0.93
0.48
0.76
0.79
0.72
0.84
1.22
0.81
0.93
1.27
1.36
1.80
Notes
• Termination code “C”: cases J, P: 100 % tin, case A: 100 % tin or Ni/Pd/Au, cases T, B, V, D: Ni/Pd/Au.
(1) In development.
Revision: 02-Jun-16
Document Number: 40174
6
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
T55
www.vishay.com
Vishay Polytech
STANDARD RATINGS
CAPACITANCE
(μF)
CASE CODE
PART NUMBER
47
47
47
47
47
47
47
47
47
47
47
47
47
47
68
68
68
68
68
100
100
100
100
100
100
100
100
100
100
100
100
100
100
150
150
150
150
150
150
150
150
150
150
150
150
150
A
A
A
A
A
A
T
T
T
T
B
B
B
B
T
T
T
B
B
A
A
A
A
A (1)
T
T
B
B
B
B
B
B
V
B
B
B
B
B
B
B (1)
V
V
V
V
V
V
T55A476M6R3C0500
T55A476M6R3C0200
T55A476M6R3C0180
T55A476M6R3C0150
T55A476M6R3C0100
T55A476M6R3C0070
T55T476M6R3C0200
T55T476M6R3C0120
T55T476M6R3C0080
T55T476M6R3C0070
T55B476M6R3C0150
T55B476M6R3C0070
T55B476M6R3C0060
T55B476M6R3C0040
T55T686M6R3C0200
T55T686M6R3C0150
T55T686M6R3C0070
T55B686M6R3C0150
T55B686M6R3C0070
T55A107M6R3C0200
T55A107M6R3C0150
T55A107M6R3C0100
T55A107M6R3C0070
T55A107M6R3C0045
T55T107M6R3C0200
T55T107M6R3C0070
T55B107M6R3C0100
T55B107M6R3C0070
T55B107M6R3C0055
T55B107M6R3C0045
T55B107M6R3C0040
T55B107M6R3C0035
T55V107M6R3C0045
T55B157M6R3C0100
T55B157M6R3C0070
T55B157M6R3C0055
T55B157M6R3C0045
T55B157M6R3C0040
T55B157M6R3C0035
T55B157M6R3C0025
T55V157M6R3C0055
T55V157M6R3C0045
T55V157M6R3C0040
T55V157M6R3C0035
T55V157M6R3C0025
T55V157M6R3C0018
MAX. DCL
AT 25 °C
(μA)
MAX. DF
AT 25 °C
120 Hz
(%)
MAX. ESR
AT + 25 °C
100 kHz
(m)
MAX. RIPPLE, AT 45 °C
100 kHz IRMS
(A)
10
10
10
10
10
10
10
10
10
10
8
8
8
8
10
10
10
8
8
10
10
10
10
10
10
10
8
8
8
8
8
8
10
8
8
8
8
8
8
8
10
10
10
10
10
10
500
200
180
150
100
70
200
120
80
70
150
70
60
40
200
150
70
150
70
200
150
100
70
45
200
70
100
70
55
45
40
35
45
100
70
55
45
40
35
25
55
45
40
35
25
18
0.48
0.76
0.79
0.88
1.07
1.28
0.72
0.93
1.15
1.22
0.93
1.36
1.47
1.80
0.72
0.83
1.22
0.93
1.36
0.76
0.88
1.07
1.28
1.59
0.72
1.22
1.14
1.36
1.53
1.70
1.80
1.93
2.03
1.14
1.36
1.53
1.70
1.80
1.93
2.28
1.84
2.03
2.16
2.31
2.73
3.22
6.3 VDC AT +105 °C
29.6
29.6
29.6
29.6
29.6
29.6
29.6
29.6
29.6
29.6
29.6
29.6
29.6
29.6
42.8
42.8
42.8
42.8
42.8
63.0
63.0
63.0
63.0
63.0
63.0
63.0
63.0
63.0
63.0
63.0
63.0
63.0
63.0
94.5
94.5
94.5
94.5
94.5
94.5
94.5
94.5
94.5
94.5
94.5
94.5
94.5
Notes
• Termination code “C”: cases J, P: 100 % tin, case A: 100 % tin or Ni/Pd/Au, cases T, B, V, D: Ni/Pd/Au.
(1) In development.
