Midium Power Transistors (-30V / -1A) MP6T11 Structure PNP Silicon epitaxial planar transistor Dimensions (Unit : mm) MPT6 (Dual) Features Low saturation voltage V CE (sat) = -0.35V (Max.) (I C / I B= -500mA / -25mA) (1) Tr.1 (2) Tr.1 (3) Tr.2 (4) Tr.2 (5) Tr.2 (6) Tr.1 Applications Low Frequency Amplifier Driver Packaging specifications Type Emitter Base Collector Emitter Base Collector (6) (5) (4) (1) (2) (3) Inner circuit (Unit : mm) Package MPT6 Code TR Basic ordering unit (pieces) 1000 (6) (5) (4) Tr.2 Tr.1 Absolute maximum ratings (Ta=25°C) <It is the same ratings for the Tr.1 and Tr.2> Parameter Collector-base voltage Collector-emitter voltage Emitter-base voltage Collector current DC Pulsed Power dissipation Junction temperature Range of storage temperature Symbol VCBO Limits -30 -30 VCEO VEBO -6 IC -1 ICP *1 -2 *2 PD 2.0 1.4 PD *2 Tj 150 Tstg -55 to 150 Unit V V V A A W/Total W/Element (1) Tr.1 (2) Tr.1 (3) Tr.2 (4) Tr.2 (5) Tr.2 (6) Tr.1 Emitter Base Collector Emitter Base Collector (1) (2) (3) C C *1 Pw=10ms, Single Pulse *2 Mounted on a 40 x 40 x 0.7[mm] ceramic board www.rohm.com ©2010 ROHM Co., Ltd. All rights reserved. 1/5 2010.12 - Rev.A MP6T11 Data Sheet Electrical characteristics (Ta=25°C) <It is the same characteristics for the Tr.1 and Tr.2> Symbol Min. Typ. Max. Unit Collector-emitter breakdown voltage BVCEO -30 - - V IC= -1mA Collector-base breakdown voltage BVCBO -30 - - V IC= -10μA Emitter-base breakdown voltage Parameter Conditions BVEBO -6 - - V IE= -10μA Collector cut-off current ICBO - - -100 nA VCB= -30V Emitter cut-off current IEBO - - -100 nA VEB= -6V VCE(sat) - -150 -350 mV IC= -500mA, I B= -25mA hFE 270 - 680 - VCE= -2V, I C= -100mA fT - 320 - MHz VCE= -2V IE=100mA, f=100MHz Cob - 7 - pF Turn-on time ton * - 60 - ns Storage time tstg * - 160 - ns tf * - 50 - ns Collector-emitter staturation voltage DC current gain Transition frequency Collector output capacitance Fall time VCB= -10V, I E=0A f=1MHz IC= -500mA, I B1= -25mA, _ -5V IB2=25mA, VCC ~ * See switching time test circuit www.rohm.com ©2010 ROHM Co., Ltd. All rights reserved. 2/5 2010.12 - Rev.A MP6T11 Data Sheet Electrical characteristic curves (Ta=25C) Fig.1 Typical Output Characteristics -5.0mA -4.0mA Fig.2 DC Current Gain vs. Collector Current(Ⅰ) -3.0mA -0.50 1000 -0.45 -0.40 -1.5mA DC CURRENT GAIN :hFE COLLECTOR CURRENT :IC[A] Ta=25°C -2.0mA -0.35 -0.30 -1.0mA -0.25 -0.20 -0.15 VCE=-5V -2V 100 IB=-0.5mA -0.10 -0.05 Ta=25°C 0.00 10 0.0 -1.0 -2.0 -3.0 -4.0 -5.0 -1 -10 Fig.4 Collector-Emitter Saturation Voltage vs. Collector Current(Ⅰ) Fig.3 DC Current Gain vs. Collector Current(Ⅱ) 1000 -10 COLLECTOR SATURATION VOLTAGE :VCE(sat)[V] DC CURRENT GAIN :hFE -1000 COLLECTOR CURRENT :IC[mA] COLECTOR TO EMITTER VOLTAGE:VCE[V] Ta=125°C 75°C 25°C -40°C 100 VCE=-2V Pulsed Ta=25°C Pulsed -1 IC/IB=50 20 10 -0.1 -0.01 10 -1 -10 -100 -1 -1000 -10 -100 COLLECTOR CURRENT :IC[mA] COLLECTOR CURRENT :IC[mA] Fig.5 Collector-Emitter Saturation Voltage vs. Collector Current(Ⅱ) Fig.6 Ground Emitter Propagation Characteristics -1000 -1000 -1 VCE=-2V Pulsed COLLECTOR CURRENT :IC[mA] COLLECTOR SATURATION VOLTAGE :VCE(sat)[V] -100 -0.1 Ta=125°C 75°C 25°C -40°C IC/IB=20 Pulsed Ta=125°C 75°C 25°C -40°C -100 -10 -1 -0.01 -1 -10 -100 0 -1000 COLLECTOR CURRENT :IC[mA] www.rohm.com ©2010 ROHM Co., Ltd. All rights reserved. -0.5 -1 -1.5 BASE TO EMITTER VOLTAGE :VBE[V] 3/5 2010.12 - Rev.A MP6T11 Data Sheet Fig.7 Emitter input capacitance vs. Emitter-Base Voltage Collector output capacitance vs.Collector-Base Voltage Fig8. Gain Bandwidth Product vs. Emitter Current 1000 Ta=25°C f=1MHz IC=0A Cib TRANSITION FREQUENCY : fT [MHz] COLLECTOR OUTPUT CAPACITANCE : Cob(pF) EMITTER INPUT CAPACITANCE : Cib(pF) 100 10 Cob 100 Ta=25°C VCE=-2V f=100MHz 1 10 -0.1 -1 -10 -100 10 COLLECTOR - BASE VOLTAGE : VCB (V) EMITTER - BASE VOLTAGE : VEB (V) 100 1000 EMITTER CURRENT :IE[mA] Fig9. SAFE OPERATING AREA -10 COLLECTOR CURRENT : IC (A) 1ms 10ms -1 100ms -0.1 DC （Mounted on a ceramic board) -0.01 Ta=25°C When one element operated Single non repetitive pulse -0.001 -0.1 -1 -10 -100 COLLECTOR TO EMITTER VOLTAGE :VCE(V) www.rohm.com ©2010 ROHM Co., Ltd. All rights reserved. 