Part No. QSCM-5KPSIG-M QSCM manifold, 5000 PSIG analog gauge, 20ft, 2ft hoses, (2) 1/4― MNPT process conn., nylon bag Perform static pressure calibrations using nitrogen with included calibration manifold, pressure gauge and hoses Features • Fine adjustment piston provides precise pressure control instead of trying to make adjustments with a pressure regulator and a needle valve • Soft-seated valves make filling and venting the system very precise • Compact design allows the manifold, gauge adapter and hoses to fit in the included nylon bag • Low volume Quick-test hose, gauge adapter and process connection reduce gas usage and make nitrogen cylinders last longer QSCM-5KPSIG-M • Each kit comes with the 0.25% full scale accuracy reference test gauge, hoses and pressure gauge adapter needed so that you can start calibrating within minutes • Made in U.S.A. Item Includes • Assembly - QSCM Assembly (QSCM) • Gauge - 0-5000 psig Analog Test Gauge (±0.25% full scale accuracy) (GAUG-5000) • Gauge Adapter - 1/4" female NPT x female Quick-test, no check-valve, S.S. (QTHA-2FSA) • Hose - Quick-test 6900 psi hose, S.S. hose ends, 20 ft (6.10 m) long (QSQS-HOS-20ft) • Hose - Quick-test 6900 psi hose, S.S. hose ends, 2 ft (61 cm) long (QSQS-HOS-2ft) • Hose Adapter - 1/4" male NPT x male Quick-test, no check-valve, S.S. (QTHA-2MS0) • Hose Adapter - 1/4" male NPT x male Quick-test, no check-valve, S.S. (QTHA-2MS0) Specifications Pressure Range 0 to 5000 psi (0 to 345 bar) Gauge Pressure Range 0 to 5000 psig Temperature range 0 to 130 °F (-18 to 54 °C) Gauge Temperature range -40 to 140 °F (-40 to 60 °C) Construction Stainless Steel Seal materials Buna-N, Delrin, Teflon Weight 3.28 lb (1.5 kg) Dimensions H: 7.88 in (20.02 cm) x W: 5 in (12.70 cm) x D: 3.78 in (9.60 cm) Ralston Instruments Inc. | ralstoninst.com | Toll Free 800-347-6575 | Phone 440-564-1430 | Fax 440-564-1480