Mini Digital MultiMeters + IR Rugged design with built-in IR Thermometer Patented Quickly identify overheating motors or locate hot spots on electrical panels and HVAC vents without contact Common Features: • Large backlit dual LCD with easy-to read digits • Low current capability • Input fuse protection • Auto power off and Data Hold • Complete with test leads, general purpose bead wire temperature probe (Model EX230), and 9V battery Model EX210 • 2000 counts • 4:1 Distance to Target Ratio • Max Hold Model EX230 • 4000 counts • 6:1 Distance to Target Ratio • Advanced functions include Type K Temperature, Capacitance, Frequency, and Duty Cycle • Relative Mode Specifications Display Counts Basic Accuracy (VDC) AC/DC Voltage AC/DC Current Resistance Capacitance Frequency Temperature (IR) Temperature (Type K) Built-in non-contact IR Thermometer quickly identifies hot spots on electrical panels AC/DC Voltage measurements Type K Temperature function (EX230 model) Duty Cycle Continuity / Diode Dimensions Weight EX210 2000 ±0.5% 0.1mV to 600V 0.1μA to 10A 0.1Ω to 20MΩ — — -5 to 446°F (-20 to 230°C) — EX230 4000 ±0.5% 0.1mV to 600V 0.1μA to 10A 0.1Ω to 40MΩ 0.01nF to 100μF 0.001Hz to 10MHz -5 to 446°F (-20 to 230°C) -4 to 1400°F (-20 to 760°C) — 0.1% to 99.9% Yes Yes 5.8x2.9x1.6" (147x76x42mm) 9.17oz (260g) Ordering Information EX210 ..................Autoranging MultiMeter + IR Thermometer EX210-NISTL* ......EX210 with Limited NIST Certificate EX210-NIST ..........EX210 with NIST Certificate EX230 ..................Autoranging MultiMeter + IR Thermometer EX230-NISTL* ......EX230 with Limited NIST Certificate EX230-NIST ..........EX230 with NIST Certificate * Product certifies to all functions except IR Thermometer www.extech.com Specifications subject to change without notice. 01/10/10 - R1 Copyright © 2009-2011 Extech Instruments Corporation. All rights reserved including the right of reproduction in whole or in part in any form.