PDF 24 Volt In Micro Datasheet

Micro Family
24 V Input
Actual size:
2.28 x 1.45 x 0.5 in
57,9 x 36,8 x 12,7 mm C
S
®
US
C
NRTL
US
DC-DC Converter Module
Features
Applications
• DC input range: 18 - 36 V
• Isolated output
• Operation to 16 V at 75% power
Industrial and process control, distributed power, medical, ATE, communications,
defense, aerospace.
•
•
•
•
•
•
•
•
•
•
•
after startup
Input surge withstand: 50 V for 100 ms
DC output: 3.3 – 48 V
Programmable output: 10 to 110%
Regulation: ±0.4% no load to full load
Efficiency: Up to 89%
Maximum operating temp: 100°C, full load
Power density: up to 91 W per cubic inch
Height above board: 0.43 in. (10,9 mm)
Parallelable, with N+M fault tolerance
Low noise ZCS/ZVS architecture
RoHS Compliant (with F or G pin option)
Product Overview
These DC-DC converter modules use
advanced power processing, control and
packaging technologies to provide the
performance, flexibility, reliability and cost
effectiveness of a mature power component.
High frequency ZCS/ZVS switching
provides high power density with low
noise and high efficiency.
For details on proper operation please refer to:
Design Guide & Applications Manual for Maxi, Mini, Micro Family.
Absolute Maximum Ratings
Parameter
Rating
Unit
+In to -In voltage
-0.5 to +53
Vdc
PC to -In voltage
-0.5 to +7.0
Vdc
PR to -In voltage
-0.5 to +7.0
Vdc
SC to -Out voltage
-0.5 to +1.5
Vdc
Isolation voltage
in to out
3000
Vrms
Test voltage
in to base
1500
Vrms
Test voltage
500
Vrms
Operating Temperature
out to base
-55 to +100
°C
Storage Temperature
-65 to +125
°C
500 (260)
°F (°C)
Pin soldering temperature
Mounting torque
Part Numbering
e.g. V24C12T100BL2
Product Type
V = Standard
S = Enhanced
efficiency
(avail. ≤12
Vout only)
Output Voltage
3 V 3 = 3.3 V
5 = 5V
8 = 8V
12 = 12 V
15 = 15 V
24 = 24 V
28 = 28 V
36 = 36 V
48 = 48 V
Notes
24C
Product Grade Temperatures (°C)
Grade
Operating
Storage
E
=
- 10 to +100
- 20 to +125
C
=
- 20 to +100
- 40 to +125
T
=
- 40 to +100
- 40 to +125
H
=
- 40 to +100
- 55 to +125
M
=
- 55 to +100
- 65 to +125
750 (390)
°F (°C)
5 (0.57)
in-lbs (N-m)
Test voltage
M-Grade
M-Grade
<5 sec; wave solder
<7 sec; hand solder
6 each
B
Vout
3.3 V
5V
8V
12 V
15 V
24 V
28 V
36 V
48 V
Output Power
Pout
75 W, 50 W
125 W, 100 W, 50 W
100 W
150 W, 100 W, 50 W
150 W, 100 W, 50 W
150 W,100 W, 50 W
150 W, 100 W, 50 W
100 W, 50 W
150 W, 100 W, 50 W
24 V Micro Family
Rev 6.2
vicorpower.com
Page 1 of 15
03/2016
800 927.9474
Pin Style
Finish
Blank: Short
Tin/Lead
L: Long
Tin/Lead
S: Short ModuMate Gold
N: Long ModuMate
Gold
F: Short RoHS
Gold
G: Long RoHS
Gold
K: Extra Long RoHS Gold
Baseplate
Blank: Slotted
2: Threaded
3: Through-hole
24 V Input
MODULE FAMILY ELECTRICAL CHARACTERISTICS
Electrical characteristics apply over the full operating range of input voltage, output load (resistive) and baseplate temperature,
unless otherwise specified. All temperatures refer to the operating temperature at the center of the baseplate.
MODULE INPUT SPECIFICATIONS
Parameter
Min
Typ
Max
Unit
Operating input voltage
18
24
36
Vdc
50
Vdc
17.9
Vdc
Input surge withstand
Undervoltage turn-on
17.5
Undervoltage turn-off
14.8
15.3
Overvoltage turn-off/on
36.3
37.8
Vdc
Disabled input current
Notes
<100 ms
Modules will operate to 16 Vin after startup at >17.9 V.
Below 18 V, available power is reduced to 75% of max
rating.
39.6
Vdc
4.0
mA
PC pin low
Max
Unit
Notes
±1
% Vout nom.
Nominal input; full load; 25°C
Low line to high line; full load
MODULE OUTPUT SPECIFICATIONS
Parameter
Min
Typ
Output voltage setpoint
Line regulation
±0.02
±0.20
%
Temperature regulation
±0.002
±0.005
% /°C
Power sharing accuracy
±2
±5
%
10 to 100% of full load
%
Of nominal output voltage. For trimming below 90%
of nominal, a minimum load of 10% of maximum
rated power may be required.
Programming range
10
110
+Out to –Out — Absolute Maximum Ratings
3.3 V
5V
8V
12 V
15 V
24 V
28 V
36 V
48 V
-0.5 to 4.7
-0.5 to 7.0
-0.5 to 10.9
-0.5 to 16.1
-0.5 to 20.0
-0.5 to 31.7
-0.5 to 36.9
-0.5 to 47.1
-0.5 to 62.9
Over operating temperature range
Vdc
Vdc
Vdc
Vdc
Vdc
Vdc
Vdc
Vdc
Vdc
Externally applied
Externally applied
Externally applied
Externally applied
Externally applied
Externally applied
Externally applied
Externally applied
Externally applied
Note: For important information relative to applications where the converter modules are subject to continuous dynamic loading,
contact Vicor applications engineering at 800-927-9474.