Revision: 02-Jun-16
Document Number: 40174
7
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
T55
www.vishay.com
Vishay Polytech
STANDARD RATINGS
CAPACITANCE
(μF)
CASE CODE
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
220
330
330
330
330
330
330
330
330
330
330
330
330
330
330
470
470
470
470
470
B
B
B
B
B
V
V
V
V
V
V
V
D
D
D
D
D
V
V
V
V
V
V
D
D
D
D
D
D
D
D
V (1)
V (1)
D
D
D
3.3
3.3
4.7
4.7
4.7
4.7
4.7
6.8
6.8
6.8
10
10
10
15
15
J
P
P
P
A
A
A
A
A
A
A
A
A
A
A
PART NUMBER
MAX. DCL
AT 25 °C
(μA)
6.3 VDC AT +105 °C
T55B227M6R3C0200
138.6
T55B227M6R3C0070
138.6
T55B227M6R3C0045
138.6
T55B227M6R3C0035
138.6
T55B227M6R3C0025
138.6
T55V227M6R3C0050
138.6
T55V227M6R3C0045
138.6
T55V227M6R3C0040
138.6
T55V227M6R3C0035
138.6
T55V227M6R3C0025
138.6
T55V227M6R3C0018
138.6
T55V227M6R3C0015
138.6
T55D227M6R3C0055
138.6
T55D227M6R3C0050
138.6
T55D227M6R3C0040
138.6
T55D227M6R3C0035
138.6
T55D227M6R3C0025
138.6
T55V337M6R3C0050
207.9
T55V337M6R3C0045
207.9
T55V337M6R3C0040
207.9
T55V337M6R3C0025
207.9
T55V337M6R3C0018
207.9
T55V337M6R3C0015
207.9
T55D337M6R3C0055
207.9
T55D337M6R3C0050
207.9
T55D337M6R3C0045
207.9
T55D337M6R3C0040
207.9
T55D337M6R3C0025
207.9
T55D337M6R3C0018
207.9
T55D337M6R3C0015
207.9
T55D337M6R3C0012
207.9
T55V477M6R3C0055
296.1
T55V477M6R3C0050
296.1
T55D477M6R3C0030
296.1
T55D477M6R3C0025
296.1
T55D477M6R3C0015
296.1
10 VDC AT +105 °C
T55J335M010C0500
10.0
T55P335M010C0500
5.0
T55P475M010C0500
10.0
T55P475M010C0200
10.0
T55A475M010C0500
4.7
T55A475M010C0300
4.7
T55A475M010C0200
4.7
T55A685M010C0500
6.8
T55A685M010C0300
6.8
T55A685M010C0200
6.8
T55A106M010C0500
10.0
T55A106M010C0300
10.0
T55A106M010C0200
10.0
T55A156M010C0500
15.0
T55A156M010C0200
15.0
MAX. DF
AT 25 °C
120 Hz
(%)
MAX. ESR
AT + 25 °C
100 kHz
(m)
MAX. RIPPLE, AT 45 °C
100 kHz IRMS
(A)
8
8
8
8
8
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
200
70
45
35
25
50
45
40
35
25
18
15
55
50
40
35
25
50
45
40
25
18
15
55
50
45
40
25
18
15
12
55
50
30
25
15
0.80
1.36
1.69
1.93
2.28
1.93
2.03
2.16
2.31
2.73
3.22
3.53
2.02
2.12
2.37
2.53
3.00
1.93
2.03
2.16
2.73
3.22
3.53
2.02
2.12
2.23
2.37
3.00
3.53
3.87
4.33
1.84
1.93
2.73
3.00
3.87
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
500
500
500
200
500
300
200
500
300
200
500
300
200
500
200
0.32
0.36
0.36
0.56
0.48
0.61
0.76
0.48
0.61
0.76
0.48
0.61
0.76
0.48
0.76
Notes
• Termination code “C”: cases J, P: 100 % tin, case A: 100 % tin or Ni/Pd/Au, cases T, B, V, D: Ni/Pd/Au.
(1) In development.
Revision: 02-Jun-16
Document Number: 40174
8
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
T55
www.vishay.com
Vishay Polytech
STANDARD RATINGS
CAPACITANCE
(μF)
CASE CODE
22
22
22
22
22
22
22
22
22
33
33
33
33
33
33
33
33
33
33
33
33
33
47
47
68
68
100
100
100
100
100
100
150
150
150
150
150
220
220
220
220
220
220
220
220
220
220
330
330
330
330
A
A
T
T
T
B
B
B
B
A
A
A
A
T
T
T
T
T (1)
B
B
B
B
B
B
V
V
V
D
D
D
D
D
V
V
V
V
V
V
V
V
V
V
D
D
D
D
D
D
D
D
D
PART NUMBER
MAX. DCL
AT 25 °C
(μA)
10 VDC AT +105 °C
T55A226M010C0500
22.0
T55A226M010C0200
22.0
T55T226M010C0200
22.0
T55T226M010C0150
22.0
T55T226M010C0070
22.0
T55B226M010C0300
22.0
T55B226M010C0200
22.0
T55B226M010C0150
22.0
T55B226M010C0070
22.0
T55A336M010C0500
33.0
T55A336M010C0150
33.0
T55A336M010C0070
33.0
T55A336M010C0200
33.0
T55T336M010C0200
33.0
T55T336M010C0150
33.0
T55T336M010C0080
33.0
T55T336M010C0070
33.0
T55T336M010C0040
33.0
T55B336M010C0200
33.0
T55B336M010C0150
33.0
T55B336M010C0080
33.0
T55B336M010C0070
33.0
T55B476M010C0150
47.0
T55B476M010C0070
47.0
T55V686M010C0100
68.0
T55V686M010C0060
68.0
T55V107M010C0045
100.0
T55D107M010C0080
100.0
T55D107M010C0055
100.0
T55D107M010C0045
100.0
T55D107M010C0025
100.0
T55D107M010C0018
100.0
T55V157M010C0055
150.0
T55V157M010C0045
150.0
T55V157M010C0040
150.0
T55V157M010C0025
150.0
T55V157M010C0015
150.0
T55V227M010C0050
220.0
T55V227M010C0045
220.0
T55V227M010C0040
220.0
T55V227M010C0025
220.0
T55V227M010C0018
220.0
T55D227M010C0055
220.0
T55D227M010C0050
220.0
T55D227M010C0040
220.0
T55D227M010C0025
220.0
T55D227M010C0018
220.0
T55D337M010C0040
330.0
T55D337M010C0035
330.0
T55D337M010C0025
330.0
T55D337M010C0018
330.0
MAX. DF
AT 25 °C
120 Hz
(%)
MAX. ESR
AT + 25 °C
100 kHz
(m)
MAX. RIPPLE, AT 45 °C
100 kHz IRMS
(A)
10
10
10
10
10
8
8
8
8
10
10
10
10
10
10
10
10
8
8
8
8
8
8
8
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
500
200
200
150
70
300
200
150
70
500
150
70
200
200
150
80
70
40
200
150
80
70
150
70
100
60
45
80
55
45
25
18
55
45
40
25
15
50
45
40
25
18
55
50
40
25
18
40
35
25
18
0.48
0.76
0.72
0.84
1.22
0.66
0.81
0.93
1.36
0.48
0.88
1.28
0.76
0.72
0.84
1.14
1.22
1.62
0.81
0.93
1.27
1.36
0.93
1.36
1.36
1.76
2.03
1.67
2.02
2.23
3.00
3.53
1.84
2.03
2.16
2.73
3.53
1.93
2.03
2.16
2.73
3.22
2.02
2.12
2.37
3.00
3.53
2.37
2.53
3.00
3.53
Notes
• Termination code “C”: cases J, P: 100 % tin, case A: 100 % tin or Ni/Pd/Au, cases T, B, V, D: Ni/Pd/Au.
