STC-GO (22x-GL315) Technical Data Sheet

STC-GO (22x-GL315)
Technical Data Sheet
Product
Product Type:
Geared One-Stage Turbocompressor
Product Name:
STC-GO (22x-GL315)
Gearbox type
Single helical gears, with journal bearings, forced lubrication
Medium:
Air
Control System:
- Dual Point Control STC-GO (22SV-GL315)
- Variable Diffuser Vanes STC-GO (22S- GL315)
- Inlet Guide Vanes STC-GO (22V- GL315)
Dimensions
"C"
"D"
"F"
"J"
"G"
"B"
D1
G1
A1
F2
A2
"A"
"E"
A3
H1
H2
"H"
F1
H3
D2
A-F1
A. Inlet silencer:
B. Compensator:
C. Cone diffuser:
D. Compressor unit:
F. Enclosure:
E. Ventilation Fan
G. LCP Panel:
H. Base frame:
J. Compressor drive:
Dimensions-A-(mm)
Dimensions-B-(mm)
Dimensions-C-(mm)
Dimensions-D-(mm)
Dimensions-F-(mm)
Dimensions-G-(mm)
Dimensions-H-(mm)
Dimensions-J-(mm)
Inlet air Filter are included, Aluzinc STS Standard
Galvanized mild steel St. 37-2 PN10
Galvanized or painted mild steel St. 37-2, flange PN10
Included gear house and compressor
Al-Zn coated steel, insolated with glass wool
Standard cabinet on steel frame
Welded steel St. 37-2
Electrical motor by client choice
A1= 2400, A2=1900X1900, A3= 1400
Dc = 250
Dd = 500/600 L = 1400/1900
D1=1430, D2= depending on motor
F1=2830, A-F1= 6140, F2= 2800
G1= 1700
H1= 1300, H2=na, H3= 2770
Specified by motor supplier
All Dimensions are project specific, non binding and subject to change
Geared Turbocompressors
Answers for energy
STC-GO (22x-GL315)
Technical Data Sheet
Performance
Flow range:
Diff. pressure range:
Pressure [bar] at 20 C, 1.013, 60% rh
Power Range:
Flow regulation:
Noise level:
15000 - 23000 Nm3/h (at 0oC, 1.013 bar, 0% rh)
0.9 bar(g) – 2.1 bar(g) (at 20oC, 1.013 bar, 60% rh)
Inlet guide vane (IGV) machine to 2/3 of max pressure
400 – 1200 kW
100% - 45%
Without silencer hood: 95 dB(A) (at one meter distance)
With silencer hood:
78 dB(A) (at one meter distance)
3,3
3,1
2,9
2,7
2,5
2,3
2,1
1,9
1,7
1,5
14000
16000
18000
20000
22000
24000
Flow [Nm³/hr]
Technical Parameters
Weight approx:
Aggregate:
4500 kg
Inlet silencer:
750 kg
Acoustic enclosure:
1000 kg
Electrical motor:
5000 kg
Footprint:
A-F1 X F1
15 m2 - 18 m2
Floor Mounting:
Glue or bolted Machine mounts
Discharge velocity:
Max. 20 m/s after cone diffuser
Vibration level:
Max 4.5 mm/s according to ISO 10816-1
Lube oil cooling:
Air or water cooling
Human Interface:
Siemens touch panel, BW 6” screen
PLC:
Siemens 7 series (SIMATIC) input 4-20 mA
Pressure measurement: Transducers, Endress Häuser (4-20 mA)
Temp. measurement: Transducers, PT100 ( 4-20 mA)
Transmitters:
Siemens Sitrans, or customer specified (4-20 mA)
Geared Turbocompressors
Answers for energy
26000
STC-GO (22x-GL315)
Technical Data Sheet
Compressor drive
Drive:
Drive power:
Input frequency:
Motor speed:
Protection class:
Electrical Motor 2 pole, low-medium-high voltage
450 kW - 1300 kW
50/ 60 Hz
3000 rpm or 3600 rpm
IP55, IP54, IP23
Safety monitoring
Anti surge switch:
Temp. switch:
Pressure probe:
Temperature probe:
Oil level guard:
At inlet
At Inlet, when measuring max temp of 65o C
In oil reservoir
In oil reservoir, at oil cooler, in enclosure
In oil sump
For Dual Point Control:
Temperature:
At inlet
Pressure:
Differential pressure between P1 and P2
Auxiliaries
Oil cooler:
Electrical actuators:
Blow off valve:
Cooling fan:
Check valve:
Oil for gear box:
With air or water as cooling media
Blow off valve, inlet guide vane, diffuser vanes
Butterfly valve with additional silencer
Enclosure cooling
Dual flap, body: Grey cast iron GG25, Plates: CuAl9Ni
Approx 570 liters, type see STS document 930870005
Material specifications
Casing:
Impeller:
Gearwheels:
Shaft fast:
Shaft slow:
Coupling:
Filter material:
Machine mounts:
Bearings:
Outer volute: Ductile cast iron
Inner volute and Gearbox housing: Grey cast iron
High strength aluminum alloy AlCu2MgNi
High tensile 15CrNi6
High tensile 15CrNi6
High tensile 34CrNiMo6
Rexnord with safe guard
Icalon
St. SIS 1312, for damping natural rubber hardness 60
All shafts are equipped with hydrodynamic bearings
Material: copper alloy with white metal film
Standards
Test Procedure:
Quality:
Functional test:
ISO 5389 & ASME PTC10
ISO 9001
STS standard
Optional Auxiliaries
Vibration monitoring:
FloAmp :
Profibus:
Master control panel:
Geared Turbocompressors
Answers for energy
Accelerometer
Indirect flow measurement
For communication and interface
For compressors to run at cascade control
Published by and copyright © 2012:
Siemens AG
Energy Sector
Freyeslebenstrasse 1
91058 Erlangen, Germany
Siemens A/S, Turbomachinery Solutions
Allégade 4
DK-3000 Helsingør
Denmark
For more information, please contact
Phone: +45 49 21 14 00
Fax:
+45 49 21 52 25
Email: [email protected]
All rights reserved. Trademarks mentioned in this
document are the property of Siemens AG,
its affiliates or their respective owners.
Subject to change without prior notice.
The information in this document
contains general descriptions of the
technical options available, which may
not apply in all cases. The required
technical options should therefore
be specified in the contract.
Version: 20 February 2012
Geared Turbocompressors
Answers for energy