Thermal Resistance and Capacity
Parameter
Min
Typ
Max
Unit
Baseplate to sink; flat, greased surface
0.24
°C/Watt
Baseplate to sink; thermal pad (P/N 20265)
0.21
°C/Watt
Baseplate to ambient
10.9
°C/Watt
Baseplate to ambient; 1000 LFM
2.8
°C/Watt
Thermal capacity
48
Watt-sec/°C
24 V Micro Family
Rev 6.2
vicorpower.com
Page 2 of 15
03/2016
800 927.9474
24 V Input
MODULE FAMILY ELECTRICAL CHARACTERISTICS (CONT.)
MODULE CONTROL SPECIFICATIONS
Parameter
Min
Typ
Max
Unit
Notes
PRIMARY SIDE (PC = Primary Control; PR = Parallel)
PC bias voltage
current limit
5.50
1.5
5.75
2.1
6.00
3.0
Vdc
mA
PC current = 1.0 mA
PC voltage = 5.5 V
PC module disable
2.3
2.6
2.9
Vdc
Switch must be able to sink ≥4 mA. See Fig. 2
4
7
ms
0.5
Vavg
UV, OV, OT, module fault. See Figs. 3 and 5
PC module enable delay
PC module alarm
PC resistance
0.9
1.0
1.1
MΩ
See Fig. 3, converter off or fault mode
PR emitter amplitude
5.7
5.9
6.1
Volts
PR load >30 Ω, < 30 pF
PR emitter current
150
PR receiver impedance
375
500
625
Ω
PR receiver threshold
2.4
2.5
2.6
Volts
Minimum pulse width: 20 ns
12
modules
Without PR buffer amplifier
mA
PR drive capability
25°C
SECONDARY SIDE (SC = Secondary Control)
SC bandgap voltage
1.21
1.23
1.25
Vdc
SC resistance
990
1000
1010
Ω
SC capacitance
SC module alarm
Referenced to –Sense
0.033
µF
0
Vdc
With open trim; referenced to –Sense. See Fig. 7
Unit
Notes
MODULE GENERAL SPECIFICATIONS
Parameter
Min
Isolation test voltage (in to out)*
3000
Vrms
Complies with reinforced insulation requirements
Isolation test voltage (in to base)*
1500
Vrms
Complies with basic insulation requirements
Isolation test voltage (out to base)*
500
Vrms
Complies with operational insulation requirements
Isolation resistance
Typ
Max
10
MΩ
Weight (E, C, T grade)
1.9
(52.8)
2.1
(59.3)
2.3
(65.8)
ounces
(grams)
Weight (H, M grade)
2.1
(58.7)
2.3
(65.2)
2.5
(71.7)
ounces
(grams)
Temperature limiting
100
115
Agency approvals
°C
in to out, in to baseplate, out to baseplate
See Figs. 3 and 5. Do not operate coverter >100 C.
UL60950-1, EN60950-1, CSA60950-1, IEC60950-1.
With appropriate fuse in series with the +Input
cURus, cTÜVus, CE
* Isolation test voltage, 1 minute or less.
Note:
Specifications are subject to change without notice.
24 V Micro Family
Rev 6.2
vicorpower.com
Page 3 of 15
03/2016
800 927.9474
24 V Input
MODULE SPECIFIC OPERATING SPECIFICATIONS
3.3 Vout, 75 W (e.g. S24C3V3C75BL, V24C3V3C75BL)
Parameter
Efficiency
S24C3V3C75BL (enhanced efficiency)
V24C3V3C75BL (standard efficiency)
Ripple and noise
Output OVP setpoint
Dissipation, standby
Load regulation
Load current
Current limit
Short circuit current
Min
Typ
84.6
80.0
86.2
81.6
140
4.3
4
±0.02
4.14
0
23.1
15.8
26.1
26.1
Max
Unit
%
Notes
Nominal input; full load; 25°C
175
4.46
6
±0.4
22.72
30.7
30.7
mV
Volts
Watts
%
Amps
Amps
Amps
p-p; Nominal input; full load; 20 MHz bandwidth
25°C; recycle input voltage or PC to restart (>100 ms off)
No load
No load to full load; nominal input
Max
Unit
Notes
Output voltage 95% of nominal
Output voltage < 250 mV
3.3 Vout, 50 W (e.g. S24C3V3C50BL, V24C3V3C50BL)
Parameter
Efficiency
S24C3V3C50BL (enhanced efficiency)
V24C3V3C50BL (standard efficiency)
Ripple and noise
Output OVP setpoint
Dissipation, standby
Load regulation
Load current
Current limit
Short circuit current
Min
Typ
82.6
75.0
84.0
79.2
240
4.3
1.6
±0.02
%
17.5
17.5
300
4.46
3
±0.2
15.15
20.6
20.6
mV
Volts
Watts
%
Amps
Amps
Amps
Min
Typ
Max
Unit
85.0
83.0
86.5
84.5
150
6.25
4.3
±0.02
4.14
0
15.5
10.6
Nominal input; full load; 25°C
p-p; Nominal input; full load; 20 MHz bandwidth
25°C; recycle input voltage or PC to restart (>100 ms off)
No load
No load to full load; nominal input
Output voltage 95% of nominal
Output voltage <250 mV
5 Vout, 125 W (e.g. S24C5C125BL, V24C5C125BL)
Parameter
Efficiency
S24C5C125BL (enhanced efficiency)
V24C5C125BL (standard efficiency)
Ripple and noise
Output OVP setpoint
Dissipation, standby
