M615x Series 5.0 x 7.0 mm, 3.0, 3.3 & 5.0 V, HCMOS or Clipped Sine Wave, Precision TCXO/TCVCXO Product Features Features • Stratum 3 Performance with 0.34 ppm (pk-pk) Holdover Stability Over Industrial Temperature Range (-40 °C to +85 °C) • 3.0 V, 3.3 V and 5.0 V Options • Low Phase Noise and Excellent G-Sens Performance (1.5 ppb/g) • Tristate Function Available • Available in Clipped Sine Wave or HCMOS Applications • Synchronous Ethernet Slave Clocks ITU-T G.8262 EEC Options 1 & 2 • Compliant to Stratum 3 GR-1244-Core & GR-253-Core • SONET/SDH Network Timing • Wireless Communications Product Description MtronPTI’s M615x Series TCXO and TCVCXO provide network and wireless engineers with low voltage, surface mount products with extremely tight stability over temperature and time. MtronPTI’s unique approach to crystal compensation enables these devices to achieve full Stratum 3 compliance, including holdover stability over the industrial temperature range (-40 °C to +85 °C). Specially processed crystals enable the M615x to achieve consistent long-term stability and minimal frequency shift after reflow. This processing also achieves excellent g-sensitivity (1.5 ppb/g). The low phase noise (-155 dBc/Hz at 100 kHz offset) makes the M615x ideal for the design engineer working on all types of systems as the reference timing source. Product Ordering Information Ordering Information M6151 2 S T S N 00.0000 MHz Product Series M6150 = 5.0 V M6151 = 3.3 V M6152 = 3.0 V Temperature Range 1: 0 °C to +70 °C 8: 0 °C to +50 °C 2: -40 °C to +85 °C F: -30 °C to +75 °C 6: -20 °C to +70 °C Stability S: ±4.6 ppm w/Holdover Output Type T: Voltage Controlled With Tristate F: No Voltage Control With Tristate Output Waveform C: HCMOS S: Clipped Sine Wave Package/Lead Configurations N: Leadless Ceramic (10 pads) Frequency (customer specified) M615xSxxx - Custom datasheets. MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application. Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application specific requirements at 800.762.8800 toll free or 605.665.9321. Rev: 07/17/2013 M615x Series 5.0 x 7.0 mm, 3.0, 3.3 & 5.0 V, HCMOS or Clipped Sine Wave, Precision TCXO/TCVCXO Performance Characteristics Parameter Frequency Range Initial Accuracy Operating Temperature Storage Temperature Stability vs Temperature Symbol FO FI TA TSTG ∆FVDD/F ∆FLOAD/F Electrical Specifications VOL VOH tDC tR/tF Units Contact factory above 38.88 MHz. @ +25 °C at time of shipment. 0.3 ppm 40 +4.6 ppb ppm ±0.02 ±0.1 ±0.02 ±0.1 Supply Voltage & Current ppm ppm TA = -40 °C to +85 °C (includes Hysteresis) Ref GR1244CORE After 24 hours at constant temperature. Includes initial calibration @ +25 °C, deviation over temperature, supply voltage and load variations, reflow, hysteresis, and 20 year aging. ±5 % change in voltage. ±5 % change in load. -5.0 +5.0 3.0 4.0 5.2 2.0 2.7 3.5 % mA mA mA mA mA mA (See Ordering Information) HCMOS output at 13 MHz HCMOS output at 26 MHz HCMOS output at 38.88 MHz Clipped Sine Wave output at 13 MHz Clipped Sine Wave output at 26 MHz Clipped Sine Wave output at 38.88 MHz 20 % VDD % VDD Vpk-pk Vpk-pk 60 6.5 % ns -55 +125 Frequency Stabilities 80 1.0 0.8 40 50 15 pF 10 kΩ || 10 pF ±9.2 0.3 0.3 0.5 -50 100 Input Leakage Current Input Resistance Linearity Modulation Bandwidth Conditions/Notes MHz ppm °C °C 2.0 3.0 4.2 1.3 1.7 2.3 RF Output Frequency Adjustment Control Voltage Range ppm V V V µA kΩ % 2.7 3.0 4.5 +50 5 IOH/IOL = ±4 mA, VDD = +3.0 V IOH/IOL = ±4 mA, VDD = +3.0 V FO < 40 MHz FO > 40 MHz Ref. to ½ VS. HCMOS Only Ref. 10 % to 90 %. HCMOS only HCMOS Output Clipped Sine Wave Output Over Control Voltage Range For VDD = 3.0 V For VDD = 3.3 V For VDD = 5.0 V 2 kHz Other Parameters Tristate Function 70 Tristate Leakage Current Phase Noise (Typical 12.8 MHz HCMOS @ 3.3 V) Environmental Max. -4.6 Supply Voltage (VDD) Tolerance Supply Current (ID) (Reference to VDD = 3.3 V) Output Logic Levels (HCMOS) Output Level (Clipped Sine Wave) Symmetry (Duty Cycle) Rise/Fall Time Output Load Typ. 8 38.88 -1.0 +1.0 (See Ordering Information) ∆FT/F Stability vs Drift Free-Run Accuracy Stability vs Supply Voltage Stability vs Load Min. 30 +100 -100 -102 -132 -148 -154 -155 % VDD % VDD µA dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz Output enabled. Logic “1” or “Open” Output disabled. Logic “0” or “GND” @ 10 Hz Offset @ 100 Hz Offset @ 1 kHz Offset @ 10 kHz Offset @ 100 kHz Offset Shock MIL-STD-202, Method 213, Condition C (100 g) Vibration MIL-STD-202, Methods 201 & 204 (10 g from 10 Hz to 2000 Hz) Solderability EIAJ-STD-002 Package 5.0 mm x 7.0 mm, SMT and DIP (RoHS Compliant) Max Soldering Conditions See solder profile MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application. Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application specific requirements at 800.762.8800 toll free or 605.665.9321. 2 M615x Series 5.0 x 7.0 mm, 3.0, 3.3 & 5.0 V, HCMOS or Clipped Sine Wave, Precision TCXO/TCVCXO Phase Noise Plot M615x 12.8 MHz Phase Noise Output Waveform (HCMOS Output) MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application. Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application specific requirements at 800.762.8800 toll free or 605.665.9321. 3 M615x Series 5.0 x 7.0 mm, 3.0, 3.3 & 5.0 V, HCMOS or Clipped Sine Wave, Precision TCXO/TCVCXO Product Dimension & Pinout Information Pin Connections Function Pad N/C - Do Not Connect 1 N/C - Do Not Connect 2 N/C - Do Not Connect 3 Ground 4 Output 5 N/C - Do Not Connect 6 N/C - Do Not Connect 7 Tristate 8 Supply Voltage (VDD) 9 Control Voltage 10 SUGGESTED SOLDER PAD LAYOUT MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application. Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application specific requirements at 800.762.8800 toll free or 605.665.9321. 4 M615x Series 5.0 x 7.0 mm, 3.0, 3.3 & 5.0 V, HCMOS or Clipped Sine Wave, Precision TCXO/TCVCXO Handling Information Although protection circuitry has been designed into the M615x oscillator, proper precautions should be taken to avoid exposure to electrostatic discharge (ESD) during handling and mounting. MtronPTI utilizes a human-body model (HBM) and a charged-device model (CDM) for ESD-susceptibility testing and protection design evaluation. ESD voltage thresholds are dependent on the circuit parameters used to define the mode. Although no industrywide standard has been adopted for the CDM, a standard HBM (resistance = 1500 Ω, capacitance = 100 pF) is widely used and therefore can be used for comparison purposes. The HBM ESD threshold presented here was obtained using these circuit parameters. Model ESD Threshold, Minimum Human Body 1500* Charged Device 1500* * MIL-STD-833D, Method 3015, Class 1 Unit V V ATTENTION Static Sensitive Devices Handle only at Static Safe Work Stations Typical Test Circuits Tristate Control N/C Test Circuit - N Package With Tristate MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application. Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application specific requirements at 800.762.8800 toll free or 605.665.9321. 5 M615x Series 5.0 x 7.0 mm, 3.0, 3.3 & 5.0 V, HCMOS or Clipped Sine Wave, Precision TCXO/TCVCXO Tape & Reel Specifications (all measurements are in mm) M615x A B C D E F G H J K L M N 5.40 7.40 1.55 7.50 2.60 2.00 4.00 16.00 330 13.00 20.20 100 16.40 Standard Tape and Reel: 1000 parts per reel Maximum Soldering Conditions Note: Exceeding these limits may damage the device. MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application. Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application specific requirements at 800.762.8800 toll free or 605.665.9321. 6 M615x Series 5.0 x 7.0 mm, 3.0, 3.3 & 5.0 V, HCMOS or Clipped Sine Wave, Precision TCXO/TCVCXO Quality Parameters Test Electrical Characteristics Frequency vs. Temperature Mechanical Shock Vibration Thermal Cycle Aging Gross Leak Fine Leak Solderability Resistance to Solvents Physical Dimensions Internal Visual Environmental Specifications/Qualification Testing Performed Test Method Test Condition Internal Specification Per Specification Internal Specification Per Specification MIL-STD-202, Method 213, C 100 g’s MIL-STD-202, Method 201-204 10 g’s from 10-2000 Hz MIL-STD-883, Method 1010, B -55 Deg. C to +125 Deg. C, 15 minute Dwell, 10 cycles Internal Specification 168 Hours at 105 Degrees C MIL-STD-202, Method 112 30 Second Immersion MIL-STD-202, Method 112 Must meet 1x10-8 MIL-STD-883, Method 2003 8 Hour Steam Age – Must Exhibit 95% coverage MIL-STD-883, Method 2015 Three 1 minute soaks MIL-STD-883, Method 2016 Per Specification Internal Specification Per Internal Specification Load Circuit Load Circuit #7 - Clipped Sine Wave Output Load Circuit #2 - HCMOS Output DUT Output DUT Output Test Point Test Point 10K Ohms C Load 10 pF Note: C Load includes probe and fixturing. For custom products or additional specifications contact our sales team at 800.762.8800 (toll free) or 605.665.9321 For more information on this product visit the MtronPTI website at www.mtronpti.com 7