VERIFICATION OF COMPLIANCE This Verification of Compliance is hereby issued to the product designated below. Product DC / DC Power Converter Model MAU401; MAU402; MAU403; MAU404; MAU405; MAU406; MAU411; MAU412; MAU413; MAU414; MAU415; MAU416 Brand Applicant MINMAX TECHNOLOGY CO., LTD. No. 18, Sin-Sin Road, An-Ping Industrial District, Tainan, 702, Taiwan, R.O.C. Manufacturer MINMAX TECHNOLOGY CO., LTD. No. 18, Sin-Sin Road, An-Ping Industrial District, Tainan, 702, Taiwan, R.O.C. Applicable Standard(s) EN 55011: 2009+A1: 2010 EN 60601-1-2: 2007+AC: 2010 IEC 61000-4-2: 2008 IEC 61000-4-3: 2010 IEC 61000-4-4: 2012 IEC 61000-4-5: 2014 IEC 61000-4-6: 2013 IEC 61000-4-8: 2009 Reference No. T150313N01-E Test Laboratory Compliance Certification Services Inc. (Tainan Lab.) No.8,Jiucengling, Xinhua Dist., Tainan City 712, Taiwan (R.O.C.) This device has been tested and found to comply with the stated standard(s), which is (are) required by the Council Directive of 2004/108/EC. The test results are indicated in the test report and are applicable only to the tested sample identified in the report. Jeter Wu / Assistant Manager Tainan Lab. Date: April 9, 2015 EC-Declaration of Conformity The following equipment: DC / DC Power Converter ( Product Name ) MAU401; MAU402; MAU403; MAU404; MAU405; MAU406; MAU411; MAU412; MAU413; MAU414; MAU415; MAU416 / ( Model Designation / Brand Name ) MINMAX TECHNOLOGY CO., LTD. ( Manufacturer Name ) No. 18, Sin-Sin Road, An-Ping Industrial District, Tainan, 702, Taiwan, R.O.C. ( Manufacturer Address ) is hereby confirmed to comply with the requirements set out in the Council Directive on the Approximation of the Laws of the Member States relating to Electromagnetic Compatibility Directive (2004/108/EC). For the evaluation regarding the Electromagnetic Compatibility (2004/108/EC) the following standards are applied: EN 55011: 2009+A1: 2010 EN 60601-1-2: 2007+AC: 2010 IEC 61000-4-2: 2008 IEC 61000-4-3: 2010 IEC 61000-4-4: 2012 IEC 61000-4-5: 2014 IEC 61000-4-6: 2013 IEC 61000-4-8: 2009 The following manufacturer / importer or authorized representative established within the EUT is responsible for this declaration: ( Company Name ) ( Company Address ) Person responsible for making this declaration: ( Name, Surname ) ( Position / Title ) ( Place ) ( Date ) ( Legal Signature )