SKS 355N B6C 240 V16 SU Electrical Characteristics Symbol Conditions min Electrical Data TAMBIENT = 45°C ; No overload ID Maximum DC current VAC Maximum AC voltage (+/-10%) VBUS DC Bus voltage Maximum stack power PTOTAL Stack power loss (TAMBIENT = 45°C) PLOSS Environnmental Data Symbol Thyristor Stud stack Conditions typ max 355 500 670 240 min Mechanical Data SEMIKRON document number.revision.version Drawing Approximate total weight Weight Installation altitude without derating Altitude IEC 60529 Protection Pollution Degree EN 50178 Unit A VAC VDC kW W typ max 10052002.01.B ~21.497 1 000 IP00 2 Unit kg m - SEMISTACK® CLASSICS - B6C Three phase controlled rectifier Stack Protection Symbol Preliminary Data RC Circuit Ordering No. Description 08785015 SKS 355N B6C 240 V16 SU Features Type R C Conditions min RC in parallel with each electrical switch Resistance (11W) typ max Unit RC32 100 0.1 Ohm µF 30 400 A V kA²s Fuses Size IN RMS UN • Non-isolated power stacks • SKT 300/16 • Heatsink P1/200 M24 • Natural cooling • RC circuit included • Fuses with microswitches I²t 1 fuse per phase, with microswitches Caliber Nominal voltage (IEC) Total at Un at room temperature (approx. 20…25°C ) 690 126 Typical Applications • Regulated power supplies • Alternator excitation • Motor control Remarks This technical information specifies semiconductor devices but promises no characteristics. No warranty or guarantee, expressed or implied, is made regarding delivery, performance or suitability. B6C © by SEMIKRON Rev. 1 - 06.08.2015 1 SKS 355N B6C 240 V16 SU Dimensions This technical information specifies semiconductor devices but promises no characteristics. No warranty or guarantee expressed or implied is made regarding delivery, performance or suitability. © by SEMIKRON Rev. 1 - 06.08.2015 2