(1) In development.
Revision: 02-Jun-16
Document Number: 40174
9
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
T55
www.vishay.com
Vishay Polytech
STANDARD RATINGS
CAPACITANCE
(μF)
CASE CODE
PART NUMBER
15
T (1)
T55T156M12RC0080
MAX. DCL
AT 25 °C
(μA)
MAX. DF
AT 25 °C
120 Hz
(%)
MAX. ESR
AT + 25 °C
100 kHz
(m)
MAX. RIPPLE, AT 45 °C
100 kHz IRMS
(A)
8
80
1.14
8
8
8
8
8
8
8
10
10
10
10
200
200
100
150
90
150
70
70
70
45
50
0.80
0.80
1.14
0.93
1.20
0.93
1.36
1.63
1.63
2.03
1.93
8
8
90
70
1.20
1.36
8
8
8
8
10
10
100
150
100
100
60
60
1.14
0.93
1.14
1.14
1.93
1.93
8
10
200
120
0.81
1.36
12.5 VDC AT +105 °C
6.8
10
10
15
15
22
22
33
47
47
100
B
B
B
B
B
B
B
V
V
V
V
15
15
B
B
6.8
10
10
15
33
100
B
B
B
B (1)
D (1)
D
6.8
22
B
D (1)
18.7
16 VDC AT +105 °C
T55B685M016C0200
10.8
T55B106M016C0200
16.0
T55B106M016C0100
16.0
T55B156M016C0150
24.0
T55B156M016C0090
24.0
T55B226M016C0150
35.2
T55B226M016C0070
35.2
T55V336M016C0070
52.8
T55V476M016C0070
75.2
T55V476M016C0045
75.2
T55V107M016C0050
160.0
20 VDC AT +105 °C
T55B156M020C0090
30.0
T55B156M020C0070
30.0
25 VDC AT +105 °C
T55B685M025C0100
17.0
T55B106M025C0150
25.0
T55B106M025C0100
25.0
T55B156M025C0100
37.5
T55D336M025C0060
82.5
T55D107M025C0060
250.0
35 VDC AT +105 °C
T55B685M035C0200
23.8
T55D226M035C0120
77.0
Notes
• Termination code “C”: cases J, P: 100 % tin, case A: 100 % tin or Ni/Pd/Au, cases T, B, V, D: Ni/Pd/Au.
(1) In development.
RECOMMENDED VOLTAGE DERATING GUIDELINES
CAPACITOR VOLTAGE RATING
2.5
4.0
6.3
10
12.5
16
20
25
35
OPERATING VOLTAGE
2.3
3.6
5.7
9.0
11.2
12.8
16
20
28
POWER DISSIPATION
CASE CODE
J
P
A
T
B
V
D
Revision: 02-Jun-16
MAXIMUM PERMISSIBLE POWER DISSIPATION (W) AT  +45 °C IN FREE AIR
0.050
0.064
0.115
0.105
0.130
0.187
0.225
Document Number: 40174
10
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
T55
www.vishay.com
Vishay Polytech
STANDARD PACKAGING QUANTITY
CASE CODE
UNITS PER 7" REEL
J
4000
P
3000
A
2000
T
3000
B
2000
V
800
D
500
PERFORMANCE CHARACTERISTICS
ITEM
Temperature
characteristics
CONDITION
Measure the specified
characteristics in each stage
POST TEST PERFORMANCE
Specified
initial value
-55 °C
+105 °C
Capacitance change
-
-20 % to 0 %
0 % to 30 %
Dissipation factor
shown in Standard
Ratings table or less
8 to 10
14
-
Refer to
Standard
Ratings
table
-
Not more than
1 CV or 30 μA
which is greater
Leakage current
105 °C, 1000 successive test cycles in series with
Capacitance change Within ± 20 % of initial value
a 1 k resistor at the rate of 30 s ON,
30 s OFF; test voltage per table below:
Surge voltage
Rated
2.5
voltage
4
6.3 10 12.5 16 20 25 35 Dissipation factor
Surge
3.2 5.2 8.2 13 16 20 23 29 40 Leakage current
voltage
Solder heat
resistance
Moisture
resistance
no load
Reflow board surface peak temperature:
less than 260 °C
Time: 5 s max.