Load regulation
Load current
Current limit
Short circuit current
%
28.8
28.8
188
6.5
5.3
±0.2
25.0
33.8
33.8
mV
Volts
Watts
%
Amps
Amps
Amps
Min
Typ
Max
Unit
85.9
84.0
87.4
85.7
100
6.25
3.2
±0.02
6.0
0.0
25.5
17.5
Notes
Nominal input; full load; 25°C
p-p Nominal input full load 20 MHz bandwidth
25°C; recycle input voltage or PC to restart (>100 ms off)
No load
No load to full load nominal input
Output voltage 95% of nominal
Output voltage <250 mV
5 Vout, 100 W (e.g. S24C5C100BL, V24C5C100BL)
Parameter
Efficiency
S24C5C100BL (enhanced efficiency)
V24C5C100BL (standard efficiency)
Ripple and noise
Output OVP setpoint
Dissipation, standby
Load regulation
Load current
Current limit
Short circuit current
6.03
0
20.4
2
23
23
%
125
6.47
4.8
±0.2
20
27
27
mV
Volts
Watts
%
Amps
Amps
Amps
Notes
Nominal input; full load; 25°C
p-p; Nominal input; full load; 20 MHz bandwidth
25°C; recycle input voltage or PC to restart (>100 ms off)
No load
No load to full load; nominal input
Output voltage 95% of nominal
Output voltage < 250 mV
24 V Micro Family
Rev 6.2
vicorpower.com
Page 4 of 15
03/2016
800 927.9474
24 V Input
MODULE SPECIFIC OPERATING SPECIFICATIONS (CONT.)
5 Vout, 50 W (e.g. S24C5C50BL, V24C5C50BL)
Parameter
Efficiency
S24C5C50BL (enhanced efficiency)
V24C5C50BL (standard efficiency)
Ripple and noise
Output OVP setpoint
Dissipation, standby
Load regulation
Load current
Current limit
Short circuit current
Min
Typ
86.5
83.0
87.8
84.5
80
6.25
1.3
±0.02
Max
Unit
%
Notes
Nominal input; full load; 25°C
mV
Volts
Watts
%
Amps
Amps
Amps
p-p; Nominal input; full load; 20 MHz bandwidth
25°C; recycle input voltage or PC to restart (>100 ms off)
No load
No load to full load; nominal input
11.5
11.5
100
6.47
2.1
±0.2
10
13.5
13.5
Min
Typ
Max
Unit
Notes
86.0
85.0
89.0
86.4
145
9.7
3
±0.02
6.03
0
10.2
2
Output voltage 95% of nominal
Output voltage < 250 mV
8 Vout, 100 W (e.g. S24C8C100BL, V24C8C100BL)
Parameter
Efficiency
S24C8C100BL (enhanced efficiency)
V24C8C100BL (standard efficiency)
Ripple and noise
Output OVP setpoint
Dissipation, standby
Load regulation
Load current
Current limit
Short circuit current
9.36
0
12.7
8.75
14.4
14.4
%
182
10.1
3.4
±0.2
12.5
16.9
16.9
mV
Volts
Watts
%
Amps
Amps
Amps
Max
Unit
Nominal input; full load; 25°C
p-p; Nominal input; full load; 20 MHz bandwidth
25°C; recycle input voltage or PC to restart (>100 ms off)
No load
No load to full load; nominal input
Output voltage 95% of nominal
Output voltage <250 mV
12 Vout, 150 W (e.g. S24C12C150BL, V24C12C150BL)
Parameter
Efficiency
S24C12C150BL (enhanced efficiency)
V24C12C150BL (standard efficiency)
Ripple and noise
Output OVP setpoint
Dissipation, standby
Load regulation
Load current
Current limit
Short circuit current
Min
Typ
88.0
87.5
89.5
88.8
170
14.3
3.7
±0.02
13.8
0
12.8
8.8
14.4
14.4
%
Notes
Nominal input; full load; 25°C
212
14.8
4.5
±0.2
12.5
16.9
16.9
mV
Volts
Watts
%
Amps
Amps
Amps
p-p Nominal input full load 20 MHz bandwidth
25°C; recycle input voltage or PC to restart (>100 ms off)
No load
No load to full load nominal input
Max
Unit
Notes
Output voltage 95% of nominal
Output voltage <250 mV
12 Vout, 100 W (e.g. S24C12C100BL, V24C12C100BL)
Parameter
Efficiency
S24C12C100BL (enhanced efficiency)
V24C12C100BL (standard efficiency)
Ripple and noise
Output OVP setpoint
Dissipation, standby
Load regulation
Load current
Current limit
Short circuit current
Min
Typ
88.7
87.0
90.2
88.4
209
14.3
4.4
±0.02
13.7
0
8.5
1.09
9.59
9.59
%
262
14.9
6.1
±0.2
8.33
10.9
10.9
mV
Volts
Watts
%
Amps
Amps
Amps
Nominal input; full load; 25°C
p-p; Nominal input; full load; 20 MHz bandwidth
25°C; recycle input voltage or PC to restart (>100 ms off)
No load
No load to full load; nominal input
Output voltage 95% of nominal
Output voltage < 250 mV
24 V Micro Family
Rev 6.2
vicorpower.com
Page 5 of 15
03/2016
800 927.9474
24 V Input
MODULE SPECIFIC OPERATING SPECIFICATIONS (CONT.)
