METRIC MIL-PRF-55681/11C 12 December 2006 SUPERSEDING MIL-PRF-55681/11B 3 July 1997 PERFORMANCE SPECIFICATION SHEET CAPACITORS, CHIP, MULTIPLE LAYER, FIXED, CERAMIC DIELECTRIC, ESTABLISHED RELIABILITY AND NON-ESTABLISHED RELIABILITY, STYLE CDR35, METRIC This specification sheet is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specification sheet and MIL-PRF-55681. 4.50 mm 0.50 1.50 4.50 6.40 6.40 Inches .020 .059 .176 .250 1.50 MAX .50 NOTES: 1. Dimensions are in millimeters. 2. Unless otherwise specified, tolerance is ± 0.30 mm (.012 inch). 3. Dimensions and tolerances are for bare chips. For solder coated terminations add 0.60 mm (.023 inch) to the positive length tolerance and 0.30 mm (.012 inch) to the positive width and thickness tolerance. 4. Inch equivalents are given for general information only. FIGURE 1. Style CDR35 capacitors. AMSC N/A DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. FSC 5910 MIL-PRF-55681/11C REQUIREMENTS: Dimensions and configuration: See figure 1. Capacitance value: See table I. Capacitance tolerance: F = ±1 percent; J = ±5 percent; K = ±10 percent; M = ±20 percent. See table I. Rated voltage: See table I. Operating temperature range: -55° C to +125° C. * Product level designator: Non-established Reliability - C; Established Reliability - M, P, R, and S. Marking: In accordance with MIL-PRF-55681. TABLE I. Style CDR35 capacitor characteristics. Part or Identifying Number (PIN) 1/ Capacitance pF Capacitance tolerance Rated temperature and voltage-temperature limits Rated voltage V dc CDR35BP472B - - CDR35BP512B - - CDR35BP562B - - CDR35BP622B - - CDR35BP682B - - CDR35BP752B - - CDR35BP822B - - CDR35BP912B - - CDR35BP103B - - CDR35BP113A - - CDR35BP123A - - CDR35BP133A - - CDR35BP153A - - CDR35BP163A - - CDR35BP183A - - CDR35BP203A - - CDR35BP223A - - CDR35BX563B - - CDR35BX683B - - CDR35BX823B - - CDR35BX104B - - CDR35BX124B - - CDR35BX154B - - CDR35BX184A - - CDR35BX224A - - CDR35BX274A - - CDR35BX334A - - CDR35BX394A - - CDR35BX474A - - - 4,700 5,100 5,600 6,200 6,800 7,500 8,200 9,100 10,000 11,000 12,000 13,000 15,000 16,000 18,000 20,000 22,000 56,000 68,000 82,000 100,000 120,000 150,000 180,000 220,000 270,000 330,000 390,000 470,000 F, J, K F, J, K F, J, K F, J, K F, J, K F, J, K F, J, K F, J, K F, J, K F, J, K F, J, K F, J, K F, J, K F, J, K F, J, K F, J, K F, J, K K, M K, M K, M K, M K, M K, M K, M K, M K, M K, M K, M K, M BP BP BP BP BP BP BP BP BP BP BP BP BP BP BP BP BP BX BX BX BX BX BX BX BX BX BX BX BX 100 100 100 100 100 100 100 100 100 50 50 50 50 50 50 50 50 100 100 100 100 100 100 50 50 50 50 50 50 1/ The complete PIN will include additional symbols to indicate capacitance tolerance, termination and product level. 2 MIL-PRF-55681/11C * * Changes from previous issue. The margins of this specification sheet are marked with asterisks to indicate where changes from the previous issue were made. This was done as a convenience only and the Government assumes no liability whatsoever for any inaccuracies in these notations. Bidders and contractors are cautioned to evaluate the requirements on this document on the entire content irrespective of the marginal notations and relationship to the last previous issue. Custodians: Army - CR Navy - EC Air Force - 11 DLA - CC Preparing activity: Army - CR Review activities: Navy - AS, MC, OS, SH Air Force - 19, 99 (Project 5910-2006-055) Agent: DLA -CC NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http://assist.daps.dla.mil . 3