Within initial limit
Shall not exceed 300 % of initial limit
Capacitance change Within ± 20 % of initial value
Dissipation factor
Initial specified value or less
Leakage current
Shall not exceed 300 % of initial specified value
VR  4 V
Relative to the value before test
+50 % to -20 %
VR  6.3 V
Relative to the value before test
+40 % to -20 %
Capacitance change
Leave at 60 °C and 90 % RH for 500 h
Dissipation factor
Initial specified value or less
Leakage current
Shall not exceed 300 % of initial specified value
Capacitance change Within ± 20 % of initial value
High temperature 105 °C. The rated voltage is applied through a
load
protective resistor of 3  for 1000 h
Thermal shock
Leave at -55 °C, normal temperature, 105 °C,
and normal temperature for 30 min., 15 min. 30
min., and 15 min.
Repeat this operation 5 times running.
Failure rate
105 °C. The rated voltage is applied through
a protective resistor of 1 /V.
Dissipation factor
Initial specified value or less
Leakage current
Shall not exceed 300 % of initial specified value
Capacitance change Within ± 20 % of initial value or less
Dissipation factor
Initial specified value or less
Leakage current
Shall not exceed 300 % of initial specified value
1 % / 1000 h
Note
• Test conditions per JIS C5101-1
Revision: 02-Jun-16
Document Number: 40174
11
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Polymer Guide
www.vishay.com
Vishay
Guide for Tantalum Solid Electrolyte Chip Capacitors
with Polymer Cathode
INTRODUCTION
Tantalum electrolytic capacitors are the preferred choice in
applications where volumetric efficiency, stable electrical
parameters, high reliability, and long service life are primary
considerations. The stability and resistance to elevated
temperatures of the tantalum/tantalum oxide/manganese
dioxide system make solid tantalum capacitors an
appropriate choice for today's surface mount assembly
technology.
Vishay Sprague has been a pioneer and leader in this field,
producing a large variety of tantalum capacitor types for
consumer, industrial, automotive, military, and aerospace
electronic applications.
Tantalum is not found in its pure state. Rather, it is
commonly found in a number of oxide minerals, often in
combination with Columbium ore. This combination is
known as “tantalite” when its contents are more than
one-half tantalum. Important sources of tantalite include
Australia, Brazil, Canada, China, and several African
countries. Synthetic tantalite concentrates produced from
tin slags in Thailand, Malaysia, and Brazil are also a
significant raw material for tantalum production.
Electronic applications, and particularly capacitors,
consume the largest share of world tantalum production.
Other important applications for tantalum include cutting
tools (tantalum carbide), high temperature super alloys,
chemical processing equipment, medical implants, and
military ordnance.
Vishay Sprague is a major user of tantalum materials in the
form of powder and wire for capacitor elements and rod and
sheet for high temperature vacuum processing.
THE BASICS OF TANTALUM CAPACITORS
Most metals form crystalline oxides which are
non-protecting, such as rust on iron or black oxide on
copper. A few metals form dense, stable, tightly adhering,
electrically insulating oxides. These are the so-called
“valve“metals and include titanium, zirconium, niobium,
tantalum, hafnium, and aluminum. Only a few of these
permit the accurate control of oxide thickness by
electrochemical means. Of these, the most valuable for the
electronics industry are aluminum and tantalum.
Capacitors are basic to all kinds of electrical equipment,
from radios and television sets to missile controls and
automobile ignitions. Their function is to store an electrical
charge for later use.
Capacitors consist of two conducting surfaces, usually
metal plates, whose function is to conduct electricity. They
are separated by an insulating material or dielectric. The
dielectric used in all tantalum electrolytic capacitors is
tantalum pentoxide.
Tantalum pentoxide compound possesses high-dielectric
strength and a high-dielectric constant. As capacitors are
being manufactured, a film of tantalum pentoxide is applied
to their electrodes by means of an electrolytic process. The
film is applied in various thicknesses and at various voltages
and although transparent to begin with, it takes on different
colors as light refracts through it. This coloring occurs on the
tantalum electrodes of all types of tantalum capacitors.
Revision: 18-May-16
Rating for rating, tantalum capacitors tend to have as much
as three times better capacitance/volume efficiency than
aluminum electrolytic capacitors. An approximation of the
capacitance/volume efficiency of other types of capacitors
may be inferred from the following table, which shows the
dielectric constant ranges of the various materials used in
each type. Note that tantalum pentoxide has a dielectric
constant of 26, some three times greater than that of
aluminum oxide. This, in addition to the fact that extremely
thin films can be deposited during the electrolytic process
mentioned earlier, makes the tantalum capacitor extremely
efficient with respect to the number of microfarads available
per unit volume. The capacitance of any capacitor is
determined by the surface area of the two conducting
plates, the distance between the plates, and the dielectric
constant of the insulating material between the plates.
COMPARISON OF CAPACITOR
DIELECTRIC CONSTANTS
DIELECTRIC
Air or vacuum
Paper
Plastic
Mineral oil
Silicone oil
Quartz
Glass
Porcelain
Mica
Aluminum oxide
Tantalum pentoxide
Ceramic
e
DIELECTRIC CONSTANT
1.0
2.0 to 6.0
2.1 to 6.0
2.2 to 2.3
2.7 to 2.8
3.8 to 4.4
4.8 to 8.0
5.1 to 5.9
5.4 to 8.7
8.4
26
12 to 400K
In the tantalum electrolytic capacitor, the distance between
the plates is very small since it is only the thickness of the
tantalum pentoxide film. As the dielectric constant of the
tantalum pentoxide is high, the capacitance of a tantalum
capacitor is high if the area of the plates is large:

where
eA
C = ------t
C = capacitance
e = dielectric constant
A = surface area of the dielectric
t = thickness of the dielectric
Tantalum capacitors contain either liquid or solid
electrolytes. In solid electrolyte capacitors, a dry material
(manganese dioxide) forms the cathode plate. A tantalum
lead is embedded in or welded to the pellet, which is in turn
connected to a termination or lead wire. The drawings show
the construction details of the surface mount types of
tantalum capacitors shown in this catalog.