12 Vout, 50 W (e.g. S24C12C50BL, V24C12C50BL)
Parameter
Efficiency
S24C12C50BL (enhanced efficiency)
V24C12C50BL (standard efficiency)
Ripple and noise
Output OVP setpoint
Dissipation, standby
Load regulation
Load current
Current limit
Short circuit current
Min
Typ
87.8
87.5
89.2
88.5
80
14.3
1.8
±0.02
13.7
0
4.25
2.91
4.8
4.8
Max
Unit
%
Notes
Nominal input; full load; 25°C
100
14.9
2.6
±0.2
4.17
5.63
5.63
mV
Volts
Watts
%
Amps
Amps
Amps
p-p; Nominal input; full load; 20 MHz bandwidth
25°C; recycle input voltage or PC to restart (>100 ms off)
No load
No load to full load; nominal input
Max
Unit
%
mV
Volts
Watts
%
Amps
Amps
Amps
Notes
Nominal input full load 25°C
p-p Nominal input full load 20 MHz bandwidth
25°C; recycle input voltage or PC to restart (>100 ms off)
No load
No load to full load nominal input
Unit
%
mV
Volts
Watts
%
Amps
Amps
Amps
Notes
Nominal input; full load; 25°C
p-p; Nominal input; full load; 20 MHz bandwidth
25°C; recycle input voltage or PC to restart (>100 ms off)
No load
No load to full load; nominal input
Unit
%
mV
Volts
Watts
%
Amps
Amps
Amps
Notes
Nominal input; full load; 25°C
p-p; Nominal input; full load; 20 MHz bandwidth
25°C; recycle input voltage or PC to restart (>100 ms off)
No load
No load to full load; nominal input
Output voltage 95% of nominal
Output voltage < 250mV
15 Vout, 150 W (e.g. V24C15C150BL)
Parameter
Efficiency
Ripple and noise
Output OVP setpoint
Dissipation, standby
Load regulation
Load current
Current limit
Short circuit current
Min
88.0
17.1
0.0
10.2
7.0
Typ
89.6
152.0
17.8
3.9
±0.02
11.5
11.5
190.0
18.4
5.0
±0.2
10.0
13.5
13.5
Output voltage 95% of nominal
Output voltage <250 mV
15 Vout, 100 W (e.g. V24C15C100BL)
Parameter
Efficiency
Ripple and noise
Output OVP setpoint
Dissipation, standby
Load regulation
Load current
Current limit
Short circuit current
Min
89.0
17.1
0
6.8
4.66
Typ
90.0
100
17.8
4.6
±0.02
7.67
7.67
Max
125
18.5
7
±0.2
6.67
8.67
8.67
Output voltage 95% of nominal
Output voltage < 250 mV
15 Vout, 50 W (e.g. V24C15C50BL)
Parameter
Efficiency
Ripple and noise
Output OVP setpoint
Dissipation, standby
Load regulation
Load current
Current limit
Short circuit current
Min
88.0
17.1
0
3.39
2.33
Typ
89.4
160
17.8
1.8
±0.02
3.83
3.83
Max
200
18.5
2.6
±0.2
3.33
4.5
4.5
Output voltage 95% of nominal
Output voltage < 250mV
24 V Micro Family
Rev 6.2
vicorpower.com
Page 6 of 15
03/2016
800 927.9474
24 V Input
MODULE SPECIFIC OPERATING SPECIFICATIONS (CONT.)
24 Vout, 150 W (e.g. V24C24C150BL)
Parameter
Efficiency
Ripple and noise
Output OVP setpoint
Dissipation, standby
Load regulation
Load current
Current limit
Short circuit current
Min
87.3
27.1
0.0
6.4
4.4
Typ
88.3
100
28.1
4.0
±0.02
7.2
7.2
Max
150
29.1
5.0
±0.2
6.3
8.4
8.4
Unit
%
mV
Volts
Watts
%
Amps
Amps
Amps
Notes
Nominal input; full load; 25°C
p-p; Nominal input; full load; 20 MHz bandwidth
25°C; recycle input voltage or PC to restart (>100 ms off)
No load
No load to full load; nominal input
Unit
%
mV
Volts
Watts
%
Amps
Amps
Amps
Notes
Nominal input; full load; 25°C
p-p; Nominal input; full load; 20 MHz bandwidth
25°C; recycle input voltage or PC to restart (>100 ms off)
No load
No load to full load; nominal input
Unit
%
mV
Volts
Watts
%
Amps
Amps
Amps
Notes
Nominal input; full load; 25°C
p-p; Nominal input; full load; 20 MHz bandwidth
25°C; recycle input voltage or PC to restart (>100 ms off)
No load
No load to full load; nominal input
Output voltage 95% of nominal
Output voltage <250 mV
24 Vout, 100 W (e.g. V24C24C100BL)
Parameter
Efficiency
Ripple and noise
Output OVP setpoint
Dissipation, standby
Load regulation
Load current
Current limit
Short circuit current
Min
87.0
27.1
0
4.25
2.91
Typ
88.6
70
28.1
3.6
±0.02
4.8
4.8
Max
88
29.1
5.4
±0.2
4.17
5.67
5.42
Output voltage 95% of nominal
Output voltage <250 mV
24 Vout, 50 W (e.g. V24C24C50BL)
Parameter
Efficiency
Ripple and noise
Output OVP setpoint
Dissipation, standby
Load regulation
Load current
Current limit
Short circuit current
Min
87.0
27.1
0
2.12
1.45
Typ
88.6
80
28.1
2
±0.02
2.39
2.39
Max
100
29.1
3
±0.2
2.08
2.81
2.81
Output voltage 95% of nominal
Output voltage < 250mV
28 Vout, 150 W (e.g. V24C28C150BL)
Parameter
Efficiency
Ripple and noise
Output OVP setpoint
Dissipation, standby
Load regulation
Load current
Current limit
Short circuit current
Min
88.0
31.6
0
5.5
3.8
Typ
89.0
100
32.7
4.2
±0.02
6.2
6.2
Max
150
33.8
6.2
±0.2
5.4
7.2
7.2
Unit
%
mV
Volts
Watts
%
Amps
Amps
Amps
Notes
Nominal input; full load; 25°C
p-p; Nominal input; full load; 20 MHz bandwidth
25°C; recycle input voltage or PC to restart (>100 ms off)
No load
No load to full load; nominal input
Output voltage 95% of nominal
Output voltage < 250 mV
24 V Micro Family
Rev 6.2
vicorpower.com
Page 7 of 15
03/2016
800 927.9474
24 V Input
MODULE SPECIFIC OPERATING SPECIFICATIONS (CONT.)
