Part No. NPAK-3FBA-RG-2m-1m Nitropak, 3/8" female BSPP gauge adapter, 2m, 1m hoses, (2) 1/4" FBSPP process connections Self contained nitrogen source includes all connections and hoses to connect directly to a pressure gauge or calibrator Features • Proprietary pressure balanced fine adjustment piston allows for extremely precise, finger-tip control of pressure at 0.03 psi (2 mbar) or 3000 psi (210 bar) or any range in between. • Easily refillable nitrogen cylinder holds enough gas for multiple calibrations • Nylon bag to hold hose and fittings attached to inside of lid • Includes storage compartment in control panel for pressure reference test gauge • Low volume Quick-test hose, gauge adapter and process connection can be attached to NPAK without thread sealant or a wrench NPAK-3FBA-RG-2m-1m • Designed to meet US Department of Transportation (DOT) and Canadian Transport Canada (TC) standards • CE Approved for use in European Union - Designed to meet Pressure Equipment Directive (PED) and Transportable Pressure Equipment (TPED) standards • Made in USA Item Includes • Assembly - NPAK Assembly (NPAK) • Gauge Adapter - G 3/8" female BSPP (ISO 228/1) x female Quick-test, no check-valve, brass (QTHA-3FBA-RG) • Hose - Quick-test 6900 psi hose, brass hose ends, 2 m (6.6 ft) long (QTQT-HOS-2m) • Hose - Quick-test 6900 psi hose, brass hose ends, 1 m (3.3 ft) long (QTQT-HOS-1m) • Hose Adapter - G 1/4" female BSPP (ISO 228/1) x male Quick-test, no check-valve, brass (QTHA-2FB0-RG) • Hose Adapter - G 1/4" female BSPP (ISO 228/1) x male Quick-test, no check-valve, brass (QTHA-2FB0-RG) Specifications Pressure Range 0 to 3000 psi (0 to 207 bar) Vacuum Range 0 to 10"Hg (0 to 254 mmHG) Temperature range 0 to 130 °F (-18 to 54 °C) Construction ABS Plastic, Aluminum, Anodized Aluminum, Brass, Plated Steel, Stainless Steel Seal materials Buna-N, Delrin, Teflon Ralston Instruments Inc. | ralstoninst.com | Toll Free 800-347-6575 | Phone 440-564-1430 | Fax 440-564-1480