Document Number: 40076
1
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Polymer Guide
www.vishay.com
Vishay
SOLID ELECTROLYTE POLYMER TANTALUM CAPACITORS
Solid electrolyte polymer capacitors utilize sintered tantalum pellets as anodes. Tantalum pentoxide dielectric layer is formed
on the entire surface of anode, which is further impregnated with highly conductive polymer as cathode system.
The conductive polymer layer is then coated with graphite, followed by a layer of metallic silver, which provides a conductive
surface between the capacitor element and the outer termination (lead frame or other).
Molded chip polymer tantalum capacitor encases the element in plastic resins, such as epoxy materials. After assembly, the
capacitors are tested and inspected to assure long life and reliability. It offers excellent reliability and high stability for variety of
applications in electronic devices. Usage of conductive polymer cathode system provides very low equivalent series resistance
(ESR), which makes the capacitors particularly suitable for high frequency applications.
TANTALUM CAPACITOR WITH POLYMER CATHODE TYPE T55
Epoxy encapsulation
Silver adhesive
Anode polarity bar
Solderable cathode termination
Polymer / carbon / silver coating
Solderable anode termination
Sintered tantalum pellet
Lead frame welded to Ta wire
TANTALUM CAPACITOR WITH POLYMER CATHODE TYPE T58
Rating / marking
Encapsulation
Side cathode termination (-)
Anode polarity bar
Silver adhesive epoxy
Bottom cathode termination (-)
Copper pad
Side anode termination (+)
Glass reinforced epoxy resin substrate
Polymer / carbon / silver coating
Conductive strip
Sintered tantalum pellet
Anode wire
Revision: 18-May-16
Bottom anode termination (+)
Document Number: 40076
2
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Polymer Guide
www.vishay.com
Vishay
TANTALUM CAPACITOR WITH POLYMER CATHODE TYPE T52
Encapsulation
Side cathode termination (-)
Anode polarity marking
Silver adhesive epoxy
Bottom cathode termination (-)
Side anode termination (+)
Silver plated copper substrate
Sintered
tantalum pellet
Polymer / carbon / silver coating
Conductive strip
Insulation adhesive epoxy
TANTALUM CAPACITOR WITH POLYMER CATHODE TYPE T54 / T59
Top / bottom cathode termination (-)
Encapsulation
Side cathode termination (-)
Anode polarity marking
Silver adhesive epoxy
Top / bottom anode termination (+)
Non-conductive adhesive epoxy
Conductive strip
Glass reinforced epoxy substrate
Side anode termination (+)
Sintered tantalum pellet
Top / bottom cathode termination (-)
Polymer / carbon / silver coating
Top / bottom anode termination (+)
Revision: 18-May-16
Document Number: 40076
3
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Polymer Guide
www.vishay.com
Vishay
SOLID TANTALUM CAPACITORS - MOLDED CASE
SERIES
T55
PRODUCT IMAGE
VPolyTanTM, molded case, high performance polymer
High performance
-55 °C to +105 °C
3.3 μF to 680 μF
2.5 V to 35 V
± 20 %
0.1 CV
8 % to 10 %
15 m to 500 m
J, P, A, T, B, V, D
Cases J, P: 100 % tin
Case A: 100 % tin or Ni/Pd/Au
Cases T, B, V, D: Ni/Pd/Au
TYPE
FEATURES
TEMPERATURE RANGE
CAPACITANCE RANGE
VOLTAGE RANGE
CAPACITANCE TOLERANCE
LEAKAGE CURRENT
DISSIPATION FACTOR
ESR
CASE SIZES
TERMINATION FINISH
SOLID TANTALUM CAPACITORS - LEADFRAMELESS MOLDED CASE
SERIES
T52
T58
T59
T54
vPolyTanTM solid tantalum
surface mount chip
capacitors, leadframeless
molded polymer type
vPolyTanTM solid tantalum
surface mount chip
capacitors, leadframeless
molded polymer type
vPolyTanTM solid tantalum
surface mount chip
capacitors, leadframeless
molded polymer type
Low profile
-55 °C to +105 °C
(above 85 °C, voltage
derating is required)
Small case size
-55 °C to +105 °C
(above 85 °C, voltage
derating is required)
Multianode
-55 °C to +105 °C
(above 85 °C, voltage
derating is required)
vPolyTanTM solid tantalum
surface mount chip
capacitors, leadframeless
molded polymer type,
commercial off-the-shelf
(COTS)
Hi-rel COTS, multianode
-55 °C to +105 °C
(above 85 °C, voltage
derating is required)
330 μF to 2200 μF
1 μF to 330 μF
10 μF to 470 μF
10 μF to 470 μF
6.3 V to 16 V
4 V to 35 V
16 V to 75 V
16 V to 75 V
± 10 %, ± 20 %
± 20 %
± 10 %, ± 20 %
± 20 %
PRODUCT IMAGE
TYPE
FEATURES
TEMPERATURE
RANGE
CAPACITANCE
RANGE
VOLTAGE RANGE
CAPACITANCE
TOLERANCE
LEAKAGE
CURRENT
DISSIPATION
FACTOR
ESR
CASE SIZES
TERMINATION
Revision: 18-May-16
0.1 CV
10 %
8 % to 14 %
10 %
10 %
25 m to 55 m
90 m to 500 m
MM, M0, W0, W9,
A0, AA, B0, BB
100 % tin
25 m to 100 m
25 m to 100 m
E1, M1
EE
EE
100 % tin / lead
Document Number: 40076
4
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Polymer Guide
www.vishay.com
Vishay
MOLDED CAPACITORS, T55 TYPE
PLASTIC TAPE AND REEL PACKAGING DIMENSIONS in millimeters
E
A
B
C
Label
D
W
TAPE WIDTH
A+0/-3
B+1/0
C ± 0.2
D ± 0.5
E ± 0.5
W ± 0.3
8
12
Ø 180
Ø 60
Ø 13
Ø 21
2.0
9.0
13.0
Note
• A reel diameter of 330 mm is also applicable.