28 Vout, 100 W (e.g. V24C28C100BL)
Parameter
Efficiency
Ripple and noise
Output OVP setpoint
Dissipation, standby
Load regulation
Load current
Current limit
Short circuit current
Min
88.0
31.5
0
3.64
0.5
Typ
89.0
85
32.7
3.3
±0.02
4.12
4.12
Max
107
33.9
5
±0.2
3.57
5
5
Unit
%
mV
Volts
Watts
%
Amps
Amps
Amps
Notes
Nominal input; full load; 25°C
p-p; Nominal input; full load; 20 MHz bandwidth
25°C; recycle input voltage or PC to restart (>100 ms off)
No load
No load to full load; nominal input
Unit
%
mV
Volts
Watts
%
Amps
Amps
Amps
Notes
Nominal input; full load; 25°C
p-p; Nominal input; full load; 20 MHz bandwidth
25°C; recycle input voltage or PC to restart (>100 ms off)
No load
No load to full load; nominal input
Unit
%
mV
Volts
Watts
%
Amps
Amps
Amps
Notes
Nominal input; full load; 25°C
p-p; Nominal input; full load; 20 MHz bandwidth
25°C; recycle input voltage or PC to restart (>100 ms off)
No load
No load to full load; nominal input
Unit
%
mV
Volts
Watts
%
Amps
Amps
Amps
Notes
Nominal input; full load; 25°C
p-p; Nominal input; full load; 20 MHz bandwidth
25°C; recycle input voltage or PC to restart (>100 ms off)
No load
No load to full load; nominal input
Output voltage 95% of nominal
Output voltage < 250 mV
28 Vout, 50 W (e.g. V24C28C50BL)
Parameter
Efficiency
Ripple and noise
Output OVP setpoint
Dissipation, standby
Load regulation
Load current
Current limit
Short circuit current
Min
87.5
31.5
0
1.82
1.25
Typ
89.0
80
32.7
1.8
±0.02
2.06
2.06
Max
100
33.9
2.7
±0.2
1.78
2.42
2.42
Output voltage 95% of nominal
Output voltage < 250mV
36 Vout, 100 W (e.g. V24C36C100BL)
Parameter
Efficiency
Ripple and noise
Output OVP setpoint
Dissipation, standby
Load regulation
Load current
Current limit
Short circuit current
Min
86.0
40.4
0
2.83
1.94
Typ
87.1
32
41.9
3.7
±0.02
3.2
3.2
Max
40
43.4
4.3
±0.2
2.78
3.76
3.76
Output voltage 95% of nominal
Output voltage <250 mV
36 Vout, 50 W (e.g. V24C36C50BL)
Parameter
Efficiency
Ripple and noise
Output OVP setpoint
Dissipation, standby
Load regulation
Load current
Current limit
Short circuit current
Min
84.0
40.4
0
1.41
0.97
Typ
84.9
27
41.9
1.8
±0.02
1.6
1.6
Max
34
43.4
2.3
±0.2
1.39
1.88
1.88
Output voltage 95% of nominal
Output voltage <250 mV
24 V Micro Family
Rev 6.2
vicorpower.com
Page 8 of 15
03/2016
800 927.9474
24 V Input
MODULE SPECIFIC OPERATING SPECIFICATIONS (CONT.)
48 Vout, 150 W (e.g. V24C48C150BL)
Parameter
Efficiency
Ripple and noise
Output OVP setpoint
Dissipation, standby
Load regulation
Load current
Current limit
Short circuit current
Min
87.9
53.8
0.0
3.2
2.2
Typ
88.9
100
55.7
3.7
±0.02
3.8
3.8
Max
150
57.6
5.7
±0.2
3.1
4.2
4.2
Unit
%
mV
Volts
Watts
%
Amps
Amps
Amps
Notes
Nominal input; full load; 25°C
p-p Nominal input full load 20 MHz bandwidth
25°C; recycle input voltage or PC to restart (>100 ms off)
No load
No load to full load nominal input
Output voltage 95% of nominal
Output voltage <250 mV
48 Vout, 100 W (e.g. V24C48C100BL)
Parameter
Efficiency
Ripple and noise
Output OVP setpoint
Dissipation, standby
Load regulation
Load current
Current limit
Short circuit current
Min
86.2
53.7
0
2.12
1.46
Typ
87.7
100
55.7
3
±0.02
2.4
2.4
Max
125
57.7
5
±0.2
2.08
2.81
2.81
Unit
%
mV
Volts
Watts
%
Amps
Amps
Amps
Notes
Nominal input; full load; 25°C
p-p; Nominal input; full load; 20 MHz bandwidth
25°C; recycle input voltage or PC to restart (>100 ms off)
No load
No load to full load; nominal input
Unit
%
mV
Volts
Watts
%
Amps
Amps
Amps
Notes
Nominal input; full load; 25°C
p-p; Nominal input; full load; 20 MHz bandwidth
25°C; recycle input voltage or PC to restart (>100 ms off)
No load
No load to full load; nominal input
Output voltage 95% of nominal
Output voltage < 250 mV
48 Vout, 50 W (e.g. V24C48C50BL)
Parameter
Efficiency
Ripple and noise
Output OVP setpoint
Dissipation, standby
Load regulation
Load current
Current limit
Short circuit current
Min
86.0
53.7
0
1.06
0.72
Typ
87.2
120
55.7
2.1
±0.02
1.2
1.2
Max
150
57.7
3
±0.2
1.04
1.41
1.66
Output voltage 95% of nominal
Output voltage < 250 mV
24 V Micro Family
Rev 6.2
vicorpower.com
Page 9 of 15
03/2016
800 927.9474
24 V Input
BASIC MODULE OPERATION
C2*
4.7nF
C4*
4.7nF
+IN
F1*
+OUT
PC
SC
C1*
0.2µF
PR
–IN
–OUT
C3*
4.7nF
C5*
4.7nF
For C1 – C5, keep leads and connections short.
