Specification for a LC Filter Diplexer Filter MtronPTI P/N: LF9422 I. General & Electrical Requirements: 1. Port 1 Filter Center Frequency (FON): 1780MHz Passband: FON ±70MHz (1710MHz to 1850MHz) minimum Insertion Loss (in the Passband): 1.0dB nominal, 1.25dB maximum Return Loss (in the Passband): 15.0dB minimum 2. Port 2 Filter Center Frequency (FON): 2350MHz Passband: FON ±150MHz (2200MHz to 2500MHz) minimum Insertion Loss (in the Passband): 1.0dB nominal, 1.25dB maximum Return Loss (in the Passband): 15.0dB minimum 3. Common Port 1 to Port 2 Isolation: 15dB minimum Power Handling: ≤ 5-watts CW ZIN/ZOUT (all ports): 50 nominal II. Environmental & Physical Requirements: 1. Environmental Temperature Operating (OTR): -40°C to +60°C Storage (STR): -55°C to +95°C 2. Package: Size: 1.000” (L) x 1.000” (W) x 0.200” (H, Max.) Type: SMD (production) Figure 1: Production Model SMD Outline Drawing (TBD) Page 1 of 2 The information contained herein is proprietary to MtronPTI and is submitted in confidence. This information may not be copied or divulged without the express written permission of MtronPTI Specification for a LC Filter Diplexer Filter MtronPTI P/N: LF9422 III. Engineering Model Plot(s): IV. Data Sheet Revision Table: Date 03/20/13 Rev. 2 Author BRM 03/19/13 1 BRM 02/08/13 0 BRM Details of Revision Updated Outline Drawing to reflect correct dimensioning for tolerancing. Original Product Release, Updated Insertion Loss and Operating Temperature Range (OTR) specification. Added SMD Outline Drawing. Original Draft. Page 2 of 2 The information contained herein is proprietary to MtronPTI and is submitted in confidence. This information may not be copied or divulged without the express written permission of MtronPTI