PLASTIC TAPE SIZE DIMENSIONS in millimeters
Pocket
Perforation
E
Ø 1.5 + 0.10
F
B
W
A
P1
t
Direction of tape flow
4.0 ± 0.1
2.0 ± 0.1
Inserting direction
Perforation
Marking side (upper)
Mounting terminal side (lower)
Symbol: R
CASE CODE
J
P
A
T
B
V
D
A ± 0.2
1.0
1.4
1.9
3.1
3.1
4.8
4.8
B ± 0.2
1.8
2.2
3.5
3.8
3.8
7.7
7.7
W ± 0.3
8.0
8.0
8.0
8.0
8.0
12.0
12.0
F ± 0.1
3.5
3.5
3.5
3.5
3.5
5.5
5.5
E ± 0.1
1.75
1.75
1.75
1.75
1.75
1.75
1.75
P1 ± 0.1
4.0
4.0
4.0
4.0
4.0
8.0
8.0
tmax.
1.3
1.6
2.5
1.7
2.5
2.6
3.4
Note
• A reel diameter of 330 mm is also applicable.
Revision: 18-May-16
Document Number: 40076
5
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Polymer Guide
www.vishay.com
Vishay
LEADFRAMELESS MOLDED CAPACITORS, ALL TYPES
PLASTIC TAPE AND REEL PACKAGING in inches [millimeters]
0.157 ± 0.004
[4.0 ± 0.10]
Tape thickness
Deformation
between
embossments
0.014
[0.35]
max.
0.059 + 0.004 - 0.0
[1.5 + 0.10 - 0.0]
Top
cover
tape
B1 (max.) (6)
10 pitches cumulative
tolerance on tape
± 0.008 [0.200]
Embossment
0.079 ± 0.002
0.069 ± 0.004
[2.0 ± 0.05]
[1.75 ± 0.10]
A0
K0
0.030 [0.75]
min. (3)
B0
0.030 [0.75]
min. (4)
Top cover
tape
For tape feeder 0.004 [0.10]
max.
reference only
including draft.
Concentric around B0 (5)
F
W
20°
Maximum
component
rotation
(Side or front sectional view)
Center lines
of cavity
P1
D1 (min.) for components
(5)
.
0.079 x 0.047 [2.0 x 1.2] and larger
USER DIRECTION
OF FEED
Maximum
cavity size (1)
Cathode (-)
Anode (+)
DIRECTION OF FEED
20° maximum
component rotation
Typical
component
cavity
center line
B0
A0
(Top view)
Typical
component
center line
3.937 [100.0]
0.039 [1.0]
max.
Tape
0.039 [1.0]
max.
0.9843 [250.0]
Camber
(Top view)
Allowable camber to be 0.039/3.937 [1/100]
Non-cumulative over 9.843 [250.0]
Tape and Reel Specifications: all case sizes are
available on plastic embossed tape per EIA-481.
Standard reel diameter is 7" [178 mm].
Notes
• Metric dimensions will govern. Dimensions in inches are rounded and for reference only.
(1) A , B , K , are determined by the maximum dimensions to the ends of the terminals extending from the component body and / or the body
0
0
0
dimensions of the component. The clearance between the ends of the terminals or body of the component to the sides and depth of the
cavity (A0, B0, K0) must be within 0.002" (0.05 mm) minimum and 0.020" (0.50 mm) maximum. The clearance allowed must also prevent
rotation of the component within the cavity of not more than 20°.
(2) Tape with components shall pass around radius “R” without damage. The minimum trailer length may require additional length to provide
“R” minimum for 12 mm embossed tape for reels with hub diameters approaching N minimum.
(3) This dimension is the flat area from the edge of the sprocket hole to either outward deformation of the carrier tape between the embossed
cavities or to the edge of the cavity whichever is less.
(4) This dimension is the flat area from the edge of the carrier tape opposite the sprocket holes to either the outward deformation of the carrier
tape between the embossed cavity or to the edge of the cavity whichever is less.
(5) The embossed hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of
embossment location shall be applied independent of each other.
(6) B dimension is a reference dimension tape feeder clearance only.
1
Revision: 18-May-16
Document Number: 40076
6
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Polymer Guide
www.vishay.com
Vishay
CARRIER TAPE DIMENSIONS in inches [millimeters]
CASE CODE
TAPE SIZE
B1 (MAX.) (1)
D1 (MIN.)
F
E1
K0 (MAX.)