Figure 1 — Basic module operation requires fusing, grounding, bypassing capacitors.
* See Maxi, Mini, Micro Design Guide.
Comprehensive Online Application Information
The Design Guide and Applications Manual includes:
• Application circuits
• Design requirements
• EMC considerations
• Current sharing in power arrays
• Thermal performance information
• Recommended soldering methods
• Accessory modules – filtering, rectification, front-ends
• Mounting options
...and more.
CLICK HERE TO VIEW
DESIGN GUIDE
Also at vicorpower.com
• PowerBench online configurators
• Over 20 Application Notes
• Online calculators – thermal, trimming, hold-up
• PDF data sheets for ALL Vicor products
24 V Micro Family
Rev 6.2
vicorpower.com
Page 10 of 15
03/2016
800 927.9474
24 V Input
PRIMARY CONTROL - PC PIN
Module Enable/Disable
Module Alarm
The module may be disabled by pulling PC to 0 V (2.3 V
max) with respect to the –Input. This may be done with an
open collector transistor, relay, or optocoupler. Converters
may be disabled with a single transistor or relay either directly
or via “OR’ing” diodes for 2 or more converters. See Figure 2.
The module contains “watchdog” circuitry which monitors
input voltage, operating temperature and internal operating
parameters. In the event that any of these parameters are
outside of their allowable operating range, the module will
shut down and PC will go low. PC will periodically go high
and the module will check to see if the fault (as an example,
Input Undervoltage) has cleared. If the fault has not been
cleared, PC will go low again and the cycle will restart. The
SC pin will go low in the event of a fault and return to its normal state after the fault has been cleared. See Figures 3 and 5.
Primary Auxiliary Supply
During normal operation only, the PC Pin can source 5.7 V @
1.5 mA. In the example shown in Figure 4, PC powers a module enabled LED.
+IN
Disable
PC
PC
PR
PR
SW1
1M
–IN
–IN
Disable = PC < 2.3 V
[a]
Figure 2 — Module enable/disable.
+OUT
Auto
Restart
50 Ω
2-20 ms typ.
f(VIN)
SW2
SW3
5.7 Vdc
(0-3 mA)
SC
1K
6K
1.23
Vdc
SW1, 2, & 3 shown
in "Fault" position
–OUT
Not applicable for 300 Vdc Input family
Figure 3 — PC/SC module alarm logic.
+IN
Fault
PC
PC
"Module
Enabled"
Input Undervoltage
Input Overvoltage [a]
Over Temperature
Module Faults
+IN
40 μs typ.
5.7 V
4 kΩ
PR
SC
–IN
1.23 V
Figure 5 —PC/SC module alarm timing.
Figure 4 — LED on-state indicator.
+IN
Optocoupler
2-20 ms typ.
+OUT
Comparator
PC
SC
4k
Alarm
PR
–IN
–OUT
Figure 6 —Isolated on-state indicator.
1.00 V
Figure 7 — Secondary side on-state indicator.
24 V Micro Family
Rev 6.2
vicorpower.com
Page 11 of 15
03/2016
800 927.9474
24 V Input
SECONDARY CONTROL - SC PIN
PARALLEL BUS - PR PIN
Output Voltage Programming
Parallel Operation
The output voltage of the converter can be adjusted or
programmed via fixed resistors, potentiometers or voltage
DACs. See Figure 8.
The PR pin supports paralleling for increased power with N+1
(N+M) redundancy. Modules of the same input voltage, output
voltage, and power level will current share if all PR pins are
suitably interfaced.
Compatible interface architectures include the following:
+OUT
RU
Trim Up
Error
Amp
1 kΩ
SC
Load
RD
Trim Down
0.033 μF
–OUT
1.23 V
AC coupled single-wire interface. All PR pins are connected to
a single communication bus through 0.001 µF (500 V)
capacitors. This interface supports current sharing and is fault
tolerant except for the communication bus. Up to three
converters may be paralleled by this method. See Figure 9.
Transformer coupled interface. For paralleling four or more
converters a transformer coupled interface is required. See
Figure 10.
For details on parallel operation please refer to the
RD (ohms) =
Design Guide & Applications Manual for Maxi, Mini, Micro Family.