4/5 2010.12 - Rev.A MP6T11 Data Sheet Switching time test circuit RL=10Ω VIN IB1 IC Pw VCC _ -5V ~ IB2 _ 50μs Pw ~ DUTY CYCLE≦1% IB2 BASE CURENT WAVEFORM IB1 ton tstg tf 90% COLLECTOR CURRENT WAVEFORM IC 10% www.rohm.com ©2010 ROHM Co., Ltd. All rights reserved. 5/5 2010.12 - Rev.A Notice Notes No copying or reproduction of this document, in part or in whole, is permitted without the consent of ROHM Co.,Ltd. The content specified herein is subject to change for improvement without notice. The content specified herein is for the purpose of introducing ROHM's products (hereinafter "Products"). If you wish to use any such Product, please be sure to refer to the specifications, which can be obtained from ROHM upon request. Examples of application circuits, circuit constants and any other information contained herein illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. Great care was taken in ensuring the accuracy of the information specified in this document. However, should you incur any damage arising from any inaccuracy or misprint of such information, ROHM shall bear no responsibility for such damage. The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM and other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the use of such technical information. The Products specified in this document are intended to be used with general-use electronic equipment or devices (such as audio visual equipment, office-automation equipment, communication devices, electronic appliances and amusement devices). The Products specified in this document are not designed to be radiation tolerant. While ROHM always makes efforts to enhance the quality and reliability of its Products, a Product may fail or malfunction for a variety of reasons. Please be sure to implement in your equipment using the Products safety measures to guard against the possibility of physical injury, fire or any other damage caused in the event of the failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM shall bear no responsibility whatsoever for your use of any Product outside of the prescribed scope or not in accordance with the instruction manual. The Products are not designed or manufactured to be used with any equipment, device or system which requires an extremely high level of reliability the failure or malfunction of which may result in a direct threat to human life or create a risk of human injury (such as a medical instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuelcontroller or other safety device). ROHM shall bear no responsibility in any way for use of any of the Products for the above special purposes. If a Product is intended to be used for any such special purpose, please contact a ROHM sales representative before purchasing. If you intend to export or ship overseas any Product or technology specified herein that may be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to obtain a license or permit under the Law. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. ROHM Customer Support System http://www.rohm.com/contact/ www.rohm.com © 2010 ROHM Co., Ltd. All rights reserved. R1010A