P1
W
0.043 [1.10]
0.157 [4.0]
0.315 [8.0]
TBD
MM (2)
8 mm
0.075 [1.91]
0.02 [0.5]
0.138 [3.5]
M0
TBD
M1
12 mm
0.32 [8.2]
0.059 [1.5]
0.217 ± 0.002
[5.5 ± 0.05]
0.094 [2.39]
0.315 ± 0.04
[8.0 ± 1.0]
0.472 + 0.012 / - 0.004
[12.0 + 0.3 / - 0.10]
W9
8 mm
0.126 [3.20]
0.030 [0.75]
0.138 [3.5]
0.045 [1.15]
0.157 [4.0]
0.315 [8.0]
W0
8 mm
0.126 [3.20]
0.030 [0.75]
0.138 [3.5]
0.045 [1.15]
0.157 [4.0]
0.315 [8.0]
A0
8 mm
-
0.02 [0.5]
0.138 [3.5]
0.049 [1.25]
0.157 [4.0]
0.315 [8.0]
AA
8 mm
0.154 [3.90]
0.039 [1.0]
0.138 [3.5]
0.079 [2.00]
0.157 [4.0]
0.315 [8.0]
B0
12 mm
0.181 [4.61]
0.059 [1.5]
0.217 [5.5]
0.049 [1.25]
0.157 [4.0]
0.315 [8.0]
BB
8 mm
0.157 [4.0]
0.039 [1.0]
0.138 [3.5]
0.087 [2.22]
0.157 [4.0]
0.315 [8.0]
EE
12 mm
0.32 [8.2]
0.059 [1.5]
0.217 ± 0.002
[5.5 ± 0.05]
0.175 [4.44]
0.315 ± 0.04
[8.0 ±1.0]
0.472 + 0.012 / - 0.004
[12.0 + 0.3 / - 0.10]
Notes
(1) For reference only.
(2) Standard packaging of MM case is with paper tape. Plastic tape is available per request.
PAPER TAPE AND REEL PACKAGING DIMENSIONS in inches [millimeters]
T
Ø D0
P2
P0
[10 pitches cumulative tolerance on tape ± 0.2 mm]
E1
A0
Bottom cover
tape
F
W
B0
E2
Top
cover tape
P1
Cavity center lines
Anode
Cavity size (1)
G
Bottom cover tape
USER FEED DIRECTION
CASE TAPE
SIZE SIZE
MM
8 mm
A0
B0
D0
P0
P1
P2
E
F
W
T
0.041 ± 0.002 0.071 ± 0.002 0.06 ± 0.004 0.157 ± 0.004 0.157 ± 0.004 0.079 ± 0.002 0.069 ± 0.004 0.0138 ± 0.002 0.315 ± 0.008 0.037 ± 0.002
[1.05 ± 0.05] [1.8 ± 0.05] [1.5 ± 0.1]
[4.0 ± 0.1]
[4.0 ± 0.1]
[2.0 ± 0.05] [1.75 ± 0.1]
[3.5 ± 0.05]
[8.0 ± 0.2] [0.95 ± 0.05]
Note
(1) A , B are determined by the maximum dimensions to the ends of the terminals extending from the component body and / or the body
0
0
dimensions of the component. The clearance between the ends of the terminals or body of the component to the sides and depth of the
cavity (A0, B0) must be within 0.002" (0.05 mm) minimum and 0.020" (0.50 mm) maximum. The clearance allowed must also prevent rotation
of the component within the cavity of not more than 20°.
Revision: 18-May-16
Document Number: 40076
7
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Polymer Guide
www.vishay.com
Vishay
PACKING AND STORAGE
Polymer capacitors meet moisture sensitivity level rating (MSL) of 3 as specified in IPC/JEDEC® J-STD-020 and are dry
packaged in moisture barrier bags (MBB) per J-STD-033. Level 3 specifies a floor life (out of bag) of 168 hours at 30 °C maximum
and 60 % relative humidity (RH). Unused capacitors should be re-sealed in the MBB with fresh desiccant. A moisture strip
(humidity indicator card) is included in the bag to assure dryness. To remove excess moisture, capacitors can be dried at 40 °C
(standard “dry box” conditions).
For detailed recommendations please refer to J-STD-033.
RECOMMENDED REFLOW PROFILES
TP
tp
Max. ramp up rate = 3 °C/s
Max. ramp down rate = 6 °C/s
TL
Temperature
TSmax.
tL
Preheat area
TSmin.
tS
25
Time 25 °C to peak
Time
PROFILE FEATURE
PREHEAT AND SOAK
Temperature min. (TSmin.)
Temperature max. (TSmax.)
Time (tS) from (TSmin. to TSmax.)
RAMP UP
Ramp-up rate (TL to Tp)
Liquidus temperature (TL)
Time (tL) maintained above TL
Peak package body temperature (Tp) max.
Time (tp) within 5 °C of the peak max. temperature
RAMP DOWN
Ramp-down rate (Tp to TL)
Time from 25 °C to peak temperature
SnPb EUTECTIC ASSEMBLY
LEAD (Pb)-FREE ASSEMBLY
100 °C
150 °C
60 s to 120 s
150 °C
200 °C
60 s to 120 s
3 °C/s maximum
183 °C
217 °C
60 s to 150 s
Depends on type and case - see table below
20 s
5s
6 °C/s maximum
6 min maximum
8 min maximum
PEAK PACKAGE BODY TEMPERATURE (Tp) MAXIMUM
TYPE
CASE CODE
T55
T52
T58
T59
T54
J, P, A, T, B, V, D
E1, M1
MM, M0, W9, W0, A0, AA, B0, BB
EE
EE
PEAK PACKAGE BODY TEMPERATURE (TP) MAX.
SnPb EUTECTIC ASSEMBLY
n/a
220 °C
LEAD (Pb)-FREE ASSEMBLY
260 °C
260 °C
260 °C
250 °C
250 °C
Notes
• T52, T55, and T58 capacitors are process sensitive.
PSL classification to JEDEC J-STD-075: R4G
• T54 capacitors with 100 % tin termination and T59 capacitors are process sensitive.