1,000 Vout
Vnom – Vout
4.7 nF
RU (ohms) = 1,000 (Vout –1.23) Vnom – 1,000
1.23 (Vout – Vnom)
+
+IN
0.2 μF
0.001 μF Z1*
Figure 8 — Output voltage trim down and trim up circuit.
–
PC
PR
Module 1
–IN
Low inductance
ground plane
or bus
Trim Down
4.7 nF
4.7 nF
1. This converter is not a constant power device – it has a
constant current limit. Hence, available output power is
reduced by the same percentage that output voltage is
trimmed down. Do not exceed maximum rated output current.
2. The trim down resistor must be connected between the SC
and pins. Do not bypass the SC pin directly with a
capacitor.
Trim Up
1. The converter is rated for a maximum delivered power. To
ensure that maximum rated power is not exceeded, reduce
maximum output current by the same percentage increase in
output voltage.
2. The trim up resistor must be connected between the SC
and pins. Do not bypass the SC pin directly with a
capacitor.
+IN
0.2 μF
0.001 μF Z1*
Module 2
PR
–IN
4.7 nF
Parallel
Bus
Figure 9 — AC coupled single-wire interface.
* See Maxi, Mini, Micro Design Guide.
4.7 nF
+
+IN
0.2 μF
T1
Z1*
PC
Module 1
PR
–IN
–
4.7 nF
3. Do not trim the converter above maximum trim range
(typically +10%) or the output over voltage protection
circuitry may be activated.
4.7 nF
+IN
0.2 μF
T2
Z1*
Trim resistor values calculated automatically:
On-line calculators for trim resistor values are available on the
vicor website at:
asp.vicorpower.com/calculators/calculators.asp?calc=1
Resistor values can be calculated for fixed trim up, fixed trim
down and for variable trim up or down.
PC
PC
Module 2
PR
–IN
4.7 nF
Parallel
Bus
Figure 10 — Transformer-coupled interface.
24 V Micro Family
Rev 6.2
vicorpower.com
Page 12 of 15
03/2016
800 927.9474
24 V Input
PARALLEL BUS /
VOLTAGE DROP COMPENSATION
• The +Out and –Out
power buses should be
designed to minimize
and balance parasitic
impedance from each
module output to the
load.
+S
R7 21.0 k
R1
SC
+OUT
Module #2
trimmed
down 2 %
L
O
A
D
–OUT
• At the discretion of the
power system designer,
a subset of all modules
within an array may be
configured as slaves by
connecting SC to –Out.
SC
Ground
Plane
–OUT
R3
2.55 k
R11
36.5 k
U2
R5
1.00 k TLV431
R6
C1
1.65 k 470 pF
C2
0.22 µF
R9
R8
4.02 k
Vcc
200 mV
U3
LM10 Gnd
R Load
R10
1.24 k
–S
–Out
See Component Selection section below.
• This module is designed for point of load regulation, where remote sensing
is not required. Active voltage drop compensator, as shown here, may be
used in applications with significant distribution losses.
+OUT
Module #3
trimmed
down 4 %
U1
R2
PS2701
SC
C3
R4
+
–OUT
+Out
–
SC
+
Plane
–
+OUT
Module #1
Designated
Master
• Do not use output
OR’ing diodes with
MicroMods.
Please consult with the Micro Family Isolated Remote Sense Application Note
for additional information.
Figure 11 — N+1 module array output connections.
Figure 12 — Voltage drop compensation.
PIN STYLES*
Designator
Description
Finish
Notes
(None)
Short
Tin/Lead
Requires in-board, mounting
L
Long
Tin/Lead
On-board mounting for 0.065" boards
S
Short ModuMate
Gold
SurfMate or in-board socket mounting
N
Long ModuMate
Gold
On-board socket mounting
F
Short RoHS
Gold
Select for RoHS compliant in-board solder, socket, or SurfMate mounting
G
Long RoHS
Gold
Select for RoHS compliant on-board solder or socket mounting
K
Extra Long RoHS
Gold
Select for RoHS compliance on-board mounting for thicker PCBs
(not intended for socket or Surfmate mounting)
* Pin style designator follows the “B” after the output power and precedes the baseplate designator.
Ex. V24C12T100BN2 — Long ModuMate Pins
24 V Micro Family
Rev 6.2
vicorpower.com
Page 13 of 15
03/2016
800 927.9474
24 V Input
MECHANICAL DRAWINGS
No.
1
2
3
4
5
Converter Pins
Function Label
+In
+
Primary
PC
Control
Parallel
PR
–In
–
–Out
–
6
Secondary
Control
SC
7
+Out
+
DIMENSION L
PIN SHORT – .55±.015 [14.0±.38]
PIN LONG–– .63±.015 [16.0±.38]
PIN EXTRA LONG–––- .71±.015 [18.0±.38]
NOTES:
1. MATERIAL:
BASE: 6000 SERIES ALUMINUM
COVER: LCP, ALUMINUM 3003 H14
PINS:
RoHS PINS GOLD PLATE 30 MICRO INCH MIN; NON-RoHS
PINS:
TIN/LEAD 90/10 BRIGHT
2. DIMENSIONS AND VALUES IN BRACKETS ARE METRIC
3. MANUFACTURING CONTROL IS IN PLACE TO ENSURE THAT THE SPACING
BETWEEN THE MODULES LABEL SURFACE TO THE PRINTED CIRCUIT BOARD
OF THE APPLICATION RANGES FROM DIRECT CONTACT (ZERO), TO THE
MAXIMUM GAP AS CALCULATED FROM THE TOLERANCE STACK-UP
AND IS NOT SUBJECT NEGATIVE TOLERANCE ACCUMULATION
Figure 13 — Module outline
ALL MARKINGS
THIS SURFACE
0.062 ±0.010
1,57 ±0,25
PCB THICKNESS
0.800*
INBOARD
SOLDER
MOUNT
20,32
0.525*
13,34
PLATED
THRU HOLE
DIA
0.275*
6,99
0.145*
3,68
LONG PIN STYLE
0.094 ±0.003
2,39 ±0,08
0.133
3,38
1
2
3
6
PINS STYLES
SOLDER:TIN/LEAD PLATED
MODUMATE: GOLD PLATED COPPER
RoHS: GOLD PLATED COPPER
FOR SOLDERING METHODS AND PROCEDURES
PLEASE REFER TO THE MAXI, MINI, MICRO
DESIGN GUIDE.
