High Power Resistive Products Resistors AVX introduces its line of High Power Resistive Products. All products are designed and manufactured at our ISO 9001 Facilities. ELECTRICAL SPECIFICATIONS Resistance: 50 and 100 Ω standard (10 Ω - 200 Ω available) Resistance Tolerance: ±5% standard (±2% available) Power: 2 Watts through 250 Watts Operating Temperature Range: -55ºC to +150ºC Temperature Coefficient: < 150 ppm/ºC Low Capacitance MECHANICAL SPECIFICATIONS Package: Surface Mount Chips, Chips, Leaded Chips, Flanged Substrate Material: Aluminum Nitride Process: Thin Film Resistive Material: Tantalum Terminals: Silver Cover: Alumina Mounting Flange: 100% Cu, Ni or Ag Plated Mechanical Tolerance: ±0.13 (0.005) SMT and Chip products, supplied on Tape and Reel Non-Magnetic (exception RP4 and RP5 Style Surface Mount Resistors) RoHS Compliant POWER DERATING Power Dissipation 100% 80 60 Rated Safe Operating Range 40 20 0 -50˚C -25˚C 0˚C +25˚C +50˚C 75˚C 100˚C Heat Sink Temperature (°C) 4 125˚C 150˚C High Power Resistive Products Resistors LEADED CHIP RESISTORS – RP7 SERIES GENERAL SPECIFICATIONS L Resistance: 50 and 100 Ω standard (contact factory for custom resistance values) Resistive Tolerance: ±5% standard (2% available) Operating Temp. Range: -55ºC to +150ºC Temperature Coefficient: <150 ppm/ºC Resistive Elements: Proprietary Thin Film Substrate Material: Aluminum Nitride Lead Terminals: Silver Cover: Alumina RoHS Compliant Non-Magnetic W A 6.35 (0.250) TYP. T 0.10 (0.004) TYP. 2.03 (0.080) MAX. mm (inches) mm (inches) AVX Part Number* RP72010RxxxxJTBK RP72335RxxxxJTBK RP72525RxxxxJTBK RP73725RxxxxJTBK RP73737RxxxxJTBK W ±0.25 (0.010) 2.54 (0.100) 8.89 (0.350) 6.45 (0.245) 6.35 (0.250) 9.40 (0.370) L ±0.25 (0.010) 5.08 (0.200) 5.84 (0.230) 6.22 (0.245) 9.53 (0.375) 9.40 (0.370) T ±0.13 (0.005) 1.02 (0.040) 1.02 (0.040) 1.02 (0.040) 1.02 (0.040) 1.02 (0.040) A 1.02 1.02 1.02 1.02 1.02 (0.040) (0.040) (0.040) (0.040) (0.040) Capacitance (pF) 1.0 3.15 2.0 4.15 6.0 Power Max** (Watts) 30W 50W 60W 150W 250W * xxxx denotes Ohm value. ** Test Condition: Chip soldered to a large copper carrier whose surface is at 100ºC; maximum rated power applied. HOW TO ORDER RP7 2010 R AVX Series Case Size See chart above Type R = Resistor XXXX J T BK Value 0050 = 50Ω 0100 = 100Ω Tolerance J = ±5% G = ±2% Terminal T = Silver Packaging BK = Plastic Carrier Contact factory for custom ratings and sizes. POWER DERATING Power Dissipation 100% 80 60 Rated Safe Operating Range 40 20 0 -50˚C -25˚C 0˚C +25˚C +50˚C 75˚C 100˚C 125˚C 150˚C Heat Sink Temperature (°C) 7