PRODUCT DATASHEET FM100 Formaldehyde (CH2O or HCHO) Monitor Measures Formaldehyde concentration, Air Temperature and Humidity with user-settable alarm. Perfect for monitoring indoor air quality of areas affected by formaldehyde gas. Back stand for desktop display or can be wall mounted. Applications: Formaldehyde is used in the manufacture of many industrial and consumer goods. Emissions from some of these items can rise when moisture and heat increase. These emissions are a contributing factor to Sick Building Syndrome, which may lead to itchy eyes and throat, as well as headaches and dizziness. - Glue - Paint - Insulation/Plywood/Fiberboard - Timber Paneling/Particleboard - Cosmetics - Shampoos - Soap Bars/Body Wash - Lotions - Toothpaste Features • • • Alternately displays Formaldehyde concentration, • Designed with Electrochemical CH2O sensor Air Temperature, and Relative Humidity readings • CH2O Calibration function in fresh air (cycles approximately every 6 seconds) • Four display error codes for troubleshooting Visible bright tri-colored LED indicator: • Low battery indicator Green <0.08ppm, Yellow = 0.08 to 0.79ppm, • Recover to factory setting function and Red = 0.80ppm and above • Complete with built-in stand, side cover, LCD displays alarm icon, LED light turns red, and loud Universal AC Adaptor (multi-plugs US, EU, audible beeper sounds when indoor CH2O level UK, and AU), and 4 AAA batteries exceeds set point (defaults at 0.08ppm); beeper can be temporarily turned off for false alarm • Selectable CH2O unit as ppm or mg/m 3 • “ZERO” Re-Calibration function • Manual Temperature and Relative Humidity < 0.08ppm Normal = 0.08 to 0.79ppm Caution = 0.80ppm & above Danger Bright Tri-colored LED Indicator for CH2O Level Compensation (adjustable) Specifications Range Resolution Basic Accuracy Formaldehyde (CH2O or HCHO) 0.00 to 5.00ppm (mg/m3) 0.01ppm (mg/m3) ±5% of reading + 0.03ppm Air Temperature 32 to 122°F (0 to 50°C) 0.1°F/°C ±2°F/1°C Humidity 20 to 90%RH 1%RH ±5%RH Dimensions 4.4x4.3x2.1" (113x108x53mm) Weight 5.6oz (159g) Ordering FM100................ Formaldehyde Monitor UPC Code: 793950231005 Specifications subject to change without notice. Copyright © 2014 FLIR Systems, Inc. All rights reserved including the right of reproduction in whole or in part in any form. Rev. 3/11/15 www.extech.com