1.734**
44,04
50,80
7
ALUMINUM
BASEPLATE
4
2.000*
R
SHORT PIN STYLE
(7X) 0.094 ±0.003
2,39 ±0,08
ONBOARD
SOLDER
MOUNT
5
Unless otherwise specified,
dimensions are in inches
mm
0.06
(4X)
1,5
.400*
10,16
1.090**
27,69
*DENOTES TOL = ±0.003
±0,08
0.45
11,5
0.53
13,5
Decimals
Tol.
0.XX
±0.01
0.XXX
±0.005
±0.25
**PCB WINDOW
±0.127
Figure 14 — PCB mounting specifications
24 V Micro Family
Rev 6.2
vicorpower.com
Page 14 of 15
03/2016
800 927.9474
Angles
±1°
24 V Input
Vicor’s comprehensive line of power solutions includes high density AC-DC and DC-DC modules and
accessory components, fully configurable AC-DC and DC-DC power supplies, and complete custom
power systems.
Information furnished by Vicor is believed to be accurate and reliable. However, no responsibility is assumed by Vicor for its use. Vicor makes no
representations or warranties with respect to the accuracy or completeness of the contents of this publication. Vicor reserves the right to make
changes to any products, specifications, and product descriptions at any time without notice. Information published by Vicor has been checked and
is believed to be accurate at the time it was printed; however, Vicor assumes no responsibility for inaccuracies. Testing and other quality controls are
used to the extent Vicor deems necessary to support Vicor’s product warranty. Except where mandated by government requirements, testing of all
parameters of each product is not necessarily performed.
Specifications are subject to change without notice.
Vicor’s Standard Terms and Conditions
All sales are subject to Vicor’s Standard Terms and Conditions of Sale, which are available on Vicor’s webpage or upon request.
Product Warranty
In Vicor’s standard terms and conditions of sale, Vicor warrants that its products are free from non-conformity to its Standard Specifications (the
“Express Limited Warranty”). This warranty is extended only to the original Buyer for the period expiring two (2) years after the date of shipment
and is not transferable.
UNLESS OTHERWISE EXPRESSLY STATED IN A WRITTEN SALES AGREEMENT SIGNED BY A DULY AUTHORIZED VICOR SIGNATORY, VICOR DISCLAIMS
ALL REPRESENTATIONS, LIABILITIES, AND WARRANTIES OF ANY KIND (WHETHER ARISING BY IMPLICATION OR BY OPERATION OF LAW) WITH
RESPECT TO THE PRODUCTS, INCLUDING, WITHOUT LIMITATION, ANY WARRANTIES OR REPRESENTATIONS AS TO MERCHANTABILITY, FITNESS FOR
PARTICULAR PURPOSE, INFRINGEMENT OF ANY PATENT, COPYRIGHT, OR OTHER INTELLECTUAL PROPERTY RIGHT, OR ANY OTHER MATTER.
This warranty does not extend to products subjected to misuse, accident, or improper application, maintenance, or storage. Vicor shall not be liable
for collateral or consequential damage. Vicor disclaims any and all liability arising out of the application or use of any product or circuit and assumes
no liability for applications assistance or buyer product design. Buyers are responsible for their products and applications using Vicor products and
components. Prior to using or distributing any products that include Vicor components, buyers should provide adequate design, testing and operating safeguards.
Vicor will repair or replace defective products in accordance with its own best judgment. For service under this warranty, the buyer must contact
Vicor to obtain a Return Material Authorization (RMA) number and shipping instructions. Products returned without prior authorization will be
returned to the buyer. The buyer will pay all charges incurred in returning the product to the factory. Vicor will pay all reshipment charges if the
product was defective within the terms of this warranty.
Life Support Policy
VICOR’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS
PRIOR WRITTEN APPROVAL OF THE CHIEF EXECUTIVE OFFICER AND GENERAL COUNSEL OF VICOR CORPORATION. As used herein, life support
devices or systems are devices which (a) are intended for surgical implant into the body, or (b) support or sustain life and whose failure to perform
when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in a significant injury to the
user. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the
failure of the life support device or system or to affect its safety or effectiveness. Per Vicor Terms and Conditions of Sale, the user of Vicor products
and components in life support applications assumes all risks of such use and indemnifies Vicor against all liability and damages.
Intellectual Property Notice
Vicor and its subsidiaries own Intellectual Property (including issued U.S. and Foreign Patents and pending patent applications) relating to the products described in this data sheet. No license, whether express, implied, or arising by estoppel or otherwise, to any intellectual property rights is
granted by this document. Interested parties should contact Vicor's Intellectual Property Department.
Vicor Corporation
25 Frontage Road
Andover, MA, USA 01810
Tel: 800-735-6200
Fax: 978-475-6715
email
Customer Service: [email protected]
Technical Support: [email protected]
24 V Micro Family
Rev 6.2
vicorpower.com
Page 15 of 15
03/2016
800 927.9474