PSL classification to JEDEC J-STD-075: R6G
Revision: 18-May-16
Document Number: 40076
8
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Polymer Guide
www.vishay.com
Vishay
MOLDED CAPACITORS, T55 TYPE
PAD DIMENSIONS in millimeters
L
X
Capacitor
Pattern
Y
W
G
Z
CAPACITOR SIZE
PAD DIMENSIONS
CASE /
DIMENSIONS
L
W
G (max.)
Z (min.)
X (min.)
Y (Ref.)
J
1.6
0.8
0.7
2.5
1.0
0.9
P
2.0
1.25
0.5
2.6
1.2
1.05
A
3.2
1.6
1.1
3.8
1.5
1.35
T/B
3.5
2.8
1.4
4.1
2.7
1.35
V/D
7.3
4.3
4.1
8.2
2.9
2.05
LEADFRAMELESS MOLDED CAPACITORS, ALL TYPES
PAD DIMENSIONS in inches [millimeters]
B
D
C
A
TYPE
CASE CODE
A (MIN.)
B (NOM.)
C (NOM.)
D (NOM.)
E1
0.209 [5.30]
0.098 [2.5]
0.169 [4.3]
0.366 [9.3]
M1
0.276 [7.00]
0.098 [2.5]
0.169 [4.3]
0.366 [9.3]
MM / M0
0.039 [1.00]
0.028 [0.70]
0.024 [0.60]
0.080 [2.00]
W0 / W9
0.059 [1.50]
0.031 [0.80]
0.039 [1.00]
0.102 [2.60]
AA / A0
0.071 [1.80]
0.067 [1.70]
0.053 [1.35]
0.187 [4.75]
BB / B0
0.118 [3.00]
0.071 [1.80]
0.065 [1.65]
0.207 [5.25]
EE
0.209 [5.30]
0.098 [2.5]
0.169 [4.3]
0.366 [9.3]
T52
T58
T59 / T54
Revision: 18-May-16
Document Number: 40076
9
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Polymer Guide
www.vishay.com
Vishay
GUIDE TO APPLICATION
1.
AC Ripple Current: the maximum allowable ripple
current shall be determined from the formula:
I R MS =
Reverse Voltage: these capacitors are capable of
withstanding peak voltages in the reverse direction
equal to 10 % of the DC rating at +25 °C, 5 % of the
DC rating at +25 °C, 5 % of the DC rating at +85 °C,
and 1 % of the DC rating at +105 °C.
5.
Mounting Precautions:
5.1
Limit Pressure on Capacitor Installation with
Mounter: pressure must not exceed 4.9 N with a tool
end diameter of 1.5 mm when applied to the
capacitors using an absorber, centering tweezers, or
similar (maximum permitted pressurization time: 5 s).
An excessively low absorber setting position would
result in not only the application of undue force to the
capacitors but capacitor and other component
scattering, circuit board wiring breakage, and / or
cracking as well, particularly when the capacitors are
mounted together with other chips having a height of
1 mm or less.
P
-----------R ESR
where,
P=
4.
power dissipation in W at +45 °C as given in
the tables in the product datasheets.
RESR = the capacitor equivalent series resistance at
the specified frequency.
2.
AC Ripple Voltage: the maximum allowable ripple
voltage shall be determined from the formula:
P
V R MS = Z -----------R ESR
or, from the formula:
V RMS = I R MS x Z
where,
P=
power dissipation in W at +45 °C as given in
the tables in the product datasheets.
RESR = The capacitor equivalent series resistance at
the specified frequency.
Z=
2.1
The capacitor impedance at the specified
frequency.
The tantalum capacitors must be used in such a
condition that the sum of the working voltage and
ripple voltage peak values does not exceed the rated
voltage as shown in figure below.
Voltage
Ripple voltage
Rated voltage
Operating
voltage
Working voltage
Time (s)
3.
Temperature Derating: power dissipation is
affected by the heat sinking capability of the
mounting surface. If these capacitors are to
be operated at temperatures above +45 °C, the
permissible ripple current (or voltage) shall be
calculated using the derating coefficient as shown in
the table below:
5.2
Flux Selection
5.2.1 Select a flux that contains a minimum of chlorine and
amine.
5.2.2 After flux use, the chlorine and amine in the flux
remain must be removed.
5.3
Cleaning After Mounting: the following solvents are
usable when cleaning the capacitors after mounting.
Never use a highly active solvent.
• Halogen organic solvent (HCFC225, etc.)
• Alcoholic solvent (IPA, ethanol, etc.)
• Petroleum solvent, alkali saponifying agent, water,
etc.
Circuit board cleaning must be conducted at a
temperature of not higher than 50 °C and for an
immersion time of not longer than 30 minutes. When
an ultrasonic cleaning method is used, cleaning must
be conducted at a frequency of 48 kHz or lower, at
an vibrator output of 0.02 W/cm3, at a temperature of
not higher than 40 °C, and for a time of 5 minutes or
shorter.
Notes
• Care must be exercised in cleaning process so that the
mounted capacitor will not come into contact with any
cleaned object or the like or will not get rubbed by a stiff
brush or similar. If such precautions are not taken
particularly when the ultrasonic cleaning method is
employed, terminal breakage may occur.
• When performing ultrasonic cleaning under conditions
other than stated above, conduct adequate advance
checkout.
MAXIMUM RIPPLE CURRENT TEMPERATURE
DERATING FACTOR
 45 °C
1.0
55 °C
0.8
85 °C
0.6
105 °C
0.4
Revision: 18-May-16
Document Number: 40076
10
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000